Environment config for Triton Rack

Is there any kind soul out there that has their environment configed for Triton Rack and which to share?
I bought Logic 3 years ago. I am a video person and have used other programs before such as Digital Performer. I have an old Ensoniq MR76 keyboard. I understand the basic of midi and audio but the Logic Environment takes me to another land....
I hired a person to help me back than and he could get me setup completely. Computer died and lost all of those settings. I almost cried.. lol lol...
This is what I wish to do. Record into logic using midi from MR76 keyboard and Triton Rack. I would like to record on more than one track using these two devices. For bounces I would come in through my Motu MKII and LunaTec. via firewire. I would like to setup the environment so I can choose the different banks from Triton Rack.
I run a TV station for a college and am the only one doing so I don't really have a lot of time to RTFM. I like manual too. 55-70 hrs a week...

Hi James,
Thanks for your response.
I would like to rephrase my question:
Which server access permissions and tools are recommended / required for a Portal Implementor/Developer?
I am not talking about Portal Roles within the EP environment.
Examples as mentioned before:
Remote Desktop Connection Access
File System Access
Restart Service
Visual Admin
Yoav

Similar Messages

Korg Triton Rack and Logic

Is it possible to connect my Korg Triton Rack to Logic such that when I select a synth (like ES 24) from the drop menu, I can choose the Triton?
I am a bit of a midi ludite and have my Roland Fantom daisy chained to the Korg via an Edirol UM-2 into my Mac. But I'm not realizing the full potential of my gear.
Any help would be appreciated! Thanks in advance,
Chris

ok there is two ways!
1. on the input slot where you would select a logic instrument, selct the external instrument (then put in the midi port and audio input that corresponds to you setup for the triton)
2. from the arrange page select the triton on an audio instrument track
somethings to note:
a. you need to create a multi-instrument in the environment that corresponds to the triton or neither of the above two methods will work.
b. there is advantages and drawbacks to both.
1. if you choose the first method you can use the effects in logic to process the triton(advantage)....drawback you can only use the external instrument 1x per piece of midi hardware.
2. The second method has the advantage of allowing you to use all 16 midi channels on the triton (so you can have 16 dif. patches playing), but you can't process them with logics plugins
Also, if you want to bounce the midi instruments with your song:
It is very easy with the external instrument, but with the other method you will have to record the midi data on an audio track, by selecting the inout of your Triton in the input window of the track and pressing record.....this will give you an audio track of the midi arrangement!
Hope That Helps!
Craig

QoS config for Video Traffic

Hello all,
I have a campus network with several remote sites, at the campus I have a 6509 at the core and 3560 and 3750 switches at the access layer. I do have QoS enable on the 6509 and I am using auto QoS on the 3560 and 3750 switches and all seems to be working fine with my existing VOIP environment. But now as I am in the middle of rolling out a video conferencing solution with the existing QoS config I am experiencing a noticeable delay between audio and video. Example like during a video call I can tell that the voice and the lips of the person speaking are not in synch.
Has anyone run into this issue ? can someone provide me a sample QoS config for the 6509 and 3560/3750 switches ?
P.S. I am using a Tandberg/Codian solution for video conferencing with Tandberg/Codian MCU, IP Gateway, ISDN Gateway and Tandberg endpoints. And both the endpoints and the back-end infrastructure devices and are set for IP Precedence 5.
Thank you very much in advance !!!
Danny

The main concern with configuring your back-end infrastructure devices with IP Precedence value 5 is that the 3560/3750 auto-qos will map this value to Q1 which is ordinarily the strict priority Q.
In most cases auto-qos will also configure or map Video to Q3, you can see this as a majority SRR bandwidth is assigned to the Q.
In order to use the strict priority queue, it has to be enabled on the interface 'priority-queue out', without it Q1 will not be emptied before the others. It will be serviced according to the weight.
With auto-qos Q1 will not have enough bandwidth as it will be assigned to Q3. Therefore you could initially enable priority-queue if not already enabled so that Q1 is emptied first, or you increase the weight.
The next question is whether you are using egress scheduling within the Core? and this conforms to your edge classification for Video?
HTH.
Allan

Config for Production client

Dear all,
I'm a new basis and now I'm working in big project ERP. I have a disturbed about config for Production client.
In scc4 we must set client role is Production and No change allowed for Objects. But in production some time we need do Open and Close Period, or change following business requirement, ... This is not allowed to do in Production client.
How do we config for Production client to cover this requirements ?
Do we need a config client for maintain Production client ? Example: Production client is 500, Config client is 100. When we need Open or Close Period or change anything, we do in 100 and transfer request to 500.
Thank you very much.
Regards,
Thanh.
Do not use text message language, the next time your thread will be deleted.
Read the "Rules of Engagement"
Edited by: Juan Reyes on Dec 1, 2010 11:06 AM

You can customize transaction to be executable although the setting in SCC4 is "productive", this is accomplished by using transaction SOBJ:
Note 1497640 - Open and close periods in productive client
You can theoretically put every customizing view there and make it "executable" in a production system.
Markus

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
 <services>
 <service id="amfphp-flashremoting-service"
 class="flex.messaging.services.RemotingService"
 messageTypes="flex.messaging.messages.RemotingMessage">
 <destination id="amfphp">
 <channels>
 <channel ref="my-amfphp"/>
 </channels>
 <properties>
 <source>*</source>
 </properties>
 </destination>
 </service>
 </services>
 <channels>
 <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
 <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
 </channel-definition>
 </channels>
</services-config>
I think the problem is the line
 <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

Config for Dispatch Intrastat

Hello Experts,
Our client has a manufacturing plant in France which is already in SAP. Now they are planning to come up with another plant in France. We will be creating a new Company Code and Sales Org. My question is that since France is already in SAP and uses Intrastat reporting so do we need to make any config for new Plant/Sales Org or is the Intrastat setting defined at country level only.
Regards,
Karan

Hello Karan,
We are going to create a new Plant as well as a new Sales Organisation. In Intrastat there is one setting where we assign Business Transaction Type to Sales Org/Item Category combination. For the reference Sales Org this setting is already in place so do we need to do this setting for new Sales Org also or does it get copied when we create new sales org with reference to existing sales org?
In my view on the current set up which you are incorporating for new plant at France, there is no need to have new Company Code and Sales organization unless and untill there is some legal requirement at EU(If export process needs to be triggered). There is not much information available on Intrastat functionality but as i understand from you, you create Business transaction type at Intrastat, and then assign business transaction type to Sales organization, My suggestion would be :- most likely you would have to extend and include the newly created Sales Organization for Business transaction type.
Thanks,
Sarthak

Vendor Payment Terms config for 30%advance 70% after GR

Hi Guys,
How to configure Vendor Payment Terms for " Vendor Payment Terms config for 30%advance 70% after GR "
Please suggest your expert comments.
Thanks in advance.
Regards,
Jackie

sappassion2011 wrote:
Hi Guys,
>
> How to configure Vendor Payment Terms for " Vendor Payment Terms config for 30%advance 70% after GR "
>
> Please suggest your expert comments.
>
> Thanks in advance.
>
> Regards,
>
> Jackie
Hi Jackie,
Do them in trxn OME2
Regards
Shiva

What's the best Mac Pro config for Fireworks?

What's the best Mac config for Fireworks?
I can pretty much get whatever Mac I want at work... My boss is sick and tired of watching Fireworks crash all the time... I figure a hefty processor and lots of RAM and maybe a SSD will help…
I should get a Mac Pro right? Which processor?
• Two 2.40GHz 6-Core Intel Xeon processors (12 cores)
• Two 2.66GHz 6-Core Intel Xeon processor (12 cores)
• Two 3.06GHz 6-Core Intel Xeon (12 cores)
Should I get 24GB RAM?? Or is that overkill?
I'll get a 2TB serial hard drive…
I should get a 512 GB solid state drive offered by Apple right?
Or is it possible to get a larger better 3rd party SSD?
And then maybe two 21" Displays… Two 27s seems a little much… or does it?
Thanks in advance.

Oh and what about video cards? Or is Apple's default ok? (I'm not doing hard core PhotoShop retouching or anything).

Dynamic Environment Switching For REPORTS_PATH 11g

Oracle Fusion Middleware 11.1.1.2.0 with Patch Set 2 (11.1.1.3.0) - Linux
Dynamic Environment Switching For REPORTS_PATH doesn't work.
According to documentation B32121-03 (Publishing Reports to the Web with Oracle Reports Services 11g Release 1 (11.1.1) point 8.2.2):
1. comment REPORTS_PATH in reports.sh
2. set enviroment settings in rwserver.conf with REPORTS_PATH and NLS_LANG and defaultEnvId (DEV and PRD with defaultEnvId="DEV")
3. restart reports server
4. run http://mywls:8888/reports/rwservlet?SERVER=rep_wls_reports_mywls_asinst_1&REPORT=testreport.rdf&USERID=user/user1@mydb&DESFORMAT=html&DESTYPE=cache&ENVID=DEV
REP-110: File testreport.rdf cannot be opened.
REP-1070: An error occurred while opening or saving a document.
REP-0110: File testreport.rdf cannot be opened.
The same situation for &ENVID=PRD or without ENVID (as I expect it should work as default - DEV enviroment). File testreport.rdf is located in both paths (/u00/DEV/reports and /u00/PRD/reports)
http://mywls:8888/reports/rwservlet/showenv?server=rep_wls_reports_mywls_asinst_1&authid=oiduser/oiduser1 reads informations from reports.sh file but doesn't read enviroment settings from rwserver.conf (REPORTS_PATH is empty because I comment it in reports.sh).
Where's my problem? Should I set any other setting(s)?
Unfortunately note [231051.1] and other referenced doesn't resolve my problem...
Edited by: user9093781 on 2011-08-23 06:50

Not sure if this helps at all. I just went through a nightmare trying to get 11g forms/reports to work through the forms builder.
What I discovered with that is that I indeed had to set the REPORTS_PATH in rwserver.conf... however there were 3 different files that I ended up having to put it in (not sure if had to be in all 3). And perhaps more importantly, there seems to be an order to how you put these xml statements in the rwserver.conf files.
In my case, it wouldn't work at all until I put it right after the last "<engine id=" statement.
Mine looks something like this (not that this is a snippet of the file in Windows, for running via Forms/Reports Builder):
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" maxEngine="1" minEngine="0" engLife="50"/>
<environment id="default">
 <envVariable value="C:\Oracle\WLS11gR1U4\user_projects\domains\AISworkstation\" name="REPORTS_PATH"/>
 <envVariable value="AMERICAN_AMERICA.WE8ISO8859P1" name="NLS_LANG"/>
 <envVariable value="RRRR-MM-DD" name="NLS_DATE_FORMAT"/>
</environment>
<environment id="windev_xxxxxxxx">
<envVariable name="REPORTS_PATH"
value="M:\ADS\Dvlprs\xxxxxxx\11g\FormsApps\stage;M:\ADS\Dvlprs\xxxxxxx\11g\FormsApps"/>
</environment>
I'm still figuring this all out too (although I did get it working how I need.. just not sure if it is the optimal solution), so I'm not sure how much this will help you. But for sure I can say that there is an order to these XML tags that I'm not so sure was the same (or maybe not enforced) in 10g.
Good luck

What is part number number for 19" rack mount on 526 controller

I am looking for part number for the rack mount kit for a 526 conbtroller - nono is listed on the price sheet

Check out this discussion:
https://supportforums.cisco.com/message/3077633#3077633
Marcos

How to set Environment Settings for J2EE?

hi i don't know java but know a little vb6
i would like make and compile this:
http://java.sun.com/developer/technicalArticles/peer/
i downloaded all components... but can't figure out how to do:
Table 1: Environment Settings for Compiling and Running J2EE Applications
thanks..
Message was edited by:
Hopelessone

You can't enter sites in a list to make Firefox remember names and passwords for specific sites.
If the password manager is enabled (remember passwords is check-marked) then Firefox will ask via a pop-up from the key icon that appears on the location bar whether you want to remember that name and password and that name will then appear in the list in the password manager window.
*http://kb.mozillazine.org/Password_Manager
*https://support.mozilla.org/kb/make-firefox-remember-usernames-and-passwords
Websites can use autocomplete=off to prevent Firefox from saving the name and password. 
You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password in such a case.
*http://kb.mozillazine.org/User_name_and_password_not_remembered

Add file config for hole application?

Hi everyone,
Is there any one worked with build file config for hole fusion adf application? It is similar with web.config in .NET ASP web site. I think in jdeveloper, we can use web.xml for add some parameter but don't know how to read this parameter?
Any help is appreciate!
Thank.

User, please tell us your jdeveloper version!
In general you can read context or innit parameters from web.xml.
You get to them via the servlet context
String databaseHost =getServletContext().getInitParameter("database.host");
And to get to the servlet context use
FacesContext ctx = FacesContext.getCurrentInstance(); ServletContext servletContext = (ServletContext) ctx.getExternalContext().getContext();
Timo

Hal config for Elantech/Eee 1000h touchpad?

I've tried using the one that's in the 901-install Wiki page, and find it massively flakey (sorry no offense to anyone), compared to using xorg.conf.. It doesn't allow precise control at all, and for some reason (I'm sure it's the way I move my finger), seems to really jump up or down when I move side to side..
So does anyone have a config for this that works real good, that cares to share?
Thanks in advance.

I know this problem occurs when I compile the elantech driver in the PS2/trackpoint driver:
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
I was told you need the latest xf86-input-synaptics but Arch has the latest...
My workaround was to disable elantech:
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set

Cisco ISE configs for switch

I suppose Cisco ISE sends a URL redirect to the switch and the switch presents it to the client in case of guest Access getting a URL redirect with User Acceptance Page (Wired Guests and not wireless).
My question here is, Do we need to configure http and https server on the switches (both supplicant and authenticator)?
I am sure it will need but just wanted a confirmation..
I have checked the configuration for supplicant and Authenticator switches for ISE and it has no where mentioned that part of the config.
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_troubleshooting.html (a problem of URL redirection and possible cause is mentioned) ------- makes me sure that the config is needed.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/security/configuration_guide/b_sec_152ex_2960-x_cg/b_sec_152ex_2960-x_cg_chapter_010000.html
(config of supplicant and authenticator switch)---- nowhere mentioned of the http/https config for both switches.

Yes, its needed. The http/s server within the swtich is used to grab the http user traffic and redirect the traffic to the CWA portal, or a device registration portal, or even to the Mobile Device Management (MDM) onboarding portal. .
ip http server
ip http secure-server
The info below I grabbed from Cisco ISE for BYOD and secure unified access book.
"Many organization want to ensure that this redirection process using the switch's internal HTTP server is decoupled from the management of the switch itself, in order to limit the chances of an end user interacting with the management intervace and control plane of a switch. this may be accomplished by running the following two commands from global configuration mode:
ip http active-session-modules none
ip http secure-active-session-modules none"

Environment question for experts...

Is it possible to save an environment layer, for example a multichannel VI setup, to then import into another song?
Thanks...

You can't save an individual Environment layer (as "in a discreet Environment file"), but as the previous poster said, you can copy and paste Environment elements between two open songs (make sure "hide inactive songs" is unchecked in your prefs).
Note, however, that you can't copy/paste the layer itself; you can only copy/paste the objects in a layer between songs. If you want to create a similarly named layer in your target song, use the Create New Layer function in the Environment and then re-name it. Note also that you can't change the order in which the layers are listed in the Environment. So if you create a new layer, it will always appear as the bottom-most layer in the layer list. You can't move it inbetween existing layers or move it to the top.
On the flip side, you can import whole, individual layers from one song into another using the import functions available within the Environment (and the song from which the layer is imported does not have to be open). But depending on what you're trying to do you may end up with huge headaches. The import functions are not only a bit hard to understand, but they're buggy in some respects.
So post what you're trying to do exactly and I'm sure people will chime in as to whether you're better off copying/pasting or using the import layer function.

Environment config for Triton Rack

Similar Messages

Maybe you are looking for