Envy 13 Windows 8 Touchpad drivers

Are there going to be new drivers for the Envy 13 touchpad? I've updated to Windows 8 and none of the gestures work.

Hi:
Some of the Envy 13 models have the synaptics touchpad software. If yours uses that, you may want to try the W8 driver from Synaptics directly.
http://www.synaptics.com/resources/drivers
Paul

Similar Messages

Touchpad drivers not installing for U310 Touch on Windows 7

My wife got a U310 Touch today which is a nice little computer. However it came with Windows 8 and she prefers Windows 7, so I took care of clearing the hard drive and installing Windows 7. We installed all the Windows 7 drivers from the Lenovo support site however the touchpad drivers fail to install. I tried manually installing the Synaptec drivers but it told me I don't have a Synaptec device. I then installed the Cypress drivers manually and rebooted but then the trackpad doesn't work at all.
I looked in Device Manager and the Hardware ID for the PS/2 Compatible Mouse says SYN2B0B which appears by all internet research to be a Synaptics hardware ID, which would make it understandable that the Cypress driver didn't work but really irritating that the Synaptics installer won't run because it says I don't have a Synaptics device.
What should I do? The default Microsoft drivers are OK but she really wants to disable the tap to click and adjust some of the other settings that aren't available without real touchpad drivers.

hi Ngravelyn,
Welcome to Lenovo Community Forums!
Please try this auto detect, Check if this one works
TouchPad Driver (Synaptics, Cypress)
0wto11ww.exe
142MB
Please make sure to uninstall any Installed driver for the touchpad first before installing this.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

ConfigMgr 2012 R2 Client Failes to Install on HP EliteBook laptops with Synaptics Touchpad drivers

I've come across a fairly frustrating issue that has been taking up way too much of my time that past week or so. The issue started a little after some of our larger sites were migrated from SCCM 2007 to SCCM 2012. I started getting complaints that one of
our technical workstations (HP 8770w) was not deploying properly. I started investigating the issue and the problem involved the removal of the old ConfigMgr 2007 client and install of the new SCCM 2012 R2 client.
The Windows 7 x64 OS WIM that I am using is one that was migrated from the 07 to 2012 environment and it has been working fine. During the Setup Windows and ConfigMgr step the old client is removed and the new one for the 2012 environment installs. There
has not been any issues with this, but I feel something has changed now that we are deploying the 2012 R2 client.
Back to the issue, what happens is that the ConfigMgr client fails to uninstall the old client. Looking in the client.msi_uninstall file you will see that it is unable to locate a couple of SCCM 2007 configmgr client patches that were installed so it can
uninstall it. I get the "Couldn't find local patch ''. Looking for it at its source." line in the uninstall file. When I look for that under HKEY_CLASSES_ROOT\Installer\Patches the ENTIRE directory structure is empty. There is not a single item
listed under patches.
Since the only thing that happens in between the pushing down of the WIM and installing the configmgr client is the drivers that is where I started to look. I started over with the basics (disk and network driver) and it was able to complete the OSD process
(like the other 30+ models we currently support). I added drivers one by one having the system re-image each time. When I got to the Synaptics TouchPad drivers the issue would return. I've tried around 5 different drivers offered from the vendor and they
all result in the same behavior.
I'm still actively troubleshooting how to FIX this issue, but I have no idea why this is going on. I thought I would share with the community on this issue and see if anyone else has observed this VERY odd behavior.
Here is a snippet from the client.msi_uninstall log:
=== Verbose logging started: 1/15/2014 22:59:34 Build type: SHIP UNICODE 5.00.7601.00 Calling process: D:\_SMSTaskSequence\OSD\GAS000EF\ccmsetup.exe ===
MSI (c) (6C:BC) [22:59:34:264]: Resetting cached policy values
MSI (c) (6C:BC) [22:59:34:264]: Machine policy value 'Debug' is 0
MSI (c) (6C:BC) [22:59:34:264]: ******* RunEngine:
           ******* Product: {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
           ******* Action:
           ******* CommandLine: **********
MSI (c) (6C:BC) [22:59:34:264]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (6C:BC) [22:59:34:264]: Grabbed execution mutex.
MSI (c) (6C:BC) [22:59:34:264]: Cloaking enabled.
MSI (c) (6C:BC) [22:59:34:264]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (6C:BC) [22:59:34:264]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (00:80) [22:59:34:264]: Running installation inside multi-package transaction {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
MSI (s) (00:80) [22:59:34:264]: Grabbed execution mutex.
MSI (s) (00:D4) [22:59:34:264]: Resetting cached policy values
MSI (s) (00:D4) [22:59:34:264]: Machine policy value 'Debug' is 0
MSI (s) (00:D4) [22:59:34:264]: ******* RunEngine:
           ******* Product: {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
           ******* Action:
           ******* CommandLine: **********
MSI (s) (00:D4) [22:59:34:264]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (00:D4) [22:59:34:405]: SRSetRestorePoint skipped for this transaction.
MSI (s) (00:D4) [22:59:34:405]: End dialog not enabled
MSI (s) (00:D4) [22:59:34:405]: Original package ==> C:\Windows\Installer\b8ba.msi
MSI (s) (00:D4) [22:59:34:405]: Package we're running from ==> C:\Windows\Installer\b8ba.msi
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: Uninstall Flags override found.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: Uninstall VersionNT override found.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: Uninstall ServicePackLevel override found.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: looking for appcompat database entry with ProductCode '{2609EDF1-34C4-4B03-B634-55F3B3BC4931}'.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (00:D4) [22:59:34:420]: MSCOREE not loaded loading copy from system32
MSI (s) (00:D4) [22:59:34:420]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (s) (00:D4) [22:59:34:420]: Couldn't find local patch ''. Looking for it at its source.
MSI (s) (00:D4) [22:59:34:420]: Resolving Patch source.
MSI (s) (00:D4) [22:59:34:420]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (00:D4) [22:59:34:420]: User policy value 'DisableMedia' is 0
MSI (s) (00:D4) [22:59:34:420]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Looking for sourcelist for product {D478B8EE-EE0A-4004-980B-4D55533EE3C2}
MSI (s) (00:D4) [22:59:34:420]: Note: 1: 1706 2: {D478B8EE-EE0A-4004-980B-4D55533EE3C2} 3:
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Failed to resolve source
MSI (s) (00:D4) [22:59:34:420]: Searching provided command line patches for patch code {D478B8EE-EE0A-4004-980B-4D55533EE3C2}
MSI (s) (00:D4) [22:59:34:420]: Could not find source for missing patch {D478B8EE-EE0A-4004-980B-4D55533EE3C2} -- orphaning this patch
MSI (s) (00:D4) [22:59:34:420]: Couldn't find local patch ''. Looking for it at its source.
MSI (s) (00:D4) [22:59:34:420]: Resolving Patch source.
MSI (s) (00:D4) [22:59:34:420]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Looking for sourcelist for product {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE}
MSI (s) (00:D4) [22:59:34:420]: Note: 1: 1706 2: {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE} 3:
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Failed to resolve source
MSI (s) (00:D4) [22:59:34:420]: Searching provided command line patches for patch code {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE}
MSI (s) (00:D4) [22:59:34:420]: Could not find source for missing patch {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE} -- orphaning this patch
MSI (s) (00:D4) [22:59:34:420]: SequencePatches starts. Product code: {2609EDF1-34C4-4B03-B634-55F3B3BC4931}, Product version: 4.00.6487.2000, Upgrade code: {252DA259-82CA-4177-B8D0-49C78937BA3E}, Product language 1033
MSI (s) (00:D4) [22:59:34:420]: SequencePatches returns success.
MSI (s) (00:D4) [22:59:34:420]: Final Patch Application Order:
MSI (s) (00:D4) [22:59:34:420]: Other Patches:
MSI (s) (00:D4) [22:59:34:420]: Internal Exception during install operation: 0xc0000005 at 0x000007FEFDBF35E1.
MSI (s) (00:D4) [22:59:34:420]: WER report disabled for silent install.
MSI (s) (00:D4) [22:59:34:420]: Internal MSI error. Installer terminated prematurely.
MSI (s) (00:D4) [22:59:34:420]: MainEngineThread is returning 1603
MSI (s) (00:80) [22:59:34:420]: No System Restore sequence number for this installation.
Unexpected Termination
MSI (s) (00:80) [22:59:34:420]: User policy value 'DisableRollback' is 0
MSI (s) (00:80) [22:59:34:420]: Machine policy value 'DisableRollback' is 0
MSI (s) (00:80) [22:59:34:420]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (00:80) [22:59:34:420]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (00:80) [22:59:34:420]: Restoring environment variables
MSI (c) (6C:BC) [22:59:34:420]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (6C:BC) [22:59:34:420]: MainEngineThread is returning 1603
=== Verbose logging stopped: 1/15/2014 22:59:34 ===

@Narcoticoo
I've not used the tool. This issue has also expanded since the original title as I'm getting the same behavior with the driver package that does not include the Touchpad driver anymore. I'm currently going back to just the network and storage driver to see
if it works or not.
However, this is the bigger issue I have:
I have an older build called Build 5.7 internally. Using that WIM and the same driver package (original one that has the Touchpad driver included) it works without issue. Never had a problem.
The new build is called Build 6.0 internally. This WIM and the same driver package has not been working at all.
We support about 35 models with our current Windows 7 x64 image and I am having the same failure issue on four different HP models. They are the 8770w, ZBook 17, Z600 and Z820. The majority of the other systems are Dell devices. Just for transparency sakes,
nothing Dell specific is in the core WIM that is captured.
So, Build 5.7 can deploy just fine on all pieces of hardware with their old driver packages. The new Build 6.0 intalls on almost every platform fine with their old driver packages. These four HP systems are nothing but trouble though. I've opened a case
with HP to see if they have noticed anything internally. I'm not too hopeful, but at least it is something. Maybe there is some odd conflict with a newer Windows patch or some odd dependency on older HP drivers. The new image has .NET 4.5.1, IE 10 and so forth.

Synaptic Touchpad drivers

For some time now my mouse hadnt been working so I was using an external mouse which worked correctly, but I gave the mouse out and I am trying to restore my touchpad on my computer so I went to the mouse property then I clicked on the software tab and realised there was no driver for my mouse.
Where can I find the synaptic touchpad drivers for Hp Pavilion dv7 2045eo? and If it is not a problem with the driver where can I find its solution?

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties with the Touchpad of your Notebook
We will surely assist you with this
Steps to drain the Static charge and loading default BIOS settings to resolve the issue
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till the Unit loads the Windows Operating system
Now please re-install the touchpad drivers from HP Website in order to resolve the issue
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Satellite L550-18M - Cannot find any Touchpad Drivers

Hello.
I just bought a Toshiba Satellite L550-18M and I can`t seem to locate any drivers for the full use of my touchpad (can`t use scrolling, nor zooming functions).
I tried installing some synaptics from the our sugestions official website and some synaptics drivers from a Toshiba Satellite L500D, but it didn`t help.
Please send your suggestions.
Thanks

Hi mate
I dont know what Windows OS you have but I assume you are using Win 7 64bit. Right?
The L550-18M belongs to PSLNEE series.
It seems that there are no many drivers published for this series.
But there are touchpad drivers for other Satellite L550 series.
The Alps Electric and Synaptics touchpad drivers are released.
In driver download form choose;
- Satellite
- Satellite L series
- Satellite L550
- All (short model)
- All (operating system)
- Touchpad driver
Then you will get all drivers for touchpad.
PS: be sure that the touchpad settigns are configured in control panel -> mouse -> device settigns

Satellite A200-226: I can't find my touchpad drivers

Hi,
I have a Toshiba A200-226, and I've been using Windows 7 professional for a while, but I've formated the PC and now I can't find my touchpad drivers...
It has dual mode, so the synaptics web site drivers are not complete, can someone help me on this?
Regards

hi,
you can check it on the Toshiba driver page:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
if you don't find win 7, try vista's one. Note, satellite a200 drivers are placed in *archive* in +family+ section

Unable to hear sond.... Hp envy beta, windows 8

Dear, HP support
                      From last few weeks, I am facing a problem, I am unable to hear the sound, once I open the laptop, I can hear the sound for few minutes after that their is no sound, I am using (hp envy beta) window 8.
kindly suggest, I would be Thankful to you, for your generous support.
                                                                               Syed Tariq Hussaini.
This question was solved.
View Solution.

Hi,
Try the following.
Open windows Control Panel, open Windows Update, select 'View update history' in the left hand pane and then select 'Installed updates' link in the following window.
Locate update KB2962407, right click it and select Uninstall. When done, restart the notebook and when Windows has reloaded, open windows Control Panel, open Windows Update and select 'Check for updates'. You'll see the update you just uninstalled being offered again - right click and select 'Hide Update'.
After this you may or may not need to delete and reload the Audio driver - if you do, the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How do I get into the BIOS on my HP Envy running Windows 8.1 to enable Hyper-V

How do I get into the BIOS on my HP Envy running Windows 8.1 to enable Hyper-V
This question was solved.
View Solution.

Rob, welcome to the forum.
During boot you should continually tap the Esc key to enter the BIOS. I am not certain that you will find Hyper-V as an option in the BIOS. Most of HP's BIOS'es are kept very simple with only the necessary settings.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

HP Envy 5530 & Windows 8.1 : Does not print the whole document

Hello, I cannot seem to print an entire document longer than 3 pages with the HP Envy series & Windows 8.1 from any of my programs. It will stop after a handful of pages (randomized with which page it stops at), with a simple error message, "Could not print document." This goes for double sided as well as single sided pages. It doesn't matter if it is color or b/w. I first had the Envy 4500 and did everything I could to fix the issue. I uninstalled/reinstalled the drivers using both CD and online installers and ran the HP Print and Scan Doctor, which could not find any issues. The Network Configuration page & Test print pages were also fine. I tried printing immediately & printing once everything has spooled. Nothing worked. I finally gave up and upgraded to the 5530 in hopes that it was an incompatible driver. However, I am still having the same issues, despite the "all clear" from the Print & Scan Doctor. Please help!-ebdsnyder

Hi there, The only thing I can recommend at the moment would be to setup another instance of the network printer. Firstly I would recommnd setting up the printer with a Fixed IP address as if the IP address were to change later the printer would stop working. Then go into the Control Panel (use Windows Key and X and choose Control Panel from the menu that appears) and choose Devices and Printers. Click in the printers area and choose Add Printer. When the next screen comes up the computer, the system will search the local network and display any printers that are found on the network. Choose the Envy 5530 and click next The computer will then add a network port and ask you to choose the driver. Choose use driver that is currently installed. The computer will then ask you to Name the printer, choose a descriptive name that will help you identify it later. The computer will then ask you if you want to share the printer, I would recommnd not sharing it for now. The computer will then ask if you want to set this as the default printer, this choice is up to you. Click print a test page to check that the printer works and then click finish. After this you will have an extra printer icon for your device. I would recommend going into the Printer Properties on this new device and change the printer driver to the one that does not have the words Class driver after it (The Class driver is a cut down in OS version of the complete driver). This can be done from the Printer Properties advanced tab. I hope this all makes sense. Good luck and if you have any question please post them back here and I will try and help you out.

How can I activate my HP TrueVision webcam (HP Envy dv7; Windows 8)

I'm really losing my patience here. My laptop is brand new. I remember the first time I started it I clicked on CyberLink YouCam and the camera worked. I even took a picture with it.
Since then I am trying to activate the webcam and it is not working. I wanted to Videochat on Skype but the webcam was not activated so there was no webcam option.
I read that if you go on Facebook and click on "Change Profile Picture" and then "Take Picture" it activates the webcam, but not in my case.
When I start CyberLink YouCam it says that there was no webcam found and if I have to activate it if I have one.
So here is my question: How do I activate the webcam? Please, just give me the instructions on how that works. What button combination I have to press or whatever.
I have the HP Envy dv7-7202eg with Windows 8. Bought and used in Austria, if that information makes a difference :-)
This question was solved.
View Solution.

If the webcam worked before, it may be "stuck". If that is the case, then a Reset may kick it all free and you will be "back in business" in a couple of minutes. If the Reset does not fix it, there are a few more options. Stop when it works.
At the bottom is a Help Guide that goes over the testing and options that you have available from the software side to help you solve the problem.
This is a brand new system; if all else fails, please do call HP and ask for help! Just because the webcam worked before does not mean it works now. These little webcams are delicate and they can break - the wires are tiny and they can be crushed, bent, or broken at any time. If the stubborn webcam won't work, Call HP and ask for help. Something may have been missed or the little beast may be broken!
Contact HP
Try this simple Reset:
Notebooks- Forced Reset to Resolve Hardware and Software Issues- Sealed Non-Removable Battery
OR
Notebooks - Use Hard Reset to Resolve Hardware and Software Issues - Removable Battery
=====================================================================================
Is your Driver Installed?
sp59986 Cyberlink YouCam
NOTE the name and the location - the *.exe file will likely save to "Downloads “
Install the Software / Driver installation package: If you have ‘Admin’ control, you may highlight the package(s) and “double-click” to install, else Right-Click, Select ‘run as Administrator’ and install.
=====================================================================================
If the Reset and the Driver Installation do not bring Joy:
Close all your applications and Shut down the notebook
Press the Power key and as the notebook is starting, Tap away on the ESC key to get into the Start Menu
Select F10 to enter the BIOS Menu
Press F5 to load the Defauls (might be F9 - see the bottom of the page for the correct key)
Using the ARROW keys to navigate, Select YES and hit ENTER
Let the system completely load (boot up), and log in
Start Screen > Desktop > Windows key + X > Device Manager
Check the Device Manager for the HP TrueVision Webcam device
====================================================================================
BIOS Update
You can check to make sure your BIOS is updated to the latest version. If needed, and you decide to do so, you can opt to update the BIOS.
HP ENVY dv7-7202eg Notebook PC Drivers & Downloads
When updating the BIOS:
Disconnect all USB drives
Always run in AC power
Do not touch the system while the update is in progress
Optional: leave wireless button ON, but turn off the router (to make sure there are no interruptions)
====================================================================================
The "All Things Webcam" for Windows 8:
HP Notebook, TouchSmart, and AiO PCs - Webcam Troubleshooting (Windows 8)
Good Luck!
Kind Regards,
Dragon-Fur

Adding Windows 7 x64 drivers to Windows Server 2003 printserver

Hello,
I've recently added a HP Elitebook 8530W running Windows 7 64 bit, to a network containing only 32 bit systems.
It's all working fine except I cannot get the printer, a HP Laserjet 4345MX, shared via a HP ML350 server running Windows Server 2003 SP2, working on it.
I have downloaded the appropriate Windows 7 x64 drivers from the HP website (the PCL6 v5.2 package) and tried adding these on the server (through printer properties, sharing, additional drivers, under the x64 box), but it is refusing to accept these drivers (I've tried every .inf in the package).
If anyone could offer any advice on how to get this setup working that'd be great, thanks
Marijn

Hello,
I've recently added a HP Elitebook 8530W running Windows 7 64 bit, to a network containing only 32 bit systems.
It's all working fine except I cannot get the printer, a HP Laserjet 4345MX, shared via a HP ML350 server running Windows Server 2003 SP2, working on it.
I have downloaded the appropriate Windows 7 x64 drivers from the HP website (the PCL6 v5.2 package) and tried adding these on the server (through printer properties, sharing, additional drivers, under the x64 box), but it is refusing to accept these drivers (I've tried every .inf in the package).
If anyone could offer any advice on how to get this setup working that'd be great, thanks
Marijn

Windows 8 64bit drivers msi GX600 aka msi-163A

After so many long hours searching for, trying and reinstalling Windows 8 Pro 64Bit I finally found all Windows 8 64Bit drivers for msi GX600 aka msi-163A.
As this is old model and do not have official support I decided to share driver links to help everybody else.
My system is: msi GX600-PX from 2008 turbo version aka msi-163A with following spec:
BIOS: v1.12
Motherboard: Intel PM965
CPU: Core 2 Duo T8100 (Penryn)
GPU: Nvidia Geforce 8600M GT
Memory: 4GB DDR2 (upgrade from 3GB DDR2)
Drivers:
Agere Modem
Description N/A Version 2.2.98.0 Type Modem Release Date 2010-07-01
OS Win7 64
Download md_agere_2.2.98_al00.zip (http://www.msi.com/service/download/nbdriver-15441.html) File Size 1.45 MB
msi Bluetooth_6837D
Description N/A Version 7.10.01 Type Bluetooth Release Date 2010-05-19
OS Win7 64
Download bt_6837d_7.10.01_w700.zip (http://www.msi.com/service/download/nbdriver-15384.html) File Size 73.52 MB
System Control Manager (SCM)
Description System Control Manager
Version 2.209.1106.005.10 Type Utility Release Date 2009-11-23
OS Win7 64, Win7 32, XP 32
Download scm_vx7_nb.zip (http://www.msi.com/service/download/utility-11559.html) File Size 5.41 MB
ENE CIR Driver
Description ENE CIR Driver Version 3.1 Type Driver Release Date 2009-11-04 OS Win7 64, Win7 32
Download 6657_enecir_release_v3_1_win7.zip (http://www.msi.com/service/download/driver-11779.html) File Size 0.75 MB
RICOH Card Reader
Description RICOH Card Reader Version 3.62.02 Type Card Reader Release Date 2009-07-10
OS Win7 64, Win7 32
Download http://dlsvr04.asus.com/pub/ASUS/nb/Drivers/Cardreader/CardReader_Ricoh_WIN7_32_WIN7_64_36202.zip File Size 4.10 MB
Nvidia GPU 8600M GT
Description GPU Driver Version 257.41 Type Microsoft WHQL Driver Release Date 07/12/2010, 8.17.12.5741
OS Windows Vista / Windows 7 x86 (32-bit)
Download http://download.windowsupdate.com/msdownload/update/driver/drvs/2010/07/20367486_2b4825f23573cc5aa3f88e4709b610e39f8283f0.cab File Size 125 MB
Windows Vista / Windows 7 x64 (64-bit)
Download http://download.windowsupdate.com/msdownload/update/driver/drvs/2010/07/20367487_ec2b1ff7583e06ca7fe70161c0ad9be0e549583f.cab File Size 170 MB
Courtesy of user: justinkw1 from guru3d forum http://forums.guru3d.com/showthread.php?t=325912
Realtek LAN
Description LAN driver Version 8.003.0730 Type LAN Release Date 01/07/2012
OS Win 8 64bit, Win 8 32bit
Download http://www.realtek.cz/realtek-download.php?realtek=RTL8168C_8111C&system=8 File size 5.58 MB
Realtek HD Audio ALC888
Description Audio Type Driver Release Date 14/01/2013
OS Win 8 64bit, Win 8 32bit
Download http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22412&lang=eng&OSVersion=Windows%208%2C%2064-bit*&DownloadType=Drivers File Size 136.21 MB
Intel Chipset
Description Device Software Version 9.3.0.1026 Realise Date 02/11/2012
OS Win 8 64bit, Win 8 32bit
Download http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20775&keyword=Intel+Device+Software&lang=eng File Size 4.73 MB
Intel PRO/Wireless 3945ABG
Description Wireless Internet Connection Version 15.3.1 Realise date 15/11/2012
OS Win7 64bit, Win7 32bit
Download http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22116&lang=eng&OSVersion=Windows%207%20(64-bit)*&DownloadType=Software%20Applications
Next post: Knowing Issues

Knowing issues:
1. Hips of NVidia drivers having issues with brightness or not recognising all graphic cards.
I found that only above mention version working with this laptop / graphic card. I had tried few versions from 178 to 306.97, regular, with WHQL and with moded inf and neither worked.
With generic basic adapter brightness and turning off screen by system working flawless, but you have just basic 2D functions. When you install version 257.41 driver working properly, you get all options and brightness working. However, diming and turning off screen by system not working.
Simple fix is to disable 'Generic PnP Monitor' in Device Manager. With this fix you are getting automatic turning off monitor by system, but losing brightness adjustment option.
My preferred option is with disabled 'Generic PnP Monitor'. Before disabling I had setup brightness for all power options to suit my needs and then I disabled 'Generic PnP Monitor'.
If I need to change brightness it is enough to enable 'Generic PnP Monitor' in Device Manager.
2. Turbo button and all function keys working correctly with and without installed SCM, except for brightness if you have disabled 'Generic PnP Monitor'.
3. If you decide not to install SCM as I, than you can use application 'KeyTweak' to assign any action to 'P1' button.

Windows 8.1 drivers for dv6-6053ea

At the moment i am using windows 7 and the drivers i need are only from HP which are from 2011 only for windows 7. So i was wondering can i find drivers for windows 8.1 and will they work? The main problem is graphics driver.. i can only use the one HP has made and when i download a driver from AMD site i can't install it. So i was thinking maybe when i install windows 8.1 i can find a newer driver that works.
This question was solved.
View Solution.

HP does not have Windows 8.1 drivers posted for your model but we can find drivers for you and yes, you will be able to use AMD drivers from their site for the video.

Bootcamp Windows 7 (64) Drivers

After 2 days of struggling to find the right way to install Window 7's drivers properly I'm out of ideas. I've installed Windows 7 now twice with no issue, it just seems I can't get a single driver to work for me. I'll list the specs of my computer and then list what I've done in order to see what else we can do.
Late 2012 MacBook Pro 13-Inch
OSX V. 10.8.2 (Mountain Lion)
2.5 Intel i5
4 GB DDR 3
And what I've done
1. BCA Windows Support Software download to CD/DVD or Drive (multiple times) with NO luck. My error message reads "Can't install Windows Support Software" every. single. time.
2. Tried an original retail download of Snow Leopard on Windows 7. This got me the furtherest, as it installed Boot Camp 3.1 but nothing else. While the installation lead me to believe it installed all the necessary drivers, Device manager tells me differently. No drivers were installed, regardless of what the install setup bars may have stated.
3. Pulled various different Bootcamp Update Patches from the downloads section in hopes something might give. Trying 2.0, 3.1, 3.2, 3.3, and 4.0, I still have had no success. Most of these attempts consisted of "corrupt file" errors or "This is just a patch install, not the full blow support software" message. 2.0 and 3.1 did install, however no drivers installed during setup or manually.
4. Frustrated at the fact not one driver installed, I'd hope to find an up to date Broadcom network driver to install some where online. After digging through forums, I found one. Downloaded the most up to date driver, (I took 2 other broadcom drivers below it just in case), installed the driver, and proceeded to verify. The driver did install correctly this time around yet once my password for my network went through I was prompted with a message stating "Windows can not connect to the network". After reading MORE forums, I was lead to believe this might be the wrong driver.
So how is I actually get the right driver? or the right support software for that matter? I'm truly exhausted after working on this for 10+ for 2 days straight, hoping to have this up and running so I can get back to work. At this point, I'd take a simple ethernet driver so that I can hardwire into the comp for the moment in hopes that Windows Update will pull the drivers through.
Thanks in advanced

Read and follow the Bootcamp Installation Manual. It is the first option when you run Bootcamp Assistant. After downloading and saving the Windows Support Software as described in the installation manual you run the support software from within Windows.
You should visit the Bootcamp forum https://discussions.apple.com/community/windows_software/boot_camp

I always receive receive a message onscreen Error in C\WINDOWS\SYSTEM32\SPOOL\DRIVERS\W32X86\3\DLCFtime.dll have to click on run. Would like missing entry permanently installed on computer file

I always receive a message onscreen Error in C\WINDOWS\SYSTEM32\SPOOL\DRIVERS\W32X86\3\DLCFtime.dll
Missing entry: Run DLL entry
I then click onto the run box below the message and then can access my homepage by double clicking on the Mozilla icon.
Can anybody tell me how to get the missing entry permanently into my programme files?

Probably problem with Dell printer,DLCFtime.dll is part of Dell printer driver software, maybe you must update the driver or re-install the software, read here for more information:
http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/missing-entry-run-dll-entry/dd6f8f71-ad23-4eff-8a9d-ac8b86d9a199
http://support.euro.dell.com/support/topics/global.aspx/support/kcs/document?c=uk&l=en&s=gen&docid=DSN_28E393B4B4A5ADEEE040A68F5B2849AA&isLegacy=true
http://www.tek-tips.com/viewthread.cfm?qid=1396261
http://forums.majorgeeks.com/showthread.php?t=229356
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Envy 13 Windows 8 Touchpad drivers

Similar Messages

Maybe you are looking for