Environment ghost issues

I am trying to mix a track with my own custom environment and i keep encountering a problem where audio will believe it is on a different track. Hard to explain so i'll break it down. Say there were two audio tracks - audio track 1 bass and audio track 2 guitar, when i play the track only one is heard. This is not due to a solo or mute i have not noticed. Its like the channels are paired or they are the same but different. I am soo lost, someone please shed some light.

They have a newer version coming out in a few months from symantec but had said to contact lenovo considering depending on bios version it would work fine. The initial bios release works great but every release since that version must have a flaw in the firmware or something for legacy was removed from it. I'm trying to get a solution for our client since they don't want to change from symantec and will work with our rep tomorrow.

Similar Messages

MacBook Pro with retina display having a ghosting issues

Hi folks,
Just bought the all new MacBook Pro with Retina display and using it for some few weeks experienced ghosting issues.. Almost have of my retina display screen is having the ghosting issues.. Whats really wrong??

You aren't the only one... See this nearly 500 page thread... https://discussions.apple.com/thread/4034848?start=0&tstart=0.
Clinton

Do new Retina Macbook Pro's still have ghosting issues.

If I buy a 13.3 inch Macbook Pro Retina today will it have a ghosting issue, or has it been resolved?

These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily. No one here works for Apple nor does Apple get involved in responding.
The only way we would know if Apple has "fixes" is if they have publicly announced it on their website and Knowledge Base articles.

Purchased Samsung 63 plasma 8000 series ghosting issues

I purchased a 63 Samsung 3D plasma 8000 series in 2/10 and the picture is fantastic, but I seem to be having ghosting issues when people move on the screen or with fast moving scenes. I had a pioneer 50 plasma that was 5 years old that did not have this problem with people only blurring with fast moving scenes like sports. The people and scenes are clear it's just the edges seem to be blurring or ghosting. Is this normal or is there something I can adjust? It is really irritating to me. I thought this TV was supposed to be an improvement with blurring or ghosting but at present it seems to be worse. Please advise.
Solved!
Go to Solution.

cd22 wrote:
what was it's original function.
Motion Judder or Blur Reduction (named differently depending on brands of TV) is used to help compensate for the natural blur some content has. Unless you are watching something in its default recording such as 24p you will have at least some motion blur. Once again this is blur that is in the content not something plasmas technically have like LCD's are susceptible to.
So what does it do or supposed to do:
A standard video signal is actually a series of still images, flashed on screen so quickly that we believe we are watching a moving image. The typical frame rate used in North America is 60 frames per second (60Hz) meaning that a TV would display 60 individual still images every second. Sub-field drive is the method used to flash the individual image elements (dots) on a plasma panel. For each frame displayed on the TV the Sub-field drive flashes the dots 10 times or more, meaning that the dots are flashing 600 times per second (600Hz) or more. (Example: 60 frames per second x 10 sub-fields = 600 flashes per second). TV's will try to compensate content judder by inserting more sub-fields into the image. However it tends to have mixed results. Sometimes it works sometimes it completely fails and sometimes it overcompensates.
I personally have a Panasonic plasma and I keep the blur reduction off.

System PATH environment variable issue when user log off and log in or switch from admin to non-admin account

Hi,
Problem Description:
After installing my new product version, when user does log-off and log in again into admin account
or switch from admin account to non-admin account, PATH environment variable shows incorrect path of my product (previous product version’s path) using command prompt.
It seems windows refresh issue during session changes (log off and log in / switch from Admin to
Non-admin account).
Why PATH environment variable is not refresh immediately after log off and log in again or Switch
from admin to non-admin mode?.
Please see my thread for more details http://social.msdn.microsoft.com/Forums/vstudio/en-US/445ab42c-bdff-405a-8d53-558e1b6c7d34/path-environment-variable-issue-when-user-logoff-and-login-or-switch-from-admin-to-nonadmin?forum=windowsgeneraldevelopmentissues
Also submitted bug for this in connect.microsoft.com portal.In that it has lots of information
like problem statement, Reproduction steps and Expected Results.
Bug ID: 871782
Could you please any body help me for this?. your support will be appreciated.
Thanks,
Marichamy

Why PATH environment variable is not refresh immediately after log off and log in again or Switch
from admin to non-admin mode?.
I wouldn't have any expectation of what you are doing to work the way you expect. E.g. why is the %ABC% being replaced at all? There is some help about this ambiguous scenario in the cmd help...
/V:ON Enable delayed environment variable expansion using ! as the
delimiter. For example, /V:ON would allow !var! to expand the
variable var at execution time. The var syntax expands variables
at input time, which is quite a different thing when inside of a FOR
loop.
/V:OFF Disable delayed environment expansion.
So, what's the setting for the /V: switch that your users would be using? Perhaps you should be using the ! instead of the % for your ABC variable?
Oh. There's more below where I found that...
Delayed environment variable expansion is NOT enabled by default. You
can enable or disable delayed environment variable expansion for a
particular invocation of CMD.EXE with the /V:ON or /V:OFF switch. You
can enable or disable delayed expansion for all invocations of CMD.EXE on a
machine and/or user logon session by setting either or both of the
following REG_DWORD values in the registry using REGEDIT.EXE:
HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\DelayedExpansion
and/or
HKEY_CURRENT_USER\Software\Microsoft\Command Processor\DelayedExpansion
to either 0x1 or 0x0. The user specific setting takes precedence over
the machine setting. The command line switches take precedence over the
registry settings.
In a batch file the SETLOCAL ENABLEDELAYEDEXPANSION or DISABLEDELAYEDEXPANSION
arguments takes precedence over the /V:ON or /V:OFF switch. See SETLOCAL /?
for details.
If delayed environment variable expansion is enabled, then the exclamation
character can be used to substitute the value of an environment variable
at execution time.
So, I guess the essence of your "bug" will boil down to whether you
need the feature to get the result you want and the
truth of that first sentence but it certainly looks like a "can of worms" to me. ; )
HTH
Robert Aldwinckle

HT5455 Is It normal that my premium category 15" retina MBPs screen has ghosting issues, then I get declined from screen replacement?

Is It normal that my premium category 15" retina MBPs screen has ghosting issues, and I get declined from screen replacement?
I have purchased this hardware in Budapest for approximately 3000 usd. I was a bit shocked to see screen ghosting after a few days of use. The problem was getting worse but because I am a design consultant working mainly on my Mac I couldnt take a week off to leave It at an Apple service station.
Last week I was surprised to receive the information from the local Apple repair shop in Germany that my retina MBP that I bought 13 months ago was declined from screen replacement by Apple.
Considering the price of the product I find It unacceptable that I need to work on a defective product and see shadows every time I leave an Illustrator or InDesign window open for a short period of time.
Is there any way to resolve this issue? I wouldnt like to pay another 800 dollars just to replace a component on my defective Apple product.

Contact Apple Support directly. In Germany the Expresslane or this number
0800 6645 451 will allow you to speak directly to someone from Apple. Explain your situation. Mind you, AppleCare and issues with Apple products like this have to occur without any user accidents or user installed parts to ensure that Apple will cover you. If there was a user accident or installed part, you may be turned down. If you have the original Apple parts, and did the installation yourself, replace it with the original parts very carefully following the directions on http://www.ifixit.com/ unless you can afford an authorized service provider to do it for you. Since we don't speak for Apple here, being end users like yourself, that's why I say "may", as I've seen Apple handle these things on a case by case basis. So hopefully you don't have any obvious damage that looks like it is user caused. Good luck!

Low Memory Environment Render Issues...

Howdy folks,
     I've been working on a 13 minute promotional video for a non-profit summer camp. It is made up of mostly still images with some ken burns effects, a narration track, a music track, some titles, and some logo overlays.
     I am doing this on a 3.2 Ghz P4 with only 1.5G ram under XP sp3. I realize this is not an ideal PPro box.
     Windows XP is configured to use 2 drives for VM paging (3Gigs each). All drives have over 100gigs of free space on them.
     Now until recently I've only had a couple of small issues which I suspected were related to trying to do this in a low memory environment. In one case a flash render would die at the same point every time (error was something along the lines of "did not return a valid frame"), and simply scaling down the still image clip at that point in the sequence so that it was closer to the project size took care of it. That method also helped in a few cases where some images would not render at all, and just appeared as black screens in the final video (the render process did not fail, but the end result was missing clips).
     Then there was one case it seemed to fail at random points. A simple reboot took care of that, and it exported just fine.
     But now, however..... Now it's back to failing at random points (sometimes it gets 3500 frames in... sometimes as far as 13400... or anywhere in between) and additionally, by viewing the incomplete flash video file with VLC (which I need to do in order to find out where it failed because PPro never tells me) I find that some of the images are black screens, as before.
     The problem now, is that it's never the same point of failure, and it's never the same images blacked out. And rebooting and or killing off extra processes does not help.
     Now this was rendering fine last week. Here's the kicker - I haven't changed much of anything since then. The project is still the same length, with just about the same number of cuts, tracks, and assets used. The only things I've done since then are:
     1) I duplicated the sequence so that I can make some changes unique to the web-version of the video, and still save the old sequence to go back to. The old sequence has remained untouched and I haven't even looked at it since then.
     2) Created 2 new titles and inserted them in place of some old ones in the new sequence which weren't appropriate for the web version of the video (only the text is different in these new titles... they are the same style, size, etc. as the old ones they replaced)
     3) I shortened some empty time/space/pauses between sections of the sequence.
     So those are all minor changes... but I can't shake the rendering issue no matter how many times I restart or scale down an image that was blacked out or appears at one of the random points of outright failure (again, with the "did not return a valid frame" issue).
     I did notice that after I duplicated the original sequence, the project takes much longer to open. Does having another sequence present in the asset bin use that much more resources? Even if the clips in that 2nd sequence use the same assets as another? I'm tempted to remove the original sequence and see what happens, but I don't want to lose it and have to un-edit the web version whenever I want to go back and re-render the DVD version.
     So basically I'm looking for anything that might cause the small changes I made to be giving me so much grief now.
     Any input is appreciated. Thanks.

You may have a corrupt project. Try creating a new project and importing the old one into it.
If you still experience problems then carefully do each of these troubleshooting tips. One or more of them is likely to help.
Cheers
Eddie

Application Runtime Environment installation issue

Hi,
JDeveloper 11.1.1.3.0
OS: Solaris SPARC
I am trying to install the application runtime environment and I am getting the below error. Please advice me on how to resolve this issue.
JAVA Version in Solaris SPARC :
weblogic@comm1 ~/Installs $ java -version
java version "1.5.0_24"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_24-b02)
Java HotSpot(TM) Server VM (build 1.5.0_24-b02, mixed mode)
Error:
weblogic@comm1 ~/Installs $ cd Disk112/
weblogic@comm1 ~/Installs/Disk112 $ cd Disk1/
weblogic@comm1 ~/Installs/Disk112/Disk1 $ ./runInstaller
./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
./runInstaller: syntax error at line 299: `count1=$' unexpected
Thanks,
Rajesh

Hi,
I have installed the jdk 64bit version and tried the application runtime environment installation but I am still getting the same old error. Here it is..
weblogic@dwlsalescomm1-c2 ~/Installs/Disk112/Disk1 $ ./runInstaller -jreLoc /apps/wls/WL10/jdk1.6.0_21/
./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
./runInstaller: syntax error at line 299: `count1=$' unexpected
JDK Version:
WL10/jdk1.6.0_21/bin $ ./java -d64 -version
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b06)
Java HotSpot(TM) 64-Bit Server VM (build 17.0-b16, mixed mode)
Please advice me on how to resolve this installation issue.
Thanks,
Rajesh
Edited by: Rajesh on Mar 15, 2011 8:28 AM

SAPUI5 Development Environment Installation Issues

Hi
I am new to this development environment and am experiencing problems installing the Eclipse environment, the way I understand it once I have installed Eclipse I need to install UI5 Team and UI5 Tools packages, I did manage to install the UI5 tools with out to many issues but the UI5 Team will not install and appears to be missing certain components that I have not been able to find. The message I get is below;
Cannot complete the install because one or more required items could not be found.
Software being installed: SAPUI5 ABAP Repository Team Provider 1.6.5 (com.sap.ide.ui5.team.feature.external.feature.group 1.6.5)
Missing requirement: SAPUI5 ABAP Repository Team Provider 1.6.5 (com.sap.ide.ui5.team.feature.external.feature.group 1.6.5) requires 'com.sap.adt.fwk.ci.feature.group 0.20.1' but it could not be found.
Could somebody point me in the direction where I can find a step by step detailed install for Eclipse and all components needed.
Thanks

please have a look at this document
How to install a basic development environment for SAPUI5
or
follow Installation process for SAP UI5 Tools from
SAPUI5 Tools - User Interface Add-On for SAP NetWeaver - SAP Library

I have an HP Laserjet 2430tn Experiencing Ghosting issues

I'm experiencing ghosting when ever i print from our above mentioned printer. I have tried blowing nad cleaning it out, all with no success. the ghosting is taking place about 1/2 way down the page from the original and where it should be. Any and all ideas would be greatly appreciated.
I'm wondering if it may need the maintenance kit for the device. The printer has around 60,000 prints through it, not sure if this will help.

Hi @DWD2444594 , I see by your post that you are no longer able to scan as a PDF after updating to Windows 7.
I can help you.
I checked the drivers online for Windows 7.
They are HP LaserJet Hostbased Print/Scan Plug and Play Drivers. No additional software.
The Plug and Play Bundle provides EZInstall to assist with installation for direct USB connections and offers basic print and scan for all-in-one and multifunction devices.
The Windows scanning software doesn't have the feature for PDF scans.
You would have to use a Third Party Software for scanning by PDF.
I would just go to www.google.com and search for free scanning software for PDF in Windows 7.
There should be a lot of different ones available.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can I ask apple store to replace my MBP with Retina display? because I have the ghosting issue with it!

I bought my MBP with Retina display less than two months ago and now I have this problem which the ghost of the application that was open, remains on the background.
I took the device to apple store and they decide to change a harware of it!! now I just feel like it is no going to be repaired.
just wanna know despite that 14 days of purchase date has passed, can I ask apple to replace the whole device and give me a new one or not!

you can ask them, but they are not obligated to fulfill your request. They are obligated to fix any issues related to defective craftsmanship as long as your mac is under warranty however.

(GS70 2QE GTX 970M) MSI True Color Ghosting Issue

Hi everyone,
I just found out about MSI True Color and decided to give it a go on my GS70 2QE. After some tweaking, the results are simply outstanding. I ususally work with 2 other IPS monitors, and now the GS70's monitor color is pretty close to them.
Unfortunately there are 2 issues that are bugging me alot:
1) When dragging windows or scrolling on chrome, there is a clear redish ghosting effect. It's visible just by moving the mouse pointer from side to side.
2) When the laptop boots up, it takes a few seconds to trigger my profile on MSI True Color, but just moments after that, it changes the color of the screen again. I have to manually go to the icon, and change the profile again in order for it to stick.
Has anyone else tried the MSI True Color on their laptop? Anyone with similar issues or with a solution for these problems?

Quote from: badboy2k on Today at 00:28:59have a look in recording devices and see if Sterio Mix is enabled if it is Disable it! (stereo mix treats your desktop sound that's being sent to your ears as a recording d...

X131E 3372-3FU Ghost Issues with 2.09 bios or higher

I contacted Lenovo tech support with an issue that our client had since bios revision 2.09 through the latest 2.52. They are unable to use Symantec ghost to image their laptops using the latest solution suite 2.5. I was onsite today to investigate the issue and found with putting everything in legacy mode I still was unable to boot to anything dos based it would just hang. The laptops that have the previous bios version 1.05 work fine, but unfortunately there was no way to downgrade lower then 2.09 once 2.09 was on the systems. Just seeing if there is a way to force a downgrade to 1.05 or if Lenovo is coming out with a fix so that this functionality is restored since the earlier 1.05 bios did not exhibit this issue.

They have a newer version coming out in a few months from symantec but had said to contact lenovo considering depending on bios version it would work fine. The initial bios release works great but every release since that version must have a flaw in the firmware or something for legacy was removed from it. I'm trying to get a solution for our client since they don't want to change from symantec and will work with our rep tomorrow.

Sql query extremely slow in the new linux environment , memory issues?

We just migrated to a new dev environment in Linux REDHAT5, and now the query is very slow, and I used the TOAD to run the query, it took like 700 msecond to finish, however from any server connection, the sql query takes hours to finish.
I checked toad monitor, it said need to increase db_buffer_cache and shared pool too small.
Also three red alert from toad is:
1. Library Cache get hit ratio: Dynamic or unsharable sql
2. Chained fetch ratio: PCT free too low for a table
3. parse to execute ratio: HIgh parse to execute ratio.
App team said it ran real quick in the old AIX system, however I ran it in old system, and monitored in the toad, it gave me all same 5 red alerts in old system, and it did provide query results a lot quicker though.
Here is the parameters in the old system (11gr1 on AIX):
SQL> show parameter target
NAME TYPE VALUE
archive_lag_target integer 0
db_flashback_retention_target integer 1440
fast_start_io_target integer 0
fast_start_mttr_target integer 0
memory_max_target big integer 0
memory_target big integer 0
pga_aggregate_target big integer 278928K
sga_target big integer 0
SQL> show parameter shared
NAME TYPE VALUE
hi_shared_memory_address integer 0
max_shared_servers integer
shared_memory_address integer 0
shared_pool_reserved_size big integer 31876710
shared_pool_size big integer 608M
shared_server_sessions integer
shared_servers integer 0
SQL> show parameter db_buffer
SQL> show parameter buffer
NAME TYPE VALUE
buffer_pool_keep string
buffer_pool_recycle string
db_block_buffers integer 0
log_buffer integer 2048000
use_indirect_data_buffers boolean FALSE
SQL>
In new 11gr2 Linux REDHAT parameter:
NAME TYPE VALUE
archive_lag_target integer 0
db_flashback_retention_target integer 1440
fast_start_io_target integer 0
fast_start_mttr_target integer 0
memory_max_target big integer 2512M
memory_target big integer 2512M
parallel_servers_target integer 192
pga_aggregate_target big integer 0
sga_target big integer 1648M
SQL> show parameter shared
NAME TYPE VALUE
hi_shared_memory_address integer 0
max_shared_servers integer
shared_memory_address integer 0
shared_pool_reserved_size big integer 28M
shared_pool_size big integer 0
shared_server_sessions integer
shared_servers integer 1
SQL> show parameter buffer
NAME TYPE VALUE
buffer_pool_keep string
buffer_pool_recycle string
db_block_buffers integer 0
log_buffer integer 18857984
use_indirect_data_buffers boolean FALSE
SQL>
Please help. Thanks in advance.

Duplicate question. Originally posted in sql query slow in new redhat enviornment
Please post in just one forum.

OSB Proxy Service deployed in cluster environment FTP issue

Hi,
I have a OSB 11g proxy service based on a FTP JCA adapter. Here are the JCA settings:
<connection-factory location="JNDI_FILE_TOKEN" UIincludeWildcard="FILENAME_TOKEN"/>
<endpoint-activation portType="Get_ptt" operation="Get">
    <activation-spec className="oracle.tip.adapter.ftp.inbound.FTPActivationSpec">
      <property name="DeleteFile" value="true"/>
      <property name="MinimumAge" value="0"/>
      <property name="PhysicalDirectory" value="FOLDER_TOKEN"/>
      <property name="Recursive" value="false"/>
      <property name="PollingFrequency" value="30"/>
      <property name="FileType" value="ascii"/>
      <property name="IncludeFiles" value="FILENAME_TOKEN"/>
    </activation-spec>
</endpoint-activation>
When I deploy this proxy in a cluster (having 2 osb nodes) and place the very first file on FTP server. Both nodes pick the file simultaneously. But after this when I place files on FTP server only one node is picking file. Could you kindly tell where is the issue ?
Thanks and Regards

Hi Mani,
Do check the configuration of ProxyService-2 that it is enabled or not.
Do check the input payload of it, that ProxyService-1 is passing the correct payload to ProxyService-2.
Redeploy the ProxyService-2
There is some issue in your proxyService-2.
Regards,
Richa

Environment ghost issues

Similar Messages

Maybe you are looking for