Environmental Health and Safety (EHS-Module)
Hi Experts,
Can any one suggests Books for Environmental Health and Safety (EHS-Module)
KC,
You did answer your own question here. Yes, you probably have to build out your health and safety solution. You would have to look at the individual technical requirements for each IDES instance to understand what might be possible.
Regards,
Bob
Similar Messages
-
EHS-ENVIRONMENTAL HEALTH AND SAFETY
PLEASE GIVE INFORMATION WHICH REQUIRES FOR AN ABAPER REGARDING TO EHS -MODULE.
Hi
See the links
http://www.sap.com/solutions/business-suite/plm/featuresfunctions/ehs.epx
sub modules
SAP EH&S Product safety & Dangerous Goods
SAP EH&S Waste Management
SAP EH&S Industrial Hygiene
SAP EH&S Hazardous Substances Management
SAP EH&S Incident Management
SAP EH&S Occupational Health & safety
SAP EH&S Emissions Management
SAP EH&S Recipe Management
SAP CRM/QM Audit Management
Regards
Anji -
Manager says he needs an SAP Environmental, Health, and Safety Person
What are the buzz words for this module?
It is completely new to me and I don't know where to begin
annakHi Anna,
SAP EH&S consists basically of 5 different modules:
- Product Safety
- Hazardous Substance Management
- Dangerous Goods Management
- Waste Management
- Occupational Health & Industrial Hygiene and Safety
A good starting point should be the SAP Online Documentation: <a href="http://help.sap.com/saphelp_47x200/helpdata/en/a5/3adda043be11d188fe0000e8322f96/frameset.htm">http://help.sap.com/saphelp_47x200/helpdata/en/a5/3adda043be11d188fe0000e8322f96/frameset.htm</a>
All modules are using a specification database where you can store data based on classes and characteristics in SAP's class system as well as compositions, identifier, material assignments, usages, ...
Based on the data you can do calculations with rulesets. For example based on a certain environmental regulation that tells you: <i>if your product contains xx% of this substance you have to label it as toxic</i>. Then you can generate Material Safety Data Sheets for your products or other relevant documents (depending on the module) and ship them to your customers.
Hope it helps,
Andreas -
Hi
Do SAP have or do a Health and Safety or Safety Managment Module or functionality?
ThanksHi
In SAP, there is EHS ( Environment, Health & Safety) module.
please check this link for details:
http://help.sap.com/saphelp_47x200/helpdata/en/a5/3add5a43be11d188fe0000e8322f96/content.htm
regards
Srinivas -
MacBook Pro Health and safety issue: Potential Burn during normal use
Hi,
I am not a complainer. I worked for Apple of 6+ years and have had a top of the line Apple Notebook since Apple created the concept of the laptop notebook.
I recently experienced a 3rd degree burn using my MacBook Pro that I think Apple needs to warn folks about:
MacBook Pro 17"
Machine Model: MacBookPro1,2
CPU Type: Intel Core Duo
Number Of Cores: 2
CPU Speed: 2.16 GHz
L2 Cache (shared): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP12.0061.B00
Serial Number: ()
SMC Version: 1.5f10
Sudden Motion Sensor:
State: Enabled
I had my laptop on my lap. I was wearing shorts. It noticed that it was warm on my leg where the left side of the MacBook Pro was touching my leg, but it didn't create a reflex pain response.
Upon completing my session, when I closed the machine and put it away, I noticed a 1 inch x .75 inch blister on my leg where it had been touching the MacBook/Pro; and it has turn out to be a significant burn.
I checked all the documentaiton that came with my MacBook Pro and there was no warning about the potential of this situation.
I recommend that Apple let owners know, perhaps through an email or a popup when they visit the Apple site. Lastly, when I encountered this issue, I wasn't running any high performance, compute bound applications. It was email. So, I have to believe that it is possible to detect wait states within the processes running and take the processors to a low power mode of operation when they are not performing actual work. Am I out in left field here?
I want Apple to be successful. I haven't heard of a similar complaint on any of the high performance PC's at work. Beyond a Health and Safety issue, this is also a reputation issue. Better to face into the storm and honestly deal with this issue.
A slightly crisp, but loyal, MacBook Pro user.
Mike Doherty
MacBook Pro Mac OS X (10.4.5) Potential Health and Safety Issue- 3rd degreee burn potential under normal useMike... I do sympathize with your situation but let me correct you:
I recently experienced a 3rd degree burn using my
MacBook Pro
Do you know what a 3rd degree burn is? A 3rd degree burn involves the dermis, and is full thickness involving the subcutaneous tissues and fat underneath your skin layers. This is something that usually happens when man meets fire, electrocution, and chemical burns. A 3rd degree burn is not typically achieved by a simple transfer of energy by conduction, unless extreme heat for an extended period of time.
I had my laptop on my lap. I was wearing shorts. It
noticed that it was warm on my leg where the left
side of the MacBook Pro was touching my leg, but it
didn't create a reflex pain response.
Reflex pain response? Don't try to make up medical terminology. You didn't feel it much like you don't feel the sun when you get a sunburn initially... your skin slowly adjusted to the temperature, and at some point the heat increased over the threshold of which causes damage. You should have gone to the doctor if you were overly concerned.
Upon completing my session, when I closed the machine
and put it away, I noticed a 1 inch x .75 inch
blister on my leg where it had been touching the
MacBook/Pro; and it has turn out to be a significant
burn.
You're right, if you have a 1inch by almost 1 inch heat related blister on your leg, it is bad, nothing that I would consider significant. That is less then 1% of your body, probably about 0.25% to 0.5%, and only a 2nd degree burn. Your most significant complication would be a local skin infection.
I checked all the documentaiton that came with my
MacBook Pro and there was no warning about the
potential of this situation.
Actually... I'd hate to call you a liar, but I'm pretty sure that it does warn about burns.
To confirm this, apple has also information online:
http://docs.info.apple.com/article.html?artnum=30612
I recommend that Apple let owners know, perhaps
through an email or a popup when they visit the Apple
site.
They do... link above.
Lastly, when I encountered this issue, I wasn't
running any high performance, compute bound
applications. It was email. So, I have to believe
that it is possible to detect wait states within the
processes running and take the processors to a low
power mode of operation when they are not performing
actual work. Am I out in left field here?
No, you're definitely not. Here's where I start to agree with you. For the computer to heat up that much, when not doing things like rendering video is abnormal, and you deserve to have apple check out your computer. I think you should contact them on this concern.
I want Apple to be successful. I haven't heard of a
similar complaint on any of the high performance PC's
at work. Beyond a Health and Safety issue, this is
also a reputation issue. Better to face into the
storm and honestly deal with this issue.
It's harder for other manufacturers... our computers are aluminum, designed to disperse the heat. Technically they are considered "portables" not laptops, but I don't get into that argument because I disagree with the word "portable"... it's meant to work on your lap, and if you can't comfortably using regular apps, you deserve an answer.
A slightly crisp, but loyal, MacBook Pro user.
Hey, at least you're taking it with some humor. It's a shame you had to get hurt as a result of your computer. If I were you I would have gone to your Primary Care Physician, documented the burn, and returned your computer for a new one, and for something say, a free iPod for your pain.
Sorry you got hurt, I think you should have your heat issue professionally investigated through apple care -
Report related to Health and Safety in SAP
Dear All,
Can you please help me from where i can found the reports related to Health and Safety Reports like
1. No. of Near-Miss Incidents
2. No. of First Aid Cases
3. N. of Medical Cases
4. No. of Lost time Incident
5. No. of Fatal Injuries
6. No. of fire Incident major, Minor
7. No. of Fire drill conducted
8. No. of people trained
9. Man-Hours worked at project
10. No. of PIT drill conducted
11. No. of Trip Drill Conducted
Also help me should i develop these reports or can be found in standard , we are using ECC 6.0
Regards
VivekHello Vivek,
The standard reports for the Incident / Accident Managment are:
S_SH8_84000003 - Display 1000-Employee Quota
S_SH8_84000004 - Display 1,000,000-Hour Quota
S_SH8_84000005 - List Reportable Accidents Without Accident Report
S_SH8_84000006 - Check and Correct Absences in Incident/Accident Log
You can find some of the reprots from you list to be available here.
Otherwise you may require to develop reports.
Request you to go through the topic: Incident/Accident Management Reports in SAP Help. You will find more information about Incident / Accident reports there.
Regards,
Niraj -
Hi,
I have EHS appearing in one of our systems and we dont have it in our another system. Is there any seperate installation for EHS? Please help me in the issue. And my systems are all ECC 6.0.
Thanks $ Regards,
Mirza Kaleemulla Baig.Hi Zubair,
May be you can go thro the following links
http://help.sap.com/saphelp_ehs27b/helpdata/en/a5/3add4643be11d188fe0000e8322f96/frameset.htm
http://help.sap.com/saphelp_ehs27b/helpdata/en/a5/596d36f74c7505e10000009b38f839/frameset.htm
http://fuller.mit.edu/ehs/relationship_cofig.ppt
http://www.rnd.in/tt/sap/sol/fn/ehs/cs/cs.html
Hope the following links, help
Regards,
Raj -
Documentation ofBusiness Package for EH&S ( Environment Health and Safety)
Hi,
I am not being able to located documentation for the the business package for EH&S. Anybody who can help?
642775 note suppposed to contain information about all business packages, but when I search for this note, I get "An SAP note with the number requested could not be found." error message. Gurus, any ideas?Hi Bhatt,
You didn't specify a certain version. I found 50.1. here is the link: https://www2.iviewstudio.com/support_content/_15391/BPEHSEN.pdf
Here is the link to the on-line help for the same package:
http://kwhelp.sap.com/SAPIKS/Sc6752ca5b5be4b43abe578c1d5242102/KW/IWB_STRUCT232293F37DA5934EB2B2C00EF01E265E/IWB_EXTHLPB7E4486739E5B447852E8B1299D6D9C9/?LANGUAGE=EN&RELEASE=50_2003_Q4&IWB_INDUSTRY=EP_CONTENT&IWB_COUNTRY=&TMP_IWB_TASK=DISPLAY
Hope this helps.
John -
EHS module documentation?
Hi all,
I am SAP-MM functional consultant and I will be working with the EHS module in a short time.
Have you got any ducumentation with the main transactions that are used in this module?
Thanks and regards,Hi you can refer this links
1. [sap.ittoolbox.com/.../sap-ehs-environment-health-and-safety-module-anywhere-training-is-available-1193550 - 61k]
2. [web.mit.edu/is/blt/breakfasts/02-16-2005/EHS_Update.pdf ]
3. [www.dowcorning.com/content/publishedlit/90-1014.pdf ]
4. [http://203.200.213.166/inside/eh_s.pdf]
Below mentioned are latest and i think will work for you.
[http://oep.berkeley.edu/campus_disaster_response/documents/EHSAnnex.pdf]
[http://sbp.sefton.gov.uk/PDF/EHS.pdf]
Regards,
Shyamal -
Error assigned the Data and Safety Hygiene
Hi guys
Currently I have a problem with the module IHS (occupational health and safety) of SAP EH & S. When I choose the work area assigned to the Data and Safety Hygiene is showing the following error:
Internal program error; (SAPLCBIH_LB15_DIALOG SAPLCBIH_WA00 ERROR_C1AX_CLDLG_OPEN 0)
Message no. C$153
Diagnosis
Internal system error
Procedure
Notify your system administrator.
Error data
SAPLCBIH_LB15_DIALOG
SAPLCBIH_WA00
ERROR_C1AX_CLDLG_OPEN
0
I tried to solve the problem, doing the following activities:
1. I upgrade the component EA-APPL up to its last version, as suggested by the note 1375848 "EH & S classes and Characteristics".
2. I applied the note number 1146700 - "Transferring the standard database structureu201D, I applied the first method "IMG activity "Adopt Standard Specification Database Structure." But the error persist.
Please I need your valuable help to solve this problem.
Thanks,
María GarcíAnswered by the posts
-
Want to create new Status types in the CBIH82 T.code EHS module
Dear Expert,
Client wants that status type like YES and NO in the filed Status in the t.code "CBIH82 -Edit Work area"
I have try to create in the spro path under the status management but unable see that status.
Path is SPRO --->Environment ,Health and Safety ---->INS ---->Basic settings--->Status Management
So any body guide me how to create the new Status for this T.code or We can't create new status in the system.
Thanks
UrvashiPlease uncomment this:
ORDER_ITEM_INX-target_qty = 'X'.
You can check the 2nd example in this link for your reference.
http://sap4.com/wiki/index.php?title=BAPI_SALESORDER_CHANGE
Regards,
Naimesh Patel -
I want to know about ehs module and flow
hi,
This is kishore. I have been assigned to ehs module. i want to know about that how it helps industries and flow of the module.
K. Kishorehi kishore
Please go thru this link
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/EHSSAF/CAGTFADM-EHS.pdf
reward points if it is helpful.
Regards
Alfred -
EHS - Industrial hygiene and safety
Hi,
Can anyone brief more on EHS-IHS-IMG settings for following (measurement project,risk assessment and safety measure link via work area IMG settings )
Thanks & best regards
Guruprasad..Hi
Here is some information about EH&S along with the img stuff
http://help.sap.com/saphelp_ehs27b/helpdata/en/8a/3b6e361b2fac0be10000009b38f839/frameset.htm
Hope it helps.
If helpful please award with points
Cheers
Badri -
Hi experts,
There is any standart extractor in the EHS(Environment help and safety) module of R/3?
ThanksThere are extractors 0EHS_IH_WA_1, 0EHS_IH_IA_1, 0EHS_IH_IA_2
Chk this link..
http://help.sap.com/saphelp_nw70/helpdata/EN/02/0809407448c442e10000000a1550b0/frameset.htm -
EHS Module - Workflow triggering
Dear All,
For EHS Module,when i post the document in WAE01 Transaction the workflow should trigger
Could you please tell,how to trigger the workflow
Could you please which method should we use for triggering with details
Its very urgent
Thanks and Regards,
M.SabarinathPlease don't use the word urgent in your thread as it is against the forum guidelines.
Turn on the event trace and check if an event is raised when executing the transaction. If not check to see if you could use a change document or find an appropriate Badi, user-exit or enhancement point.
Regards,
Martin
Maybe you are looking for
-
Supp Open Interface Import concurent program submit from Pl/Sql not Working
Hi, I am new to Financials and using R12.1. We are integrating the Supplier Master from the Operations system from a different platform. The records are inserted into the interface tables and subsequently we need to trigger the concurrent programs fr
-
Can't get the Submit button to work on Acrobat X
I was having this problem on Acrobat 9 and so I bit the bullet and upgraded, hoping the problem would go away, but it did not. I have a simple form for an event which recipients will fill out and submit, emailing the entirePDF to others (not to me) I
-
How to pass the value from sub report to sub report
how i want get one value from sub report to sub report.. can i do this one... how can get the value. i know main report to sub report i tried that way but value is 0.00 is comming Any reasons.
-
What are the differences between application server and webserver
pls give the differences between application server and web server with examples
-
Upgrading Video Card in the iMac
I've been very confused by what I have read on so many discussion groups. Is the video card in the 2.8 Mhz, duo core, Intel based iMac upgradeable? I know there is a standard plug in card, MXM, but am not sure if the 2400 ATI card I have in the iMac