Envy 4 Ultrabook lid split and hinge out of place

Hi, I have a HP Envy 4 Ultrabook which I bought a while ago - hasn't been a year yet. It has been perfectly fine but today when I opened up my screen I heard a snapping or clicking noise and saw that my left hinge was slightly bent and out of place, the side of the lid had split a little and there is a small opening between the display screen and the bezel cover. It doesnt seem like a really big thing but closing my lid is quite risky and when I do the split becomes wider; and I'm afraid that my laptop my be damaged even more. I would appricate any kind of help and also if anyone knows if this is possible to fix on my own or if I'd have to get it fixed and roughly how much it would be. Cheers!

I understand that the hinge and lid cracked a little when it was opened.
Did it open normally when this happened or did it feel like it needed a little more pressure to open than normal?
If it's less than a year, have you tried contacting HP? They may or may not cover it depending on the scenario, but it may be worth looking into.
What is the product number?
NOTE: Do NOT provide the serial number.

Similar Messages

Wallpaper and dock out of place on screen

iMac 27". The Wallpaper is stuck in only the top right 1/3 of the screen, with the rest of the screen grey. And my dock is floating in the middle of the screen. Everything still works but it is simply all out of proportion and in the wrong place. The desktop files are still in the appropriate places and are the correct ratio and size.
I've tried restarting, played with all of the screen,wallpaper,dock settings. Nothing seems to work. This problem started after trying to use Airplay a couple weeks ago.

Hi there.
I've got the same problem. It appears to be a 'Dock' issue. I've worked around it by issuing a command to re-start the Dock, and that seems to work... See my post here:
https://discussions.apple.com/message/26090676#26090676
Hope that helps.
D.

Envy m6 1125dx - lid cracking and splitting apart

I have an m6 that is otherwise perfectly functional. A few months back, the lid started making interesting noises when opening and closing. Upon closer inspection I see that the lid is cracking and the aluminum plate on the outside of the lid has started to bow out.
Any suggestions on how to proceed? I'm being very careful about how I open and close the lid but I get the feeling that it will completely break apart in the not-too-distant future.
Thanks,
Michael

@paccko137
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

MSI GX 720 Lid and Hinges

Can anyone suggest how to get MSI GX 720 Lid and Hinges replacement parts as the original ones are broken.
Tried to send message to MSI online support, almost a week, no reply at all.
Grateful for your kind support. Thx

Can anyone suggest how to get MSI GX 720 Lid and Hinges replacement parts as the original ones are broken.
Tried to send message to MSI online support, almost a week, no reply at all.
Grateful for your kind support. Thx

HP G70-105ea screen housing and hinge replacement required!

Could anyone suggest where I might be able to find a replacement housing for the screen and new hinges?
I foolishly tried taking it apart before and the whole thing just split and will not go back together.

Try ebay or www.DiscountedLaptopparts.com. I've had very good luck with replacement parts for my machine. HP ENVY DV7-7230us notebook PC

Purchased music saga across multiple devices!! Oh and greyed out iTunes tracks!!

Ok, this has been bugging me for a while now! This post spans many common questions regarding the iTunes store, purchased music held within iCloud and how that purchased music relates to multiple iOS devices. I cannot work out how this is all supposed to fit together and I honestly believe there is some fundamental issues with either my account or the system as a whole. To explain I am going to use my iPhone 6 and my iPad Air 2nd generation to show you the current situation.
Ok, below is my iTunes store music purchases, as viewed in iTunes on my Mac Mini. 31 albums in total, some may not be full albums as it may have been a single that I bought from an album.
Ok, both my iPhone and iPad are set to "Manually manage music and videos" in iTunes and all music has been deleted from them both via Settings > General > Usage > Manage Storage. There is ZERO music held on either device, neither manually moved there from iTunes or downloaded to the devices from my purchases in the cloud (the 31 albums above).
Ok, within Settings > Music on both devices, "Show All Music" is off. This should mean that if I go into the Music app on both devices, my device should show no content. My understanding is correct about this yes? Here is the result on each device.
iPad: This is to be expected
iPhone: Something is wrong here (8 albums showing in total)
None of the above can be swiped left to delete and all play while in airplane mode so they ARE stored locally! They may have been synced to the iPhone in the past via iTunes, however now they should not be there.
The questions here: Why are they on my iPhone? Why has the first album been split (if I add it manually to my iPad using iTunes then it goes on as one album)?
More importantly, how do I get rid of them? They don't show as present in iTunes when connected, they don't show in "Manage Storage" and I can't swipe left to delete.
Moving on! I will now turn on "Show All Music" on my iPad. I expect now to see all music purchased from the iTunes store, i.e. the 31 album's.
Nope! I now see 29 albums and 1 of those will be the split album so 28 in total. Where is the other 3 shown in iTunes purchases? Hang on, see below the first album? Professor Green! I bought that from iTunes come to think of it but it doesn't show as one of my 31 albums! The same can be said for the other 21 albums that now appear! 8 that seem to be stuck and 21 more when "Show All Music" is turned on. The 31 albums showing in my iTunes as purchases are nowhere to be seen!!
Also worth noting is that Cream Club Anthems 2012 is also split into 2 albums on my iPad displaying whats in iCloud so not just on the music that seems to be stuck on my iPhone. Sigh!
Ok, on my iPhone, when I turn on "Show All Music" i get the exact same 29 albums as shown above on my iPad.
So 2 issues based on this! My purchases in the cloud are not complete and have split one album, this is proved by my iPad showing no content when "Show All Music" is turned off. Second is that when I turn that setting off on my iPhone, I am left with albums on my device, despite all music being deleted and one of the "sticky" albums is split into 2 albums.
I will throw this one in too. "Show All Music" set to off and all music deleted by iTunes and swiping left on my iPhone. Connect to iTunes and have a look what is on my device! What the **** is all this crap? Can't be deleted and definitely not present on the device!
Not good enough Apple. I have seen multiple threads with people asking questions relating to all the above and no one has given a comprehensive answer as to why this happens! I use Apple products exclusively now as everything is supposed to fit together seemlessly. As you can see from above, it just doesn't!

I am assuming someone at Apple has seen this as today all my music shows with "Show All Music" selected. However, the split album is still split and when I turn off the aforementioned setting the 8 albums still show.
It's reminding me of the old Windows Media Player days!

Unicode export:Table-splitting and package splitting

Hi SAP experts,
I know there are lot of forums related to this topic, but I have some new questions and hence posting a new thread.
We are in the process of doing unicode conversion in our landscape(CRM 7.0 system based on NW 7.01) and we are running on AIX 6.1 and DB2 9.5. The database size is around 1.5 TB and hence, we want to go in for optimization for export and import in order to reduce the downtime.As a part of the process, we have tried to do table-splitting and parallel export-import to reduce the downtime.
However, we are having some doubts whether this table-splitting has actually worked in our scenario,as the export has exeucted for nearly 28 hours.
The steps followed by us :
1.) Doing the export preparation using SAPINST
2.) Doing table splitting preparation, by creating a table input file having entries in the format <tablename>%<No.of splits>.Also, we have used the latest R3ta file and the dbdb6slib.o(belonging to version 7.20 even though our system is on 7.01) using SAPINST.
3.) Starting with the export using SAPINST.
some observations and questions:
1.) After completion of tablesplitting preparation, there were .WHR files that were generated for each of the tables in DATA directory of export location. However, how many .WHR files should be created and on what basis are they created?
2.) I will take an example of a table PRCD_CLUST(cluster table) in our environment, which we had split. We had 29 *.WHR files that were created for this particular table. The number of splits given for this table was 36 and the table size is around 72 GB.Also, we noticed that the first 28 .WHR files for this table, had lots of records but the last 29th .WHR file, had only 1 record. But we also noticed that, the packages/splits for the 1st 28 splits were created quite fast but the last one,29th one took a long time(serveral hours) to get completed.Also,lots of packages were generated(around 56) of size 1 GB each for this 29th split. Also, there was only one R3load which was running for this 29th split, and was generating packages one by one.
3.) Also,Our question here is that is there any thumb rule for deciding on the number of splits for a table.Also, during the export, are there any things that need to be specified, while giving the inputs when we use table splitting,in the screen?
4.) Also, what exactly is the difference between table-splitting and package-splitting? Are they both effective together?
If you have any questions and or need any clarifications and further inputs, please let me know.
It would be great, if we could get any insights on this whole procedure, as we know a lot of things are taken care by SAPINST itself in the background, but we just want to be certain that we have done the right thing and this is the way it should work.
Regards,
Santosh Bhat

Hi,
First of all please ignore my very first response ... i have accidentally posted a response to some other thread...sorry for that
Now coming you your questions...
> 1.) Can package splitting and table-splitting be used together? If yes or no, what exactly is the procedure to be followed. As I observed that, the packages also have entries of the tables that we decided to split. So, does package splitting or table-splitting override the other, and only one of the two can be effective at a time?
Package splitting and table splitting works together, because both serve a different purpose
My way of doing is ...
When i do package split i choose packageLimit 1000 and also split out the tables (which i selected for table split) into seperate package (one package per table). I do it because that helps me to track those table.
Once the above is done i follow it up with the R3ta and wheresplitter for those tables.
Followed by manual migration monitor to do export/import , as mentioned in the previous reply above you need to ensure you sequenced you package properly ... large tables are exported first , use sections in the package list file , etc
> 2.) If you are well versed with table splitting procedure, could you describe maybe in brief the exact procedure?
Well i would say run R3ta (it will create multiple select queries) followed by wheresplitter (which will just split each of the select into multiple WHR files) ...
Best would go thought some document on table spliting and let me know if you have specific query. Dont miss the role of hints file.
> 3.) Also, I have mentioned about the version of R3ta and library file in my original post. Is this likely to be an issue?Also, is there a thumb rule to decide on the no.of splits for a table.
Rule is use executable of the kernel version supported by your system version. I am not well versed with 7.01 and 7.2 support ... to give you an example i should not use 700 R3ta on 640 system , although it works.
>1.) After completion of tablesplitting preparation, there were .WHR files that were generated for each of the tables in DATA directory of export location. However, how many .WHR files should be created and on what basis are they created?
If you ask for 10 split .... you will get 10 splits or in some case 11 also, the reason might be the field it is using to split the table (the where clause). But not 100% sure about it.
> 2) I will take an example of a table PRCD_CLUST(cluster table) in our environment, which we had split. We had 29 *.WHR files that were created for this particular table. The number of splits given for this table was 36 and the table size is around 72 GB.Also, we noticed that the first 28 .WHR files for this table, had lots of records but the last 29th .WHR file, had only 1 record. But we also noticed that, the packages/splits for the 1st 28 splits were created quite fast but the last one,29th one took a long time(serveral hours) to get completed.Also,lots of packages were generated(around 56) of size 1 GB each for this 29th plit. Also, there was only one R3load which was running for this 29th split, and was generating packages one by one.
Not sure why you got 29 split when you asked for 36, one reason might be the field (key) used for split didn't have more than 28 unique records. I dont know how is PRCD_CLUST split , you need to check the hints file for "key". One example can be suppose my table is split using company code, i have 10 company codes so even if i ask for 20 splits i will get only 10 splits (WHR's).
Yes the 29th file will always have less records, if you open the 29th WHR you will see that it has the "greater than clause". The 1st and the last WHR file has the "less than" and "greater than" clause , kind of a safety which allows you to prepare for the split even before you have downtime has started. This 2 WHR's ensures that no record gets missed, though you might have prepared your WHR files week before the actual migration.
> 3) Also,Our question here is that is there any thumb rule for deciding on the number of splits for a table.Also, during the export, are there any things that need to be specified, while giving the inputs when we use table splitting,in the screen?
Not aware any thumb rule. First iteration you might choose something like 10 for 50 GB , 20 for 100 GB. If any of the tables overshoots the window. They you can give a try by increase or decrease the number of splits for the table. For me couple of times the total export/import time have improved by reducing the splits of some tables (i suppose i was oversplitting those tables).
Regards,
Neel
Edited by: Neelabha Banerjee on Nov 30, 2011 11:12 PM

In workflow need to check in passed validaitons and check out failed once?

Hi All,
Can any one let me know is the following requirement possible?
In workflow can I able to split records based on validation result? I need to check in passed validations and check out failed validations..
Regards
Rajeev

Hi Rajeev,
You can try out both branch step and validation step and see which serves your purpose better.
In branch step you can give multiple validation/validation groups,if result is TRUE take the first branch and check in at STOP.
If FALSE,take dont checkin at STOP,either cascade or Rollback as the case be.Also here you can call the same or other Workflow.The split branches can later be combined using MERGE or Group.
Other way can be by using Validation step,setup iteration threshold.here failed jobs will be sent to previous step and passed ones will move ahead in WF.Later you can checkin at STOP and failed jobs would still be in WF in checkout state.
For your reference :
http://213.41.80.15/SAP_ELearning/OKEC/nav/content/011000358700000601512007E.PDF
http://help.sap.com/saphelp_mdm550/helpdata/en/43/e0615a82b40a2ee10000000a11466f/frameset.htm
Thanks,
Ravi

Ease In and Ease Out

Is there a way to change the speed or duration of the "ease in" and "ease out" options in regards to motion effects?

Click the twirly triangle next to the keyframe stopwatch of the property you want to change. The speed/velocity graph will appear. You'll see handles attached to each keyframe, and you can drag these to alter the ramping. Hold down the Control key to split the handles.
Like this:

Splitting and grouping of data from incoming string

Hello,
I have a package of data coming from the serial port and read out as a string.
The package has the following format, to be short.
1. opening characters
2. 2 bytes for Group ID(identify the device# the data comes from).
3. Sensors data belongs to device# (1 byte each)
-data of sensor #1
-data of sensor #2
-data of sensor #3
-data of sensor #4
and loop back to sensor 1,2,3,4 for 20 bytes total.
I have eliminated the opening characters with the replace substring with empty string. For the Group ID, I used a case structure to identify which device it is. For the sensor data, I need to split them up and group all the data of the sensors together. I tried using substring for each sensor in a for loop that loop 5 times to group the data of each sensor together but it only give me the very last values.
My goal is to be able to extract and group the 5 bytes of each sensor together everytime the serial package comes in and then save them to a separte files for each sensor. I also want to be able to plot the data of each sensor as they come in with respect to time.
Any idea on how I can accomplish the grouping of data described above? I really appreciate your prompt response. Thanks,

Since you already know how to separate the sting containing the sensors data, you just have to use a string to byte function and to decimate the resulting array, as shown in the attached vi.
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Sensor data.vi ‏39 KB

Device that can split HDMI video out

I'm starting here before i might get sold something that won't work...
Am running a late-2012 i7 2.3 quad Mini in a studio. I (will) have two matching Acer 24" LED
monitors that need to display the same screen simultaneously- the 2nd monitor in an adjacent room.
I was going to use Thunderbolt/MiniDisplayPort>DVI for that monitor but the Mini is maxed out - every
port is being used for something and i need the TBolt for an audio device. Hence am considering
splitting the video out. Question - will a passive "Y" type splitter work and does it put any extra drain
on the Mini in a way that might 'tax' it too much -- or is there a powered device that would be better
suited for this task and if so, any suggestions of a model or two that are known to be reliable?
Also, would a passive splitter make the display on either of the monitors dimmer ? I seem to recall
somebody saying they had an issue where one or the other was less bright when using a splitter(?)
Thanks for any info you might have! Much appreciated!
Mike

Hi Gary, thanks for your reply. My question then would be, of the fairly inexpensive 'active' devices pointed out in the comparison review mentioned earlier - i.e. http://hdmi-switcher-review.toptenreviews.com/
I wonder why any of those wouldn't serve my purposes fine - that is, a switcher. Or alternately, perhaps there would be cheaper active VGA (vs DVI) splitters for something in the realm of less than $100 that would do the trick. For our needs,even if i needed to run VGA (which both monitors are capable of) it wouldn't be such a critical application that this would be a major factor - vs. the DVI.. I would just be going HDMI>VGA split box>two monitors
I just recalled using a passive VGA splitter cable a couple of years ago on an old Mini now that i think about it - the resolutions matched on the two identical monitors - and both did display without distortion in that case.
Even though i believe there was a bit of a dimming effect on both, it wasn't so extreme that they weren't acceptable. Still, i would buy an active powered splitter - just wonder if i wouldn't be fine to go with something in the under-100.00 set of options shown in the 'reviews' link and if not, what the problem could be. THanks!
Mike

Output from dbms_output.put_line splits and move to next line

Hi All,
I am printing out a list using dbms_output.put_line its like
One or more of following Required Parameters are missing:
1. Primary Field
2. Structure Field
3. Structure
Table
4. List File Name
5. Query Directory
6. Query String
but I don't know why third option is splitting and moving to second line. any idea? its not that long even then.
thanks

set linesize 150
or set it as per your requirement

Using split and regex

I have a string like this:
String parseMe = "//element//elementAgain/elementSecond"
I want to get the string between // and /. How can I do that using split and regex? I'm confused on how will i construct my regex expression. can anyone help me or show me how? thanks!

        String parseMe = "//element//elementAgain/elementSecond";
        Pattern p = Pattern.compile("//(.*?)(?=/)");
        for(Matcher m = p.matcher(parseMe); m.find(); System.out.println(m.group(1)));

Envy 100 410A Web Services and Ipod problems

Hi,
I purchased the Envy 410A and I'm having a few problems. I have two Macbooks and a 4th gen Ipod Touch setup on a wireless network with a Linksys WRT100 router. First, what's working:
I successfully installed the printer on both computers through USB and I can print wirelessly from each without any difficulties. (I set a fixed IP address for the printer to avoid having to 'find' it each time it got a new address by DHCP.)
Here are my problems:
1) On setup, the printer successfully connected to the HP web service and printed out a code for ePrinting. I entered this code and was able to print via email. However, sometime between last night and today (and after I installed 6 updates) the printer reported that it no longer had an email address. I turned off Web Services to troubleshoot, but now when I try to enable it I get the "Problem Connecting to the Web Services Server" error. Powercycling the router and/or printer does not fix this. Nor does turning off the printer's wireless functions for 5 minutes. I've tried restoring factory defaults, but it did not actually restore anything. How can I fix this? Is the server down, or is something screwed up?
2) My iPod Touch is completely updated to iOS 4.2, bluetooth is turned off, and I've verified that it's on the same network as the printer, but I cannot detect the printer on my iPod either through Apple's AirPrint or through the HP iPhoto App 3.0. Both just say "No printers found". This is really frustrating since I bought this with printing from mobile devices in mind. Any advice?
Thanks for your help,
Dave

I am glad your first problem is resolved. When it comes to iPod having OS 4.2, the device supports AirPrint which is new from Apple.
For more information on how to use the AirPrint on your iPod refer to below link:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c02623193
If the iPod still does not find the printer, try unchecking the option "Enable Multicast Streams" in the router EWS page and see if it works or not. Contact your router support for more info.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Screen doesn't come back after lid closing and open

Hi all,
I just replaced LCD screen from my old cracked one on my T61 7658-CTO.
There was no backlight, no indicator lights except WAN.
I tried another inverter, but same symptoms.
So, I tried another video cable, but same symptoms.
Then, I put the cracked one back in, but still same symptoms.
I can't figure out what's gone wrong.
I tried several other things and found out that
if I connect the video cable to the inverter in a half way from the left, then the screen works!
However, if I close the lid and open again, the screen doesn't come back.
And while screen works, if I power the laptop off and turn on again, the screen works fine.
So, I'm thinking there's something wrong with lid switch.
Correct me if I'm wrong.
I've seen a few people having same problem on this forum,
but nobody has an answer to this yet.
Please help me!

Nobody?
Could it be a damaged mobo or lid sensor? Or even some kind of fuse on mobo that people talk about?
It's really weird that lcd works perfectly with the inverter board only halfway connected to the vga cable.
If I push it fully for full connection, the screen goes dark; no backlight.
If I pull it out halfway from the right, then the screen come back and works very fine until I close the lid and open again.
Indicator LEDs never work except the WIFI one.

Envy 4 Ultrabook lid split and hinge out of place

Similar Messages

Maybe you are looking for