Envy 7640 won't print anything except the print quality diagnostic
I'm trying to get a new Envy 7640 installed and working from my desktop running XP SP3. I have it wirelessly connected to my home network and all machines can see the printer. If I launch the HP Printer Assistant and print the quality diagnostic page, it works fine. If I try and print a test page from Windows (or print anything else), it spools for a couple seconds, then the print job disappears. My wireless laptop (MacBook Pro) can print just fine.
I've already tried the following:
Reboot the computer
Power cycle the printer
Uninstall/reinstall the print driver in Windows
Connect the printer directly to the desktop via a USB cable (same result as trying to use it networked)
Restarted the print spooler service
Disabled print spooling for the printer via the Advanced tab of the Printer Properties
Manually created my own TCP/IP port and configured the printer to use it
I'm at my wit's end here. What else can I try? Has anyone else experienced something like this?
The difference is a Windows print job goes through the spooler, and the situation you are describing, sounds very much like the spooler is corruppted or not working.
You can also try manually clean the spooler, this page may be helpful on what is the spooler and how to clean the spooler: http://www.techienewsnetwork.com/fixing-or-cleaning-the-problematic-windows-print-spooler/
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***
Similar Messages
-
HP Envy 7645 won't make copies using the printer's feed
When I place my to-be-copied paper into the feed on top of the printer, it will feed 1/2 way and say it is copying, but ulitmately it ends up with a spinning wheel on the screen until I finally have to cancel it. Then it feeds a blank page through the printer, but will not release the original and will not allow me to power down the printer. Ultimately I have to pull the plug and then turn it back on to reset. This seems to be a problem with this model. Is there something that can be done to fix it? (It will not copy at all if I place the original on the scan glass) Thank you!
I just found a post about plugging it directly into the wall outlet and it has worked twice in a row. Will call it good for now and come back if there are further problems. Thank you!
-
HPDeskjet2050All-in-One2050j510. won't print anything except location and date.
Installed my HPDeskjet2050All-in-Onej510. Worked fine until I noticed an icon on my screen and it said Dell imaging toolbox(used to have a Dell)don't have a Dell anymore so I deleted the icon. My printer hasn't printed since except to print location(I think) and date at the bottom of whatever I'm trying to print. What did I delete and can I get it back? I have emptied my wastebasket or whatever it's called. I'm not computer literate so instructions will need to be simple. Can't afford repairman. Am on fixed income.
It sounds like you need to uninstall the Dell drivers/software from your computer. Disconnect the HP printer first. Then go into the Windows control panel, then Programs/Programs and Features (depends on which version of Windows that you have) and find the Dell items listed. Now, as long as this is not a Dell computer, and you don't have any other Dell devices connected, then select all the Dell items, one at a time and select Uninstall. Once that is done, restart your computer, and perform the normal installation of the HP printer. You shouldn't see anything with the Dell imaging toolbox anymore.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you. -
Printer won't print anything from the internet
Had a hp officejet 4500 printer and now have a HP ENVY 4500 e-ALL-in-On series and neither one will print anything from the internet.
Any ideas on what to check ?????Hi dukster,
I'll see if I can find anything for you. What kind of computer and OS do you have? A Mac or a PC? Also, what browsers are you trying to print from?
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. *** -
Starting this am I cannot print anything form the internet when using Firefox as my browser. I can print Word documents and when using Safari as my browser...just not with Firefox. I have contacted Epson and it is not a printer problem. I have contacted my IP and it is not them
See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages -
My ipod classic operates normally EXCEPT the printing on the screen (i.e. the menus incl. playlistss) has disappeared. Any solutions?,
Hello engine351,
I would start with restoring your iPod classic by putting it into Disk Mode. Once you have that done, you should be able to restore your iPod in iTunes and then start the sync again. Let me know if this works out for you.
Putting iPod into Disk Mode
http://support.apple.com/en-us/HT203585
Restoring iPod to factory settings
http://support.apple.com/en-us/HT201540
Regards,
-Norm G. -
Why can't I print anything on the web?
I can print from all the software on my desktop BUT when I try to print anything off the web, nothing happens (i.e., no message appears). I have tried trouble shooting the printer but it says everything is working correctly. How do I enable the printer for internet printing?
You need the java plug-in see:
http://java.sun.com/products/plugin/index-1.4.html -
I go to print and try to select the radio button to print all frames, but It's not working
The '''Print Frames''' options are greyed out unless the web page is made with Frames. I-Frames don't work the same.
Check out this '''''frames test page''''' - http://www.draac.com/framestest.html <br />Is the '''Print Frames''' part of the print dialog box active?
As far as printing a page as you see it, many web pages use '''print.css''' files for print-media. The print.css specifies exactly what is to be sent to the printer and it can control the formatting of the printed page. -
HP LaserJet Pro MFP M127fw will not print anything except its own config
Just purchased a HP LaserJet Pro MFP M127fw. I cannot manage to get it to print using any type of connection to the printer.
I can connect to the printer from my Ubuntu PC and my Android phone, but when I attempt to print, the job just hangs, never erroring, but never completing. I have attempted printing from various applications, including a test page from the HPLIP tools, but the jobs reports "processing".
When I attempt to print an information sheet from the printer's front panel, it asks me to confirm, but then nothing happens.
I can connect to the printer's web server, but clicking on the print info button there does nothing.
I have successfully connected with HP's ePrint service using the printer's reported email address, but the service reports "problem with printer".
I don't know what else to try here.
This question was solved.
View Solution.Hi richRemer,
I see that you are having issues printing from the computer and the Android phone.
I will be happy to help you.
Power cycle the computer and the router.
I would do a power reset on the printer. With the printer still turned on, disconnect the power cable from the back of the printer. Then disconnect the power cable from the wall outlet. Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
Print a hardware self test. Find out what the IP address is.
Printing a Configuration Report.
I have provided you with the Driver Support for Linux OS.
If you are still having issues please go to Linux support page.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Hi Guys
Could anyone correct me how can I print directly to the printer from this program ,I am getting short dump error when I select the radio button printer and execute it.
Rgds
PEoops sorry here it is below
REPORT Z_ESLP_ZTCODE LINE-SIZE 132 .
*TABLES
TABLES : AGR_TCODES,
AGR_USERS,
TSTCT,
T16FW,
T16FD.
type-pools: slis. "ALV Declarations
CONSTANTS MARK VALUE 'X'.
TYPES: BEGIN OF T_DISP,
AGR_TCODES TYPE AGR_TCODES-TCODE , " Transaction code A
AGR_NAME TYPE AGR_TCODES-AGR_NAME, " Role Name B
AGR_UNAME TYPE AGR_USERS-UNAME, " Short User Name B
TTEXT TYPE TSTCT-TTEXT, " Description Name C
TEXTC TYPE USER_ADDR-NAME_TEXTC, " Long User Name
SPRSL TYPE TSTCT-SPRSL , " Language c
TEL_EXTENS TYPE USER_ADDR-TEL_EXTENS , " Extension
DEPARTMENT TYPE USER_ADDR-DEPARTMENT , " Department Name B
FRGGR TYPE T16FW-FRGGR,
FRGCO TYPE T16FD-FRGCO,
OBJID TYPE T16FW-OBJID,
FRGCT TYPE T16FD-FRGCT,
SPRAS TYPE T16FD-SPRAS,
END OF t_disp.
DATA: it_disp TYPE STANDARD TABLE OF t_disp INITIAL SIZE 0,
wa_disp TYPE t_disp.
DATA: params like pri_params,
days(1) type n value 2,
count(3) type n value 1,
valid type c.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid,
gt_events type slis_t_event,
gd_prntparams type slis_print_alv.
parameter: p_trigr type c default space.
SELECTION PARAMETER CRITERIA
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
P_TCODE FOR AGR_TCODES-TCODE , "OBLIGATORY, "no-extension no intervals,
U_NAME FOR AGR_USERS-UNAME,
R_NAME FOR AGR_USERS-AGR_NAME .
SELECTION-SCREEN END OF BLOCK BLK1.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-002.
SELECTION-SCREEN END OF BLOCK BLK2.
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK radio WITH FRAME.
PARAMETERS :
scr RADIOBUTTON GROUP rbg1 ,
Pr RADIOBUTTON GROUP rbg1 .
SELECTION-SCREEN END OF BLOCK radio.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
form build_fieldcatalog.
fieldcatalog-fieldname = 'AGR_UNAME'.
fieldcatalog-seltext_m = 'User'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'TEXTC'.
fieldcatalog-seltext_m = 'Name'.
fieldcatalog-outputlen = 60.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AGR_NAME'.
fieldcatalog-seltext_m = 'Role Name'.
fieldcatalog-outputlen = 15.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AGR_TCODES'.
fieldcatalog-seltext_m = 'Trans Code'.
fieldcatalog-col_pos = 3.
fieldcatalog-outputlen = 20.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'TTEXT'.
fieldcatalog-seltext_m = 'Description'.
fieldcatalog-outputlen = 70.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT PRINTER SETUP
PRINTER SETUP
form printer_setup.
DATA:L_PARAMS TYPE PRI_PARAMS,
L_VALID TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
IMMEDIATELY = ' '
LINE_SIZE = 220
RELEASE = 'X'
MODE = 'CURRENT'
NO_DIALOG = ' '
IMPORTING
OUT_ARCHIVE_PARAMETERS =
OUT_PARAMETERS = L_PARAMS
VALID = L_VALID
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4.
IF SY-SUBRC eq 0.
ENDIF.
"But it will take default printer from user settings
NEW-PAGE PRINT ON PARAMETERS L_PARAMS NO DIALOG.
write : 'print is on'.
NEW-PAGE PRINT OFF.
DATA: PARAMS LIKE PRI_PARAMS,
ARPARAMS LIKE ARC_PARAMS,
DAYS(1) TYPE N VALUE 2,
COUNT(3) TYPE N VALUE 1,
VALID TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION = 'LOCL'
COPIES = COUNT
LIST_NAME = 'Z_ESLP_ZTCODE'
LIST_TEXT = 'SUBMIT ... TO SAP-SPOOL'
IMMEDIATELY = 'X'
RELEASE = 'X'
NEW_LIST_ID = 'X'
EXPIRATION = DAYS
LINE_SIZE = 79
LINE_COUNT = 120
LAYOUT = 'X_44_120'
SAP_COVER_PAGE = 'X'
COVER_PAGE = 'X'
RECEIVER = 'SAP*'
DEPARTMENT = 'System'
SAP_OBJECT = 'RS'
AR_OBJECT = 'TEST'
ARCHIVE_ID = 'XX'
ARCHIVE_INFO = 'III'
ARCHIVE_TEXT = 'Description'
NO_DIALOG = ' '
IMPORTING OUT_PARAMETERS = PARAMS
OUT_ARCHIVE_PARAMETERS = ARPARAMS
VALID = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
SPOOL PARAMETERS PARAMS
ARCHIVE PARAMETERS ARPARAMS
WITHOUT SPOOL DYNPRO.
ENDIF.
endform. " BUILD_LAYOUT
*& Form BUILD_LAYOUT
Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
it_events = gt_events
is_print = gd_prntparams
i_save = 'X'
is_variant = z_template
tables
t_outtab = it_disp
exceptions
program_error = 1
others = 2.
if sy-subrc EQ 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form lfa1 table and populate itab it_lfa1
form data_retrieval.
CASE MARK.
WHEN scr.
SELECT AGR_TCODESTCODE AGR_TCODESAGR_NAME AGR_USERSUNAME TSTCTTTEXT USER_ADDR~NAME_TEXTC
INTO TABLE IT_DISP
FROM AGR_TCODES
INNER JOIN AGR_USERS
ON AGR_TCODESAGR_NAME = AGR_USERSAGR_NAME
INNER JOIN USER_ADDR
ON AGR_USERSUNAME = USER_ADDRBNAME
INNER JOIN TSTCT
ON AGR_TCODESTCODE = TSTCTTCODE
where
agr_tcodes~tcode in p_tcode
and
agr_users~uname in u_name
and
agr_tcodes~agr_name in r_name
and
TSTCT~SPRSL EQ 'E'.
WHEN pr.
perform printer_setup.
ENDCASE.
*lifnr
*between '0000100001' AND '0000150000'.
endform. " DATA_RETRIEVAL
Release memory no longer required.
free: it_lfa1 .
Form TOP-OF-PAGE *
ALV Report Header *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
wa_header type slis_listheader,
t_line like wa_header-info,
ld_lines type i,
ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'Transaction codes by User and Role Name ' .
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_disp lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Transaction Records Selected: ' ld_linesc
into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
endform.
FORM USER_COMMAND *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'TCODES'.
Read data table, using index of row user clicked on
READ TABLE it_disp INTO wa_disp INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_disp-tcode.
Sxecute transaction zven, and skip initial data entry screen
CALL TRANSACTION 'Z' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM.
*& Form BUILD_EVENTS
Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
into ls_event.
if sy-subrc = 0.
move 'END_OF_PAGE' to ls_event-form.
append ls_event to gt_events.
endif.
read table gt_events with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move 'END_OF_LIST' to ls_event-form.
append ls_event to gt_events.
endif.
endform. " BUILD_EVENTS
*& Form BUILD_PRINT_PARAMS
Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
*& Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform. -
Aperture won't print a photo wirelessly. My other programs print fine wirelessly. Anybody know why? I'm using OS X 10.6.8, Aperture 3.2.4 on an iMac with an Epson Artisan printer. When I try to print in Aperture, the printer utility tells me the printer is offline. But it isn't. I am shooting in RAW, by the way.
I don't have much, but ... make sure you are selecting the entry for the _wireless printer_. It's been some time since I did this — and a few OS's and Aperture versions ago — but I remember that there were multiple entries for my printer: USB, Ethernet, Wireless, and mounted to other computers on the network.
-
I want to buy an hp m1536 laserjet for my ipad printing, I believe the printer is not wireless but has sprint. Is the print job going through my wireless router and does that router need to support AirPrint.
The following model is airprint compatible, is this the one you have?
HP LaserJet Pro M1536dnf MFP
If not the "dnf MFP" model, then no.
The router needs to support the Bonjour protocol. If not, the airprint won't work. -
Frozen selections: I'm working from my Intel iMac trying to print (from both Aperture and Photoshop CS5) to my new Epson 4900 printer. When the Print menu comes up, under the "Basic" section of the "Printer Settings" the dropdown menus for both "Page Setup" and "Media Type" won't activate. All other options and selections work fine. Just these 2 are not functioning. What's up with that??
Here we are 15 months later and Microsoft Excel 2013 has the SAME ERROR
If one chooses:
Print Preview
Page Setup
Sheet
Then the print area and print titles (Rows to repeat at top, columns to repeat at top)
are all grayed out and cannot be selected.
If, however, I choose the
page layout bar and click print titles then
everything works fine.
Thanks for the solution!!! -
Print directly to the printer option in the Windows registry
I need to find the location for the option to "Print directly to the printer" in the Windows registry. I am trying to create a GPO to enable this option at login and I can't find the location for it. Is this possible to do? If not, is there another way to enable this at startup for all users? We are running Adobe Acrobat X on Windows 7 Enterprise 32-bit.
ThanksI guess that those of use responding don't know enough about the process you are trying to implement to be of help. Printing to network drives has been an issue for folks for a long time and a lot seems to depend on the network. That is probably of zero help and all I can suggest is just to hang on for someone who hopefully has an idea. If we can get a better handle on what you are trying to do, we might be able to make suggestions. However, I think our answers are not going to be there for the registry issue.
-
Print directly to the printer from Oracle 9I
Please it is possible to print directly to the printer from Oracle 9i without having to show the report on the web.
Please it is possible to print directly to the printer from Oracle 9i without having to show the report on the web.
Maybe you are looking for
-
Delivery Completed Indicator set during BAPI_PRODORDCONF_CREATE_TT
Hi Gurus, I am using BAPI_PRODORDCONF_CREATE_TT to perform our production confirmation. I want to force a goods movement item to be "Delivery Completed". I found the field GOODSMOVEMENTS-NO_MORE_GR in the BAPI which has a component type ELIKZ. When i
-
Creative Cloud desktop app STILL signing out automatically
I realize there are other threads on this, but wanted to chime in and say this is STILL an ongoing issue. And it seems especially worse after the last CC app update. I've lost count of the number of times I've had to sign in today. After watching t
-
Which is the best way to edit this program and make it read 1 sample from each channel?
The original program was made with Traditional NI-DAQ. I have edit it to DAQmx the best that i could. The program it's already applying the voltages that are generate in the code(Daqmx Write.vi). But i'm having problems with acquiring voltages it's g
-
First things first, I have the Tungsten T5. Last night, I entered 7 files in to the Palm Pilot Desktop program. They were there when I closed the program. I shut my computer off because I was traveling out of town today and when I turned my compute
-
ZISWIN not updating image safe data
Hello, Have this weird problem on a HP d510c machine. When machine boot up to pxe, it doesn't find any work to do and shutdown. (other model works, HP dc7600 etc.) After some digging around, found ZISWIN contain no data. Register the wk and still not