Environment Variables don't work after migrating zcm policy

Hi There...
I hope anyone can help me with this.
After migrating my zcm policies to active directory I found my Environment Variables set in my login script do not work anymore.
My guess is that somehow the Environment Variables in the login script are in a different cmd environment then the zcm bundles. but I'm still in the dark what migrating the policies to a different environment has to do with this... and how to solve it.
The policies didn't change, just the environment from where they are loaded...
I build a workaround by adding the set commands within launch command of the bundle, but I would rather keep them in my login script instead of builing 3 or 4 icons of the same application but with different set Environment Variables.
If anyone has a good idea... let me know plz!!
TIA
Rey

ZCM does not detect changes in environment variables until a reboot.
It's possible the variables were being set earlier in the logon process
which proceeded ZCM fully initializing.
Consider using something such as SETX.exe or SETENV.exe which can set
them permanently. There will still be a one logon delay until they are
seen.
On 12/17/2010 6:06 AM, rsedoc wrote:
>
> Hi There...
>
> I hope anyone can help me with this.
>
> After migrating my zcm policies to active directory I found my
> Environment Variables set in my login script do not work anymore.
>
> My guess is that somehow the Environment Variables in the login script
> are in a different cmd environment then the zcm bundles. but I'm still
> in the dark what migrating the policies to a different environment has
> to do with this... and how to solve it.
>
> The policies didn't change, just the environment from where they are
> loaded...
>
> I build a workaround by adding the set commands within launch command
> of the bundle, but I would rather keep them in my login script instead
> of builing 3 or 4 icons of the same application but with different set
> Environment Variables.
>
> If anyone has a good idea... let me know plz!!
> TIA
>
> Rey
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Similar Messages

  • My CS products don't work after migrating them from an old mac to a new mac. Any ideas?

    Help! I bought a new imac, and used the migration process to move everything from the old mac to the new mac. But now none of my CS products (eg Indesign) will work. I use CS5.5 and CS6. The CS6 says I can run "a trial version" - which is absurd, given that I have a legitimately bought version on disk (that cost over £1000!). The CS5.5. icon just bounces for a couple of times then closes before fully opening.
    Adobe will not help, because they say CS6 is "an old product".
    I am desperate - does anyone have any ideas?

    Migration does not work with Adobe products. There are too many components in too many places, and they don't get copied properly.
    You'll need to use the Adobe Cleaner Tool to remove what you copied:
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    Then download a fresh copy of CS6:
    Other downloads

  • Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)

    Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)  --not able to use the Beats Speakers. Any software updates I need to install?
    This question was solved.
    View Solution.

    Hi Jim,
    You're welcome
    Is the version of Windows 7 Ultimate you have installed 32bit or 64bit?
    Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers - do you see an existing entry for the IDT High Definition Audio CODEC listed here?
    There is an alternative IDT Audio driver you may wish to try on the following link.
    http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53281.exe
    Let me know if you get the same error with this version.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Buit in ethernet don't work after installing Lion

    Built in ethernet don't work after installing OSX 10.7 on my MacBookPro 2.4 Ghz Intel Core 15.
    Someone else has the same problem?
    On my MacPro 2 x 2.6 GHz Dual-Core Intel Xeon it's not working good, i have to do a restart to get internet connection.
    Is there somebody who has te same problem and has a solution?

    Something does look odd to me unless it's a typo in your post.
    This look like what I'd expect from the NetGear Router - not form the modem. That is when You browse the router stats (http:/192.168.1.1)
    I work with a modem with te folowing preverences:
    Wan IP address    87.211.205.210
    Lan IP address     192.168.1.1
    Primery DNS server       62.58.50.5
    Secondary DNS server   62.58.50.6
    and a separate router Netgear WGT624v3
    This is not exactly what I would expect from System Preferences/Network
    the system preferences for the network are
    Configure       by DHCP
    IP address     192.168.1.15
    Subnetmask  255.255.255.0
    Router           192.168.5.1  <<<<<<<<<<< this should be 192.168.1.1??????
    DNS              208.67.222.222
                         208.67.220.220
    The Router address in System Preferences/Network should be the same as the LAN IP Address. In this case it's on a different network.
    If this is not a type then this is a problem!
    Not sure how it got to be that way.
    Does it persist when resetting the modemand router?/
    Steve

  • IPhone 3GS apps don't work after 4.3 upgrade

    Some apps like mail, safari, app store, ipod don't work after upgrading to iOS 4.3. itues is up to date and have never had issues before. tried to downgrade to 4.2 but was unable to. Help!

    I have the same issue, half the apps no longer work, just stays in 'updating' mode. I've tried uninstalling some but now the app store is freezing. THe ones I am able to reinstall give me error message saying I'm not logging in correctly (I am). I'm guessing some apps versions aren't compatible with the new software but a few I was able to use after the software update and now I can't

  • All Mac apps don't work after cloning on new hd.

    All Mac apps don't work after cloning on new hd.
    I used CCC to clone 10.6.8 then onto new drive. Everything works BUT all Mac apps.
    Error: You can't open the app(s) because it is not supported on this type of Mac. (On MacBook 2011)
    Thanks for your help.

    All good. Just drag and dropped each application and they worked until I did a restart. Then repaired permissions and everything works.

  • My apps don't work after synching music files from my PC

    My apps don't work after synching music files from my PC through Itunes....though all the apps are shown in the Apps window in Itunes (The Apps match the iTunes account on the iPhone).....
    Disconnecting after the sync and After downloading any app from Appstore through Wi-Fi all my apps start working.....
    Please Help.....

    What happend is your phone forgot it was authorized to work with items associated with your apple id. If it happens again, download any free app to prompt the sign in, once you install the free app the others should work.

  • Card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej

    card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej.
    Tried downloading this driver:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75456-1&cc=il&dlc=he&lc=he&...
    still dont work.

    Hi,
    Download and install the Chipset driver on the link below.
    ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45041.exe
    After the installation has completed, restart the notebook.
    Next, download and install the Card Reader driver on the following link.
    ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45046.exe
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My ipod shuffle (4th gen) don't works after hard reset with itunes

    My ipod shuffle (4th gen) don't works after hard reset with itunes, it don't reads too like USB by Windows.
    Before that i've seen error (-50) in iTunes, so i reset ipod.
    I've read all tips on this site, but nothing helps me.

    No, USB works good. I've tried reset on my friend's PC, and it saw my ipod and reset was done. But when i tried to load music, it wrote me, that i've installed incorrect software.

  • PL/SQL don't work after install Oracle 9204 patch set

    I'm using Oracle 9.2.0.1.
    some pl/sql don't work after i install database patch set 3 (9.2.0.4).
    code--------------------------------
    BEGIN
    dbms_aqadm.stop_queue(
    queue_name => 'WB_RT_SERVICE_QUEUE');
    exception
    when others
    then
    null;
    END;
    error message is: ora-03113 end-of-files on communication channel.
    please help. thank you !!

    Can you please tell me the soluation of this problem as I am also facing the similar problem ?
    Thanks in advacne ?
    Regards
    Satpal

  • Webmail in Safari don't work after updating to iOS6.

    Webmail in Safari don't work after updating to iOS6.  Logging on to office webmail account are redirected.  Webmail works with Google Chrome, but it doesn't sove the issue with Safari.  Any suggestions on how to configure Safari?

    Try this
    I was having this problem, seem to happen when waking computer, once finally connected network works great. 
    You need to edit your network preferences to order the network selection list.  Goto this support page  Using network locations (Mac OS X v10.6 and later) and edit your selection list. 
    I also created a "HOME" location and deleted all networks except wifi.  Put MB to sleep woke and safari worked great.  Still I re-ordered the networks under Automatic putting wifi at top, sequence is from top down.  Don't forget to click Apply.  Have fun

  • Has anyone got Push mail to work after migration t...

    Has anybody sucessfully got Push mail working after migration from BT Yahoo mail to the new BT Mail server?
    I'm still on the old BT Yahoo mail server and Push mail works fine on my iPhone
    But people have told me that once migrated to the new BT Mail server, Push mail isn't available
    BT tell me that it is, but there's a couple postings on the web saying Push mail won't work
    So, my question is, is there somebody out there who who has been migrated to the new BT Mail server and who can confirm they can still get their @btinternet.com address post-migration to work as Push mail on their iPhone or ipad devices?

    There is no push mail on BTMail. Once you have been migrated to BTMail you will need to have your devices fetch emails. There is apparently no plans to change this.

  • "Find Form" calendar is not working after migration

    Hi,
    We have migrated from Oracle 9i to 10g.we have one form ''FormA" and "find form" for that FormA.Calendar functionality is present in both FormA and "Find FormA".if we try to use calendar functionality in "Find formA",its giving error like FRM-40104 - No such block calendar,FRM-40105(unable to resolve reference to item claendar.cell1.........),FRM-41045 (cannot find item - invalid id).Actually this scenario is not working after migrating the FORMS application to 'OAS10.1.2' from 'OAS904' .
    In 'OAS904' ,The calendar item is present in the 'FormA' form, the 'calendar.show' hides the "Find FormA" and appears in the FOrmA and uses FormA's calendar item and after selecting the date,the date s applied to the "Find FormA"
    But after migration, the "Find FormA" is not hiding, so its not able to retrieve the calendar properties.Because the calendar is present in "FormA".
    Any problem with pll files like 'qmslib65','qmsolb65',qmsevh65'??
    please help me by providing suggestions.
    Thanks

    qmslib65','qmsolb65',qmsevh65Are these libraries self-written or from some third-party tool?

  • The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

    PROVA

    Yes, I know that, but I ever work with the right mouse button,
    because selecting groups and subgroups with double click make some confusion for me.
    Regards,
    Fabio
    ufficio tecnico
    grafica e prestampa
    Via Verdi, 11 - 43058 Sorbolo (PR)
    Tel. 0521.694111 - Fax 0521.694360
    E-mail: [email protected] <mailto:[email protected]>
    E-mail: [email protected] <mailto:[email protected]>
    Web: www.litoexpress.it <http://www.litoexpress.it/>
    Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
    The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
    created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
    You can double click on the selected object to get into the multilevel isolation mode.
    Regards,
    Satinder
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

  • Could someone explain to me why Flash virtual tours don't work after update to Flash Player 10.1?

    Hello there,
    Could someone explain to me why Flash virtual tours don't work after update to Flash Player 10.1?
    Thanks!

    www.privium.nl
    klick the icon image 'virtual tour' upper right corner.
    This works on my other pc, on which I did not update to 10.1 ...
    (I produced this virtual tour; it is stored on the FTP server of the service provider I use for this)
    Awaiting your reply,
    Regards,

Maybe you are looking for

  • CS5.5 InDesign is unresponsive when opened

    I have Adobe CS5.5 Creative Suite, and all the programs work fine except for InDesign since the first time I tried opening the program. InDesign starts up and opens to a new page, but then suddenly freezes and is unresponsive and have to force quit.

  • How do I open attachments in emails I have received?

    How do I open attachments in emails I receive to view them before I send them on to friends?

  • Questions on ROS -7

    Hi all, is it possible for a Supplier to upload file during the self registration phase and / or during the questionnaires compilation? Thanks! Nuz

  • Fundamental  Question -Users

    How Do I create Users on the SOlman & the authorizations ;(PFCG direct on SOLMAN??) BTW I have no clue of  SolMan -Just got my hands on it today ! Thanks

  • Can i Read an Object[Hashtable] if i am using BufferReader

    Hi EveryOne, I am writing a Java Chat Program, an it seams that i can not read an Object[Hashtable] from the BufferReader, Do you thing there is an easy way around it. rather then me change ther BufferReader everywhere. Please let me know.... Thanks