Envy 110e won't print wireless with my mac osx 10.7.5 ok with usb,

very dissapointed with my envy 110e wire less printer, just wont keep its wire less connection. Fine with usb connection, but keeps dropping wire less. Now on reinstalling it gets as far as loading, however it recognises device, lists all its details, (type ip address etc) but then error message comes up and says it cant find printer on network!!!!!!! its going to be returned or even float tested with all the water about!!

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

HP Envy 5530 won't print wirelessly

I have a laptop, mobile and desktop at my house. When I first bought my printer, it connected through my wireless BT hub fine. The password worked and it printed from my mobile as well. Then I tried printing a month later. It would not work, despite saying it was connected. My other computer Windows 7 computer and I have a Windows 7 laptop. We also missed out on a InstantInk black cartridge. It still is recognised by the desktop computer. It just won't print on command. We had to buy a USB cable for the laptop. That will work. I bought this printer to make it easy for all of our devices to print. I don't understand why it started working, then suddenly stopped. We ran diagnostics and also phoned the HP helpline. No one could help us. Please let us know what is wrong as we haven't changed any wireless settings. The hub remains the same and our other devices in our home can use the internet. I will have to return this printer if it doesn't work soon. I bought it in November.

Hello , Welcome to the HP forum. I understand that you are having a network communications issue with your Envy 5530. I would like to help. I am surprised that the HP technical support people could not get this fixed for you.Could I have a list of any trouble shooting steps you have already done? Have you restored the network defaults on the printer and ran the wireless setup wizard again?Have you turned the hub off then on again? Try going through this document and let me know if it helps.Printer Does Not Maintain Wireless Connection

New Envy 5534 won't print wirelessly

I have installed a new HP Envy 5534 MFD for my parents. Works fine from workstation where it is wired in with USB2 (single page, scan, copy, duplex) however from a Asus laptop running Win8.1 it will not now print anything.
Tested fine when installed, printing a test page but today won't even do that. Have uninstalled the HP software from the laptop and downloaded and installed the latest driver package from the HP website but still no response from the printer. When trying to print a Word doc (Office 2013 Pro Plus) using the duplex feature there is a really unhelpful message that pops up:
and from the Windows print dialogue:
The printer is correctly linked into the Wi-Fi so am at a loss of what to try to resolve this. Reading the manual there is no mention of intervention necessary printing wirelessly.

Psychoviking
Welcome to the HP Community Forum.
Starting off -- this is not my specialty: no shooting the messenger.
You might try Restarting everything, including the Router
Leave the computer with the USB switched off till last... In fact, leave it off until you can test the wireless system setup. Test all the way -- that includes testing a printed document, not just a test page from the printer.
It might be that the wireless radio on the printer is shutting off when you connect the USB to the other computer.
If you can get the Asus W8.1 system to print
and then
the USB desktop will NOT print (just because the world hates you)
You might try:
Be sure you can get Full Feature Software for the Desktop for the printer
Remove existing printer software from the desktop
Install Full Feature Software for the Printer on the Desktop
Some Help for whatever you decide to do:
Removing Printer Software
Stop programs: games, email, browsers…
Create a Restore Point:
Restore Point XP OR Create a Restore Point – Win7 OR Create a restore point Win8
Control Panel > set icon view > Programs and Features >
Scroll down, find the Printer program > Right-Click on the program > Uninstall
Repeat these steps for each occurrence of your printer's name until none remain in the list.
Restart / Reboot the computer and log in
Install the Full Feature Software for the printer following the instructions
Install Full Feature Software – Printer
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

HP Envy 5530 won't print in color from Mac

My printer won't print anything in color from my Mac. I've tried printing from Word and from a PDF, and each time only black ink will show up. I've tried:Removing the black ink catridge and printing with just colorShaking the color ink cartridgeRemoving and putting back the color ink cartridgePrinting a test page (color doesn't work for this, either- nothing prints at all when I do this)Double and triple checking my print settings The only ink color that my computer says is "low" is yellow. I'm printing wirelessly, but because black ink prints fine, I'm willing to bet there's no connection problems. DO NOT try to sell me more ink; I am already upset with HP enough as it is. The last thing I want to do right now is buy more of its ineffective products. Please help me fix this problem.
Thank yoooouuuuu

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having issues with printing in colour from your Mac to your Envy 5530. I can help with that. To start, this document outlines how to troubleshoot print quality issues with your printer. When you get to the Solutions that suggest replacing the cartridges you can instead click on this link to contact HP Support. On this page if you scroll down and fill out the form you will find their contact number. I will warn you that if the cartridge is showing as low their solution may be to replace the cartridge with a new cartridge. I hope this helps and I hope you have a great day!

How do I get my Canon MX860 back online so I can print wirelessly on my Mac OSX 10.8.4?

I recently installed a new and bigger Time Capsule on my MacBook Pro system and since doing so, I lost the ability to print wirelessly on my Canon MX860 printer. I am using Mountain Lion OSX 10-8-4.
I note Pahu discussion in another group on this same issue but it pertains to Snow Leopard. I don't know how much difference it makes but when I followed his instructions, I did not get my problems resolved. I am inserting here his discussion and in bold my comments where my results differed.
Pahu comments follow (min results in bold): Some of the new models of Canon inkjet let you set the network settings using the touch panel on the printer. I am not sure if your MX860 has this setting, called Easy Setup under Device Settings > Network. If it does then you can change the network settings and create a new print queue on the Mac.
If it doesn't have the ability to change the settings via the keypad then you will have to connect the printer via USB to your Mac, which will create a USB connected print queue. If you then open Print & Fax, select this USB MX860 print queue and then press Options & Supplies, you will see the Utility tab. I DID NOT HAVE THAT TAB I FOLLOWEED HIS LEAD USING THE FOILLOWING: MAC HD/Library/Printers/Canon/BJPrinter/Utilities With this selected then click Open Printer Utility. This will open the Canon IJ Printer Utility and within this utility you will see the Network Settings button. Select this and you can then enter the new network settings, such as the SSID, type of security being used and the password for the network. Save the changes, turn off the power to the MX860 and then disconnect the USB cable.
Now turn the printer back on and open Print & Fax again. For the USB print queue you just created, you can delete this. I NEVER SAW ANY PRINT QUEUES AFTER TURNING THE PRINTER BACK ON. ONLY THING I HAD WAS THE PRINTER LISTED IN THE WINDOW SHOWING IT WAS OFFLINE. And for the old networked print queue, you need to delete this also. You may also need to delete the networked scanner queue if you had one. So with all the old queues to the MX860 removed you can then add the new network printer. I DID TWO THINGS, FIRST LEAVING THE PRINTER IN THE WINDOW, I TRIED ADDING USING + BUT NOTHING HAPPENED. THEN I TRIED DELETING THE PRINTER IN THE WINDOW AND THEN TRIED HITTINH + BUT NOTHING EVER APPEARED. HAD TO RECABLE THE PRINTER TO THE MACBOOK TO GET PRINTER BACK. Click the + and wait for the MX860 to appear as a printer - it will appear first as a scanner and you can either add that now or after adding the printer. NONE OF THIS HAPPENED AND I LET IT SIT FOR SEVERAL MINUTES. Several seconds after the scanner appears the printer should also appear, showing canonijnetwork in the Kind column. DID NOT HAPPEN. Select this and the Print Using menu should automatically select the Canon MX860 series printer driver. When it does click Add to complete the network print queue creation and repeat the steps to add the network scanner if you need it. OBVIOUSLY, NONE OF THIS HAPPENED EITHER.
NOW IT IS ME AGAIN. Can someone please help me with this mess? I am so frustrated with dealing with this for three days and the only way I can print is using the RSB cable which is not so cool strung across my bedfrom the computer to the printer. Any guidance would be appreciated. I am an old man of 73 and way over my head with this mess. Don't know why Canon has to make this so difficult. Thanks in advance, Ron Wikoff

I too am experiencing the same problem, my Canon MX860 printer is no longer connecting to my Airport Extreme Router. I tried following the directions on Canon's website http://www.usa.canon.com/CUSA/assets/app/pdf/wireless/router_network_change_mx34 0_mp495_mx860_mp980_mp620_mac.pdf
I have tried uninstalling all of the printer drivers, as suggested in another apple discussion, then running the Canon IJ network tool.
I tried PAHU's response above:
Okay. No facility to add the MX860 to an Apple wireless network using the control panel so you will need to use the Canon IJ Network Tool.
So with the Mac connected to the MX860 via USB cable, open Canon IJ Network Tool (which should be located in Applications > Canon Utilities > IJ Network Tool). If you are looking in the other path you mention above, this could be an older version so download and install this latest version of the IJ Network Tool.
With the IJ Network Tool open, the first window talks about adding the printer to the network. Ensure the setting "Use the printer on the network" is set. Click OK
From the next window, the MX860 should be shown and as connected to the Mac via USB. Select it and click OK.
The next window will show the utility searching for wireless access points. A new window will then appear asking you to confirm the connection to the access point and the text will show which access point was found - which should show "Ronald Wikoff's Network". Click Yes to continue. When a window appears stating that the Canon IJ Network Tool wants to use your password, click Allow. (I cannot make it past this step. The Canon IJ Network Tool does not aoutmatically find my password. Instead I am taken to a screen where I type in my password and then attempt to connect.)
Now the window will take several seconds to setup the printer and should show a Setup Completion window. Click OK. (I never make it to this window. I receive an error message that that says the printer cannot communicate with the access point and to check the password. I checked the password then tried again. I even changed the password in the airport utility to make sure I had the correct password and it still did not work. I am starting to suspect that this may be related a recent Airport utility upgrade to 6.3.1 a few days ago.)
This will make the Add printer window appear. In the list, the "Canon MX860 series (00.00.85.xx.xx.xx)" should be visible. If it is, select it. The "Use" menu should then show "Canon MX860 series". If it does, click Add. This will add the network printer to the Mac.
If you now open Print & Scan, the "Canon MX860 series (00.00.85.xx.xx.xx)" should be in the printers list, as well as the Canon MX860 series. This latter one is for the USB connection. You could delete this printer and disconnect the USB cable.
The last step is to print a document to this network printer.
I plan on calling Canon tomorrow but if you have any other options for my to before then I am open to suggestions.

My HP dv4-2045dx won't print wirelessly with my HP Officejet 6500 E709n

My HP Pavillion laptop won't print wirelessly with my HP All In One printer. It will print if it is hooked up, and the printer works wirelessly with my other computer. I've uninstalled the printer and updated the drivers. The print wizard goes through all of the steps to configure wirelessly, finds my printer, tries to connect, and fails at the last minute each time. I believe it may have something to do with the fact that I also can't scan to my laptop.
P.S. It used to print wirelessly. I have no idea what changed.

Yup, here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76971-1&cc=us&dlc=en&lc=en&...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My MG8120 won't print wirelessly from my MacBook running OS 10.9.5. Works fine with HP printers.

My MG8120 won't print wirelessly from my MacBook running OS 10.9.5 (Mavericks). It works fine with all of the other HP printers in the office. Another user has the same problem with her PC running Windows 7. And she, too, has no problems printing on the other HPs. I or she cannot print to any of three Canon printers in the office.

Hi,
Please try the following steps,
Download every updates from Apple and HP
Reset or Delete the printer from your mac (it may work trhough USB)
Reset all settings into default settings on your printer
Turn off or unplug mac, printer, modem, router
Plug everything and reboot all
Reconnect the printer to home wifi network and mac also reconnect to the correct network
I work for HP. I am speaking for myself and not for HP.
Say thanks by clicking the Kudos Thumbs Up in the post.
If my post resolved your problem, please mark it as an Accepted Solution

CP1025nw won't print wirelessly; two copies of printer appear in the network!

My two Macs running Mountain Lion (10.8) won't print wirelessly to the HP CP1025nw. HP Setup Assistant can't find the printer after it's set up wirelessly. The computers see the printer wirelessly when I try to add it, but there are TWO copies of the printer, and they won't print. Sometimes they seem to think the printer is already in use, possibly because there are two copies.
The printer prints fine through USB, though.

Same issue here, the CP1025nw can't print multiple copies UNLESS the user is a local administrator; which in this domain environment is not allowed. So another solution must be found.
The common answer is to adjust the "mopier mode" however this driver does NOT allow for that to be changed. The universal drivers typically do have the mopier setting but I could not find any compatible colour universal 64bit drivers that would work with the CP1025nw.
Even tried finding something in group policy and/or printer permissions, still no luck.
Please help!
We're all in it together.

Printer won't print wireless

I have a OfficeJet Pro 8600 Plus that won't print wirelessly. I am using Mac OS 10.6.8
To date, I have followed suggestions on the support forum and have tried
1) deleting and reinstalling printer,
2) rebooting all (printer, computer, wireless router),
3) Print test page (worked),
4) reset printer,
5) print network config page (all looked good),
6) checked the printer connection to computer and all was well. I am out of ideas. Please help.
My printer is only 8 months old. Worked fine 2 days ago. I called HP support and they want me to download software to "take over" my computer - I don't feel comfortable with this. They refuse to begin any troubleshooting without that method and refuse a manager. I'm about ready to throw this printer out the window.

It sounds like the printer and your Mac are connected to the network. If the Mac cannot find the printer, it may be the router's inability to properly supprt Bonjour.
What kind of router is it?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My HP series 3310 won't print wirelessly after upgrading from windows XP to windows 7 32

My HP Photosmart won't print wirelessly since I upgraded from Widows XP to Windows 7 32

Yup, here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76971-1&cc=us&dlc=en&lc=en&...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do i print wirelessly from my mac to my canon pixma MG5200

How do i print wirelessly from my mac to my canon pixma MG5200

You want to look at this link first. it is in the article popsted above but I figured I post a link to in here so you don't miss it. It has to be the first thing you do.
http://support.apple.com/kb/HT3500
You have to first connect your printer to your network. Along with that Apple article read the printers setup instruction.

How can I download a driver for a Brother printer DCP-J411ODW for Mac OSX 10.9.1?

How can I download a driver for a Brother printer DCP-J411ODW for Mac OSX 10.9.1? I go to the right place on the Brother website and instead of downloading a driver it says there is a problem. Also something I did download and stuff on the CD provided with the printer is for a PC not a MAc. Help please.

OK, connecting a Wi-Fi printer is a 2 step process.
Connect printer to your network
Have computer to "see" printer on the network.
Follow Apple's steps for connecting a Wi-Fi printer in Printing in OS X. Read the article in it's entirety before installing.

Which CS Master Suite Products CS2,3,4,5,5.5,6 work with which Mac OSx 10.5, 10.6, 10.7, 10.8?

You have no idea what a journey it has been to try to find the answer to all of this. Here is my stab which is open for input.
Which CS Master Suite Products CS2,3,4,5,5.5,6 work with which Mac OSx 10.5, 10.6, 10.7, 10.8?
- When I recently installed 10.6 on a 10.5 Macbook Pro with CS2 Master Suite, I lost all access to CS2. End of story. Unhappy ending at that.
- I have CS4 Master Suite on a MacPro using OS 10.6.8, but my understanding is that if I go to 10.7, I lose all access to CS4. Another bad solution.
- Apparently the same is true of CS5 and 5.5. If one goes to 10.7, you will no longer be able to use those programs.
- The only Master Suite that is 10.8 compatible is CS6. New price $2,599, or $999 upgrade from CS5 or 5.5.
32bit vs 64bit
And to look at 32 bit vs 64 bit briefly. My CS4 Master Suite for Mac has two 64 bit programs, Premiere and After Effects. The Windows version of the same program also included Photoshop as 64bit.
- I assume that as CS Suites went from CS4 to 5 to 5.5 and then to CS6, that more and more programs take advantage of the 64 bit architecture. I don't know the specifics however. Would like to know.
- Also the MacOS has done the same. The newer the operating systems, the more the system takes advantage of mulitple processors, ram, and 64 bit architecture. Again, not sure of the sweet spot here.
And then there was the cloud!
Not sure what to do with that information.
- Great, new products updates all the time
     - downside, what if the updates outgrow my computer? Size and technology?
     - What if the updates outgrow my system software?
     - What if I want to open a cs4 document 5 years from now?
          - do I have to subsribe forever?
          - if I have CS6 on my computer, do some work, and want to open it 10 years from now, I still have the software and a computer.
     - Cost of $30 a month on a special, but $50 a month normally. Sounds cheap month to month, but after two years of $50, I have spent $1,200 on a product that I don't own!
Anyway, all of this comes up because I have multiple versions of Master Suite. I have multiple computers with various versions, and it all goes to crap if I upgrade the system software, or Adobe no longer supports the older versions. This is my contribution to the discussion. Apparently Adobe support had no archived articles to answer any of my questions, they suggested I look online. Great help. As I say, I don't much trust Adobe as my business partner anymore. I think I will work my way towards CS6 and see how long that takes me with Apple system upgrades. I'm not sure what OS 10.9, and beyond may bring as it relates to Adobe products, but I do need to get past my old 32bit applications running on an 8 core machine with 32gig of ram.
Which brings up one final point. I have Imac with 4 gig ram, Macbook pro with 8gig of ram, and MacPro with 32 gig ram. Will 4 gig ram run Cloud CS master suite? Its a worm hole that just keeps getting deeper! I have to find a place on that slope that is cost effective and allows me to hold my position for a few years until I can see how Adobe treats its cloud cutomers, and how well Adobe and Apple play together.
If you have any links to addtional information about various CS programs and which are ported to 64 bit, that would be helpful. I read some things about Rosetta and Java being the culprits in various upgrades to CS programs and the new Mac OS systems.
Also, if you have any work arounds to get CS5.5 to run on OS 10.7 or 10.8, curious to hear about those as well. As I understand it, 10.8 no longer includes the previous Java or Rosetta applications, but I was under the impression that they could be installed after.

Long story short: Simply get CC for teams. At 500 bucks a year it's a steal and those 5 licenses in the base package (or was it 10 even?) cover all your computers, at least the 3 ones you mentioned. For system requirements refer to the individual product pages.
Mylenium

I have a Mac OSx version 10.5.8 with Safari 5.0.6. How can I upgrade to ICloud and latest updates?

I have Mac OSx version 10.5.8 with Safari 5.0.6. Am I able to upgrade to ICloud? If so, how do I do it?

Take a look at this link, https://discussions.apple.com/thread/3103302?start=0&tstart=0

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

By doing a Google search.

Envy 110e won't print wireless with my mac osx 10.7.5 ok with usb,

Similar Messages

Maybe you are looking for