Envelope Feeder

Windows 7, M601n printer, CE399A Envelope Feeder. Want to control Printer and Feeder from Computer do not want to get up from my chair and put the printer OK button each time I print an Envelope(s).

This looks like a commercial product. The best place to get help for commercial products is the Business Support forum.
The Business Support forums are located here.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

HP LaserJet 600 M601 doesn't want to use envelope feeder

1. HP LaserJet 600 M601
2. Windows XP 32-bit
3. Tries to print to different trays than envelope feeder when envelope jobs are sent to printer, eventually the envelope feeder shows up on the display and user can choose it to print. Then prints OK.
4. New printer.
5. HP LaserJet 600 M601 doesn't want to use envelope feeder:
Driver is configured with correct trays and printer with paper types.
User send a print job with paper size as Envelope #10 to printer, printer prompts for envelopes to be loaded in different trays, after Tray 2, and after Tray 1 then asks user to use the Envelope Feeder, instead of the just immediately printing to the envelope Feeder.
Tray configuration:
Envelope Feeder: Envelope #10, Envelope
Tray 1: Legal, Plain
Tray 2: Letter, Any Type
Tray 3: Letter, Letterhead
Hp LaserJet 600 M601 M603 PCL 6 driver version 61.114.1.10295
Firmware: 2131305_192069

Just got off the phone with HP on the very same issue using a 602dn printer. What ended up fixing my problem was downloading the HP Universal Print Driver ( www.hp.com/go/upd ). You'll want the PS driver, not the PCL6 one. When you exctract it, update your driver to the v5.4 driver. I don't know why that would have fixed it, but it did. Let me know if it works for you.

Printing Envelopes Other Than #10 with HP LaserJet 4240 Envelope Feeder

I'm trying to use an HP LaserJet 4240 and an HP 75-sheet Envelope Feeder to print envelopes from FileMaker Pro. HP's specifications for the envelope feeder note that it accepts "various sizes of envelopes." However, we are unable to specify any size other than #10 envelopes in the print dialog box. #10 envelopes print just fine, but choosing a different envelope size (like C5) in Page Setup and attempting to print brings up an error message saying that only #10 envelopes can be printed and asking if the document should be scaled to fit that size envelope. If you agree and continue printing, the printer shows "Service Error" on its display.
The workaround I've used so far is to put text out to the very edge of the #10 margins in FileMaker and just load larger envelopes. This leaves too large a margin, however, and I'd really like to be able to print to the actual size of a C5 envelope.
I've tried specifying a letter sized sheet of paper and setting the paper feed to "Envelope Feeder" but the printer is smart enough to know that letter paper can't go through the feeder and asks to specify a different tray.
Has anyone succeeded in specifying a custom envelope size that will print via the envelope feeder? I don't want to have to manually feed envelopes into the printer as that's why we purchased the envelope feeder in the first place!
Thanks in advance for any suggestions anyone can offer.

try this FREE little widget - it's the best solution for printing all types of envelopes …
http://www.ambrosiasw.com/utilities/easyenvelopes/
Alan

Can't select envelope feeder on HP LaserJet 4250tv

My office has an iMac running OS 10.6.4. Data and programs were transferred from an older iMac running OS 10.5.8.
The computer will no longer allow you to select the envelope feeder on our HP LaserJet 4250tn. If you try to print an envelope from Word or another program (InTouch With) and select the envelope feeder a message pops up that says "Changing the setting of Paper Source to Envelope Feeder would cause a conflict that cannot be resolved. No change will be made."
None of the other computers using this printer have this problem. There are two other iMacs using it, one running OS 10.5.8.
I'm unable to figure out what the conflict would be so that I can resolve the issue.
If you send the print job it tries to print from tray 1. If you remove the paper from tray 1 first the printer allows you to change the job to the envelope feeder.

I'm having this same issue with a P4015 and envelope feeder.
The printer is managed by MCX and has the envelope feeder checked in the driver tab. The print dialog lets us select the envelope feeder under the "paper feed" settings, but then the error pops up.
Anyone have a way to fix this?

HP Laserjet w Envelope Feeder

Hi there,
I have a power user who needs to print 50-100 envelopes a day. The HP Laserjet P4015 has a dedicated envelope feeder in tray #1, but we cannot seem to get that to work for more than a single envelope. The App is MS Word 2011, but the 2008 version had the same issue.
Any suggestions would be greatly appreciated. I've already posted in the HP and Mactopia forums.
Barn

This issue was a bug in the printer driver for 10.6.4. This has been escalated to Engineering/Development in HP, and they promise it to be resolved in the next update to the drivers. Case 4621417946.

HP Laserjet p4015 auto select envelop feeder

Client machine will not automatically select envelope feeder when printing envelopes. I have two windows 7 clients using the same driver and same versions of software printing to the same Lazerjet P4015 printer. One selects automaticly selects the envelope feeder and the other client does not. The envelope feeder is available for manual selection, but the print job is not automatically directed to the envelope feeder like on the other client machine. I’ve tried reinstalling driver and software with no luck. Any ideas?
Both machines are running windows 7 professional (64bt) and office 2013.

I initially called HP tech support on this issue, and was told that HP's printer drivers for Mac did not support this feature (even though the hardware was capable of it). Turns out that was BS (and the tech support guy I talked to clearly knew very little about it). HP's network printers have a built-in web server. You log-in by going by going to the IP address using Safari or your preferred browser. You can turn on and set up these options, and more, via the web-server. Easy as pie, once you know what to do.

Envelope Feeder for HP Officejet Pro 8500

Does HP (or anyone) make an envelope feeder for the HP Officejet Pro 8500?

HP's drivers for that model are only supported for Tiger and Leopard. If you want to use the printer you will need to upgrade your OS X system.

Bad envelope feeder connection

Get error message: BAD ENVELOPE FEEDER CONNECTION when adding Q2438A envelope feeder to printer.

Do not care what display says. See the links below: http://www2.printerworks.com/cgi-win/tpwall.exe/find?Q2438A http://www2.printerworks.com/cgi-win/tpwall.exe/find?Q2438B B can be used in all models. A is limited to the 4200/4300.

Using Envelope Feeder

I'm trying to print a B5 envelope using an envelope feeder on an HP 4250n. Whenever I try to change the source tray to Envelope Feeder and print I get the following error:
"The Paper Source option, Envelope Feeder, is not available when the destination paper size is set to C31A79FA-689A-4E68-B6D2-C84008F6099B. To scale to fit to #10 Envelope, select Continue. To keep Paper Source at its previous setting, select Cancel."
I've changed the default size for the envelope feeder in printer properties to both B5 or Any Size, and it still gives me the above message and only wants a #10 envelope. Can anyone help?

This looks like a commercial product. The best place to get help for commercial products is the Business Support forum.
The Business Support forums are located here.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Laserjet 600 M601 (CE990A) won't automatically print from envelope feeder

All I want to do is have the envelope automatically print (without me walking over to printer and hitting the OK button).

Figured it out. In Word, under printer options, change feed from to envelope

Officejet 7000 E809A envelope feed

Printer will not feed #10 envelopes. Envelope stops half way thru and rollers spin.

Hello,
Try updating the print driver software from the link below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-77813-2&cc=us&dlc=en&lc=en&...
This may help resolving your issue.
I work for HP.

HP LaserJet 4 with envelope feeder (C2001A)

When printing a letter or document, the printer will print out 2 envelopes with the following printing on it: %12345X@PJL COMMENT HP LaserJet 4 @PJL SET PAGEPROTECT = OFF @PJL SET PAGEPROTECT=AUTO @PJL SET...
A lot of times this occurs when you first turn on the printer. Any ideas on how to stop this. We are going through envelopes like crazy. My employer just put together a new computer for me and installed Windows 7. Thanks.

The HP 4 printer has a JetDirect card in the back of it. The JetDirect card has a 10BaseT ethernet which I connected with an ethernet cable to an airport express base station. The express unit communicates with the main airport unit in my home.
Many years ago I worked for a company that rebuilt macintosh computers and hardware for resale. I rebuilt this HP printer from spare parts and added the JetDirect card at that time and have not had any major problems with the unit until now. It had no problems or printing errors when I was running 10.4.11.
I neglected to mention that after the printer would not work with 10.5.8 I went back and tried to reinstall the optional printer driver package on the original 10.5.1 installation DVD. When this did not work either, I downloaded the HP print driver package available from their website. Could I have somehow screwed this up by installing the incorrect or uncompatible print drivers?
Thank you for your help. I really appreciate it.
Conrad

I can't print a C5 envelope with a gummed flap in tray 1 or the envelope feeder for my Hp4014n

I have a C5 6x9 envelope with a gummed flap that I had been able to print in tray one on my HP 4014n. I had oriented the text on the envelope so that I could turn the envelope around so the gummed flap-which makes the envelope about an inch longer- is facing away from the printer. Since I had my printer serviced I can no longer use tray one. When I try to print the envelope, it gives me a message that the size is mismatched. I have tried all combinations in the paper handling menu for the size and type. I had this same problem when I bought the printer. I remember calling HP and being on the phone for some time. They finally got a combination that worked. I just don't know what it was. I have not changed anything on my computer. I know that the technician must have changed something after I had asked them not to. Any input would be greatly appreciated. Thanks

Okay, thank you . This tells me we may be experiencing an issue with the driver or wireless connection. I suggest using the following steps to delete the printer from device and printers, and the driver from the server properties. 1. In the ‘Devices and Printers’ folder2. Choose ‘Print server properties’.Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window4. Choose the printer you want to uninstall and click ‘Remove’5. Choose 'Remove driver only'6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this. If documents are stuck in the print spooler, you may see an error, cancel any documents pending in the print queue, or try restarting the print spooler, then try to remove the driver from ‘Print server properties’ again. If it still won’t remove the package, restarting the computer and the printer should resolve this ‘in use’ error and allow the driver to be removed. If the you continue to get an 'in use' message follow the steps in the document here; The Specified Printer Driver is Currently in Use
After the driver is removed, open Start > All Programs > HP folder > Printer folder > HP Setup and Software (or the printer icon).
The Setup and software screen will open and you can click on Connect a new printer.
I look forward to hearing back from you again. Let me know the outcome, and we will proceed from there. Thanks.

Envelopes do not feed correctly on my HP5610 All in One printer and return addresses get chopped off

I'm running a Windows 8 64 bit laptop and the feeder seems to grab the paper properly but it cuts off part of the return address all the time. I can push it in maybe and inch or so when the feeder starts to grab the paper and this will correct it, but it will cause a jam if it's pushed in too far. It did this on my previous Windows 7 machine as well.

Hello @gttechnic , and welcome to the HP Forums, I hope you enjoy your experience!
I can see from your post that you are running into envelope feed issues. I'd like to help!
I would recommend performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I'd also recommend the document below:
'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing
Even though you aren't receiving this error, the steps should help.
Please keep me posted, and remember, keep your stick on the ice!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Envelope Printing Incorrectly to HP laserjet

When installing to one of the Mavericks upgrades last year, my old HP laser jet 3700n would no longer print envelopes correctly from either WordMac or from PrintShop3. I blamed the old age of the printer (More than 10 years) and no recent driver made for it. I purchased a new HP LaserJet MFP M476dw but I have the exact same issue. The envelope appears perfect in print preview but when the envelope prints, the text is perpendicular like in portrait mode and mostly off of the envelope. It doesn't matter the size of the envelope. I have tried changing every setting I could find, altering the dimensions to the opposite length/width, changing the orientation of the envelope feed, but I can't get it right. I can't believe I am the only person with this problem. I called HP and after 2 hours on the phone they said they couldn't help me. I'm not very computer literate and really would like help.

envelope template

Envelope Feeder

Similar Messages

Maybe you are looking for