Envelope issue

Hi
I'm trying to make an envelope with 200 rows by 200 columns but without success.
I can make an envelope with 180 rows and 180 columns and the result is available in less twenty seconds.
and if I try 183 by 183 it doesn't work.
I suspect that there is a limit somewhere because 183 * 183 > 32768
Can we expect in the future to build an envelope with a large number or rows and columns ?

so after waiting for 2 weeks to receive my return package from verizon and not being able to get through to return department because of high volume callers, i called a couple of verizon stores to see if i can return my old iphone and get $200 gift card. they said yes even though customer service (*611) told me they can not.
10/13 i took my iphone 4 and my iphone 6 and the box it came in to the verizon store. the lady examined my iphone 4 and took some info off my iphone 6 and ask if i like a $200 gift card or instant credit to my account. i opted for instant credit. no waiting or worrying about return shipping.

Similar Messages

  • Printing Envelopes Issue with HP Officejet Pro 8600

    I have recently purchased the HP Officejet Pro 8600.  I am upgrading from the Photosmart series.  I use Windows 7 64bit operating system.  I have no error messages
    When I print a #10 envelope, the return address in the top left is partially cut off.  I can't seem to adjust the margins to allow for the return address to print.
    Additionally I would like to "save" some custom envelope sizes to accommodate my personal greeting card envelopes.  My other printer allowed for more paper sizes than this one does.
    Can anyone offer any suggestions with either of these issues?
    Darrell

    Hi there dlfant,
    Check out the post here from Travis_C. He has some steps for installing other printer drivers that should give the functionality you are looking for and hopefully address the envelope issue you are experiencing. Give his steps a shot and let us know if it works out for you.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Letters and envelopes issues

    1. I cannot paste names and addresses from my address book into the recipient fields of most envelope and letter style templates offered in Pages (version 2.0.2) even though the Address Book field is enabled in every case. I can do so only in the “formal” and the “festive” envelope styles. Help!
    2. Since it appears that a standard 3 5/8” x 6 1/2” envelope template is not available nor listed, how do make one?

    That is interesting, but where are you talking about? Can you provide a screenshot to help in troubleshooting?

  • How to turn off Manual Feed envelope prompt on printer scrn LaserJet Pro 200 Color MFP M276?

    Somehow, in trying to figure out how to get an envelope to print from the feeder tray (which I found out isn't possible), I turned on something that produces a printer screen prompt that says something like 'Manual Feed" then says the size of envelope and waits for response.  This is every time I print an envelope & it's really a pain and I'm not finding where/how to turn this off.  Can anyone help?  Thanks in advance.

    Hello miebs, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having envelope issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Also, What programs are you printing from?  Does it occur from multiple programs?
    Please let me know what you find.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • I use Smart suite,my printer will not print to #10 envelopes now,just to letter

    I use Smart suite (Lotus) for my business Invoices,and I have always been able to print invoice envelpoes (#10 envelopes) but suddenly ,if I try to print #10 envelopes the printer(c6180) gives me a mismatch paper error,and will only print envelopes to a piece of letter paper ,I have tried everything to rectify this issue,but I am at a loss ....
    A month agao I could not print a PDF file,after placing my issue here it is now resolved .....could this be leading to the #10 envelope issue ? .
    TIA,Jim

    You may want to check your browser settings.  Some updates will disable printer settings.

  • Floating, belly up

    I still have found no solution to the problem of the computer suddenly not passing audio, which seems to have stumped the esteemed members of this forum as well.
    I now have an additional problem. Between the two, the software is completely non-functional.
    MIDI instruments will not play properly. I keep getting stuck notes. Whether playing chords or single notes, no more than a few notes at most can be played without one or more of those notes continuing to play. This is not an envelope issue.
    Starting or stopping the transport —either with the mouse or spacebar— fixes the problem until something is played on a keyboard at which time it happens again.
    At first I thought the problem might be the computer running out of memory. But it is doing this even on a "new" project where nothing —audio or MIDI— has been recorded yet. And no other software is running simultaneously.
    I have tried and checked several MIDI keyboards, they appear to be functioning properly. A different MIDI interface yielded the same results.
    I have tried looking in the manual and searching on the forum and found no reference to stuck notes. Maybe there is another term I am not familiar with or is escaping me.
    I am now out of business.
    And will be until I can either solve these problems or junk the entire system and go back to protools or analog tape.
    Someone may step up and show me just how ignorant I am about this software by supplying an obvious and simple fix, but at this point frustration has won out over hope.
    I thank you in advance for any help anyone may extend.

    I still have found no solution to the problem of the computer suddenly not passing
    audio, which seems to have stumped the esteemed members of this forum as well.
    If you post in a new thread, rather than keeping everything in one thread, then new people coming in cannot see what problem you had, or the discussion to date. So I can't help you on this, as I didn't see the original details.
    MIDI instruments will not play properly. I keep getting stuck notes. Whether playing
    chords or single notes, no more than a few notes at most can be played without one
    or more of those notes continuing to play. This is not an envelope issue.
    You'll need to provide some information on your system. What MIDI interface are you using? What MIDI gear is hooked up to it, in which directions? Does the problem occur in other MIDI software such as Garageband or Live, or is it just related to Logic?
    In Logic, have you tried a default template? (option click on File -> New). Does it do it here?
    Does it do it when you select any track with a MIDI or audio instrument object? If so, what are the settings for the ones that exhibit this behaviour?
    If you are getting stuck notes, then generally one of the following is happening: You've got MIDI loops, where notes you send are getting into MIDI feedback by being sent back out of Logic to your MIDI device, and then looped back into Logic ad infinitum. Or your MIDI interface is misbehaving (driver problems perhaps). Or you've got something going on in Logic's environment that's modifying the incoming MIDI data poorly (eg, you're filtering out note offs). Lastly, check you aren't sending superfluous sustain pedal data that's causing notes to "hang".
    If you've tried it with several keyboards and MIDI interfaces and you still get the same behaviour, that's helpful, as it largely rules out problems with any of those particular devices.

  • M251nw custom envelope printing issue - "cleaning"

    Has anyone got any instructions to print custom envelope sizes for the M251nw using MAC OS? I am using 10.9.2.
    I have set-up the correct custom size in the print dialog box, but it's just not printing out in the right spot. Do I need to download another driver? Also you have to click OK on the printer itself to laod the paper through every time and it does 'clean' itself after each print also. Can this be by-passed?
    Many thanks.

    Hi,
    Please open the document  you are printing click on file and print on the printer properties window
    Paper Size: Use options in this pop-up menu to choose the type of paper currently in your printer’s paper tray this drop down will have custom paper size option you can set your custom paper size here.
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves yours
    I work for HP but my posts and replies are my own.
    Click the Kudos star as a way to say "thank you" for helpful posts.
    I work for HP but my posts and replies are my own.
    Click the Kudos star as a way to say "thank you" for helpful posts.
    Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else .....

  • Envelope printing issues

    I was trying to print an envelope with my new HP printer using Microsoft Word 2008 for Mac. When I press on print, the entire envelope is printed in black ink, covering the entire face of the envelope.
    I checked the settings for the size envelope (#10). I also uninstalled the printer software and downloaded and re-installed the printer software, but the problem still exist.
    Is there an compatibility issue with Yosemite 10.10.3?
    What could be the problem?

    Hello @Blackjack2359, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you're having envelope print issues.   I'd like to assist!
    I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
    Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
    I would also suggest running your Apple updates:  OS X: Updating OS X and Mac App Store apps
    After the updates, I would recommend reinstalling the HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and drivers.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Envelope Schema Issue : Routing failure :No Subscriber is found

    Hi,
    This is my envelope schema:
    This is my original Schema:
    My scenario is as follows:
    I have two orchestration :
    In orchestration A,I am getting a input schema,map that input schema to above envelope schema.Then doing de-batching with the help of call pipeline in orchestration A.I am getting the proper output for orchestration A and saved it to location X.
    In orchestartion B, I am using direct binding, and making filter on receive message context property GL_Journal_SetNumber.
    When I am making a filter on Message Type, it is working fine.
    When  I am making filter on message type then it is pick up the file from message box and working fine but when I am using filter on GL_Journal_SetNumber then it is not pick up the file from message box.
    Any kind of help would be appreciated.
    Is there any alternative solution for this scenario.
    Prakash

    I checked in BizTalk Admin Console --> BizTalk Group ---> New Query---> Subscription and
    got my promoted property there:
    Prakash

  • Envelope Index issue.

    It's me again, sorry. Here's the previous thread that sets this up.
    Not sure if you read my last post to that thread, but I'd taken your advice, Ernie, to try a first attempt at finding my lost mail with the app you mentioned (the demo version). This is a slightly odd aside now: I thought that by replacing the Envelope Index that you'd had me remove last week I could at least retrieve all the basic info without any of the messages themselves (i.e. who sent them and the subject line). Thought that at least I could hang on to those for those three POP mailboxes' last 8 months of mail. The dozen other mailboxes I'd compiled had not been affected by my [original] stupidity and all the messages were there. So, when I did this just now, I now find that ALL of my emails, in every mailbox, have now lost their messages (save the one that says: The message from _____ <____@____.__> concerning “__” has not been downloaded from the server. You need to take this account online in order to download it..
    The only good thing about this current situation is that I now know for certain that I did not lose my emails (I certainly have not erased/deleted any of the messages in all those additional mailboxes), at least not these most recent disappearences. So, maybe I should call tech support on this. Suggestions?
    Thanks, Paul

    It's me again, sorry. Here's the previous thread that sets this up.
    Not sure if you read my last post to that thread, but I'd taken your advice, Ernie, to try a first attempt at finding my lost mail with the app you mentioned (the demo version). This is a slightly odd aside now: I thought that by replacing the Envelope Index that you'd had me remove last week I could at least retrieve all the basic info without any of the messages themselves (i.e. who sent them and the subject line). Thought that at least I could hang on to those for those three POP mailboxes' last 8 months of mail. The dozen other mailboxes I'd compiled had not been affected by my [original] stupidity and all the messages were there. So, when I did this just now, I now find that ALL of my emails, in every mailbox, have now lost their messages (save the one that says: The message from _____ <____@____.__> concerning “__” has not been downloaded from the server. You need to take this account online in order to download it..
    The only good thing about this current situation is that I now know for certain that I did not lose my emails (I certainly have not erased/deleted any of the messages in all those additional mailboxes), at least not these most recent disappearences. So, maybe I should call tech support on this. Suggestions?
    Thanks, Paul

  • Envelope orientation issues

    I cannot create an envelope that I simply retrieve from a file, hit print and get our copier (Toshiba e-studio) to accept. I have to fiddle with the orientation.
    The problem is that I'm using a bypass tray that tests for the correct paper and wants something 4.12" wide (#10 envelope, short side fed).
    I create an envelope using a custom size (called envelope) of 4.12 x 9.5" and then I change the orientation to the right side choice (under Page setup) and hit okay.. Now I print and everything works..
    But these settings are not saved with the document, so I always need to recheck these everytime I use the envelope document. If I forget, I need to go to copier and delete the job.
    I could check the "reverse orientation" box on the printer dialog box, save it as a new setting, but new settings don't save this option..
    I'm setting this up for some office staff so it needs to be pretty simple..
    My thoughts are that Pages is weak in the area of saving this type of info and I might have to purchase custom envelope software.
    dave crabbe

    You think right.
    The problem with Pages not retaining print setup in templates has vexed users here for some time.
    Personally I'd use *Address Book* to print the envelopes, it is quite sophisticated.
    Check out the many features in Address Book's Print dialogue box:
    *Over-printing Pages with Address Book data* > *Format inside Address Book's print dialogue*
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&highlight=addres s+book&mforum=iworktipsntrick
    Also:
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=76&highlight=address +book&mforum=iworktipsntrick
    Peter

  • Envelope Distort Issue

    I'm using envelope distort option under the objects file menu to put some text on a roof top shape but the top of the text is distorting badly. (See attached image) Anyone know why this happen and how to solve this? Any help would be greatly appreciated.

    Select the roof shape & your type,
    then object >> envelope distort >. make with top object.
    I personally like the top image as the logo better if I may say so , distorting the "N" looks like a sagging roof.

  • Envelope printing issue

    My Oficejet Pro L7590 used to print envelopes just fine. Am operating Windows Vista Home Deluxe 64 bit. Now when I attempt to print I get only a tiny portion of the return address on the middle left edge of the envelope. Have checked settings in both MS Word and the printer. I recently found a workaround that involves going into the HP printer preferences settings - features - resizing options and changing the setting to #10 envelope. But I don't want to have to do this every time I want to print an envelope - and back again to print letter size paper!  Can someone help me? Thanks!

    Hi,
    You have to select the envelope size in MS Word. Before print, click Options and change the envelope size. The Custom size will stay there until next change.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP LaserJet 600 M601 doesn't want to use envelope feeder

    1. HP LaserJet 600 M601     
    2. Windows XP 32-bit
    3. Tries to print to different trays than envelope feeder when envelope jobs are sent to printer, eventually the envelope feeder shows up on the display and user can choose it to print.  Then prints OK.
    4. New printer.
    5. HP LaserJet 600 M601 doesn't want to use envelope feeder:
    Driver is configured with correct trays and printer with paper types.
    User send a print job with paper size as Envelope #10 to printer, printer prompts for envelopes to be loaded in different trays, after Tray 2, and after Tray 1 then asks user to use the Envelope Feeder, instead of the just immediately printing to the envelope Feeder.
    Tray configuration:
    Envelope Feeder:  Envelope #10, Envelope
    Tray 1:  Legal,  Plain
    Tray 2:  Letter, Any Type
    Tray 3:  Letter, Letterhead
    Hp LaserJet 600 M601 M603 PCL 6 driver version 61.114.1.10295
    Firmware:  2131305_192069

    Just got off the phone with HP on the very same issue using a 602dn printer.  What ended up fixing my problem was downloading the HP Universal Print Driver ( www.hp.com/go/upd ).  You'll want the PS driver, not the PCL6 one.  When you exctract it, update your driver to the v5.4 driver.  I don't know why that would have fixed it, but it did.  Let me know if it works for you. 

  • Issue in calling a web service from Apps instance

    Hi ,
    I have created a procedure to call a function which gives response by calling a web service URL.
    Requirement is,
    While calling this procedure , the response data has been stored in the table. This is working fine in the back end.
    Now , i call the same through concurrenet program . It is also getting stored but partially.. The exact data is missing ..other default tags are displayed in the column.
    PROCEUDRE:
    create or replace procedure cv_test_GetCityWeather_PROC(cityName in varchar2, country in varchar2 ,errbuf OUT nocopy VARCHAR2,retcode OUT nocopy VARCHAR2) is
    xmlResponse XmlType;
    begin
    xmlResponse := CV_Test_GetCityWeather(cityName,country);
    insert into xx_cv_test values(xmlResponse);
    fnd_file.put_line(fnd_file.log, 'hghghgh');
    EXCEPTION
    WHEN OTHERS THEN
    retcode := 'insert failed';
    fnd_file.put_line(fnd_file.log, 'response of the request is ' );
    --dbms_output.put_line('xmlResponse ' ||xmlResponse);
    end cv_test_getCityweather_proc;
    FUNCTION
    /*<TOAD_FILE_CHUNK>*/
    CREATE OR REPLACE function APPS.CV_Test_GetCityWeather( cityName varchar2, country varchar2 ) return XmlType is
    --// URL to call
    SOAP_URL constant varchar2(1000) := 'http://www.webservicex.net/globalweather.asmx';
    --// SOAP envelope template, containing $ substitution variables
    SOAP_ENVELOPE constant varchar2(32767) :=
    '<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://www.webserviceX.NET">
    <soapenv:Header/>
    <soapenv:Body>
    <web:GetWeather>
    <web:CityName>$CITY</web:CityName>
    <web:CountryName>$COUNTRY</web:CountryName>
    </web:GetWeather>
    </soapenv:Body>
    </soapenv:Envelope>';
    --// we'll identify ourselves using an IE9/Windows7 generic browser signature
    C_USER_AGENT constant varchar2(4000) := 'Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Trident/5.0)';
    --// these variables need to be set if web access
    --// is via a proxy server
    proxyServer varchar2(20) default null;
    proxyUser varchar2(20) default null;
    proxyPass varchar2(20) default null;
    --// our local variables
    soapEnvelope varchar2(32767);
    proxyURL varchar2(4000);
    request utl_http.req;
    response utl_http.resp;
    buffer varchar2(32767);
    soapResponse clob;
    xmlResponse XmlType;
    eof boolean;
    begin
    --// create the SOAP envelope
    soapEnvelope := replace( SOAP_ENVELOPE, '$CITY', cityName );
    soapEnvelope := replace( soapEnvelope, '$COUNTRY', country );
    --// our "browser" settings
    utl_http.set_response_error_check( true );
    utl_http.set_detailed_excp_support( true );
    utl_http.set_cookie_support( true );
    utl_http.set_transfer_timeout( 10 );
    utl_http.set_follow_redirect( 3 );
    utl_http.set_persistent_conn_support( true );
    --// configure for web proxy access if applicable
    if proxyServer is not null then
    proxyURL := 'http://'||proxyServer;
    if (proxyUser is not null) and (proxyPass is not null) then
    proxyURL := Replace( proxyURL, 'http://', 'http://'||proxyUser||':'||proxyPass||'@' );
    end if;
    utl_http.set_proxy( proxyURL, null );
    end if;
    --// make the POST call to the web service
    request := utl_http.begin_request( SOAP_URL, 'POST', utl_http.HTTP_VERSION_1_1 );
    utl_http.set_header( request, 'User-Agent', C_USER_AGENT );
    utl_http.set_header( request, 'Content-Type', 'text/xml; charset=utf-8' );
    utl_http.set_header( request, 'Content-Length', length(soapEnvelope) );
    utl_http.set_header( request, 'SoapAction', 'http://www.webserviceX.NET/GetWeather' );
    utl_http.write_text( request, soapEnvelope );
    --// read the web service HTTP response
    response := utl_http.get_response( request );
    dbms_lob.CreateTemporary( soapResponse, true );
    eof := false;
    loop
    exit when eof;
    begin
    utl_http.read_line( response, buffer, true );
    if length(buffer) > 0 then
    dbms_lob.WriteAppend(
    soapResponse,
    length(buffer),
    buffer
    end if;
    exception when utl_http.END_OF_BODY then
    eof := true;
    end;
    end loop;
    utl_http.end_response( response );
    --// as the SOAP responds with XML, we convert
    --// the response to XML
    xmlResponse := XmlType( soapResponse );
    --dbms_lob.FreeTemporary( soapResponse );
    --insert into xx_cv_test values(xmlResponse);
    return( xmlResponse );
    exception when OTHERS then
    if soapResponse is not null then
    dbms_lob.FreeTemporary( soapResponse );
    end if;
    raise;
    end;
    EXECUTION:
    select cv_test_GetCityWeather( 'Cape Town', 'South Africa' ) from dual
    Result is,
    <?xml version="1.0" encoding="UTF-8"?>
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <soap:Body>
    <GetWeatherResponse xmlns="http://www.webserviceX.NET">
    <GetWeatherResult><?xml version="1.0" encoding="utf-16"?><CurrentWeather> <Location>Cape Town, Cape Town International Airport, South Africa (FACT) 33-59S 018-36E 0M</Location> <Time>May 28, 2013 - 03:00 AM EDT / 2013.05.28 0700 UTC</Time> <Wind> from the NNW (330 degrees) at 7 MPH (6 KT) (direction variable):0</Wind> <Visibility> 4 mile(s):0</Visibility> <SkyConditions> mostly cloudy</SkyConditions> <Temperature> 57 F (14 C)</Temperature> <DewPoint> 53 F (12 C)</DewPoint> <RelativeHumidity> 87%</RelativeHumidity> <Pressure> 30.03 in. Hg (1017 hPa)</Pressure> <Status>Success</Status></CurrentWeather></GetWeatherResult>
    </GetWeatherResponse>
    </soap:Body>
    </soap:Envelope>
    While running Concurrent Program, by providing PARAMETERS : Cape Town, South Africa,
    the result is ,
    <?xml version="1.0" encoding="UTF-8"?>
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <soap:Body>
    <GetWeatherResponse xmlns="http://www.webserviceX.NET">
    <GetWeatherResult>Data Not Found</GetWeatherResult>
    </GetWeatherResponse>
    </soap:Body>
    </soap:Envelope>
    Why the outputs are different for the same procedure..
    Anybody , Please help me to fix this issue.
    Thanks
    Winsky

    duplicate post
    Please see
    Calling webservice from PLSQL
    Please confirm are you the one who post the above thread
    ;) AppsMAsti :)
    sharing is Caring

Maybe you are looking for