Environment configuration for Hot Backups
Hi all,
1. I am trying to create a hot backup tool based on the read-only Environment strategy ([discussed in a previous thread|http://forums.oracle.com/forums/message.jspa?messageID=3674008#3674008] ).
Now, leaving aside the EnvironmentConfig.setReadOnly(true), I have found quite a few possible other configuration options in the EnvironmentParams class and I'm wondering if there are some that I should be using.
Here are a couple of examples:
- ENV_RECOVERY
- ENV_RUN_INCOMPRESSOR
- ENV_RUN_CHECKPOINTER
- ENV_RUN_CLEANER
Would it make sense to configure any of these?
2. After creating a hot backup I have tried to test its state. Basically, the approach was quite simple:
- open a read-only env on the backup
- try to access the databases in the env
My idea is that if the above 2 ops are succeeding then there is a very good chance that the backup is correct.
Now, while playing with the above configuration options I have noticed that if I'm setting ENV_RECOVERY to false in this test environment, then any attempt to access the databases within results in a DatabaseNotFoundException.
Can someone help me understand what is happening? (basically, I cannot make a connection between recovery and access to the DBs in the environment)
Many thanks in advance,
./alex
PS: I've forgot to mention that I'm running a quite old version: 2.1.30
Edited by: Alex Popescu on Aug 13, 2009 5:50 AM
ENV_RECOVERY - suppresses running recovery at Environment creation. Internal parameter.
ENV_RUN_INCOMPRESSOR, ENV_RUN_CHECKPOINTER, ENV_RUN_CLEANER - disable the INCompressor, Checkpointer, and Cleaner Daemon threads.
You should not need to adjust any of these parameters for your DbBackup utility. In fact, ENV_RECOVERY is an "internal use only" parameter.
PS: I've forgot to mention that I'm running a quite old version: 2.1.30
I'm sorry to be the bearer of bad news, but as my colleague Mark Hayes stressed in a previous post, you really need to upgrade from 2.1.30 to 3.3.latest. It is highly probable that you will eventually run into bugs with 2.x and we are unlikely to (1) be willing to diagnose them, and (2) fix them. As Mark pointed out, 2.1 is 3.5 years old and the product has had a lot of improvements in that time. We are happy to answer questions on this forum relating to the latest major release, but dealing with old and crusty code is certainly going to be well below our allowable priority level.
Charles Lamb
Similar Messages
-
Minimum privilege for hot backup
Hi,
Dears,
which privilege is required to take hot backup i want create user to take hotbackup with minimum privilege .now i take hotbackup with SYS user but this is danger because another department should be take hotbackup.
best regards
allahmoradAllahmorad wrote:
Hi,
Dears,
which privilege is required to take hot backup i want create user to take hotbackup with minimum privilege .now i take hotbackup with SYS user but this is danger because another department should be take hotbackup.
best regards
allahmoradalter database,alter system, create session is enough privileges to make vast changes in your database.So there is not such priveleges.(as fortmann suggested).
I will suggest you to use the rman for hot backup.
Hope this help :)
--neeraj -
Metalink Ids for hot backup clonning
Hi i want to perform hot backup clonning in R12 single node to single node and single node to multi node,
Please tell me the metalink idsHi,
Please see these docs.
Cloning Oracle Application 11i /R12 with Rapid Clone - Database (9i/10g/11g) Using Hot Backup on Open Database [ID 760772.1
Cloning E-Business Suite Using Hot Backup for Minimal Downtime of Source Environment. [ID 362473.1]
Rapid Clone Documentation Resources, Release 11i and 12 [ID 799735.1]
RMAN Guides
http://www.oracle.com/pls/db112/homepage
Thanks,
Hussein -
Hi guys,
I can't seem to search this scenario.
Can Azure be used as a Hot Backup? An on-prem server is backed up on the the Azure Cloud. When some disaster befalls the on prem server, can we switch to the cloud server?
Most document just discusses the backup and restore capabilities of Azure but not as hot backup capabilities.
Thanks,
JojoHi Jojo,
You can backup your op-promise server on Azure Cloud. Please refer to this page about how to configure it:
http://blogs.technet.com/b/systemcenter/archive/2014/05/08/using-and-monitoring-azure-backup-for-windows-server.aspx
But for Azure Backup how to work, I suggest you can post this issue on Azure back up forum for more details.
https://social.msdn.microsoft.com/forums/azure/en-US/home?forum=windowsazureonlinebackup
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Shell scripting for hot backup
Hi,
can you please give me shell scripting and it's explanation for taking hot backup. and which shell scripts are frequently use in real time.
thank a lot in advance.HAve you ever heard about RMAN ? Much better than reinvent the wheel.
http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/rcmquick.htm
Nicolas. -
Why archivelog mode is mandatory for hot backups.
Hi,
Why the database should be put in archivelog mode when we take hot backups. What happens actually. Why can't we put in noarchivelog mode and take hot backups?Suppose you are not using RMAN then you must put your tablespaces in backup mode. Otherwise the backup you can take will be unrecoverable.
In order to recover from a Hot Backup you have to do followings
- Restore your Hot Backup
- Recover the database - here, the archive log files are important
How does Oracle know what has to be recovered from archivelogs?It looks at the SCN.
If you never put your tablespaces in backup mode then SCN would not be frozen and Oracle wouldn't know what has to be recovered.
Talip Hakan Ozturk
http://taliphakanozturken.wordpress.com/ -
RMAN script for hot backup (looking for code critic) code attached.
Hello Guru's,
I have been having soem trouble running a successful hot full rman backup nightly.
We max our CPU load whenever our RMAN takes too long and conflicts with a Legato tape backup. I have a development server that I attempted to get a consistent backup time duration that is rock solid as to not conflict with the Legato backup time.
I just found out about duration with RMAN scripts here is my code:
#!/bin/bash
#rman backup script for daily hot whole database backup
at -f /hd1/rman_scripts/rman_backup 0600 tomorrow
rman target/
run {
allocate channel d1 device type disk format '/path/%U';
backup duration 1:00 partial minimize load database filesperset 1;
backup as BACKUPSET tag '%TAG' database;
backup as BACKUPSET tag '%TAG' archivelog all delete all input;
delete noprompt obsolete;
release channel d1;
exit
It completes the backup, but does not use the 1 hour allocated- it only uses 15 minutes on average and creates many files instead of normally three backup files.
Here is the results from querying the v$rman_status table for operation,status,start_time:
RMAN,FAILED, 17-OCT-06 0600
BACKUP,FAILED,17-OCT-06 0600
RMAN,FAILED,17-OCT-06 0606
BACKUP,COMPLETED,17-OCT-06 0606
BACKUP,COMPLETED,17-OCT-06 0606
BACKUP,FAILED,17-OCT-06 0615
RMAN,COMPLETED,17-OCT-06 1513
REPORT,COMPLETED,17-OCT-06 1513
DELETE,COMPLETED,17-OCT-06 1513
However, the timestamps of the backupset files it creates is:
06:15 and not 1513?????????????
RMAN appears to have only taken 15 minutes to create the files, why do I have a completed timestamp from v$rman_status of 1513???
Please advise and comment, I am just learning RMAN.Try to remove the DURATION option in your script.
Here more details about that part.
http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta009.htm#i1010261
Bye, Aron -
Step by Step RMAN configuration for full hot backup daily
Dear experts,
i am new to oracle RMAN , i have gone through couple of RMAN guides for configuration ,
i have oracle e-business suite (R12.1.1) and database is ( 11.1.0.7) on red hat enterprise linux 5.3 . All of this is 64 bit.
i have a database about 175 gb which is as usual growing day by day as data entry is taking place.
Untill now we have a cold backup strategy in the midnight 3 am a script down the database and make abc.tar.gz file of 25 gb approx. . This process takes about 100 minutes. But now due to new sales system we want our database up 24/7 .
So we want to configure RMAN hot backup.
I want to take backup on disk.
daily full hot backup.
backupsets
currently database is in no-archivelog
plz help me to proceed with this .
Edited by: user13376823 on Feb 10, 2011 12:17 PMuser13376823 wrote:
Dear all,
i am using this script for my full hot backup ,
run
allocate channel c1 device type disk format '/opt/R12Backups/rman/%U';
allocate channel c2 device type disk format '/opt/R12Backups/rman/%U';
crosscheck backup;
BACKUP DATABASE FORMAT '/opt/R12Backups/rman/proddb_%u_%p_%c';
sql 'alter system switch logfile';
BACKUP ARCHIVELOG ALL DELETE INPUT FORMAT '/opt/R12Backups/rman/archlog%U';
DELETE NOPROMPT OBSOLETE REDUNDANCY =1 device type disk;
DELETE NOPROMPT EXPIRED BACKUPSET OF DATABASE device type disk ;
BACKUP AS COPY CURRENT CONTROLFILE FORMAT '/opt/R12Backups/rman/copy_of_cf_%U';
BACKUP SPFILE FORMAT '/opt/R12Backups/rman/spfile_%U';
release channel c1;
release channel c2;
1.please tell me that it is covering all aspects of a backup . Can i do complete recovery with this backup in case of disaster?
Define "all aspects".
2. i only get database and controlfile backup at my location. There is no backup of archivelogs , What happened with
that ?Without seeing the output that rman generated from running the above block, and without seeing all of the persistent rman settings, it is impossible to diagnose anything. I will say that your script looks overly complex.
Just to give you a point of comparison, here's my setup. First the persistent rman settings. Take note of anything that is NOT marked as "default";
RMAN> show all;
using target database control file instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE 'SBT_TAPE' TO 3;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/ora00/app/oracle/product/10.2.0/db_1/dbs/snapcf_vlnxora1.f'; # defaultAnd here is my basic "full backup" script
[oracle@vmlnx01 bin]$ cat rman_full.scr
connect target /
show all;
run {
backup incremental level 0 database tag='bkup_vlnxora1_full';
backup archivelog all not backed up 2 times tag='bkup_vlnxora1_arch';
delete noprompt archivelog all backed up 2 times to device type disk;
list backup summary;
report obsolete;
quit -
How to Restore datas in Oracle 10g using hot backup?
I did Hot backup things (On-line backup) in Oracle 10g (Windows environment)
Now backup files are stored in physical location..
How to restore the datas to original location..
Can any one give the url or command for recovery in ora 10g for hot backup
ThanksPlease do not dump all of your work in this forum, and expect volunteers to do it for free!!!
Dear Great Senior DBA Sybrand Bakker
What are Oracle Discussion Forums?
Oracle Discussion Forums is an interactive community for sharing information, questions, and comments about Oracle products and related technologies. Most forums are moderated by product managers, and all of them are frequently visited by knowledgeable users from the community
oracle forums is not your place for showing “bossing” it is a place where junior to seniors share there knowledge and advices, it means helping and sharing….. Knowledge is for giving ….giving only it will increase… don’t discourage any one like this ……
There are my Great Seniors (not like u) mainly respected Mr. Jonathan Lewis, Mr. Don Burleson and a lot of oracle nominated ACE members are all giving patiently replay to jr. to sr.
Obeasley oracle doubts are mostly related to practical issue only……
Pls try to learn the word meaning of “volunteers” -
How to take a Hot backup of Oracle database
1: put the db in archive log mode
2: set the db_sid to correct one
3: login to sqlplus
4: verify the name of the db that you are connected to
select name from v$database;
5: check if the db is in archive log made
select log_mode from v$database;
if not in archive log mode
another command to check
archive log list;
6: find where on disk oracle writes archive log when it is in archive log mode
sql> show parameter log_archive_dest_1;
if the value is found to be 0, that means no values will be recorded, so we need to change it
sql> alter system set log_archive_dest_1='LOCATION=c:\database\oradata\finance\archived_logs\'
scope=spfile;
7: shutdown immediate; < this is done just to prepare the db for hot backups >
8: startup the db in mount mode
startup mount;
( 3 startup types : nomount - just starts the instance, mount - locates the control files and open up according to the values, open - finds the datafiles from the control files and opens up the db )
9: put the db in archive log mode
alter database archivelog;
10: open the database
alter database open;
11: check the status of the db
select log_mode from v$database;
SQL> archive log list;
12: create a directory for archived log
check if its empty, if empty we need to switch
sql> alter system archive log current;
run it 5 times < need to put / and enter > , then check the archive log dir , we will find files
13: make a table in the database and insert data in it
create table employees (fname varchar(2));
check the table
desc employees;
insert values
insert into employees values ('Mica');
14: tablespace must be in hot backup mode
check the status
select * from v$backup;
if found not active, then we need to change
we cannot put the db in hot backup mode, unless it is archive log mode
change to hot backup mode
alter database begin backup;
check the status
select * from v$backup;
15: now we can only COPY DBF FILES
copy *dbf <distination location>
16: need to take the db out to hot backup mode
alter database end backup;
17: need to make another archive log switch
alter system archive log current;
18: need to copy control files now, need to do a binary bckup
alter database backup controlfile to '<location>\controlbackup';
19: insert more values to the table
insert into employess values ('NASH')
COMMIT;
make another archive log switch : alter system archive log current;
do the same process for more values
20 : backup all the archive logs to a new location
21: shutdown the db and simulate a hw error, delete all the files from the database folder
22: try to start the sqlplus and db ::: error
23: copy all the backups to the db dir
need to copy the control files, rename the binary backup of the control file and make the copies as needed
24: try to mount the db, error < must use reset logs or noreset logs >
25: need to do a recovering of the database
shutdown
restore the archive logs
startup mount;
recover database until cancel using backup controlfile;
it will ask for a log file :
yes for recovery
cancel for cancelling recovery
26: check status: open the database in readonly
alter database open read only;
check the tables to see the data
shutdown immediate
shartup mount;
recover again : recover database until cancel using backup controlfile;
if oracle is asking for a log that do nto exist , all we have to do is type cancel
27: open the database
alter database open;
need to do reset logs
alter database open resetlogs;
28: check the db that you are connected, check the tables
thanks and regards
VKN
site admin
http://www.nitrofuture.comA very long list ... let me make it shorter.
SQL> archive log list;If I see this:
Database log mode No Archive ModeI put the database into archivelog mode and leave it there forever.
If it is in archivelog mode:
RMAN> TARGET SYS/<password>@<service_name> NOCATALOG
RMAN> BACKUP DATABASE PLUS ARCHIVELOG;Though there are a lot of things one could do better such as incrementals with block change tracking, creating an RMAN catalog, etc. -
Coherence with berkeley db environment configuration problem in weblogic
Hi
i am new to coherence and i developed a web application. in my app coherence is a cache and berkely db is a backend store. i configured the coherence-config.xml correctly as per the instructions in the oracle site.the problem is when i try to put my data in the cache i am getting an exception like this
java.lang.NoSuchMethodError: com/sleepycat/je/EnvironmentConfig.setAllowCreate(Z)V
at com.tangosol.io.bdb.DatabaseFactory$EnvironmentHolder.configure(DatabaseFactory.java:544)
at com.tangosol.io.bdb.DatabaseFactory$EnvironmentHolder.(DatabaseFactory.java:262)
at com.tangosol.io.bdb.DatabaseFactory.instantiateEnvironment(DatabaseFactory.java:157)
at com.tangosol.io.bdb.DatabaseFactory.(DatabaseFactory.java:59)
at com.tangosol.io.bdb.DatabaseFactoryManager.ensureFactory(DatabaseFactoryManager.java:74)
at com.tangosol.io.bdb.BerkeleyDBBinaryStoreManager.createBinaryStore(BerkeleyDBBinaryStoreManager.java:176)
at com.tangosol.net.DefaultConfigurableCacheFactory.instantiateExternalBackingMap(DefaultConfigurableCacheFactory.java:2620)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureBackingMap(DefaultConfigurableCacheFactory.java:1449)
at com.tangosol.net.DefaultConfigurableCacheFactory$Manager.instantiateBackingMap(DefaultConfigurableCacheFactory.java:3904)
at com.tangosol.coherence.component.util.CacheHandler.instantiateBackingMap(CacheHandler.CDB:7)
at com.tangosol.coherence.component.util.CacheHandler.setCacheName(CacheHandler.CDB:35)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ReplicatedCache.instantiateCacheHandler(ReplicatedCache.CDB:16)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ReplicatedCache.ensureCache(ReplicatedCache.CDB:152)
at com.tangosol.coherence.component.util.safeService.SafeCacheService.ensureCache$Router(SafeCacheService.CDB:1)
at com.tangosol.coherence.component.util.safeService.SafeCacheService.ensureCache(SafeCacheService.CDB:33)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:875)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:1223)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:290)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:735)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:712)
at com.coherence.cachestore.ReadFromFile.putValuesInCache(ReadFromFile.java:149)
at com.coherence.cachestore.ReadFromFile.doPost(ReadFromFile.java:78)
at com.coherence.cachestore.ReadFromFile.doGet(ReadFromFile.java:43)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3717)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
i google it but i got the answer for setting the environment in the java class(even this is also not succeed).i dont know how to do it for coherence. how coherence will take the berkely db configuration when i load the data in catch.please help me. if you know the answer please show the code how to configure the berkely db environment configuration for coherence and where i need to chanage/create and what should i have to do coherence will invoke the berkely db environment and store the data in the local disk. i am using coherence 3.6 with weblogic 10.3.5 server
Edited by: 875786 on Dec 2, 2011 4:37 AM
Edited by: 875786 on Dec 2, 2011 4:39 AMHi Thank you very much. Its works fine with je 3.3 version. I have several doubts.as per my application configuration its stores the data in local disk using berkely db. when i restart the server the cache data is no more but the stored data is available in the disk , is there any configuration or technique is available for pre load the data from disk to catch. (i am using replicated cache scheme).if yes menas please provide the full detail and sample code. thanks in advance.
-
Tablespace and datafile hot backup
Hi,
I wanted to if there is a command to copy a datafile using sqlplus command. I making a script that will backup the database while its online.I made a script for the alter tablespace begin backup but I wanted to know how to copy the datafiles without using the OS command,instead I wanted to use a sql commands. Is there any script or procedure to do this one.
thanks
Best Regards,
AntokRMAN is the best utility to do the backup and recover activities. It take care copy and paste itself. Bellow given script is also usefull for hot backup
spool hotbackup_PROD3.sql;
set feedback off;
set verify off;
set pagesize 2500
set linesize 132
set serveroutput on size 50000;
declare
cursor tablespace is select tablespace_name from dba_tablespaces where tablespace_name
in('RBS1',
'STORAGE',
'SYSADM_IDX2',
'SYSADM_IDX3',
'SYSADM_IDX4',
'SYSTEM');
cursor datafile(tsname varchar2 ) is select file_name from dba_data_files
where tablespace_name = tsname;
begin
dbms_output.put_line('spool hotbackup_PRODc.log;');
dbms_output.put_line('alter system switch logfile;');
dbms_output.put_line('select ''log''||sequence#,sysdate from v$log where status = ''CURRENT'';
for tsname in tablespace
loop
dbms_output.put_line('alter tablespace '||tsname.tablespace_name||' begin backup;');
dbms_output.put_line('prompt Starting Backup for '||tsname.tablespace_name||' Tablespace')
for dname in datafile(tsname.tablespace_name)
loop
dbms_output.put_line('prompt Copying File '||dname.file_name||'.....');
dbms_output.put_line('!cp '||dname.file_name||' /backup2/hotbak'||dname.file_name);
end loop;
dbms_output.put_line('alter tablespace '||tsname.tablespace_name||' end backup;');
dbms_output.put_line('prompt Finished backing up '||tsname.tablespace_name||' Tablespace')
dbms_output.put_line('alter system switch logfile;');
end loop;
dbms_output.put_line('spool off;');
dbms_output.put_line('!mailx -s "KL_PROD521_HOTBACKUP1" [email protected] < /prod1/HOTBKUP/hotbackup_PRODc.log');
dbms_output.put_line('exit');
end;
spool off;
@hotbackup_PROD3.sql
exit; -
Hello,
1) I want to activate archiving on R12.1.2.how can i do this on single or multinode.please tell how can i restore backup after archiving.what is precautions after activating archive or RMAN.
2) If i have taken completed cold backup of apps and db.after some day i want to take backup.there is necessary to take backup both(apps,db,inst) if i take only db backup..is this possible to restore the backup next time.
Regards,Hi;
For hot backup u should use rman utulity,check backup
7 RMAN Backup Concepts
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmcncpt.htm
For other question check below
Backup and recovery startegy for EBS
Re: Backup System
backup polincy-ebs
Backup Policy for EBS can
Regard
Helios -
Which is better for User Managed Hot backup - running in cron or oracle scheduler
We are taking hot backup in our environment by using sql script of just begin backup, host copy and end backup
Can we use this script to be put in cron for weekly two times or to use oracle scheduler .
Which is better option and why?The answer to your question depens on your condition. Do you have more experienced Unix admin or DBA?
From my point of view cron is better becuase all you need is SQL*Plus utility and shell script:
export ORACLE_SID=...
sqlplus <username>/<password> as sysdba <<EOF
ALTER TABLESPACE .. BEGIN BACKUP;
host copy ..
ALTER TABLESPACE .. END BACKUP;
EXIT
EOF -
Alert mail configuration for backup / Oracle database
Hello All,
I am trying to configure alert mail for successful backup in the system and i have did with most of the configurations. The steps are as follows:
Configured mail in 000 client and also assigned mail id for a user
Configured the method CCMS_OnAlert_Email_V2 (set the parameters and its auto reaction method)
Configured the nodes CCMS Monitor templates -> Database -> Oracle -> Backup / restore -> backup status -> last brbackup run and last successful complete backup with the method CCMS_OnAlert_Email_V2 as mentioned in the SAP note 176492
And after these configurations we receive the mail successfuly. However there are few issues which i would like to get corrected / clarified. Whenever a backup is started i am receiving a mail stating that brbackup has been started and whenever a backup fails i am receving mail stating brbackup is failed with some return code. But i am not receiving any mail after successful completion of backup. Am i missing any configuraions here? Is this the standard one and other configurations required for mail on successful backup? Please suggest
Regards,
AnandhWhen should a message trigger an alert?
1.Always (at every message): The Alert Monitor triggers a alert with the corresponding message value for every message.
2.Message value (color) has changed: The Alert Monitor only triggers an alert if the alert color of a reported message changes. For example, an alert is triggered if a red message follows a yellow message.
3.The message sent has changed: The Alert Monitor only triggers an alert if the color or severity of a message changes or if a new message is sent.
4.Never: The Alert Monitor does not trigger any alerts.
As your requirement, I would suggest it to be set to "Always"
Please let us know how it works.
Regards
Puneeth
Maybe you are looking for
-
Issue with interest free period
So I am looking in the ad today and see you have the 18 months on purchase of 429 or more. Then on the website itself it still shows the 12 month no interest on purchase of 399 or more. I cant even choose store pickup if I wanted because the website
-
Can any one tell me the logic for finding the common cendors I have 5 plants Now I should display the total no. of vendors in each plant & the common vendors in all the plants & shouls display this in the graph
-
How do I change the pdf version when combining files
I am using Acrobat 9 Standard and need to change the default pdf version when combining multiple files, it actually save in 1.6 but would need to lower to 1.4 to be compatible with a client. So far, I changed the .joboptions with no luck. Any idea? T
-
Downpayment process (AP)
Hi, I'd like to know the difference between partial and full downpayment. Is the process the same? Thanks a lot!
-
Mass change of the Original System
Hello Experts!!! We need to do a massive change of the original system to avoid repair tasks. I know that thru SE03 or SM30->TADIR is possible, but we need to do it to all objects in the system.... I think It might exist a standar tool for that... wh