Envy 4500 Corrupted Driver Download

It took 2 hours to "download" the driver to my new laptop (from the suggested url in the paperwork). Then, it said the file was corrupted. I used the disc and installed on my desk computer. Can I copy it to my laptop? If so, how?

Hello Karen53,
Welcome back to the HP Support Forums!
I see that you are trying to scan with the ENVY 4501 to your Chromebook, but can not find any software to install. You can not find any software because there is none, scanning is not something easily done on a Chromebook.
What you will need to do is; Gather the printer's IP address (pressing the wireless icon) and then enter that IP into the address bar of the browser (both printer and Chromebook need to be on the same network).
From here (the Embedded Web Server), you can select scan and scan images as .jpgs.
I hope this helps,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Envy 4500 mac driver

I just bought the ENVY 4500. I have an older MacMini and it is using operating system 10.5.8. This printers drivers are for Mac OS 10.6 and newer. Is there any way I can get this printer to work on Mac OS 10.5.8.?????
For some reason my MacMini craps out when I try to install Mac OS 10.6. So, that isn't an option..
Please let me know if you have any solutions.
Thank you
Mcsamp

Hi MarkES,
From what I can find, it seems to me that the issue is stemming from a setting within the Mac not an issue with the HP software. I suggest trying the following steps:
Open Utility > Disk utility > Preferences. Uncheck "Verify Checksums". Then try installing the software again.
Please let me know if this resolves the issue, thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Envy 4500 e software download

I recently purchased HP Envy 4501 e printer. I set it up for wireless printing with no problem. When I try to scan a doc, I get the message, "Computer not found". I cannot use the cd to install softward on my Chromebook 11, so how do I download the software to the Chromebook? I cannot find it on HP website.

Hello Karen53,
Welcome back to the HP Support Forums!
I see that you are trying to scan with the ENVY 4501 to your Chromebook, but can not find any software to install. You can not find any software because there is none, scanning is not something easily done on a Chromebook.
What you will need to do is; Gather the printer's IP address (pressing the wireless icon) and then enter that IP into the address bar of the browser (both printer and Chromebook need to be on the same network).
From here (the Embedded Web Server), you can select scan and scan images as .jpgs.
I hope this helps,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Envy 4500 won't print from computer

Hi,
My HP Envy 4500 has been working perfectly for quite some time now. Unfortunately, it has stopped printing from my Dell laptop, running Windows7. It scans to the laptop just fine. It copies fine, and it prints from my iPhone fine.
I have looked at a ton of posts and tried many things:
*uninstall/reinstall wirelessly (at least 8 times) -- via the https://123.hpconnected.com/activate/woobe/ENVY4500 site
*uninstall/reinstall via USB
*ran print/scan doctor utility (or whatever it is called) and been told everything looks fine
*sending a test page via one of HP's tool is fine, however, printing the internal test page via the HP tool fails
I am losing my mind and would really appreciate some help.
Thank you!

Hello @JNZM,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the issue that you're experiencing when trying to print from your Windows 7 computer to your HP ENVY 4500 e-All-in-One Printer. Thank you for including all of the troubleshooting steps you have completed prior to reaching out for support. At this time I will be running you through some troubleshooting steps to check the actual print system on your computer. The Print Spooler is what controls printing from Windows computers. It is built into the Operating System. If the Print Spooler is experiencing issues than you will experience printing conflicts. Should the Print Spooler be experiencing a conflict, the software and scanning feature for the printer will not be affected. Can I please have you follow the steps below.
Step 1: Check Print Spooler:
Click on your Start menu
In the 'search programs and files' box located right above Start type services.msc and hit enter on your keyboard
When the Services window opens scroll down until you see Print Spooler
Click on Print Spooler once just to highlight it
If you see Start in the top left hand corner than that indicates that your Print Spooler is in fact Stopped (not good). But we will leave this for now.
If you see Stop or Restart in the top left hand corner than this indicates that your Print Spooler is actually Started. Please click on Stop to temporarily Stop the service.
Minimize this window as we will need to come back here
Step 2: Check Spooler Folder:
Click on your Start menu
Select Computer
In the Computer window select your C Drive
Click on Windows
Click System32
Click Spool
Click PRINTERS. You may get a permissions warning, just Continue past this.
The PRINTERS folder should be empty. If there is any files in here they are corrupted print jobs. Right click on anything in this folder and 'delete' the files.
Close the PRINTERS folder
Step 3: Start Spooler:
Reopen the Services window we previously minimized
Click on Print Spooler again to highlight it
Click on Start in the top left corner
If you get an error message please take note of it
If the Print Spooler starts successfully you will see 'Stop and Restart' as your options in the top left
Once the Print Spooler has started please test printing again. If printing fails, or if the Print Spooler fails to start, please proceed to the next step.
Step 4: Run Microsoft Fixit:
I'm going to have you run a Microsoft Print Fixit Tool to identify and correct any print system issues or Registry corruptions on the computer.
Please click here to access the Microsoft Fixit website
Once the page opens under section (2) select Print, fax, scan, share or save.
Under section (3) select Run Now for Diagnose and fix printer and printing problems automatically
Once the download is complete please follow the onscreen instructions to run the Microsoft Tool
Once the Fix has run, please test printing again.
Please respond to this post with the result of your troubleshooting. You can also say 'thanks' for responding by clicking the 'thumbs up' icon below. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Unable to connect wifi printer Envy 4500 - Unable to print test page and windows office file

Scan doctor suggest the software installation.
The HP software don't completed the connection of the printer.
I tried to connec the printer from the control panel and the printer is now connected: i cannot print from microsoft office file or from the test page of the printer, but i can print from acrobat or any other program.
Help me please.
Thk
ps: i have tried to reinstall software without Antivirus and with the fierewall in off but nothing change. I have already tried to remove hp software and reinstall driver but nothing change.

Hello @Emilio66,
Welcome to the HP Support Forums!
I understand that you're experiencing issues when trying to print from Microsoft Office and Test Pages from your Windows 8.1 computer to your HP ENVY 4500 e-All-in-One Printer. However, you are able to print from all other programs from your computer to your printer. I would like to assist you today with resolving this printing issue.
Recently Microsoft has released a Hot Fix to correct 'Offline' or 'Partial Printing' issues within their latest Windows 8 and Windows 8.1 Operating Systems as they recognize this as an issue within their Operating System. The issue occurs when you have a networked printer and a corruption with the WSD (network) port on the Windows Operating System. This issue appears to affect a variety of networked makes and models of printers. Therefore, I am going to have you run the Hot Fix to correct the network printing issue. Please click here to install the Hot Fix. Once the website opens select the button for Hotfix Download Available. Please follow any onscreen prompts to install the fix. Once the fix is installed you should have no issues printing to your printer.
If the printing issue persists, can I please have you click here to download and run the HP Print and Scan Doctor Tool. This Tool will run on your computer and 'fix printing' issues for you. Should any driver, software, or connection conflicts be found than the HP Print and Scan Doctor Tool will attempt to resolve those conflicts for you. Once the Tool has completed please test printing again.
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Envy 4500 will not scan to Mac

HP Envy 4500 will not scan to MAC. Printing works just fine but when I try to scan the printer says scanning but never completes the scan, there is no error message. I tried uninstall and reinstall of the software, upgraded to Mac OS Yosemite and tried re-install again, no luck.

Hi @eallen1219
From your description, it soudns like we may be haivng a osftware issue. Let's use the following steps to remove currenlty installed software, clean up the Mac, and reinstall the software again;
Scrub/ Uninstall
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
* Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
Click uninstall.
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. > HP-ENVY-4500-series_v12.34.0.dmg
When you add the printer, please ensure you are using the HP driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
Please let me know if you can scan now. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Can no longer scan with the HP Envy 4500

I can no longer scan documents with the HP Envy 4500. When I try to scan it times out and I receive the following error message:
"Scanner communiocation cannot be established. Ensure your product is powered on, check the connection, and ensure your network is functioning properly. If these conditions are correct, restart the product and try scanning again." I use a wireles connection to the HP Envy 4500 and it is working fine as I can print documents with no issues. I ran the HP Print and Scan Doctor and it flagged the issue as a potential problem with the device driver. I uninstalled the HP software and downloaded the latest version from the HP site, installed it, and tha did not correct the problem. At this point, I am not sure what else to try and correct the problem. Any suggestion would be much appreciated.

Thanks for getting back to me
If the printer will not make copies, the unit may have a "Scanner Failure", unfortunately, and resetting the router, or computer troubleshooting would not make a difference.
You can try a power reset on the printer, to see if that will help:
Power reset the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
You can also try using a different wall outlet to see if this makes a difference.
If the problem continues, contact HP's Technical Support directly to discuss your printer replacement options, as you would require a new printer if there is a Scanner Failure.
Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Good luck to you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Unable to communicate with printer error with HP Envy 4500

Hi I am having trouble printing with my Envy 4500 printer. My computer system is Windows 8.1. I installed the driver per instruction from the website and use the usb cable to connect the printer. However when I tried to print a pdf document it says "Unable to communicate with printer" and I can't get the test page to print either. Please help! Thanks in advance!

Hi @Casey_Z , and welcome to the HP Forums!
I see you're having issues printing. I would like to help!
I'd recommend removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I'd then suggest downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Installing printer Envy 4500 on MAC OS X.10- set up bar stuck on "retrieving information"- Help!!!

I bought the HP Envy 4500 because I just upgraded my Mac to OS 10.10 and my office jet would not come along for the ride... I installed the driver from the HP website and I completed all the steps until the last step "configuation results".
The window reads "retriving information" and it has been "retrieving information" for 20 minutes. I have cancelled and gone back twice to no avail. I printed the practice page and that went fine. What can I try next?

Hi @Elizabetti,
Welcome to the HP Support Forums! I see you are trying to install your new HP Envy 4500 with your Mac running the Yosemite 10.10 Operating system. When you attempt to install the setup bar stops on 'retrieving information'. You have cancelled it 2 times with no success. I would like you to go ahead and complete the steps listed below:
Scrub/ Uninstall
• Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
• Click continue, click on one of the printers in the list.
• * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
• Click uninstall.
Reset Printing System
1. Click the Apple icon ( ), and then click System Preferences.
2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. Click on the link below to begin the download and follow the on screen instructions:
HP ENVY 4500 series Full Feature Software and Drivers
I hope this helps, please let me know the outcome!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Envy 4500 and Windows 10

When Windows 10 came out, I upgraded it. Everything worked fine except for the printer. The scanner worked fine. I called HP technical support and they could not solve the problem. Is the problem that the driver is not compatible to Windows 10? If this is the case is there any time frame on when this may be fixed. I had to revert back to Windows 7 because the printing is essential for me, and I love my envy 4500. Please let me know what you all think.

Hello , I was able to find a Windows 10 driver for your Envy 4500. You could try the download page first; HP ENVY 4500 e-All-in-One Printer series Full Feature Software and Drivers. If it doesn't work, you could try this direct download link. Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

HP Envy 4500 connection issues

Hi. My Envy 4500 all the sudden will not print, becuase a message on my mac printer icon reads, 'Printer not connected." It HAS been connected....I don't know what happened. The driver appears to be missing from my computer, too. The printer itself, which is wireless, is lit up, so it is on. Ideas? Thank you.

Hello @bogarrity, and thanks for posting on the HP Forums!
I see you're running into connectivity and software issues. I'd be happy to help!
I am posting an HP Support documents below that will show you how to find which version of the Mac operating system you are using:
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reinstalling the HP ENVY 4500 e-All-in-One Printer Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thanks again for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Envy 4500 scanner is busy

Suddenly, it is no longer possible to make a scan (or copy) on my HP Envy 4500 All-in-one.
A Windows 7 desktop, Windows 8 notebook and Android 4.4 all report errors, originating from the respective HP software/app. In addition, Windows 7 itself reports an error as well. All messages refer to the scanner being "busy" or mention another scan operation being in progress. However, no scan is taking place from any device. Initiating a scan or copy from the device itself doesn't work either.
The errors persists on both USB and Wifi connections. Printing works just fine.
I tried updating the firmware, but the updater cannot proceed because there is a "problem" with the device. HP Print and Scan Doctor fails at the second step ("Controle stuurprogramma", meaning "driver check"). Reboot does not help. Restoring factory defaults from the device's screen does not help. Resetting the device by pulling the plug while the device is powered on does not help. Reïnstalling the full driver does not help. Removing and re-adding the device to windows doesn't either.
I tried all steps on the HP support page [1,2] that Print and Scan Doctor directed me to. Did not work.
This is a refurbished Envy 4500 I got from HP because my original device was DOA (dead on arrival). I'm getting the impression the refurbished device was faulty and is faulty still.
Kindly request HP support staff to provide me with a solution.
[1] http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04092273&lc=nl&cc=nl&product=5304877&sfs=545345...
[2] English translation of [1]: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03586087&PSdrFW=MKM1FN1430ER&PSdrIssue=DriverCo...

Hello there! Welcome to the forums @dpx ,
I read your post about how you cannot make scans or even copies. First of all, thank you for your detailed post, the information really helps. Unfortunately, it sounds to be a scanner failure, as you cannot copy or scan. I have a guide that I would like to recommend for your troubleshooting and I hope it helps!
A 'Scanner Failure' Message Displays on the All-in-One Control Panel and You Cannot Scan, Copy, or F...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a terrific day and thank you for posting in the community!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Envy 4500 All in One - Printer Error - not finishing print job / non-specific error code

Help - my new HP ENVY 4500 AIO (less 3 months old) has never completed a print job if it is over 1 page. I'm connected wirelessly, and not sure if there is an interruption in the wireless connection or if this is defect in the printer. I receive a message "Printer Error - HP ENVY cancelling print job" and that's it. It will usually happen when it's on the last page of a small print job or half way thru a large (10+ page) of a print job. Any suggestions? I've downloaded HP Print/Scan Dr - it didn't find any issues.

I had the same issue. Got in contact with HP customer service and the first person that helped had no idea how to fix it. Got in contact with someone else and they found the issue right away. I had it connected through the wrong port.
First find out what the IP address of your printer is. You can do this by pressing the small wifi button on the front of your printer and it will show the IP address.
Then what you'll have to do is go to the start menu of your computer and search for "Devices and Printers".
Click that and a screen will open. Look for your printer an right click.
Click "Printer Properties" and a new screen will open.
Along the top you will see a few tabs. Click the one that says "Ports"
Click "Add Port"
Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port"
A new screen will open.
Click "Next"
Type in the IP Address of your printer and click "Next"
After that your computer should find your printer.
Click finish and you should be all set.
Hope this helps.

HP Envy 4500 all in one wont scan or copy

Hi all. I have a 4 month old Envy 4500 all in one printer & it has stopped scanning &/or copying.
It wil print from any of the laptops on the network but will not scan a document or copy either from the desktop icon or directly from the panel on the printer.
I've tried everything, uninstalling & re installing from CD rom, I've run the Scan & copy driver doctor & that says there's a problem with the driver, tells me to unplug the pirnter & restart computer, done all that & still nothing.
When you try to scan the printer draws the paper in & then the screen just sits for hours with the progress bar on "scanning" or "copying" & nothing happens. If you cancel the job (on pc or printer panel) even the "cancelling" sticks on the screen for hours, the only way to clear it is to shut down printer & restart, but still it doesnt fix it.
I think there's a fault with the arm thing that moves across the screen & copies/scans the document on the glass.
Its under warranty but I've tried everything for 3-4 days now & getting nowhere
Someone please help
BTW. My wife laptop was on windows 8.1 & I was on Windows Vista but I have just changed to new laptop in last 24hrs with also Windows 8.1 but the problem started well before I changed my laptop from Vista AND exactly the same symptoms happen from my wifes pc with Windows 8.1.

Ok thanks for all of this. I tried it all & still no joy.
I do think (as I have all along that it is a hardware fault)
I will speak to Amazon as I cannot afford to be without a printer whilst it goes off for repair
UPDATE: Amazon customer service is UNBELIEVABLE!! They're just sending a new printer out & once I get it I just need to send old one back. Love Amazon!

Problem with scanning document to searchable pdf in HP Envy 4500

I just bought HP Envy 4500 , overall good printer, but I can't find option for scanning to searchable pdf. I already updated my desktop software and printer's firmware, but still there is no option "scan to searchable pdf". Do i have to download some other software from HP?

Hello katiemac,
Welcome to the HP Support Forums!
When you are scanning with the ENVY 4500, how are you doing performing the scan? For example, if you are not using the HP software or scanning from the front panel of the printer you may not be getting all the features.
What is the Operating System installed on the computer, Windows or Mac?
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Envy 4500 Corrupted Driver Download

Similar Messages

Maybe you are looking for