ENVVAR JAVA_HOME gets blank

Hi,
On our V6R1 system, we have set the JAVA_HOME = /QIBM/....jdk14, however UaServer failed to start so I had to set it to jdk15.
Now UaServer runs fine, however if I SignOff from user <SID>OFR then the JAVA_HOME gets blank and causes Jdk exception errors. BTW, I tried to set it at *JOB level as well as *SYS level
I explicity have to set the JAVA_HOME=/QIBM/....jdk15 each time I login. I suspect after the upgrade if the JAVA variable gets blank then SAP might stop. I even tried setiing the JAVA_HOME using Qshell, still the same.
How can I permanently set it so that SAP does not run into issues? Shall I set it at Job level or system level? Do I need to set it somewhere else also...pls help.
Regards,
Nick

Hi Nick,
Can you explain in more detail what happens? To me it makes no sense to talk of an environment variable after logoff. So, please tell us also in which application you see the Java exceptions.
Regarding the impact to other scenarios than UASERVER which you know has a problem (cf. your thread [UASERVER could not be started - upgrade from 46c to ERP2005SR3 on V6R1|UASERVER could not be started - upgrade from 46c to ERP2005SR3 on V6R1]) I cannot see where we need JAVA_HOME being explicitly set in an SIDOFR environment if there is no SAP NetWeaver Java involved. In the latter case JAVA_HOME should be set automatically.
You can look for general information about Java on our platform in note 1269647 and its related notes.
HTH,
Thomas

Similar Messages

After reading and resetting everything with Keyboard I still get blank white screen. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans at full speed.

After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
EtreCheck version: 1.9.15 (52)
Report generated August 30, 2014 at 6:56:41 PM EDT
Hardware Information: ?
    iMac (21.5-inch, Mid 2011) (Verified)
    iMac - model: iMac12,1
    1 2.5 GHz Intel Core i5 CPU: 4 cores
    4 GB RAM
Video Information: ?
    AMD Radeon HD 6750M - VRAM: 512 MB
        iMac 1920 x 1080
System Software: ?
    OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
Disk Information: ?
    ST3120026AS disk0 : (120.03 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted>: 209.7 MB
        Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    HL-DT-STDVDRW GA32N
USB Information: ?
    Apple Inc. FaceTime HD Camera (Built-in)
    CHICONY USB NetVista Full Width Keyboard
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Internal Memory Card Reader
Thunderbolt Information: ?
    Apple Inc. thunderbolt_bus
Gatekeeper: ?
    Anywhere
Kernel Extensions: ?
    [loaded]    com.nvidia.CUDA (1.1.0) Support
    [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
    [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
    CUDA: Path: /System/Library/StartupItems/CUDA
    FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
    [loaded]    com.adobe.fpsaud.plist Support
    [running]    com.arcsoft.eservutil.plist Support
    [running]    com.bjango.istatmenusdaemon.plist Support
    [loaded]    com.oracle.java.Helper-Tool.plist Support
    [running]    com.sophos.autoupdate.plist Support
    [running]    com.sophos.configuration.plist Support
    [running]    com.sophos.intercheck.plist Support
    [running]    com.sophos.notification.plist Support
    [running]    com.sophos.scan.plist Support
    [running]    com.sophos.sxld.plist Support
    [running]    com.sophos.webd.plist Support
Launch Agents: ?
    [running]    com.arcsoft.esinter.plist Support
    [running]    com.bjango.istatmenusagent.plist Support
    [loaded]    com.nvidia.CUDASoftwareUpdate.plist Support
    [loaded]    com.oracle.java.Java-Updater.plist Support
    [running]    com.sophos.uiserver.plist Support
User Login Items: ?
    Macs Fan Control
    Firefox
Internet Plug-ins: ?
    FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
    Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    JavaAppletPlugin: Version: Java 7 Update 67 Check version
    Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
    CUDA Preferences Support
    Fan Control Support
    Flash Player Support
    Java Support
Time Machine: ?
    Time Machine not configured!
Top Processes by CPU: ?
         1%    WindowServer
         1%    fontd
         0%    firefox
         0%    SystemUIServer
         0%    SophosWebIntelligence
Top Processes by Memory: ?
    229 MB    firefox
    156 MB    SophosScanD
    152 MB    InterCheck
    131 MB    com.apple.IconServicesAgent
    115 MB    SophosAntiVirus
Virtual Memory Information: ?
    424 MB    Free RAM
    1.53 GB    Active RAM
    1.37 GB    Inactive RAM
    699 MB    Wired RAM
    1.26 GB    Page-ins
    0 B    Page-outs

I'd start by getting rid of the following software responsible for these extensions.
Kernel Extensions: ?
    [loaded]    com.nvidia.CUDA (1.1.0) Support
    [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
    [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
    CUDA: Path: /System/Library/StartupItems/CUDA
    FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper
    2. AppDelete
    3. Automaton
    4. Hazel
    5. AppCleaner
    6. CleanApp
    7. iTrash
    8. Amnesia
    9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.
Be sure to remove your two Login Items. Finally do this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Instead of showing 0 in report its getting blank space

Hi Sap Gurus.
I am running the query in rsrt, in my report i am getting instead of 0 values it is showing Blank space. But in my source data there is value is 0. But when i execute the query its getting blank space. How to over come this problem.
could u please let me know.
Best Regards,
venkat.

Hi,
Check out this.. it might solve your issue.
in Query Properties
Tab: value display >> Zero value Display >> Select "zero as Default Text" under Display Zeros
And Tab: Rows/Columns >> Supress Zeros Option >> "Do not Supress" is selected.
Thanks
Jitu
Edited by: Jitenderkumar Danduvia on Feb 23, 2010 12:45 PM

How to get blank data in alv?

hi
im finding the difference between 2-dates...
below is my code......
my problm is wn there is no data in the gstri field then v_dat1 should be blank...but im getting zeros...
how to get blank instead of zero?
IF <fs_final>-gstrp is not INITIAL and
( <fs_final>-gstri is not INITIAL ) .
CALL FUNCTION '/SDF/CMO_DATETIME_DIFFERENCE'
      EXPORTING
        date1            = <fs_final>-gstrp
        date2            = <fs_final>-gstri
      IMPORTING
        datediff         = v_dat1
      EXCEPTIONS
        invalid_datetime = 1
        OTHERS           = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
    IF ( <fs_final>-gstrp GT <fs_final>-gstri ) AND
       ( NOT <fs_final>-gstri IS INITIAL ) .
      v_dat1 = -1 * v_dat1.
    ENDIF.
Regards
Smitha

Hi,
If you are using FM 'REUSE_ALV_GRID_DISPLAY' then In your fieldcatalog there is one component called 'no_zero' make it to 'X' like :
      WA_FLDCAT-TABNAME = 'IT_FINAL'.
      WA_FLDCAT-COL_POS = 1.
      WA_FLDCAT-SELTEXT_L = 'BOQ.Amt'.
      WA_FLDCAT-FIELDNAME = 'ZAMT'.
      WA_FLDCAT-NO_ZERO = 'X'.
      WA_FLDCAT-DATATYPE = 'CURR'.
      WA_FLDCAT-INTLEN = '20'.
      APPEND WA_FLDCAT TO IT_FLDCAT.
      CLEAR : WA_FLDCAT.
That's it,it will not display if the field value is zero.
Hope this helps,
Thanks & Regards,
Rock.

Getting blank space after paragraph in RTF template

Hi there,
Thanks so much for all your help for your help.
I am running into one issue in RTF template, wanted to share with you to get any input on this. I have paragraph and Idid put in table at the top and there is xml tag that gives names after that paragraph. but I get blank spaces after paragraph and it shows names from that xml tag.
I tried to remove spaces by deleting between pargraph and xml tag<name> , still i get blank page between paragraph text and names.
Can anyone help me or point me to get it resolved that would be greatly appreciated.

Thanks Varma for your prompt response and your time on this. I am still trying to get any other options to get this done as that is the requirement and with that blank page looks not fully satisfied for users and am trying any other ways to do implement this..
That's the reason I thought of putting this post again to get more inputs that may have.
Can anyone put some light onthis.
Thanks a lot..
sk

I get blank printouts when printing from Firefox (see details) anyone know how to remedy this.

I receive the following error mesage when clicking on the properties button within the 'print' dialogue box "Function address 0x0 caused a protection fault. (exception code 0xc00000005) The application property sheet pages(s) may not function properly."
When I attempt to print any pages from Firefox, the printer goes through the motions and seems to print every word but no ink touches the paper, I just get blank printouts. Printing from all other web browsers and desktop apps is just fine (Lexmark P3150, Win XP SP3).
Anyone know how to resolve this??

Hi Justinescc,
The bottom of this article contains some steps you can try if you're unable to AirPrint:
AirPrint Basics
http://support.apple.com/kb/HT4356
Cheers,
- Ari

OTF to PDF - Getting blank PDF Internal table with CONVERT_OTF func module

All
i've captured OTF from smartforms and tried converting to PDF through 'CONVERT_OTF_2_PDF' FUNCTIOn module and after emailing to external email id, i found logo is completely disturbed (characters in logo got mixed up)..... later i tried converting with ''CONVERT_OTF' function module, but here i'm getting blank PDF internal table....
what am i missing in both ?
my intention is converting otf to pdf and emailing...though there are thousands of similar threads are available , none of them are related to my exact problem, which is logo is getting mixed up or disturbed.... any suggestions ?
Thanks in advance

Hi,
You need to use the function module SX_OBJECT_CONVERT_OTF_PDF to create the PDF from OTF ..
Here is an example program
report ZPDFPRNT no standard page heading.
TABLES: TST05.
DATA: BEGIN OF ITAB OCCURS 0,
   TLINE(255),
END OF ITAB.
DATA: BEGIN OF ITAB2 OCCURS 0,
TLINE(255),
END OF ITAB2.
DATA: BEGIN OF ITAB3 OCCURS 0,
TLINE(255),
END OF ITAB3.
DATA: BEGIN OF OTF_TAB OCCURS 0,
TLINE(255),
END OF OTF_TAB.
DATA: LEN_OUT LIKE SOOD-OBJLEN.
DATA: LEN_IN LIKE SOOD-OBJLEN.
DATA: BEGIN OF DATA_SET OCCURS 200,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000),
END OF DATA_SET.
DATA: BEGIN OF OTF_PAGE OCCURS 200.
INCLUDE STRUCTURE ITCOO.
DATA: END OF OTF_PAGE,
OTF_PAGES TYPE P,
OTF_MAX_PAGES TYPE P VALUE 10.
DATA: BEGIN OF OTF_CONTROL.
INCLUDE STRUCTURE ITCPP.
DATA: END OF OTF_CONTROL,
FORCE_RAW_OTF VALUE ' ',
L100_EXCLUDE(4) VALUE 'OTFJ',
BEGIN OF OTF_PAGE_INDEX OCCURS 20,
LINE_NUM TYPE P,
END OF OTF_PAGE_INDEX,
CUR_OTF_PAGE VALUE 1.
DATA: DATA_SET_LINECOUNT TYPE P,
DATA_SET_MAX_LINES TYPE P VALUE 100000,
DATA_SET_VALID TYPE C VALUE ' ',
DATA_SET_IS_OTF TYPE C VALUE ' ',
DATA_SET_LENGTH(5) TYPE C,
LINE_SPECIAL LIKE DATA_SET-DATA_LINE,
NEED_LINE_SPECIAL TYPE C,
DSN_TYPE(8) TYPE C.
DATA: FCODE(4) TYPE C,
DATE TYPE D,
TIME TYPE T,
RC(10) TYPE C,
ERRMSG(100) TYPE C,
PRINTJOB_CREATED(1) TYPE C,
PRINTJOB_CLEARED(1) TYPE C,
PRINTJOB_LIST(1) TYPE C,
DISPLAY_MODE(1) TYPE C,
LINE_MAX TYPE P VALUE '100000',
NEW_SCREEN_300(1) TYPE C,
MULTI_PRINT_300(1) TYPE C,
PRINT_ALL_300(1) TYPE C,
PRINT_COUNT_300 TYPE I,
SHOW_USER_100 TYPE C VALUE ' ',
ERROR_DISPLAY_LEVEL TYPE C VALUE '9',
NEXT_ERROR_DISPLAY_LEVEL TYPE C,
PREV_ERROR_DISPLAY_LEVEL TYPE C,
START_300(5) TYPE C, END_300(5) TYPE C,
SEP LIKE SY-VLINE,
DEFAULT_PRI,
TSP01_BUF LIKE TSP01,
TSP01_CURLINE LIKE SY-STARO,
TSP01_CURCOL LIKE SY-CUCOL,
TSP01_CURROW LIKE SY-CUROW.
DATA: BEGIN OF DATA_SET_LINE,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000),
END OF DATA_SET_LINE.
DATA: STATUS LIKE SY-SUBRC.
DATA: WGF_MESSAGE(80).
DATA: H_PATH(20) TYPE C.
DATA: H_MASK(20) TYPE C VALUE ',.pdf ,.pdf. '.
DATA: FILE_NAME(20).
DATA: FILENAME LIKE RLGRAP-FILENAME.
DATA: IMPORT(132).
PARAMETERS: IDENT(5) TYPE C.
PERFORM GET_OTF_TAB.
LOOP AT OTF_PAGE.
   OTF_TAB-TLINE = OTF_PAGE.
   APPEND OTF_TAB.
ENDLOOP.
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
FORMAT_SRC = 'OTF'
FORMAT_DST = 'PDF'
DEVTYPE = 'ASCIIPRI'
LEN_IN = LEN_IN
IMPORTING
LEN_OUT = LEN_OUT
TABLES
CONTENT_IN = OTF_TAB
CONTENT_OUT = ITAB2
EXCEPTIONS
ERR_CONV_FAILED = 1
OTHERS = 2.
PERFORM GET_PATH USING 'PDF_FILE'.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FILENAME
FILETYPE = 'BIN'
BIN_FILESIZE = LEN_OUT
TABLES
DATA_TAB = ITAB2
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
OTHERS = 8.
*& Form GET_OTF_TAB
FORM GET_OTF_TAB.
DATA: PART(4) VALUE '0001',
BEGIN OF MSG,
A(40),
B(40),
C(40),
END OF MSG.
REFRESH DATA_SET.
DATA_SET_LINECOUNT = 0.
DATA_SET_IS_OTF = ' '.
OTF_PAGES = 0.
REFRESH OTF_PAGE_INDEX.
CALL 'RSPOACSD'.
SELECT * FROM TST05 WHERE DTHREAD = 'X'.
CALL 'RSPOAOSD'
ID 'ID' FIELD IDENT
ID 'TYPE' FIELD TST05-DTYPE
ID 'RECTYP' FIELD 'VYL----'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
DSN_TYPE = TST05-DTYPE.
IF DSN_TYPE(3) = 'OTF'.
    DATA_SET_IS_OTF = 'X'.
ENDIF.
ENDIF.
IF STATUS <> 24. EXIT. ENDIF.
ENDSELECT.
DATA_SET_VALID = 'X'.
DATA_SET_MAX_LINES = ( LINE_MAX * '1.1' ) + 100.
DO.
CLEAR: DATA_SET_LINE, DATA_SET_LENGTH.
CALL 'RSPOARSD'
ID 'BUFF' FIELD DATA_SET_LINE+5
ID 'DATALEN' FIELD DATA_SET_LENGTH
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 36.
WHILE STATUS = 36.
CALL 'RSPOACSD'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
ADD 1 TO PART.
IF DATA_SET_IS_OTF = ' '.
CALL 'RSPOAOSD'
ID 'ID' FIELD IDENT
ID 'TYPE' FIELD DSN_TYPE
ID 'PART' FIELD PART
ID 'RECTYP' FIELD 'VYL----'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
ELSE.
CALL 'RSPOAOSD'
ID 'ID' FIELD IDENT
ID 'PART' FIELD PART
ID 'TYPE' FIELD DSN_TYPE
ID 'RECTYP' FIELD 'VYL----'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
ENDIF.
IF SY-SUBRC NE 0. EXIT. ENDIF.
CLEAR: DATA_SET_LINE, DATA_SET_LENGTH.
CALL 'RSPOARSD'
ID 'BUFF' FIELD DATA_SET_LINE+5
ID 'DATALEN' FIELD DATA_SET_LENGTH
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ENDWHILE.
ENDIF.
IF STATUS <> 0 AND STATUS <> 40. EXIT. ENDIF.
DATA_SET = DATA_SET_LINE.
IF NOT ( DATA_SET_LENGTH IS INITIAL ).
DATA_SET-DATA_LENGTH = DATA_SET_LENGTH - 1.
ENDIF.
APPEND DATA_SET.
ADD 1 TO DATA_SET_LINECOUNT.
IF DATA_SET_IS_OTF = ' '.
IF DATA_SET_LINECOUNT >= DATA_SET_MAX_LINES.
CLEAR DATA_SET.
APPEND DATA_SET.
MOVE '----
' TO DATA_SET-DATA_LINE.
APPEND DATA_SET.
CLEAR DATA_SET.
APPEND DATA_SET.
WRITE: 'Abbruch nach'(029) TO MSG-A.
WRITE: DATA_SET_MAX_LINES TO MSG-B.
WRITE: 'Zeilen.'(030) TO MSG-C.
CONDENSE MSG.
DATA_SET-DATA_LINE = MSG.
APPEND DATA_SET.
EXIT.
ENDIF.
ELSE.
MOVE DATA_SET_LINE-DATA_LINE TO OTF_PAGE.
APPEND OTF_PAGE.
IF OTF_PAGE(2) = 'EP'.
ADD 1 TO OTF_PAGES.
IF OTF_PAGES >= OTF_MAX_PAGES.
    MESSAGE S229(PO) WITH OTF_MAX_PAGES.
    EXIT.
ENDIF.
ELSEIF OTF_PAGE(2) = 'OP'.
OTF_PAGE_INDEX-LINE_NUM = DATA_SET_LINECOUNT.
APPEND OTF_PAGE_INDEX.
ENDIF.
ENDIF.
ENDDO.
IF STATUS <> 0 AND STATUS <> 12.
CALL 'RSPOACSD'.
MESSAGE E112(PO) WITH STATUS RC ERRMSG.
ENDIF.
CALL 'RSPOACSD'.
STATUS = SY-SUBRC.
IF STATUS <> 0.
MESSAGE E112(PO) WITH STATUS RC ERRMSG.
ENDIF.
ENDFORM. " GET_OTF_TAB
*& Form GET_PATH
FORM GET_PATH USING P_FILENAME.
CLEAR: H_PATH, FILE_NAME.
FILE_NAME = P_FILENAME.
CALL FUNCTION 'WS_QUERY'
EXPORTING
QUERY = 'CD' "// Current Directory
IMPORTING
RETURN = H_PATH.
CONCATENATE FILE_NAME '.pdf' INTO FILE_NAME.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = FILE_NAME
DEF_PATH = H_PATH
MASK = H_MASK
MODE = 'O'
IMPORTING
FILENAME = FILENAME"dbname
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
ENDFORM. " GET_PATH
Regards
Sudheer

When I open a PDF with Firefox 4 I get blank new tabs continuously opening without stop. How do I fix this?

When I open a PDF with Firefox 4 I get blank new tabs continuously opening.

See:
* [[Firefox keeps opening many tabs or windows]]

I have stopped too many scripts in Firefox and I can't open any websites in Firefox anymore. I just get blank pages. What do I do now?

3 websites gave me this message:- "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete." I chose to stop the script each time. However I have stopped too many scripts in Firefox and I can't open any website in Firefox anymore. I just get blank pages. What do I do now?

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
#Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
'''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
* '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
* '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
#Go to the Windows Start menu and click on "Computer".
#In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
#Find the "Program Files (x86)" folder or "Program Files" folder.
#* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
#* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
#Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
Now, go ahead and reinstall Firefox:
#Double-click the downloaded installation file and go through the steps of the installation wizard.
#Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

Satellite P200-1JR: Display suddenly gets blank only reboot helps.

Hi,
I have laptop Toshiba P200-1JR, and I'm satisfied by performances.
Unfortunately, I have experienced few problems for which I'm not sure if they are hardware (manufacture) or driver (software) problem.
1. Display sometimes (maybe once a week) suddenly gets blank. Nothing special wasn't done previously, which shpuld be the trigger. Just at once. Only reboot helps.
2. The same as 1, but previously dislplay just for few second gets crazy. Some side lines (like magnetic interrups) are on screen.
I've just downloaded bunch of driver updates (haven't applied them yet), but I want to ask before is this problem already known?
Best Regards,
Vladimir Stefanovic

I've applied most of the updates available on Toshiba site for this model, including BIOS update.
But the problem persists!
The screen started blinking uncontroled for about 15 seconds, then it become completely blank.
Then I've pressed Power button [Sleep mode], and again the same button [Wake from sleep], and the machine continued working normaly.
I'm not sure but I think that previously (before BIOS update) I had to restart the machine in order to get it work again.
I'm interested if anyone here had similar problem?
(I ask this because I want to know should I return it to salesman or should I wait for some update)

Item info gets blanked while creating RFx response

Hi,
I am facing a strange issue while creating the RFx response (SRM 7.0).
when I try to create a Bid, the item info (required quantity and Unit) gets blanked and this fields are blocked.
Did any one faced any similar issue. Any possible solutions.
Regards,
Francisco Salvado

Hi,
This subject is widely discussed in SDN, you could have searched SDN before posting this thread.
As you do not have info record, then tax code defaulted in the Purchase order by maintaining condition record only with your material (may be with other criteria)which you said item number 10.More details on default tax code, check link:
Default Tax code in P.O
Also check link for SDN rules
https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement
Regards,
Biju K

Getting blank pdf files when I try to view them on computers other than my Mac

I need some assistance. I keep getting blank pdf files when I try to view them on anything other than my Mac. I create them in either Illustrator or InDesign and I make sure that I select High Image Quality. I can view them just fine in my Acrobat reader, but the minute I send them out to others or view them on a PC with Acrobat Reader 7 i can't view them. I get this message "There was a problem reading this document (111)" Does anyone know the solution to this problem?

Many PC users still use older versions of Acrobat or Acrobat Reader. I know some people that absolutely refuse to update beyond Acrobat Reader 4.5, often times, that can contribute. Also if you've run PDF Optimizer and removed all the fonts. That can cause a problem.
Also, make sure you save pdf's with the .pdf extension. As much as they say the opposite PC's need to see that extension.

Mail stopped working. Now get blank screen with icons (delete, file, forward, etc) at top. Then goes blank. iPad 2 purchase 12/11

Mail stopped working. Now get blank screen with icons (delete, file, forward, etc) at top. Then goes blank. iPad 2 purchase 12/11

Try to reset your ipad and/or force quit the mail app
Reset
Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. No data will be lost.
Force close an app
Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.

Suppressed Header but in the same place getting blanks.

I have Suppressed Headers which was printing in all pages but in the same place/location, Iam getting blank space. Is there any other way other than using anchors to avoid this space problem.

it works even inside fields are fixed width. Thankyou fs
I have one more problem. My report has 2layouts based on parameter Iam printing each one on to the screen.
First layout is working fine and when I try to run the second layout which is below the first one ,and after grand total section(which is separate frame).
On the screen(apps output) Iam getting a page break symbol and all the column headers are printed once without data(blank page). Then from second page onwards its working fine. But the same pagebreak is appearing in between all the pages. How to over come this? please help me.

Getting Blank Screen

Hi Experts,
We has a custom java application which was deployed on Weblogic 8 in 2 JVM Cluster. Recently we have upgraded the Weblogic to version 10MP3. But sometime users are getting blank screens and once they hit F5 the screen comes back. Users are using IE7 and IE8. We are not able to test on any other browser as that is not certified within the orgnization. Any help will be greatly appreciated.
Issue is intermittent so very hard to troubleshoot/reproduce.
Regards
Shashi

You can check the logging, to see if there are any messages related to the issue.
Maybe this discussion can help (http://social.msdn.microsoft.com/forums/en-US/iewebdevelopment/thread/48e60100-1a28-44ca-b382-774b1b7fb65d)

ENVVAR JAVA_HOME gets blank

Similar Messages

Maybe you are looking for