Environments: Anyone experienced with setting them up for Midi?

Hi everyone/anyone,
I looking for someone that's comfortable with the Logic Express Environments. I've been reading the manual and playing around with the layers, but still can't figure out how it all really works. This seems to be the place in the program that I need to understand so I can set up my external midi gear to work together with what Logic already has.
So I'll appreciate anyone that's got a better idea than me of how to use the environments piece of the program.
Thanks
Algae592002

The Samsung is a nice unit, I have looked at getting it for a while now. But, I have a Hitachi 51S500, with DVI input, so if I decide to got that route, I'll try it first. The Samsung also has DVI input, so, it's merely a matter of getting the right DVI cable and running from your card to the set. The problem you will run into though, is getting the timings set right for your card. You will also have to work with it a lot to get the overscan right. Check out AVS forum, under the HTPC section, lots of good info there.

Similar Messages

Can anyone help with setting up AirPrint on my iPhone 4

Can anyone help with setting up AirPrint on my iPhone 4. Printer is ready.

you have a compatable printer correct? http://support.apple.com/kb/ht4356
if you do may i introduce you to a hassel free app for your mac called printopia i use it also very easy to set up and use
http://www.udeo.com/mac/printopia/
hope thats helped
Goody

Anyone familiar with "The Standby Wizard for Oracle "

Is anyone familiar with "The Standby Wizard for Oracle " by Relational Database Consultants, Inc?
It is a GUI app that supposedly simplifies and automates the creation, maintenance, and switchback functions necessary to implement Oracle's standby database paradigm for high-availability.
I have a very small IT shop and simplification with data protection is important to me.
I'd like to read anyones thoughts if you have such.

Hi
I never used this tool. However it is important that you have the right infrastructure, too. A standby database wrong implemented is useless. You can try to call a consult in near you to implement the dataguard.
Does Relational Database Consultants has a documentation about the product?
Bye, Aron

Anyone experienced with scaling flash projectors to large resolutions?

I have interesting project that I'm hoping won't become a nightmare. I'm building a kiosk for a client that will have a rather simple Flash application running it. The catch is that it is spread across 4 widescreen monitors.
I'm planning to have the 4 monitors as a spanned desktop so it appears to Windows as one large desktop, not 4 separate monitors. This way when the flash movie is set to full screen it will stretch across all 4 screens and not just one.
My first thought is can a Flash movie even have a resolution that big? The answer is no, they are limited to a stage size of roughly 4000pixels. OK, no problem, I'll just build it at half resolution and just let it scale up when it goes fullscreen.
Now my current worry is just how well will it run with a potential screen resolution of 5760x900 or 6720x1050? The application is pretty simple, an animated character walking across the screen and waving, a couple of objects animated in the background, maybe some confetti or firework particles as a celebration when they get to the other end of the screen. Other than that, no real complicated processing going on. It seems like it shouldn't be a problem, but I'm still nervous about how smooth it will run at that huge of a resolution.
I've got a Dual Core 3 Ghz processor, 2 Gigs of RAM, and 2 GeForce 9500 GT 512MB video cards to run the kiosk... pretty beefy machine to run nothing but a simple Flash application right?
So, any opionions or insight from anyone who may have put together any sort of project dealing with large resolution displays like this?
Thanks in advance,
Jaysin

Automated volume adjustment isn't an absolute thing. I've found that iVolume works OK, but is by no means completely accurate and can't always truly balance the levels. I've found to be better than trying to adjust hundreds of tracks manually, but some tracks still are louder or softer than others.
Just a couple of notes:
- iVolume can't adjust copy-protected tracks. These will be flagged in the windows as it goes.
- Make sure the pulldown menu for "Adjustment" is set to "Adjust Automatically" and "Albums" to "Adjust Each Song Separately"
and in the iVolume Preferences set it to reset manual adjustments and that the Start button is set as appropriate for your needs. I just leave it on "all tracks".
Regards.

I have purchased 100 iPads for my school. We need to set them up for classrooms. I am not sure of the protocol. flrobinson

I have purchaed 100 iPads for my students. I need to know how to set them all up for muitiple users with apps.

Hi fkr2.0,
Welcome to the world of iPad deployments! There are a few things I recommend you do before you get started:
First I would watch the iOS Deployment Model Videos on the left side of this page:
http://www.apple.com/education/resources/information-technology.html
Then I recommend you read through these two guides:
iOS 6 Education Deployment Guide
http://images.apple.com/education/docs/ios_6_education_deployment_guide.pdf
Apple Configurator Help Guide
http://help.apple.com/configurator/mac/1.0/
This will give you a solid foundation for managing iPads with Apple Configurator. Once you read through these guides you will likely have more specific questions that you can post to these forums.
Hope this answers your question!! Good luck with your iPad deployment.
~Joe

Issues with setting appropriate ownership for file system

Hi All,
We are using ACFS File system. For some of the mount point we have set to change ownership according to requirement in rc.local file So that all permissions remain intact when the server restarts. But the permissions are not taking into account. Only after the rc.local is executed ASM disks are mounted I guess. Is there any where else can we write scripts to change ownership of mount points for ACFS so that when the disks are mounted proper Unix permissions are setup.
Thanks & Regards,
Vikas Krishna

To configure raw devices if you are using Red Hat Enterprise Linux 4.0:
To confirm that raw devices are enabled, enter the following command:
# chkconfig --list
Scan the output for raw devices. If you do not find raw devices, then use the following command to enable the raw device service:
# chkconfig --level 345 rawdevices on
After you confirm that the raw devices service is running, you should change the default ownership of raw devices. When you restart a Red Hat Enterprise Linux 4.0 system, ownership and permissions on raw devices revert by default to the root user. If you are using raw devices with this operating system for your Oracle Clusterware files, then you need to override this default.
To ensure correct ownership of these devices when the operating system is restarted, create a new file in the /etc/udev/permissions.d directory, called oracle.permissions, and enter the raw device permissions information. Using the example device names discussed in step 5 of the previous section, the following is an example of the contents of /etc/udev/permissions.d/oracle.permissions:
# OCR
raw/raw[12]:root:oinstall:0640
# Voting Disks
raw/raw[3-5]:oracle:oinstall:0640
# ASM
raw/raw[67]:oracle:dba:0660
After creating the oracle.permissions file, the permissions on the raw devices are set automatically the next time the system is restarted. To set permissions to take effect immediately, without restarting the system, use the chown and chmod commands:
chown root:oinstall /dev/raw/raw[12]
chmod 640 /dev/raw/raw[12]
chown oracle:oinstall /dev/raw/raw[3-5]
chmod 640 /dev/raw/raw[3-5]
chown oracle:dba /dev/raw/raw[67]
chmod 660 /dev/raw/raw[67]
http://download.oracle.com/docs/cd/B19306_01/rac.102/b28759/preparing.htm#CHDGEEDC
Edited by: Babu Baskar on Apr 18, 2010 1:33 PM

Could anyone help me with setting up classpath for an application in OC4J

I am using OAS 10.1.2 OC4J embedded.
I have lotsof.properties files in some directory external to OAS.
Right now, since we had problems, I moved the properties files into the OC4JHOME/applib directory. It works.
I would like to keep it in the external directory itself. Can we set up some environment variable (CLASSPATH or library) in some deployment or orion descriptors to point to this external directory.
I am using ResourceBundle.getResource("yyy.properties") in the code.
Thank you

One possible solution (I think):
In the file OC4J_HOME/config/application.xml, we added the following line.
<library path="directory"/>
This directory is not EAR or WAR context relative. It can anywhere be in the local system.
Thanks

Slow calc time with SET CREATEBLOCKONEQ OFF for block creation

Hello everyone,
I have a problem with the slow execution of one of my calc scripts:
A simplified version of my calc script to calculate 6 accounts looks like this:
SET UPDATECALC OFF;
SET FRMLBOTTOMUP ON;
SET CREATEBLOCKONEQ ON;
SET CREATENONMISSINGBLK ON;
FIX (
FY12,
"Forecast",
"Final",
@LEVMBRS("Cost Centre",0),
@LEVMBRS("Products",0),
@LEVMBRS("Entities",0)
SET CREATEBLOCKONEQ OFF;
"10000";"20000";"30000";"40000";"50000";"60000";
SET CREATEBLOCKONEQ ON;
ENDFIX
The member formula for each of the accounts is realtively complex. One of the changes recently implemented for the FIX was openin up the cost center dimension. Since then the calculation runs much slower (>1h). If I change the setting to SET CREATEBLOCKONEQ ON, the calculation is very fast (1 min). However, no blocks are created. I am looking for a way to create the required blocks, calculate the member formulas but to decrease calc time. Does anybody have any idea what to improve?
Thanks for your input
p.s. DataStorage in the member properties for the above accounts is Never Share

MattRollings wrote:
If the formula is too complex it tends not to aggregate properly, especially when using ratios in calculations. Using stored members with member formulas I have found is much faster, efficient, and less prone to agg issues - especially in Workforce type apps.We were experiencing that exact problem, hence stored members^^^So why not break it up into steps? Step 1, force the calculation of the lower level member formulas, whatever they are. Make sure that that works. Then take the upper level members (whatever they are) and make them dynamic. There's nothing that says that you must make them all stored. I try, wherever possible, to make as much dynamic as possible. As I wrote, sometimes I can't for calc order reasons, but as soon as I get past that I let the "free" dense dynamic calcs happen wherever I can. Yes, the number of blocks touched is the same (maybe), but it is still worth a shot.
Also, you mentioned in your original post that the introduction of the FIX slowed things down. That seems counter-intuitive from a block count perspective. Does your FIX really select all level zero members in all dimensions?
Last thought on this somewhat overactive thread (you are getting a lot of advice, who knows, maybe some of it is good ;) ) -- have you tried flipping the member calcs on their heads, i.e., take what is an Accounts calc and make it a Forecast calc with cross-dims to match? You would have different, but maybe more managable block creation issues at that point.
Regards,
Cameron Lackpour

Java.util.logging - Problem with setting different Levels for each Handler

Hello all,
I am having issues setting up the java.util.logging system to use multiple handlers.
I will paste the relevant code below, but basically I have 3 Handlers. One is a custom handler that opens a JOptionPane dialog with the specified error, the others are ConsoleHandler and FileHandler. I want Console and File to display ALL levels, and I want the custom handler to only display SEVERE levels.
As it is now, all log levels are being displayed in the JOptionPane, and the Console is displaying duplicates.
Here is the code that sets up the logger:
logger = Logger.getLogger("lib.srr.applet");
// I have tried both with and without the following statement
logger.setLevel(Level.ALL);
// Log to file for all levels FINER and up
FileHandler fh = new FileHandler("mylog.log");
fh.setFormatter(new SimpleFormatter());
fh.setLevel(Level.FINER);
// Log to console for all levels FINER and up
ConsoleHandler ch = new ConsoleHandler();
ch.setLevel(Level.FINER);
// Log SEVERE levels to the User, through a JOptionPane message dialog
SRRUserAlertHandler uah = new SRRUserAlertHandler();
uah.setLevel(Level.SEVERE);
uah.setFormatter(new SRRUserAlertFormatter());
// Add handlers
logger.addHandler(fh);
logger.addHandler(ch);
logger.addHandler(uah);
logger.info(fh.getLevel().toString() + " -- " + ch.getLevel().toString() + " -- " + uah.getLevel().toString());
logger.info("Logger Initialized.");Both of those logger.info() calls displays to the SRRUserAlertHandler, despite the level being set to SEVERE.
The getLevel calls displays the proper levels: "FINER -- FINER -- SEVERE"
When I start up the applet, I get the following in the console:
Apr 28, 2009 12:01:34 PM lib.srr.applet.SRR initLogger
INFO: FINER -- FINER -- SEVERE
Apr 28, 2009 12:01:34 PM lib.srr.applet.SRR initLogger
INFO: FINER -- FINER -- SEVERE
Apr 28, 2009 12:01:40 PM lib.srr.applet.SRR initLogger
INFO: Logger Initialized.
Apr 28, 2009 12:01:40 PM lib.srr.applet.SRR initLogger
INFO: Logger Initialized.
Apr 28, 2009 12:01:41 PM lib.srr.applet.SRR init
INFO: Preparing Helper Files.
Apr 28, 2009 12:01:41 PM lib.srr.applet.SRR init
INFO: Preparing Helper Files.
Apr 28, 2009 12:01:42 PM lib.srr.applet.SRR init
INFO: Getting PC Name.
Apr 28, 2009 12:01:42 PM lib.srr.applet.SRR init
INFO: Getting PC Name.
Apr 28, 2009 12:01:42 PM lib.srr.applet.SRR init
INFO: Finished Initialization.
Apr 28, 2009 12:01:42 PM lib.srr.applet.SRR init
INFO: Finished Initialization.Notice they all display twice. Each of those are also being displayed to the user through the JOptionPane dialogs.
Any ideas how I can properly set this up to send ONLY SEVERE to the user, and FINER and up to the File/Console?
Thanks!
Edit:
Just in case, here is the code for my SRRUserAlertHandler:
public class SRRUserAlertHandler extends Handler {
     public void close() throws SecurityException {
     public void flush() {
     public void publish(LogRecord arg0) {
          JOptionPane.showMessageDialog(null, arg0.getMessage());
}Edited by: compbry15 on Apr 28, 2009 9:44 AM

For now I have fixed the issue of setLevel not working by making a Filter class:
public class SRRUserAlertFilter implements Filter {
     public boolean isLoggable(LogRecord arg0) {
          if (arg0.getLevel().intValue() >= Level.WARNING.intValue()) {
               System.err.println(arg0.getLevel().intValue() + " -- " + Level.WARNING.intValue());
               return true;
          return false;
}My new SRRUserAlertHandler goes like this now:
public class SRRUserAlertHandler extends Handler {
     public void close() throws SecurityException {
     public void flush() {
     public void publish(LogRecord arg0) {
          Filter theFilter = this.getFilter();
          if (theFilter.isLoggable(arg0))
               JOptionPane.showMessageDialog(null, arg0.getMessage());
}This is ugly as sin .. but I cannot be required to change an external config file when this is going in an applet.
After much searching around, this logging api is quite annoying at times. I have seen numerous other people run into problems with it not logging specific levels, or logging too many levels, etc. A developer should be able to complete configure the system without having to modify external config files.
Does anyone else have another solution?

Anyone experienced with replacing the hard drive by an SSD- drive in a MacBook Pro?

Is anyone of you experienced in replacing the hard disk of a MacBoorkPro by an SSD-drive?
I am considering the Crucial drive of 1TB and have read almost anything I could get on the issue of cloning without reinstalling al that stuff I have running. Seems like Crucial has a general solution to that which should also work for Apple. Or should I use Time Machine itself?
Thanks for replying. I need to tell you all that almost any comment is useful. Already have I found so many suggestions by people all around this world which have been useful, and I cannot even thank the person in person...

Hi Eustace, thanks for your interest & reply
Seems like we did the exact same things, basicallly and it works fine here. I enclosed the original HDD and put it away on some dark & cool spot, just in case of any future trouble - after all it contains a complet & running system.
I took out the optical drive (which had got stuck anyway) put in two Samsung Pro's 840 512 Gig each, and installed another pair of these externally enclosed as back up drives (USB, the first CCC-cloning operation took many hours).
System is superfast now and no more moving things in there besides the fans. But nothing gets hot anymore either and with all that complete silence... I love it!

Matrix - Help with setting 1st column for line numbers

Hi,
I have created a matrix on a custom form and would like to add line numbers to the # column line that of the quotation screen.
The matrix itself is populated correct from the Query and LoadFromDataSource, and all the fields and columns are filled in correctly, the only column I am having trouble with is the 1st one for line numbers. My code for adding the line numbers is
SBO_Application.MessageBox("Matrix Count: " & tMatrix.RowCount)
For i = 1 To tMatrix.RowCount
      oEditText = tColumns.Item("#").Cells.Item(i).Specific
      oEditText.Value = i
Next
For the example I am using I get the message box appear:
Matrix Count: 26
So I know I should have the line number go from 1 to 26, however I only get 1 to 9 displayed, all the remaining lines are blank.
Any ideas on why it stops at 9 or what I should do to correctly set the line numbers in the Number column like that of the system Quotation/Sales orders forms.
Your help is much appreciated
Matthew

Hi,
I tried changing it to the following as you suggested:
SBO_Application.MessageBox("Matrix Count: " & tMatrix.VisualRowCount)
For i = 1 To tMatrix.VisualRowCount
    oEditText = tColumns.Item("#").Cells.Item(i).Specific
    oEditText.Value = i
Next
The message box still displays 26, however my lines still only go up to number 9.
Thanks for the quick response.

Anyone Familiar with Mobile TV Elite for iPad

The only info I seem to be able to find online are sales pitches.
My hubby just downloaded it to watch the NASCAR race today and is having issues finding the correct channel. Everything I can find says it should be on there, but he can't seem to get it to work.
Any help?

The Pioneer 9G Elite series is still considered to be the best TV in the industry. Look at all the reviews across the web, and the Elite is the tops. The Panasonic G10 comes close as does the Sony XBR8.
One of the reasons that Pioneer left the plasma business was that the average consumer wasn't willing to spend upwards of $4,500 for a 50" set and the costs associated to manufacture each panel were too high to justify Pioneer from continuing their plasma line. The Elite line obviously catered to the niche ultra high-end video and audiophile and custom installer.
Whether Panasonic will incorporate the "Kuro" technology time will tell. Pioneer will continue to support their products so purchasing one shouldn't scare you.
I snagged the 50" Elite from BB last week and going to have it professionally ISF calibrated. I've always been a Sony guy and also considered the XBR8 series but could not justify Sony's price markup and for me, the picture quality wasn't representative of actual real world images even after fiddling with the controls. I'm obviously biased and it's personal taste, but head over the AVS forums and you'll see that the Elite is still regarded as the king. I waited for 10 months before purchasing the Elite and extremely glad I held out till now as you can get a $4500 TV for almost half that price.

Trouble with setting correct ACL for publication - EDIT_QUERY error

*moved from BusinessObjects Integration Kits - SAP
Hi All, I get an error: EDIT_QUERY RWI00850 Scheduling document 'xxx' (Id:xxxxxxx) failed for the following users:
The issue is related to this post http://www.google.dk/url?sa=t&source=web&cd=4&sqi=2&ved=0CDMQFjAD&url=http%3A%2F%2Fforums.sdn.sap.com%2Fthread.jspa%3FthreadID%3D1561142%26tstart%3D-3%26messageID%3D8549187&ei=gq2ATcWNJc3Nsgagraz3Bg&usg=AFQjCNHAFv_8mRsLdK-INp9w_JiuCqS3xA
We run xi 3.1 fp 3.3
The publication runs fine, when I add the user to the Admin group, however can't get it to work when I use my custom group with full access ACL assigned at top level to folder, universes, connections and full access ACL to Web Intelligence, infoview, designer appllications.
Furthermore, when I use my custom ACL I can publicate a wbei report based on efashion. However, if I use the same publication - just switching the content to a webi based on a bex universe, I get the EDIT_QUERY error. Adding my test user to the admin makes it run - so what am I missing???
Is there a difference in where and how bex based universes are publicated and the efashion universe???
I've even tried to enable edit objects and edit query in the temporary storage folder, that didn't help either.
please help!
BR
Jess

Does any one know whether it is a potential bug or it is something I overlooked??
BR
Jess

Does anyone have a set of .VIs for talking to a generic modem?

Hi and thanks for reading.
I don't want to have to know AT commands, just what I want to do. Such as go off hook, dial a number, wait for answer etc.

Stan,
Maybe the attached VI will help. This VI library contains utilities to talk via the serial port to a modem. Sending standard Hayes-compatible AT commands to the modem allow it to dial a number, send data, hang up, etc.
If you have the Internet Toolkit, it assumes you already have a valid TCP/IP connection. However, many web browsers such as Netscape and Internet Explorer have auto-dialing options that will start dial-up networking automatically when you launch your browser. The only trouble is that the auto-dial wizards can require the user to push buttons, but there is a Shareware program called DUNCE which will take care of the button pushes for you in the auto-dial wizards so the user does not have to intervene in the dial-up process.
You can la
unch the browser from LV and then have the browser configured for auto-dial and that should take care of the problem. I did not actually try this out myself, but in theory, it should work.
Zvezdana S.
National Instruments
Attachments:
Modem.llb ‏334 KB

HI THERE I HAVE TO I PODS WITCH WERE GIVE TO ME FROM A FAMILY MEMBER CAN I SET THEM UP FOR AN ACCOUNT FOR ME BUT I DONT HAVE THE OLD ACCOUNT DETAILS

hello there i have been givin a i pod classic from my brother and want to know can i set up a apple acount even if i dont have his account details

The procedure is Settings>Messages>Send & Receive at>You can be reached by iMessages at>Add another email address. The email address has to be a valid working email address, obviously. Apple should verify the email address and you have to go to the inbox of that email account, read the verification email from Apple and follow the inductions in the email in order to complete the verification. Then you go back to the settings, uncheck your email address and check the new email address to be used as the contact email address.

Environments: Anyone experienced with setting them up for Midi?

Similar Messages

Maybe you are looking for