Envy M4-1015dx RAM Upgrade Help

Hi,
I recently purchased 2 sticks of 8GB ram to replace the 2 sticks of 4GB currently in my Envy m4-1015dx notebook. But, I'm not sure where I need to open the laptop at. I would prefer to do this myself so if someone could perhaps detail or walk me through where I need to unscrew things, I would greatly appreciate it.
Thanks
This question was solved.
View Solution.

Codester1023 wrote:
Hi,
I recently purchased 2 sticks of 8GB ram to replace the 2 sticks of 4GB currently in my Envy m4-1015dx notebook. But, I'm not sure where I need to open the laptop at. I would prefer to do this myself so if someone could perhaps detail or walk me through where I need to unscrew things, I would greatly appreciate it.
Thanks
Envy M4 Maintenance and Service Guide: http://h10032.www1.hp.com/ctg/Manual/c03600883.pdf
You'll need to eject the battery and then remove the service panel on the bottom. You can see the illustrated parts in the manual posted above. Let me know if you need anything else.

Similar Messages

HP Envy 13 1030nr. Windows 7 64-bit. RAM upgrade help.

I just purchased a RAM upgrade for my Envy 13 and I was trying to figure out how exactly to access the memory module. I couldn't find a youtube video for the Envy 13 and reading the maintenance manual provides only partial instructions to access the memory module. It tells you what you need to do (Disconnect the TouchPad cable 2 from the low insertion force (LIF) connector on the system board) but not how to do it without damaging the computer. I don't want to permanently sever a cable or anything so I'm looking for help via a link to a video or more detailed instructions on exactly how to safely access the memory module.
I was under the impression that this would be a quick replacement, but the more I read the manual, the more I think that this is going to be a little more complicated than opening up the bottom and removing the current RAM chip and replacing it with the one I have. Any help would be appreciated. Thanks!

Here is the Manual:
Manual
Memory is indeed on the motherboard and getting there requires nearly complete disassembly. See Page 4-26. Not sure how this qualifies as "easy" and if you have not done this before you should get some help. And yes, keep careful track of those screws.

Will a ram upgrade help this computer.

My family has a 2008 iMac that I never use but my father uses for pictures, Skype etc. The specs are as follows
iMac
Model Identifier:           iMac8,1
Processor Name:           Intel Core 2 Duo
Processor Speed:           2.66 GHz
Number of Processors:               1
Total Number of Cores:               2
L2 Cache:           6 MB
Memory:           2 GB
Its running OSX 10.10.2 will a ram upgrade drastically help the performance, it is currently using 1.98 GB of 2 GB of ram when idle, any help would be appreciated 4 GB of ram needed or push it to 6 GB I read on OWC that it can accept 6 GB clarification on that would help. Sorry for the weird question I am a linux/windows user and I am not very knowledgeable with OSX.

2GB of RAM is the minimum system requirements to run Yosemite, 10.10.x. To get a better user experience upgrade the RAM on the 2008 iMac to 6GB, OWC (www.macsales.com) makes a kit for doing so. The link is listed below. You can also contact Crucial.com and they will sell a 1x2GB DIMM and a 1x4GB DIMM (6GB total) however they don't sell the two together as a kit.
The machine currently has 2 x 1GB DIMMs installed, therefore to get to 6GB both DIMMs need to be replaced.
http://eshop.macsales.com/item/Other%20World%20Computing/6400DDR2S6GP/

HP 240 G3 Laptop RAM Upgrade Help

Hi! I just purchased a HP 240 G3 laptop, and would like to upgrade RAM to 8 GB.Here are the laptop specs as obtained from HP support assistant: Model: HP 240 G3 Notebook PCProduct No.: M1V30PA#ACJProcessor: Intel(R) Pentium(R) CPU N3540 @ 2.16GHzOS: Win 8.1Current RAM: 2GB Hynix Semiconductor 1333MHz (DDR3) Can I go for a 8GB Transcend 1600 MHz, or should I just get 1333 MHz?Laptop supports upto 8 GB as per seller's brochure.There is only one slot. Any help would be greatly appreciated!Cheers.

Here is the Manual: Service manual The Manual actually says if I am reading it right that the Bay Trail models have 2 memory slots. I am skeptical. Does yours have a service cover for the memory? If not, it is going to require motherboard removal to get to it. It appears that DDR3L-1600 memory is compatible with all versions of this model of laptop although some will downclock to 1333. The Official HP Part number for an 8 gig module is: 8-GB (PC3L, 12800, 1600-MHz) 693374-001 If this is "the Answer" please click "Accept as Solution" to help others find it.

Battery not recognised after ram upgrade - Help!

I just attempted a Ram memory upgrade that worked fine, but my battery stopped being recognised.
The battery was fine before, even so - I bought a new one (I tested in a different computer - it worked there) - still doesn`t work.
I decided to put back the old RAM - still no working Battery.
Reseted the SMC and the NVRAM 500 times and nothing changes.
Already have the latest Firmware (Efi and SMC) for quite a long time, can`t reinstall it or downgrade it (due to apple.). Apparently CD firmware restauration not available to my model ( original installation cd don`t work beacuse it is a previous version of firmware?)
What else can I do?
Is there any way to force a firmware installation ?
Macbook Pro 13`` (8.1- early 2011)
I7 -2.7ghz
8gb
500gb
OSX Mavericks

Run an Apple Hardware Test:
http://support.apple.com/en-us/HT201257
Note an error free AHT is not definitive.
Check the connections on the MBP and the charger for dirt, debris and discoloration. The pins on the charger are spring loaded and should move freely.
Ciao.

Mac Mini Ram Upgrade Help!

Hey Apple Users
Just bought my first Mac computer about 7 months ago, The minimac. Now this little monster is fast still for only 1gb of ram, and i'm running all high end Adobe softwear that requires 2 gb or more on regular computers, but she started to lag alittle using Adobe Premiere Pro cs4, so i decided to buy 4 gb of ram from ebay(brand New). I got the ram took my mini apart, did everything proper, destaticed myself etc and installed the 2 ram chips. after i went to boot up I got 1 Beep and a light every 10 secs maybe? So first thing i thought the ram was defective, So i tested the ram with my 1 gb in one slot and a 2 gb in the other and she booted fine and showed 3 gb ram. I tested the other 2 gb as well and worked fine. Don't understand why they wouldn't work together. So i said *** i'll just use 3gb instead and have a back up if the other 2 gb fails. Now after 2 hours of using my computer she froze solid, so i restarted and then i got a grey screen, 3 lights/3beeps. This means ram not recongized as far as i'v learned I may be wrong, so now i'm back with just my 1 gb in my comp running fine. Any ideas what could be the problem here?

Well, i'm In university for Graphic Design and they gave me this Minimac, brand new as a part of my Tuition. I started school in September so it's a few months old. Is there away I could figure information like this out by using About this Mac, under finder?
Model Name: Mac mini
Model Identifier: Macmini3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 1 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MM31.0081.B06
SMC Version (system): 1.35f0
Serial Number (system): YM9310G219X
Hardware UUID: 19690D00-9F52-5936-8C1F-770F821426FB
System Version: Mac OS X 10.5.8 (9L31a)
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 1 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x80CE
Part Number: 0x4D34373142323837334548312D4346382020
Serial Number: 0x82C2001F
BANK 1/DIMM0:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
I don't know if any of this helps?

RAM Upgrade Help for Acer Aspire V5-551-8401

I only see 1 RAM slot for my Acer Aspire V5-551-8401 and it has the factor 2GB RAM card loaded into it, yet my computer shows 4GB of total RAM, In not sure how. I'm running the factory installed Windows 8. Can I load a 4GB RAM into that slot instead? Am I just not seeing the 2nd slot? There appears to be soom copper thing screwed into the location where I would have expected to se a second RAM slot, and the copper continues up to the cooling fan. I wanted to increase the RAM to 8GB to see if it helps with performance (which is slow) but now became confused when I saw what I described above. Any help is greatly appreciated, thanks! Mark

Hello Mark, Your laptop supports up to 6Gb - DDR3 - 1600MHz (2Gb-1333MHz on board + 1x4Gb).The original memory modules:KN.4GB03.013SODIMM.4GB.DDR3-1600.NANYAKN.4GB07.003SODIMM.4GB.DDR3-1600.KINGSTONKN.4GB09.005SODIMM.4GB.DDR3-1600.ELPIDAKN.4GB0G.019SODIMM.4GB.DDR3-1600.HYNIX

Need help regarding ram upgrade

hi,
I m having dv6703tx with folloging config:
MS Vista 32-bit
Intel Core 2 Duo CPU T5450 @ .66Ghz
2 GB RAM
NVIDDIA GeForce 8400M GS
I need to upgrade another 2 GB extra
can any one will help me regarding this.
I am having following q:
Is my system will work good and fast after upgrading the RAM?
my os will support for it?
any problem will creating bcoz of upgrading ram?
which companys ram will better and what will be the cost for it?
regards,
niranjan

HI,
niru12 wrote:
hi,
I m having dv6703tx with folloging config:
MS Vista 32-bit
Intel Core 2 Duo CPU T5450 @ .66Ghz
2 GB RAM
NVIDDIA GeForce 8400M GS
I need to upgrade another 2 GB extra
can any one will help me regarding this.
I am having following q:
Is my system will work good and fast after upgrading the RAM?
my os will support for it?
any problem will creating bcoz of upgrading ram?
which companys ram will better and what will be the cost for it?
regards,
niranjan
Adding RAM will help especially for graphics and number crunching applications. You will no longer get the out of memory warnings. Windows 7 is happier with more memory.
Be advised that there are only two soDIMM slots for memory in a notebook. That means you will have to replace the current memory modules with two 2 GB memory modules to achieve 4 GB of installed memory.
I recommend only purchasing guaranteed compatible memory modules.
That way you won't have disappointments ( blue screens or black screens) after new module installation and attempting to boot into Windows.
The better memory modules are made by manufacturers such as Kingston (model KTH-ZD8000B/2G • DDR2-667 / PC2-5300 • 1.8V)
As for the cost: You will have to find your own local supplier by searching online .
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I have a Presario CQ56-115DX. I attempted a ram upgrade now I only get bsod.Help?

I recently attemptede a ram upgrade to 2-4 GB PC3 DDR3 1066Mhz modules but the notebook would not turn on(aka.....black screen and no sound, just blinking caps lock). I then put the original RAM back into the previously working pc and it blue screened. I attempted a system repair with a factory OEM of windows 7 but it was unsuccessful. The error tells me to remove or uninstall newly added software or hardware. I ran a memtest from bios on both the memory and the hard drive which detected no problems. I reformatted the hard drive and attempted a reinstall but the computer blue-screened during installation before the files were even installed. Could someone please help?

Try install with just one memory module installed, try the other slot if it does not work on the first try.

Change HDD with SSD in Notebook HP ENVY 15-k000nl - Warranty expiration - Maximun RAM Upgrade

Good morning,
I have bought the above notebook one week ago, in the HP main site there wasn't photo about the rear and when I saw there is no easy way for chanhe HDD to SSD, I have to unscrew about 15 screws located here and there
Just I would like know if I change the SSD the warranty will expire?.
At the same time please can I upgrade the RAM to 16 GB DDR3L? which is the Maximun RAM Upgradable?
Best regards
Christian

Hi, Christian:
Yes, if you replace the hard drive or memory, the warranty will be voided as neither component is a DIY (do it yourself) project.
Please see the service manual at the link below, chapter 6 for the authorized service center removal and replacement procedures for those components.
http://h10032.www1.hp.com/ctg/Manual/c04409752.pdf

Memory modules can we use for RAM upgrade of HP Pavilion dv5-1198de??

What memory modules can we use for RAM upgrade of HP Pavilion dv5-1198de??
Max RAM? Vista? Windows 7?

I can't find a dv5-1198de but I did find a dv5-1198er which should be similiar. It states up to 8 gb of ram. HERE
I would try www.Crucial.com for suggested memory ,you can use their Scanner Tool to let it detect what you have and what you can upgrade/replace with.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

MacBook Pro 13' Early 2011: Still Slow After 16GB RAM Upgrade

Hi,
I have a MacBook Pro 13' Early 2011 running Yosemite. After the RAM upgrade to 16GB, the speed of the computer is still not satisfactory, having some lag times in launching softwares and startup. Please suggest me what to do. Below is the report. Thank you!
Problem description:
The computer is still running slow even after the RAM upgrade to 16GB.
EtreCheck version: 2.0.11 (98)
Report generated November 18, 2014 at 5:40:20 AM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:7:52
Disk Information: ℹ️
ST9320325ASG disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 318.84 GB (156.62 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[not loaded] com.marvell.kext.USBGenericPrinterClass (1.0.0) Support
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
[not loaded] com.wacom.kext.pentablet (5.3.0 - SDK 10.8) Support
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.rim.BBAlbumArtCacher.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[running] com.wacom.pentablet.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.rim.BBDaemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[not loaded] com.valvesoftware.steamclean.plist Support
User Login Items: ℹ️
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 71 Check version
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
DirectorShockwave: Version: 11.6.5r635 Support
User Internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 162.22 GB
Destinations:
LACIE SHARE [Local]
Total size: 350.07 GB
Total number of backups: 5
Oldest backup: 2012-07-17 01:12:57 +0000
Last backup: 2014-03-19 07:05:24 +0000
Size of backup disk: Too small
Backup size 350.07 GB < (Disk used 162.22 GB X 3)
Top Processes by CPU: ℹ️
      9% mds
      6% WindowServer
      1% BBLaunchAgent
      0% AppleSpell
      0% fontd
Top Processes by Memory: ℹ️
103 MB mds_stores
86 MB Dropbox
86 MB ocspd
69 MB com.apple.WebKit.WebContent
52 MB Safari
Virtual Memory Information: ℹ️
13.07 GB Free RAM
1.71 GB Active RAM
740 MB Inactive RAM
1.66 GB Wired RAM
1.31 GB Page-ins
0 B Page-outs

First go to the RIM web site and look to see if they have an uninstaller for the device you had. Some times a reinstall of the application and then running the uninstaller is required for complete removal.
If no uninstaller is available, then you will have to use Spotlight to find all items with 'Blackberry' and 'Rim' in the titles. I would also download EasyFind and use that to locate such files. Often it will locate items that Spotlight misses.
Ciao.

This is the regular status of the memory of my macbook pro. Do you think I need a RAM upgrade?

Hi there,
I'm hoping to seek the expert views of the community here.
I have a MacBook Pro, Late 2011, 17 inch. Running latest version of Mavericks. Speed seems to have slowed somewhat, perhaps since I upgraded to Mavericks, but not certain about that. Based on my research of the Apple communities, I suspect that I may benefit from a RAM upgrade.
Attached are a few screen shots to assist:
Based on what I have researched in the community, the fact that I have used 3.99GB of 4.00GB, and have used 5.63GB of Virtual memory, seems to suggest to me that I have well and truly maxed out my RAM. Also there is a high number of read ins/outs (but it had been a wheile since I last did a restart on the MBP (if that has any effect on these numbers here).
I have also read that my model of MacBook Pro is upgradeable to 16GB of RAM (2 x 8GB).
Thoughts and views from the community would be greatly appreciated. Will additional RAM help the speed and performance of my MacBook Pro?
Many thanks.

More RAM is always a Prudent move...
Kerrod wrote:
Will additional RAM help the speed and performance of my MacBook Pro?
It will certainly help with Performance.
Macs can be very Fussy about RAM...
You can use these Links to check which RAM is suitable for your Mac...
http://eshop.macsales.com/shop/apple/memory/
http://www.crucial.com
It is Important to get the Correct and Matching RAM
Those sites also have videos on how to Install RAM should you need it....

Kernel Power error after Win 7 and RAM upgrade

Hello,
I posted earlier on the subject of win7 and ram upgrades. I did both and it seemed to go fine. I did the ram first ... replaced a 667Mhz 1gb with a 800Mhz 2gb. A couple of days later the computer just shut itself down and restarted. Since then it has done it another 5 times, seemingly at random. Yesterday I decided to spend some time looking into it and found the 'event log'. All the shutdowns are recorded as 'critical'. A search on the web/here showed other occurences of the fault associated with drivers as much as anything.
After I did the win update I did update almost every driver with ones from this site.
Other than the shutdowns the only issues I have which are of very mild concern are the length of time the fingerprint reader takes to be present and that occasionally the cursor is unavailable for about a minute after logging on. When you try and control it it jumps about anywhere but where you want it to go. I rolled back the alps driver and that seems to have sorted the cursor issue.
So, details of the shutdown from the event log are as follows.
Log Name:      System
Source:        Microsoft-Windows-Kernel-Power
Date:          16/01/2011 16:21:31
Event ID:      41
Task Category: (63)
Level:         Critical
Keywords:      (2)
User:          SYSTEM
Computer:      (removed by me)
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
There's more (I've shown it all below) but it's not that important. When I looked into it I found details of the problem on the microsoft knowledge base. Its described here http://support.microsoft.com/kb/2028504.
I believe I fit into scenario 3 for cause and resolution.
So, it seems that win7 and mixed speed ram may be a problem on some computers ... probably only a tiny number, but it looks like the HP3507 is one of them. I did see somewhere that I could down speed from 667 to 266 which might help with memory compatability but I can't see anywhere on the the insydeH20 bios where to do it. BIOS is version F18 .... upgraded from F15 as part of the Win7/RAM ugrade.
Before I swap back to the 'old' memory I'll see if anybody here can come up with any ideas. It may be that I have to sell off the expensive 2gb memory (ddr2 800mhz 200 pin) for £39.99 from maplin at a bargain price and get 2gb of 667Mhz from somewhere.
The full 'detail' regarding the fault is below.
Bye for now.
Phil
Log Name:      SystemSource:        Microsoft-Windows-Kernel-Power
Date:          16/01/2011 16:21:31
Event ID:      41
Task Category: (63)
Level:         Critical
Keywords:      (2)
User:          SYSTEM
Computer:      (removed by me)
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
    <EventID>41</EventID>
    <Version>2</Version>
    <Level>1</Level>
    <Task>63</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000002</Keywords>
    <TimeCreated SystemTime="2011-01-16T16:21:31.187617000Z" />
    <EventRecordID>194889</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="8" />
    <Channel>System</Channel>
    <Computer>Home_Laptop</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="BugcheckCode">0</Data>
    <Data Name="BugcheckParameter1">0x0</Data>
    <Data Name="BugcheckParameter2">0x0</Data>
    <Data Name="BugcheckParameter3">0x0</Data>
    <Data Name="BugcheckParameter4">0x0</Data>
    <Data Name="SleepInProgress">false</Data>
    <Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>

Hi DWeiland and Schwede,
Thanks for your replies. Yes I did the runtime engine registry change and also mass compiled the LV7.1 folder and my sourcecode. I still see the problem as I have set the LV adapter as Lv 7.1.1 runtime engine. Now I have changed it to LV7.1 development system. With this setting, it is not giving any error. Thus I don’t see any problem now. The older version of the code had the adapter as the runtime engine for some reason, now I have changed the setting to the development system. I hope that it shouldn’t be a problem.
Thanks again!
Thank you,
Sasi

Upgrade help for G3 350Mhz OS 10.0.4 to 10.1.5

I've been loaned a Connon PowershotA520 digital camera that requires OS X 10.1.5 to operate camera with my machine. An older B&W G3 350Mhz. with 128MB installed RAM, running Classic 9.1. and OS X 10.0.4 on same hard drive. What is the easiest and least costly way to upgrade to OS X 10.1.5 and not loose Classic? I have a ton of programs and peripherals that want the option of Classic.Other questions - can upgrade be done with CD's or downloads - and will I need RAM upgrade as well? Will it require a full erase and reinstall? Help appreciated.
B&W G3 350Mhz. Mac OS X (10.0.x) 128 MB RAM

Hi Bird 1;
May I welcome you to the Apple Discussion Forum.
I concur with the solution Tom presented to you.
If you still want to upgrade OS X instead, I would suggest that rather then upgrading to 10.1.5 you seriously consider going to at least 10.2.8. When OS X reached 10.2.8 it was a much better operating system then anything that preceded that.
Allan

Envy M4-1015dx RAM Upgrade Help

Similar Messages

Maybe you are looking for