Envy 17-j070ca Case separating at left hinge

I have had this laptop for approximately a year now, and noticed a while ago that the left hinge seemed to be sitting a bit lower than the right hinge when the laptop is open.  Not too long after, the issue got worse and more obvious as the case now separates whenever the hinge is used. The case closes up again once the laptop is shut.  I have noticed that some of the plastic inside has broken and screws have come loose, as I can occasionally hear fragments being tossed around by the fan.  Some small screws and small pieces of plastic have even fallen out of the side of the laptop by turning it on its side while the casing is separated.  This makes me wish I hadn't strayed from Lenovo's laptops...
Would HP be able to fix/replace this for me?  How long would it take?  How much would it cost, if anything?
Thanks!

@Sean139 ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Thank you for visiting the HP Support Forum.
I work for HP. However I speak only for myself, not for HP nor anyone else

Similar Messages

  • Sleekbook (envy) left hinge broken

    I simply opened my laptop, envy series sleekbook and found that left hinge is broken and online research I have done that shows this problem is faced by many other users of envy series . Certainly it's a design flaw .
    My laptop is still in warranty. Please let me know will it be covered in warranty ? Otherwise how much will I have to pay?

    Hi:
    This is a consumer to consumer forum, so no one here can speak on behalf of HP regarding what is or what is not covered under the warranty.
    Please contact HP technical support for the country you live in at the link below to find out the information you are looking for.
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  • Dv7 Left hinge pulling case apart? What the heck!

    I have a dv7 that is very rarely used (I think I purchased it in 2012).  I noticed recently that my hinges are making a lot of noise/struggling.
    Tonight I realized that the left hinge is completely busted and pulling the casing apart.  The laptop is clearly out of warranty, so I'm guessing I have no recourse.  I came upon another thread on this forum where HP was fixing the problem on other dv7's, but I'm not sure if those people were still in warranty or not.
    Any help or advice?
    Thanks!

    I'm having the exact same problem with mine! Same model, Envy DV7-7227CL. I've seen a lot of the forum posts about Envys in general having this issue. I've only had mine for 14 months, and it's been a stationary laptop to replace my desktop (also an HP). It's really upsetting that all you have to do is open and close the screen regularly for this to happen.
    Mine hasn't broken away yet, but once I realized the case was starting to pull apart, I applied some eletricians tape to the area and stopped adjusting or moving the screen. Has HP offered you any solutions on repairs out of warranty? I'm pretty pissed that I'll have to spend money to fix what is obviously a manufacturer's defect, but I need my laptop to be able to open and close.

  • HP Envy m6-1090ee (Left Hinge damaged)

    Hi
    I had purchased a HP Envy m6-1090ee model laptop at Dubai on July 2012. The laptop looked really good, with attractive price. I purchased the laptop and started to have problems since day one.
    1. Excessive heat generation- since the air vents are the bottom face of the laptop and there is no way the hot air can vent out. I am expecting the laptop to have internal damages over a period of time. 
    2. The left hinge connecting the screen and the keypad, has been  damaged. I am guessing this damage has been caused due to the excessive heat generation. Usally the left side of the laptop heats up much more than the right side. This has resulted in the outside of the screen face to open up while opening and closing the laptop. Thus exposing the internal components to further damage and heat. 
    My warranty has expired. HP has to do something about this, for its customer. Since I have seen similar complaints about this product. 
    Thank you
    Alex Robert

    Dear Advance 23.  I received an email to my personal address which told me that you had sent a private message on the HP Forum related to my Envy Sleekbook problem.  Actually, the "problem posting" you referenced was not my posting, although my problem was similar.  HP has taken care of my "seized hinge" problem to my total satisfaction.  I have not figured out how to go to my original posting so that I can mark it "Solved".  I have never understood how message boards work, so I am not surprised that I cannot find my original posting.  I am not sure that HP will take care of everyone with broken hinges in the same way they took care of me because I bought my laptop directly from HP, and it had been used very little with respect to opening and closing the hinges.  In any case, I am totally satisfied with the response I got from HP in resolving my issue.

  • HP 17 Notebook left hinge case area puling apart.

    The case corner near my laptop's left hinge is pulling apart and i'm wondering what the solution is.

    Have you checked to see if the little screw is in place on the bottom near the corner?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • My HP envy ultrabook left hinge broke and now my screen wont light up

    So I have had this computer for a little over a year and a half and about 2 months ago my left hinge broke. I was out of the country studying abroad so there wasn't much I could do about it. After I got home I didnt have the time nor the money to fix it so I was just carefully opening and closing it. Well today when I opened it, the screen wouldn't light up. I really need to get it fixed fast because I am a full time college student and my classes depend on having a computer. What can I do? Oh I should say, it is not under the warranty anymore.Help please? 

    Hi HP + all, I am currently in a similar situation. The bottom left part of the frame (very close to the left hinge) is detached from the screen, making it difficult to open and close the laptop. I have had this problem at least two (most three) times in the past year and each time have sent it to HP for repair while having the one-year waranty. It appears to be an issue of faulty glue, but if left untreated, the opening and closing gets more difficult (even while I hold the frame and screen together while performing such actions) and the left hinge will start creaking. My warranty is expired and the additional repair period that HP gives after a repair (30 days? 90 days? I forgot) is over. My last repair was in late 2013 or early 2014. I do not carry my latop by the frame at all, and I treat the Ultrabook with care (gently placing on table when using after first frame separation). I no longer close it at all and only use it on my home desk. It's very frustrating to repeatedly have the same issue, very frustrating that I can't take it to public places without risking something, and it also makes me unhappy since each cycle of sending the laptop over and waiting for it to come back takes away a week or more of work. Can someone please address this? I am nearing my wit's end with this repeated issue. Thanks.

  • Left hinge broken on ENVY m6

    My left hinge is falling apart. It's been weak since I got it repaired within warranty when I bought it. When I bought it, part of the screen didn't work and I think when it was repaired some damage was done to the back of the screen (the metal on the lid was pretty bent out of shape) and its gotten too bad to deal with now.

    
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar

  • Pvilion G6 broken Left hinge

    Hi,
    Left hinge of my pavilion g6 has broken.  I have found  many cases on the Internet (some of them are on consumer forum websites and some are on this HP support forum web site) which have explained the same broken hinge problem(G6 left hinge). So,  Has there been any fixes? 

    @Rohith050 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Broken left hinge

    I have an HP envy that i bought in march of 2014 and the left hinge has broken!! it has never been dropped or slammed shut or anything that would normally break a hinge. i have no idea where to get a replacement hinge or to take the computer for it to be fixed.  i dont want the problem to get worse of for it to crack my touchscreen. suggestions??

    Hi @hannahos ,
    I have sent you a private message. If you are not sure how to check your private messages then this post has instructions that will guide you through the process.
    Thanks for visiting the HP Support Forum
    I work for HP. However I speak only for myself, not for HP nor anyone else

  • Broken left hinge on Spectre XT Ultrabook

    I'm now one of the many HP users with a Spectre XT Ultrabook with a broken left hinge. Like most others in this forum, the laptop has been has never been carefully used and looked after but since the defect occurred out of warrantly HP won't offer support or replacement. Given the large number of people with this exact problem, it's CLEARLY a design nd/or manufacturing defect, so what are our options? Repair? Replacement? I desperately need this laptop for work...

    Hello HarleyGuy06,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message after the weekend from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details)
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    I work for HP

  • Pavilion G7 2054A left hinge broken require guidance on how to send back to HP

    Re: Envy m7 Notebook with a Broken Hinge
    Options
    ‎09-08-2014 11:58 PM
    Hi Jeff or anyone from HP support I have  A pavilion G7 2054 SA  (UK model ) which has a broken left hinge can some one please help me as to how to  return to Hp as my laptop is still under warranty. please see below:- 
    HP product warranty results
    The following information was returned for your product
    Serial number  [edited Serial Number by Moderator] Product number b3r83ea Warranty status Covered under warranty Warranty end date 2014-10-07 (YYYY-MM-DD)
    Reply

    Hi @polemanone ,
    I have sent you a private message. If you are not sure how to check your private message then this post has instructions that will guide you through the process.
    Regards,
    George
    I work for HP

  • Hp pavilion g7-2240us left hinge repair

    hp pavilion g7-2240us left hinge repair. second time this broke in less than 2 month. Why is there no recall and how can I fix it myself to save some money.

    @ededededed 
    Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Windows 7 64 bit drivers for HP ENVY 17-J070CA

    Hi, 
    Can anyone please help  me with  the drivers Windows 7 (64 bit) for my new Hp Envy 17-J070CA laptop. i would really appreciate.
    thank you !!!
    This question was solved.
    View Solution.

    Hi,
    Intel Chipset Installation Utility
    http://ftp.hp.com/pub/softpaq/sp66501-67000/sp66901.exe
    Intel Video HD
    http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70455.exe
    NVIDIA GeForce GT 740M
    http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64966.exe
    Intel My WiFi and Wireless Drivers for Microsoft Windows 7
    http://ftp.hp.com/pub/softpaq/sp65001-65500/sp65170.exe
    Intel Bluetooth Driver
    http://ftp.hp.com/pub/softpaq/sp65501-66000/sp65750.exe
    Intel Management Engine Components Driver
    http://ftp.hp.com/pub/softpaq/sp67001-67500/sp67047.exe
    Realtek Ethernet Controller Drivers
    http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63213.exe
    Intel USB 3.0 Driver
    http://ftp.hp.com/pub/softpaq/sp61501-62000/sp61820.exe
    IDT High Definition (HD) Audio Driver
    http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63940.exe
    Synaptics TouchPad Driver
    http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64284.exe
    Realtek PCIe Media Card Reader Driver
    http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63708.exe
    HP 3D DriveGuard 6
    http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63563.exe

  • X121E Left hinge is broken

    Hello. The left hinge of my laptop was broken after less than 100 open / close cycles. Service center says it's not a warranty issue, but if judge by google search it is a design flaw, because every next user has the same problem. Please advise where should I sent a complaint?

    Hi, nebucad_nezzard
    When it comes to International Warranty Service, Lenovo has this tool right here that will tell you if service is available in a country. It will also tell you what kind of service you can receive in said country. Put in your machine type and see what you can do!
    Best, 
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Macbook pro left-hinge gap!!

    Is it normal for most macbook pros to have a slight gap on the left- hinge between the black part and silver. The right side is fine and the hinge is continuous with the aluminum body whereas the left side hinge is not. Also, I have noticed when picking up my macbook an occaisonal pop or click noise coming from the bottom. Any help or suggestions would be most appreciated!! (P.S. I have only had my 13 inch macbook pro for nearly 2 weeks)
    Not Normal Left-Side Hinge (Gap)
    Normal Right Side Hinge (no gap)

    Hi Jordan,
    I have a late 2008 Macbook Pro and it arrived with the exact same condition as yours.
    Truth is I took no notice with it, guess it was probably just my piece that was like that.
    After a couple of months, the hinge, the black part started to move about, sideways. It could move due to the gap that was already present. The creaking hinge sound you hear, yes that's an indication of the problem. Its not the hard drive shutting down at all.
    A year and a half later, the screen begin to peel away from the unibody surface, the metal surface that hold the screen together. It all happened and started from the left side. Closing the lid now showed a significant gap on the left side near the hinge.
    2 years and 10 months after I got my Macbook Pro, the hinge has snapped. The screen has peeled signifcantly away from the unibody surface on the left side and now my right side is also affected.
    I can only use my Macbook Pro with the wall supporting my screen now.
    I implore you to return your Macbook, accept no flaws with the hinges at all.
    Email me at [email protected] if you like to know more, or want to see pictures even.

Maybe you are looking for

  • Using a subreport to list values from the data in the main report

    Post Author: GarrettFitzgerald CA Forum: Crystal Reports I have a list of new patients, showing what insurance class they fall under. I'm summarizing the classes into 4 groups using a SQL Expression.I would like to put a subreport in the header showi

  • How to pass a value to a filter prompt based on a value list?

    I have a query that has a filter prompt that is based on a value list. I want to call this query from another query as a drill down. So I build the URL to call the query and pass the value for the filter prompts as URL parameters. For the filter prom

  • Xml shred using java

    How can I execute this command: shred sample_db products.dad products.xml In my application I am connecting to db2 using the jcc/jdbc driver..so I want be able to connect to the database and then call a method for example: insertXmlFile(String dadFil

  • User defined column heading

    Hello Every1, The following is a peice of code produces a report. At the moment the heading of the column is GBCCCL15/16_CSAHEPA because it has been hard coded that way. However what i would like instead, is the heading of the column to be what ever

  • When doing the tutorial in photoshop touch to merge pictures where is select button???

    when doing tutorial in photoshop touch merging 2 pics they say select remove button where is it pse??