Enviroment to Regression Test

Hi,
We are configurating ChaRM in Solman 7.1 SP8.
Ours landscape initial was DES - QAS - PRE - PRD. We had tha plan to do the regression test in PRE production system.
But, we have the need of to create and to release the request in PRE production system.
We want to send to PRD only one request with all deliveries of the period.
Its is possible to execute regression test in PRE ?
Thank you for you attention.
Adriana

Hi Prakhar,
Thank you very much for your attention.
My need is to create a new request with objects lists from multiple requests. Those requests are going with status "test okay".
I don´t like send all individuals request to PRD.
To do this process, we need create and delivery a new request in PRE production enviroment.
Now, we define a new landscape with DEV-QAS-PRD and the ChaRM will control only those enviroments. The fourth enviroment was out of the logical componente.
At the moment, it problem was solved.
Best regards,
Adriana.

Similar Messages

How to do Regression Testing in XI

Hello:
We are doing some patch upgrade for XI from SP13 to SP16 and we are planning to do some regression testing in Dev, then in QA and then in Prod. Are there any steps to take or is there any blog or PDF, links on how to do such regression testing? We have quite a lot of active interfaces.
Thanks.

Yes ,you are right.
If you upgrade new SP, first you need to check is the SP is upgraded correctly. For this you can check SP versions in ABAP stack and J2EE stack.
Next , you need to check the new features of the new SP. This you need to go manually to the atleast some adapters and you can check the features.
SM59 etc are part of Post Intsallation. So this is not required at first site. But it is better to do Readiness Check. These are consider as Regression testing for XI when you are upgrading/Moving the systems into different environment etc.
Atlast you can test end to end scneario to check the availability of Monitoring component.
These things our team has done .
Regards,
Moorthy

Automated Regression Testing

Apologies for putting a more advanced question in a general forum but there is no Topic for QA/Testing (that I know of).
Okay, I've been tasked with finding a solution for fully automated unit, component, system, and regression testing. I realize that sounds like a tall order and can't truly be done. However, I'd like to get as close as possible to being able to test every aspect of our system and thought I'd post to the community for ideas. We have a typical multi-tiered web app. We have a web interface, business logic on the server-side, Web Services, DAO, etc. Naturally, some combination of testing needs to be performed. So I suppose that first I need to make a list of all the (general) types of testing that can be done. So far I have:
- syntax validation
- link checking
- unit testing
- record and playback (robot user for web UI)
- custom scripting (for anything I can't buy a tool for)
- performance monitoring & stress testing
- security testing
- etc.
So I guess my first question is: What other types of testing am I missing here? I honestly think I'll end up with 2-3 sets of tests that hopefully give me good testing coverage. The end goal is to have a nightly build that includes a series of tests which generate reports. So in the morning someone can open the reports and see if anything's really busted. So basically, after the build finishes, the tests should be kicked off. I'd like to use Ant for this but I suppose a cron job could be written or whatever. I'm not worried about that right now.
Anyway, I don't have very specific requirements yet but I'm thinking of breaking my work up into unit, component, and system level testing. My initial thoughts are that I'd need:
1. Unit Testing - Ant would simply kick off all the JUnit tests we have available. This would do basic class level testing and validation.
2. Component Testing - Custom Java code/scripts that would tests some specific functional area. This is open ended in my mind as I'm not that familir with the codebase yet. But an example would be "register a user" or "make a reservation".
3. System Testing - Needs to simuilate a user hitting the web interface and would invoke all tiers. So I'm guessing I need to buy some software product to fill out forms automatically and whatever else.
Can you all let me know if there's anything major I'm missing? What methodologies or tools do you recommend? Any links on good tech articles regarding this? Anything comments or feedback welcome.
Thanks in advance!

I'd recommend adding automated acceptance testing to the list of things to consider. Example:
http://fitnesse.org/
~

Regression testing on PDF output files from Reports?

My current client is looking to do more automated regression testing of the output (content) of their reports, most of which are output from Reports6i into Adobe Acrobat PDF file format. Is anyone currently using or aware of a tool (QARun, WinRunner, etc.) that will do this? (Most of the tools can do a binary comparison of the PDF files that were output, but we need something that will look into the PDF files themselves and tell us where any differences are found in the actual content (text) of the report itself.)
Thanks in advance for any info anyone can provide!
- Bill

Dear Nick,
Just ensure a printer is configured. This can be done by typing in echo $PRINTER at the $Prompt.
If it returns null then configurea printer and i fell this should resolve your problem,
Since it did resolve my problem.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Nick Mavrakis:
I am having some trouble getting pdf output in the unix environment from Reports 6i.
If I kick off a defined report file (.rep) from the command line as follows:
rwrun60 testreport.rep destype=file desformat=pdf desname=testreport.pdf userid=connection_details
I get the following errors:
REP-0004: Warning: Unable to open user preference file.
REP-3300: Fatal error in toolkit.
UI-9: This function call is out of context
If I run the command without the file output options (rwrun60 testreport.rep userid=connection_details) then the report opens up on the screen correctly. From here, if I try to generate a pdf file, I get the following error:
REP-1800: Formatter error.
The report is defined as character type, and is a simple listing of approximately 50 records from a database table. There are no graphics or any pl/sql defined in the report.
Has anyone had similar problems in trying to do this?
Any help is greatly appreciated.
Cheers
Nick<HR></BLOCKQUOTE>
null

Regression test for Controlling area and assets

Hi,
Friends
We are up grading from version 4.7 to ECC 6.0 .In this case we have to do regression test . May i know what are the topics should be tested .Could you give me a brief explanation including the transaction codes.
Waiting for you information
Thanks in advance
Best regards
Medha

Hi
Doing a process oriented testing will be the right apprach.. i.e. Procure to Pay, Order to cash, Manufacturing scenario and month end process of variances, WIP and settlement, payments, With holding tax filings, excise returns, executing your key reports, etc
This way you can be more than sure that the up-gradation is doing its job
Ajay M

ECM - How to open Review for Regression Testing on a regular basis

Hi,
We have implemented ECM for a large corporation that wants to run weekly regression testing on the application (including Portal functionality). A problem occurs with the review period as it is set to the month of August (in table T71ADM08) however to be able to test the application we need to be able to open the review in the testing environment.
Has anyone had similar experience? We would like to avoid the need to transport changes through on a weekly basis opening and then closing the review. The best solution at the moment seems to be creating a custom program that will enable the testers to open and close a review directly in the testing environment.
Any suggestions?
Many thanks,
Kelly.

Hi
For dynamic files you can;
1. either do the DDL on the external table to point to the file with the changing name
2Copy the file to a fixed name before using the external table/maps
3. Use the preprocessor to cat/pipe these files for the external table. See the post here http://blogs.oracle.com/warehousebuilder/2009/06/file_staging_using_external_table_preprocessor.html it shows using gunzip but could simply be doing 'cat' on a bunch of files to standard output
Cheers
David

[svn:bz-4.x] 16147: Fix a few more regression tests on the 4. x branch that were failing when using Spring integration.

Revision: 16147
Revision: 16147
Author:   [email protected]
Date:     2010-05-17 06:18:38 -0700 (Mon, 17 May 2010)
Log Message:
Fix a few more regression tests on the 4.x branch that were failing when using Spring integration.
Modified Paths:
    blazeds/branches/4.x/qa/apps/qa-regress/WEB-INF/src/runtimeconfig/remoteobjects/ROMessage Destination.java
    blazeds/branches/4.x/qa/apps/qa-regress/WEB-INF/src/runtimeconfig/remoteobjects/RuntimeCo nfigurator.java
    blazeds/branches/4.x/qa/resources/webtier/flex_sdk_4/flex-config.xml

Well heres my story. I tried kde4 from extra the last 3 weeks and I like it. I have used xfce for the past 3 years, previous to that gnome. Tried kde but never really liked it. Now I am only using workspace, base, mutimedia and graphics.
Here is what I like.
1- Dolphin, awesome I have used thunar a while and it is great but I love splitview, and fish for ssh (which has been around a while I know), and the ability to mount other partitions on my hdd with a click no fstab entry or nothin'.
2-Pretty, I've used xfce with built in compositor an love the snappiness. But I like desktop grid with kde4 and flipswitch. Compiz-fusion is cool but I prefer not to use I'll take what the DE gives. Plasmoid are cool too.
3- Gwenview is nice too. Use to use gqview, but thumnails are nice.
Looking forward to or lacking
1- Keyboard shortcuts, Yes xbindkeys is there but if I have a DE I want it to do it. They just don't work now.
2- kde4 has windows specific settings, but I can't set the opacity for particular windows , doesn't work.
3- Ram of course is much higher in kde4, but maybe I'm getting old I just don't care as much.

Simple test suite for regression testing

Hi,
I was wondering if anyone has a simple test suite available.
I'm after these main areas:
1. arbitary script lanching (or just firing off ud32 files)
2. database comms (inserting test data, extracting final status)
3. comparison (ala diff) for regression tests.
I have knocked out a partial (i.e. not 100% finished!) one myself in perl, but was wondering what else other people have created .
i'm Looking for insparation / use what has already been done!
Thank in adavance,
Wayne

Subclass the test case itself, and have a factory method to return instances of the correct class you wish to test, or, use a protected instance variable to put it in
e.g
public class TestMyClass extends TestCase {
   public MyClass getMyClass() {
     return new MyClass();
public void testSomething() {
       MyClass myClass = getMyClass();
       assertTrue(myClass.isWorking());
public class TestSubclass extends TestMyClass {
     @Override
     public MyClass getMyClass() {
        return new Subclass(); // assume this extends MyClass
     // all the superclass test methods still get run
}or
public class TestMyClass extends TestCase {
protected MyClass myClass;
public void setup() {
    this.myClass = new MyClass();
public void testSomething() {
       assertTrue(myClass.isWorking());
public class TestSubclass extends TestMyClass {
public void setup() {
    this.myClass = new SubClass();
     // all the superclass test methods still get run
}

Wht is Regression Test?

Hi Experts,
Pls. let me clarify the Regression test? I hv seen it, after hitting the F8 of a FM and even I tried it, then I got some records in my_table of my_FM.
So, pls. let me know,
1 - Wht is Regression test?
2- When we hv to use it?
3-Other than FM, still Where can I see it?
ThanQ.

Hi Srikhar,
Have a look at this link.
http://www.thespot4sap.com/Articles/SAPImplementationRisks_11.asp
Reward if useful.
Thanks
Aneesh.

BW 3.1 to BI 7 Upgrade Non Regression Tests

Dear All,
I am planning a BW 3.1 upgrade to BI 7.
I need to focus on Non-regression tests. In others words, I would like to know what kind of non-regression tests I will have to do to confirm the UAT.
I am not talking here about post-upgrade activities (technical stuff). I am more focused on the current modelisation that has been upgraded (still in 3.x thought).
So far, I identified the following:
__Full Load tests__
By loading a specific month data scope - before and after upgrade - I can confirm the data load processes through the cubes and ODS.
Delta Load tests
I do not know how can I do this (how can I ensure that my R/3 will not change ...)
Queries
I can select some of them to ensure they are still working ...?
What can we have more in the non regression tests?
Thank you for your help
chris

Hi guys
Any thoughts?
Thanks,
Chris

Set of RAW file test images for regression tests

Hello
Does anybody own a broad range of test images which can be shared where most RAW file formats are covered to help making a new plugin stable or do regression tests over different versions of Lightroom or plugin revisions?
Thanks,
Daniel

Hi Daniel,
I haven't seen anyone pull together a complete set of RAWs for this type of testing. Most people only need a few samples of different manufacturers just to ensure their code works OK. I'm curious to know what type of Lightroom plugin would require as an exhaustive a set of tests as you are suggesting.
You've already looked at the dcraw team's work. Might also want to look at Phil Harvey and his exiftool work to see if he has a set of test files available. Or RawTherapee though they might not bother with their own testing since I'm pretty sure they use dcraw under the covers.
I suspect you will need to do some downloading of files from review sites unless one of these big players has files ready for testing. Copyright issues might prevent that. Photography Blog makes it as easy as any of the sites I've found to download RAW sample files so keep them in mind if you run out of luck.
Matt

Automated regression tests on Oracle*Forms

Hi all,
We're looking for a toolset that allows automated regression tests (record/playback) on an Oracle Forms GUI. Something like QuickTest*Pro (previously Winrunner).
Anybody having experience with this ? Thanks for sharing it.

Check tool called DataLoader
http://www.dbload.com/

Command-line Regression Tester

Hello:
I am using the command-line regression testing tool in OPM 10.2 and have a need to parse the resulting XML output file. However, I have noticed that the verbose option does not work when using the XML format of the test reports. Where might I file a feature request for this tool? I am currently having to run the tests twice when an error is detected in our Continuous Integration environment: once to detect test failures using the XML output (parsing the text version just seems like it would become much too brittle), and if failures are detected, another run simply to see the output of the failures. Can anyone point me to someone who may be open to hearing about these types of issues? Please see below examples of the outputs both with the verbose argument...
Thanks in advance!
-Ryan Connolly
XML:
<testsuite failures="0" errors="6" tests="12" skipped="0" time="0" name="ReferenceApp_Eligibility.xprj">
<testcase time="0" name="citizenship - citizen condition A">
<failure>error</failure>
</testcase>
<testcase time="0" name="citizenship - qualified alien condition A">
<failure>error</failure>
</testcase>
<testcase time="0" name="citizenship - alien barred for 5 years Condition B">
<failure>error</failure>
</testcase>
<testcase time="0" name="citizenship - person meets citizenship criteria" />
<testcase time="0" name="citizenship - meets E and not D" />
<testcase time="0" name="citizenship - condition C Emergency Services">
<failure>error</failure>
</testcase>
<testcase time="0" name="eligibleFamilyMembers - ANFCcategoricalRequirementUnder21" />
<testcase time="0" name="residence - resTest">
<failure>error</failure>
</testcase>
<testcase time="0" name="MedicaidChoiceOfCategory - SSI-AABD Requirement-PASS" />
<testcase time="0" name="MedicaidChoiceOfCategory - SSI-AABD Requirement-FAIL">
<failure>error</failure>
</testcase>
<testcase time="0" name="MedicaidChoiceOfCategory - Person satisfies categorical requirement for ANFC" />
<testcase time="0" name="HouseholdComp - New Test Case" />
</testsuite>
Default:
RULEBASE: output\ReferenceApp_Eligibility.zip
TEST SCRIPT: C:\Documents and Settings\ryan.connolly\Desktop\TEMP\OPATEST\opa\Test Scripts\citizenship.tsc
citizen condition A - ERROR
The results for this test case cannot be determined due to the following errors:
* Rulebase does not contain attribute 'b9@4170_citizenship' in entity 'person'. Test case data belonging to this attribu
te has been discarded
qualified alien condition A - ERROR
The results for this test case cannot be determined due to the following errors:
* Rulebase does not contain attribute 'b9@4170_citizenship' in entity 'person'. Test case data belonging to this attribu
te has been discarded
alien barred for 5 years Condition B - ERROR
The results for this test case cannot be determined due to the following errors:
* Rulebase does not contain attribute 'b9@4170_citizenship' in entity 'person'. Test case data belonging to this attribu
te has been discarded
* Rulebase does not contain attribute 'b26@4170_citizenship' in entity 'person'. Test case data belonging to this attrib
ute has been discarded
* Rulebase does not contain attribute 'b11@4170_citizenship' in entity 'person'. Test case data belonging to this attrib
ute has been discarded
* Rulebase does not contain attribute 'b10@4170_citizenship' in entity 'person'. Test case data belonging to this attrib
ute has been discarded
person meets citizenship criteria - PASSED (Failed: 0, Matched: 1 exact, 0 threshold, Ignored: 4)
Match (exact match) - Entity: person[person 1], Attribute: b2@4170_citizenship, Expected Value: true, Actual Value: true
meets E and not D - PASSED (Failed: 0, Matched: 2 exact, 0 threshold, Ignored: 8)
Match (exact match) - Entity: person[person 1], Attribute: b2@4170_citizenship, Expected Value: true, Actual Value: true
Match (exact match) - Entity: person[person 2], Attribute: b2@4170_citizenship, Expected Value: true, Actual Value: true
condition C Emergency Services - ERROR
The results for this test case cannot be determined due to the following errors:
* Rulebase does not contain attribute 'b12@4170_citizenship' in entity 'person'. Test case data belonging to this attrib
ute has been discarded
* Rulebase does not contain attribute 'b13@4170_citizenship' in entity 'person'. Test case data belonging to this attrib
ute has been discarded
TEST SCRIPT: C:\Documents and Settings\ryan.connolly\Desktop\TEMP\OPATEST\opa\Test Scripts\eligibleFamilyMembers.tsc
ANFCcategoricalRequirementUnder21 - PASSED (Failed: 0, Matched: 1 exact, 0 threshold, Ignored: 2)
Match (exact match) - Entity: person[person 1], Attribute: b5@Rules_source_medicaidChoiceOfCategory_doc, Expected Value:
true, Actual Value: true
TEST SCRIPT: C:\Documents and Settings\ryan.connolly\Desktop\TEMP\OPATEST\opa\Test Scripts\residence.tsc
resTest - ERROR
The results for this test case cannot be determined due to the following errors:
* Rulebase does not contain attribute 'b12@Rules_source_residence_doc' in entity 'person'. Test case data belonging to t
his attribute has been discarded
* Rulebase does not contain attribute 'b16@Rules_source_residence_doc' in entity 'person'. Test case data belonging to t
his attribute has been discarded
TEST SCRIPT: C:\Documents and Settings\ryan.connolly\Desktop\TEMP\OPATEST\opa\Test Scripts\MedicaidChoiceOfCategory.tsc
SSI-AABD Requirement-PASS - PASSED (Failed: 0, Matched: 1 exact, 0 threshold, Ignored: 1)
Match (exact match) - Entity: person[person 1], Attribute: b1@Rules_source_medicaidChoiceOfCategory_doc, Expected Value:
true, Actual Value: true
SSI-AABD Requirement-FAIL - ERROR
The results for this test case cannot be determined due to the following errors:
* Rulebase does not contain attribute 'b3@Rules_source_medicaidChoiceOfCategory_doc' in entity 'person'. Test case data
belonging to this attribute has been discarded
* Rulebase does not contain attribute 'b4@Rules_source_medicaidChoiceOfCategory_doc' in entity 'person'. Test case data
belonging to this attribute has been discarded
Person satisfies categorical requirement for ANFC - PASSED (Failed: 0, Matched: 1 exact, 0 threshold, Ignored: 1)
Match (exact match) - Entity: person[person 1], Attribute: b5@Rules_source_medicaidChoiceOfCategory_doc, Expected Value:
true, Actual Value: true
TEST SCRIPT: C:\Documents and Settings\ryan.connolly\Desktop\TEMP\OPATEST\opa\Test Scripts\HouseholdComp.tsc
New Test Case - PASSED (Failed: 0, Matched: 1 exact, 0 threshold, Ignored: 0)
Match (exact match) - Entity: global[global 1], Attribute: b19@Rules_source_caseEligibility_doc, Expected Value: true, A
ctual Value: true

Thanks for taking the time to point this out. We'll put it on the list to fix in a future release. (And apologies for the tardy response.)
Kind regards,
Davin.

CP Regression testing documentation

I am told that there is no documentation available for these tests, and Metalink searches certainly don't find it. Can anyone tell me exactly what these tests do, and where documentation or a MetaLink doc exists?
CP Host Regression Test
CP Java Regression Test
CP PLSQL Regression Test
CP Perl Regression Test
CP Postscript Report Regression Test
CP SQL*Loader Regression Test
CP SQL*Plus Regression Test
CP Spawned Regression Test
CP Text Report Regression Test

Hi;
I am told that there is no documentation available for these tests, and Metalink searches certainly don't find it. Can anyone tell me exactly what these tests do, and where documentation or a MetaLink doc exists?
CP Host Regression Test
CP Java Regression Test
CP PLSQL Regression Test
CP Perl Regression Test
CP Postscript Report Regression Test
CP SQL*Loader Regression Test
CP SQL*Plus Regression Test
CP Spawned Regression Test
CP Text Report Regression TestThose are test which could to define you have any problem wiht those future on your system. If you want to run CP Java Regression Test (also others) you need to follow:
a. System ADministrator Responsibility
b. Requests menu option
c. Run
d. Select from the list of values: CP Java Regression Test concurrent program
Parameters:
Run mode = FULL
Regard
Helios

Updating Solution Manager - Charm Non-regression Tests

Dear Gurus,
we plan to update Solution Manager from SP18 to SP25.
One of our concerns is related to Charm. Actually, due to code changes in the Charm workflow, we'd like to ensure there won't be any regression. what would you suggest?
1) Adding additional mandants to the sandbox system (one for every system in the transport route)
2) Creating virtual systems in TMS
Sincerly,
Ludovic

I will try to clarify the issue.
As regression test, we would like to simulate a Charm workflow within the sandbox environment. The original Workflow is based on validation steps accross DEV - INT - QUA - PPD - PRD.
Question is : can I define virtual systems in TDM/CHARM like I would do to bypass a system during transports in order to simulate our complete landscape?
Kind Regards,
Ludovic

Enviroment to Regression Test

Similar Messages

Maybe you are looking for