Envy 15t-J100 Problem connecting second monitor

Hi!
So I have that problem that I want to know if someone ever had or have the answer for.
Each time I plug a second monitor using an HDMI cable, in order to get it to work I need to go to the device manager, disable and enable the Intel HD 4600 driver.
It's was OK when I used to connect the second monitor once in a while.. but now I use it on daily bases and each time it goes to sleep mode I need to do the disable/enable thing again.
Please let me know if you have any solution,
Thank you,
Ron.

@Berkomb ,
Hello and thank you for posting on the HP support forums. This issue may be due to a possible update from Microsoft. If an updated driver has been loaded that is not from the HP support site it may cause a change in functionality.
You may want to try a system restore back before you noticed the problem.
HP PCs - Using Microsoft System Restore (Windows 8)
Here is another link that may help you as well.
HP Notebook PCs - Troubleshooting HDMI Display and Sound Issues
Please let me know how things go.
Thanks again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Similar Messages

CAN HP Envy 15t j100 Support 2 external monitors?

Hi, I'm trying to figure out how to connect 2 external Dell monitors with HDMI inputs, to my Envy 15t j100. The evy has only 1 HDMI out port. The Envy also has 4 USB 3.0 ports. Ideally, I would like the option to use all 3 displays (The Envy's and the 2 externals.) But would be satisfied with just the 2 externals, extended 1 to the other, for desktop work. Any ideas? Is this possible?

Hi,
Unfortunately you can't use one HDMI port to connect to two monitor even with a HDMI spliter. You need a small investment to buy a piece of hardware and you can setup like:
Actually Dell monitor is the one on the left hand side. Two external monitors are all FHD. Please watch the following video:
https://www.youtube.com/watch?v=WzEMhRoCl_U
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Video freezes on my Envy 15t-j100 (E1P04AV)

I bought this back in December 2013. Back then, the video would freeze permanently until I closed the the window and reopened the video. An updated video driver came out which helped a bit with the problem. The computer now freezes for a few seconds and then continues. Still annoying and shouldn't happen. Any thoughts?
Computer: HP Envy 15t-j100 (E1P04AV)
Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz
System Board: 1962 KBC Version 93.51
System BIOS: F.56
Windows version: 8.1 64-bit
Intel HD Graphics 4600
Driver: 9/9/2013
Version: 10.18.10.3304
Thanks!

Hi,
Well, going back over your last 2 posts. Everything you mention points to a conflict between Firefox and Adobe's Flash. It's no secret that Firefox v. 31.0 has and is having a lot of problems. You can find this all over the web in a google search. As you've narrowed down the issue, the only suggest I have is checking out the Firefox forums(http://forums.mozillazine.org/viewforum.php?f=38) or Adobe's(https://forums.adobe.com/community/flashplayer). Maybe one of the two have a work-a-round or fix.
You did make note that you thought IE was having an issue, this seems to have just "fixed" itself with flash. If you reinstalled or updated flash, that could have been the trick.
If the issue occurs again from multiple sources, please let me know.
I worked on behalf of HP.

Boot from mSATA drive on HP ENVY 15t-j100

I purchased an HP ENVY 15t-j100 with a 1TB drive and 16GB RAM. There is an avaialble mSATA slot in the user area so I purchased a CRUCIAL 240Gb mSATA drive with the intention of installing the WIN 8.1 OS and my programs on the solid state drive and use the slor (5400) hard drive for data.
I used the Recovery drive I created to get the OS on the mSATA - no problem.
It even boots up - but when I install the hard direve the system tries to boot from the spining drive - the BIOS shows that the Hard dirve is "in" Port 0 and the mSATA is Port 1 and there does not seem to be any what to change this so, after all the work and research it dies not seem like I can utilize the mSATA slot on this notebook.
Any ideas would be greatly apprecaited.

HLubert wrote:
I purchased an HP ENVY 15t-j100 with a 1TB drive and 16GB RAM. There is an avaialble mSATA slot in the user area so I purchased a CRUCIAL 240Gb mSATA drive with the intention of installing the WIN 8.1 OS and my programs on the solid state drive and use the slor (5400) hard drive for data.
I used the Recovery drive I created to get the OS on the mSATA - no problem.
It even boots up - but when I install the hard direve the system tries to boot from the spining drive - the BIOS shows that the Hard dirve is "in" Port 0 and the mSATA is Port 1 and there does not seem to be any what to change this so, after all the work and research it dies not seem like I can utilize the mSATA slot on this notebook.
Any ideas would be greatly apprecaited.
I have solved it by installing a third party bootloader on the main hard drive. The hard drive must be connected via USB to a computer (even the same laptop with the mSATA in as I did). I have used Bootice to install a bootloader called Plop .
http://www.pendriveapps.com/bootice-partition-flash-drive-edit-boot-sector/
Then put the hard drive back in and set the mSATA in Plop as the boot drive. Here is some info:
http://www.plop.at/en/bootmanager/thebootmanager.html#b4
I couldn't make it work but then I went to "Profiles" - "Linked partitions", picked the right partition, confirmed it and it worked. However, I don't have the laptop anymore and can't say exactly what to do.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

HP Envy 15t-J100 Nvidia Graphics card issue.

Hello, I recently bought a HP Envy 15t-j100. I was under the impression that it came with a NVIDIA Geforce GT 740m graphics driver ( even has the sticker on the laptop) and a HP Intel HD 4600 driver. However when I went to device manager and looked at the display drivers, the Nvidia driver was not there. The only driver that was there was the Intel HD one. I then decided to go to the nvidia website and download the latest driver, but that didn't work because it told me it couldn't continue due to imcompatibility. I'm confused, I have the sticker that tells me that I "have" the nvidia geforce graphics card, but in device manager I don't see it. Help!

Hi,
The Envy 15t-jxxx series is a set of CTO machines. What is the model/product of your computer ? Please use the following instructions for find out the model/product of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
You can't see something like the following image ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

WLAN for HP ENVY 15t-j100 Quad Edition Notebook PC

I just purchased a HP ENVY 15t-j100 Quad Edition Notebook PC with Windows 7 (February 2014).
It comes with 802.11bgn 1×1 WLAN module, which is not satisfactory so I would like to upgrade the WLAN to an Intel 7260ac.
According to the user manual, the following two parts are the only WLAN whitelisted by the BIOS:
#1:
Intel Dual Band Wireless-AC 3160 802.11 ac 1×1 WiFi + Bluetooth 4.0 Combo Adapter
Spare part number = 710662-001
#2:
Intel Dual Band Wireless 7260 802.11 bgn 2×2 WiFi + Bluetooth 4.0 Combo Adapter
Spare part number = 717384-001
I cannot find any of these models anywhere! I do find a 710661-001 on Amazon (which would be great if the BIOS accepts it! and good price too at about $35).
Could someone tell me if I can put this WLAN card (710661-001 on Amazon) or where to buy the HP approved #1 and/or #2 card listed above?
Thank you!

Hi Arnaud_, welcome to the HP Forums. Unfortunately if the parts are not in the user manual I cannot guarantee they will work. You can try to buy it from HP PartSurfer.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Help me recovery HP Envy 15t-j100 plz

Hi,I'm in a big trouble after reinstalling window 8.1 . My laptop hasn't worked lately And then , I can't log in my laptop . I try to recovery but i have trouble with it I can't choose option " Minimized Image Recovery " and " System Recovery " I just can choose option " Microsoft System Restore " and I have no restore points to restore Are there any ways to fix this problem ? Plz help me to solve it . Thank you so much

Hi @yousof ,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you accidentally spilled water on the notebook and need to replace the hard drive due to this. You did not create your recovery CDs.
I know you stated you cannot order online as you are not currently in the states.
You did not state which exact model of ENVY TouchSmart 15t-j100 you have so I just chose one.
Here is a link to Order software and driver media. If as you state you are unable to order, because you are out of the United States here are two options for you to consider.
If you know someone in the United States that could order it for you and then have it shipped to you or call HP support to inquire about obtaining the recovery USB.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap .
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Trouble connecting second monitor (MBP late 2011)

Hi guys! I'm Nico and as you can see from the title i'm having problems connecting a second monitor to my macbook pro late 2011.
I have a mini display port to hdmi adapter that works perfectly fine (I use it with my HDTV), and because I also have an Asus external 22" monitor I bought a hdmi/vga cable
(http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=171010746825#ht_2700wt_1144)
so I could use my mini display port to hdmi adapter without buying another adapter.
This is what I do:
1- connect the vga cable to the Asus monitor
2- connect the other end of the cable (hdmi) to the mini display port to hdmi adapter
3- connect the mini display port to hdmi adapter to my macbook pro
But nothing works! My Mac is plugged to the power as well. I've tried to check in the monitor setting but nothing shows up, and even doing "detect display" still nothing works.
I've also tried to reset the pram. But without luck.
Any suggestions?
Thanks,
Nico

Any idea guys?

Problems with second monitor

Hi all,
I have a MBP described bellow, and I have a problem, started after I changed the background image (I don't know if its had to do) to change each 15 minutes.
After this change, the second monitor started to be scratched, unreadable and freezing my MBP. Only solution was disconnect the mini port and force shutdown the machine. I tried this actions some times, but now, MBP doesn't recognize mini port any more. What might be happening?
OSX 10.9.5
2.5 GHz Intel Core i5
4 GB 1600 MHz DDR3
Intel HD Graphics 4000 1024 MB
Mini DisplayPort to DVI Adapter
Dell LCD monitor 22"
Thanks in advance.
Fabiano Oliveira

Hi Civolis,
Welcome to the Apple Support Communities!
I understand that you are having issues with video and connection to a second display for use with your MacBook Pro. In this situation, I would recommend working through the troubleshooting steps in the attached article to help resolve your issue.
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Best regards,
Joe

Questions about connecting second monitor to HP 610-1015xt TouchSmart AIO

Hi,
I have a HP 610-1015xt touchsmart PC with AMD Radeon HD5570. Now I've gone through all the similar questions on this forum and I still had a couple of my own or needed some more calarity on some.
I've read time and again that one should use the second monitor in "clone" mode istead of "extended" mode because TouchSmart software is not compatilable with exteded mode. Now does that simply mean that my PC may show erratice behavior if I try to use touch features while in extended mode and second monitor connected? Because if that's the only issue, I can live with it as I don't use touch features at all. Also, will dsiabling touch help in any way?
Is anyone here using a second monitor in extended mode on a touchsmart? Have you guys faced any issues?
Also, what I'm trying to find out is if things will run smooth if I connect a HP 32" Quad HD monitor with 2560 x 1440 resolution? I have found a adapater called Plugable USB 3.0 to HDMI adapter which supports 2560 x 1440, I'm just trying to figure out if my PC will be able to hadle it? If anyone has any knowledge on this, please do share. Because if I can't get the full resolution, I will just settle for a full HD screen.
People, please do share your experinece or suggestions. Any help will be greatly appreciated.
Thank you,
Jay

Jay, I own a notebook without touch but a monitor with touch. I use my monitor as extended monitor. The touch works fine on the extended monitor and works without touch on the notebook screen. I do not face any issues in using this way. Depending on my need, it switch my primary display to the extended touch monitor or notebook screen. Whether it is the primary display or not, when in extended mode, the touch works fine on my monitor.
Regarding the other question on Quad monitors, my knowledge is limited. Sorry for not being able to answer that part of the question.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Where Are the Drivers? Envy 15t-J100 Touchsmart

If I do a search for drivers for my laptop it shows nothing. HP ENVY TouchSmart 15t-j100 Quad Edition Is this normal? Does HP sometimes take down divers for a computer? About the only thing I can think of why they don't have anything up is because of Windows 8.1??

It certainly doesn't look as if HP follows thru because there are still no drivers posted as of July 2015. I too am looking for the drivers to my laptop. Are they trying to force me to pay for support?Paul_Tikkanen wrote:
Hi: I have reported the issue to HP. There is a support and driver page, and a drop down menu to select W8.1 but there are no drivers listed, just a link to order a recovery disk. http://h10025.www1.hp.com/ewfrf/wc/product?product=6521367&lc=en&cc=us&dlc=en&task=

Problems connecting 1 monitor and 1 TV to 2gb DDR3 AMD Radeon 7570 video card.

I recently purchased an Hp h8-1360t computer with a 2gb DDR3 AMD Radeon 7570 video card and an Hp 2711 LED monitor. I am having problems connecting both the monitor (dvi) and a 50" Sony LCD TV (hdmi) with a 50' hdmi cable. When starting the computer, once the initial Win 7 boot up is finished, the monitor screen goes blank, except for the mouse pointer. When I turn on the tv and select the correct input source a normal Win 7 screen with icons appears on the tv. Only the wallpaper picture displays on the monitor and no icons. If play a dvd movie it will only show up on the tv with the sound coming from the speakers attached to the computer.
I would like to retain control of the computer using the monitor. I tried to set the monitor up as the primary display source using the monitor configuration menu,but it won't allow me to save the dvi connection as the primary display source. The documentation that came with the computer and what I was able to find on the Hp site is lacking....to say the least.
Any assistance with this problem will be greatly appreciated.
Thanks,
Tony

First I would disconnect the TV HDMI cable from the computer. That should return the PC screen to normal. May have to reboot to get normal. Then reconnect the TV HDMI and go into the screen setup routine, paying attention to which screen is supposed to display what information.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Problems connecting to Monitor after waking up MacBook from sleep

Hi,
I am experiencing a lot of problems connecting my macbook pro to external monitor once I put it to sleep. I have tried every options like setting up PRAM and all, but it just wont work. Sometimes the restart works and sometimes it wont. I am using a Samsung monitor. I have no idea what to do, as I keep on clicking Detect displays and it just wont do anything. Can anybody please help me as to how I can wake up my macbook from sleep and get it connected to the monitor. I have a mac keyboard and bluetooth mouse, but neither would wake the mac. I have change my bluetooth settings so that the mouse should be able to wake it up..

William Rivas wrote:
William Rivas wrote:
William Rivas wrote:
Linc Davis wrote:
Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. Repair permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reset the System Management Controller.
9. Reset the PRAM.
10. Reinstall OS X.
Updating to 10.9.2 did the trick. So I thought. Does anyone have a solution?
Thanks!

MSI Gt70 dominator pro connecting second monitor questions

I have the new dominator pro, when I plug in my monitor (23" asus ips) it automatically runs off my gtx gpu. Light turns on, heats up (not hot but not idle). Is there any way to change this to run off intel? I'm not doing anything at all that would require descrite power, right now im just trying to have vevo on monitor for my son to watch videos while I work on my laptop screen.
I know with my asus g750 laptops it was always defaulted to intel gpu when connecting second screen.

Quote from: Dblkk;108055
Yea, I tried that. That's how I always set up multi monitor (then I have the extend/clone/ect options. But when I did that, the resolution was horrible, the picture was a good 4 inches from each side (left/right) and all the way top to bottom. All settings were full screen, regular resolution, eveyhing exactly the way it runs on my other machines. Just total crap on my msi, and NVidia graphics were still on.
I searched all settings and everything looks legit, but NVidia graphics are in charge. Maybe that's just the design of the msi, whenever a second screen is used, it just defaults (without user control) to NVidia. Maybe bios or something hidden?
Not a huge issue, just wasn't sure if it was a common msi thing with an easy fix or not.
I forgot to ask something as well. How is the monitor connected? HDMI? DVI? DP? Maybe a diferent cable might change the result? I'll try the monitor thing on my demo unit when I'm back at Memory Express on Sunday and update.

Problem Connecting Two Monitors

Just set up a new HP Mini 300-30 with two monitors. Monitor connection is through a device I bought that has HDMI cable connecting to back of HP Mini and two outlets on device to connect two monitors using VGA cables that came with each monitor. Monitors work but are set up with mirror image and I have not been able to find a way to make each monitor run indpendently. If I use keyboard and press Windows key + P it brings up a screen where I can select monitor options. I select the option to run separate monitors but nothing happens. I believe I have tried everything but the correct way.

Hello @RedWingFan,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your desktop computer is not able to display two independent images, and I would be happy to assist you in this matter!
To ensure your displays are configured correctly, I recommend following the steps in this document on Using Two or More Monitors with One Computer (Windows 8).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Envy 15t-J100 Problem connecting second monitor

Similar Messages

Maybe you are looking for