Envy printer wont connect to internet

I bought an HP printer 7640.  I am trying to get it set up.  The Network Configuration page includes the following information:1) Network Status - Ready;2) Active Connection Type - Wireless;3) Internet - Not Connected.   The printer "discovered" my 802.11 network, and I entered the password. The little blue light on the front of the printer is solid (always on, not flashing). I cannot get a Claim page printed out because after I 1) touch ePrint,2) then Accept, it goes into checking for printer updates, then tells me I'm not connected to the internet.  

1. Turn off router for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Similar Messages

  • How to print claim code for envy 5530 without connecting to internet?

    how to print claim code for hp envy 5530 without connecting to internet. We do not have wireless internet and we are trying to set up the eprint app for our samsun android phones and ipad. We need to print off the claim code from the printer but it seems we need to have internet for that. is there any way around that?
    Thanks

    Hi,
    You have to, without connecting to the internet, the claim code (if you can get one) is useless.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My iTunes wont connect to internet althought my internet is on

    My iTunes wont connect to internet althought my internet is on

    Are you allowing iTunes to communicate through the firewall ?
    Enable it if not. If you did a software update or a windows update, the firewall might have disable some of your allows...

  • HT203128 my itunes wont connect to internet

    my iTunes wont connect to internet and devices wont sync
    ipod ios 6.1.6

    Look at your security software settings. Make sure iTunes.exe and iTunesHelper.exe are allowed to connect to the internet.

  • Printer not connected to internet - have pulled and reattached ISB with no change.

    Printer not connected to internet - have pulled and reattached ISB with no change.

    Is the printer connected to a network?  For any Internet functionality to be present on printers, the printer will need to have its own connection to the network.  It sounds like the printer only has a USB connection.
    On the printer, go to Setup>Network>Print Network Configuration Page.  
    Does it have an IP address, subnet mask, default gateway, and DNS servers listed (other than 0.0.0.0 or 169.254.X.X)?  If so, then it is connected.  If not, then go to Setup>Network>Wireless Setup Wizard to connect to the wireless network.  This should get the printer connected provided there is a wireless network available.  
    What brand and model is the router (if one is present)?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Creative cloud and updater wont connect to internet can't open PR

    my premier will not open! the updater and the cloud wont connect to internet!
    Also why is my go pro footage blocky

    Hi,
    Which version of Premiere Pro won't open? Do you see the splash screen? Which OS is installed on your computer? Have you tried to turn off your firewall? Sometimes that can cause this issue.
    Thanks,
    Rameez

  • Macbook pro wont connect to internet using cable, but connects using wifi fine

    My macbook pro wont connect to the internet using a cable, but connects using wifi fine.  I use wifi at home but sometimes need to use my laptop at work and connect using a cable but it says i'm not connected to the internet?

    Can you open a terminal and invoke the following commands:
    ping -c 10 localhost
    and
    ping -c 10 google.com
    You should normally get something like:
    PING google.com (74.125.224.103): 56 data bytes
    64 bytes from 74.125.224.103: icmp_seq=0 ttl=55 time=19.053 ms
    64 bytes from 74.125.224.103: icmp_seq=1 ttl=55 time=37.692 ms
    64 bytes from 74.125.224.103: icmp_seq=2 ttl=55 time=46.988 ms
    64 bytes from 74.125.224.103: icmp_seq=3 ttl=55 time=33.466 ms
    64 bytes from 74.125.224.103: icmp_seq=4 ttl=55 time=28.940 ms
    64 bytes from 74.125.224.103: icmp_seq=5 ttl=55 time=58.070 ms
    64 bytes from 74.125.224.103: icmp_seq=6 ttl=55 time=33.335 ms
    64 bytes from 74.125.224.103: icmp_seq=7 ttl=55 time=33.361 ms
    64 bytes from 74.125.224.103: icmp_seq=8 ttl=55 time=36.099 ms
    64 bytes from 74.125.224.103: icmp_seq=9 ttl=55 time=41.111 ms
    --- google.com ping statistics ---
    10 packets transmitted, 10 packets received, 0.0% packet loss
    round-trip min/avg/max/stddev = 19.053/36.811/58.070/9.939 ms

  • New Macbook Pro Wont Connect to Internet

    I just got a Macbook Pro today and it wont connect to the my wireless connection. The only thing I can think of is when I was in the start up it ask what I connected to the internet with and because I was not within my own network I press "This computer does not connect to the internet" option. How do I change this?

    I'm using a Linksys WRT54G and ran into these exact symptoms today. After downloading all available updates, dwiddling with a bunch of stuff I didn't really understand (but that's never stopped a hacker like me), getting frustrated in trying to figure out how to either make a reservation with a local Mac Store Genius or talk to a real person at Apple Support I tried unplugging my wireless router and resetting it. My computer came up and is now working fine... go figure.
    I've got to admit that I was ready to panic after looking at the discussion board. I'm an old PC person and now consider myself a "convert" to Macs. Glad it didn't let me down.
    MacBook Pro 15"   Mac OS X (10.4.8)  

  • Printer wont connect when wep password enabled

    Hi. I've had a HP Deskjet 5850 for many years. It worked perfectly with my D-Link wifi router, it connected wirelessly with no issues. I recently bought an airport extreme, I've reset everything on the printer and it works via ethernet, but it only works via wifi when airport is set for wireless security is set to none. If I assign a password of any sort it won't connect.
    In the printer's admin webpage I've set and reset it for a wep password and it wont connect. Does anyone know if this printer is compatible with airports wep password protection?
    Thanks!

    I created a WEP password, this is what the printer supports. However, even my MacBook had issues logging in with WEP, it would get bumped off the network and then could only log into the my airport extreme's wireless network after a restart... and then it would get bumped off again. So I switched the airport to WPA/WPA2 password and the macbook works fine now, and the connection is faster than it was with a WEP password. Does the AirPort have known issues with WEP?
    Thanks!

  • Just updated itunes and it wont connect to internet

    just updated i tunes and it wont connect to the internett to recognise songs/albums?? anyone else?

    Hi there dale333!
    I have an article here for you that can help you troubleshoot this issue with your connection to the iTunes Store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Wireless printer wont connect to samsung tab

    Hi,
    Just downloaded the all in one app for a samsung galaxy tab3. The printer is a officejet 6500. Ive connected the printer to wifi but the tab wont connect to the printer. It showsnits found it, but says unavailable. Any ideas? Thanks

    Hi,
    What is the exact printer model?
    If it is the HP Officejet 6500 (e709) printer, I afraid it only support printing via the HP ePrint app, the printer is not supported for the HP All-In-One Remote app:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02814760&cc=us&dlc=en&lc=en#N1311
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Wont connect to internet over VZW network

    Ok so I just got my HTC Thunderbolt yesterday and it wont connect to the internet over the Verizon network. It works just fine when it is connected to wifi. I have tried turning the mobile network on and off and everything but it still wont. 
    BTW I can still call and text but everything that requires the internet does not work.

    I live on the Fringe of 4G network.  My Brother in law had this problem, and hit battery life was subpar.
    This fixed it for him
    Factory Reset his phone
    He used the dialer and put in *#*#INFO#*#*
    Changed the CDMA+LTE to CDMA Only (PRL)
    Then his did his setup as usual, and so far he hasn't had any problems since.  If you want to try that and see what happens by all means try it, but don't get mad at me if it doesn't work

  • HT4623 my i pad wont connect to internet

    my first gen i pad has suddenly stopped connecting to internet. nothing has changed with service but did add extender . ipad is still in vincenity of orig wifi modem. has anyone experienced this

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Printer wont connect to computer properly

    Have recently purchased HP Envy 4507 is connected to the network but will not print all trhe time. will print one day and then decides not to the next. what can we do to prevent this?
    thanks  

    Hi @gemmawestlake 
    Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause.   Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
    In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
    ^ This is not limited to Laserjet printers.
    Also, choose the appropriate link below to ensure the printer has the latest firmware update. 
    Choose this link if you have a 32bit operating system: HPCOM_HP_ENVY_4500_series_x86_000_003.exe
    Choose this link if you have a 64bit operating system: HPCOM_HP_ENVY_4500_series_x64_000_003.exe
    Is the Windows Version on My Computer 32-bit or 64-bit?
    This Firmware update improves and fixes the following issues:
    Enabled Scheduled Delivery/Printables
    Improves Connectivity reliability of your device
    Fixes miscellaneous minor defects
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Blackbook wont connect to internet zomg?!

    Hihi everyone. Just a little background info on my macbooks, this is my third one. Having alot of trouble with customer service where I live, plus I made the terrible mistake of buying a mac from a "authorized dealer" instead of at the apple store, just a few miles away.
    Either way I'm on my third macbook, a fancy shiny black one.
    Been working well for a week or so but my It wont connect to the internet anymore?
    Also to clear up some suggestions, I've reset my router.
    I've also switched out cords, and even tried another cord where my parents Mac is hooked up to.
    It was working fine for a week or so on the internet but one day it randomly wont connect. I'm gonna try the wireless at my school tomorrow to see if that works but any suggestions?
    I mean I may be crazy here but I'm thinking something with the internet connector internally theres something misplaced?

    Ethernet. It worked before, and I'm using the same cord as I use for my pc. But one day it just stopped connecting to the internet.

Maybe you are looking for

  • Why Dynamic Parameter is not working, when i create report using stored procedure ?

    Post Author: Shashi Kant CA Forum: General Hi all Why Dynamic Parameter is not working, when i create report XI using stored procedure ? Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stor

  • Cannot install iTunes on windows 7 64bit

    Okay, I like so many cannot install iTunes on Windows 7 64bit. Now Orginally I got a message saying something to the effect of: There was a problem with the install you do not have permission for something... Through some investigating my iTunes was

  • Problem in Viewing PDF from gecko

    I am having Problems since the Yosemite update. Whenever i generate a PDF using firefox, it appears blank in preview of Yosemite. It worked fine in Mavericks,but it fails after the recent update. Why it is so

  • Who's Who: How to refine employee search using customer defined indicator?

    Hello, It is possible to refine employee search using status indicator STAT2 (Employees' Employment Status). I would like to refine employee search using e.g. Customer defined status indicator STAT1. I created an entry identical to STAT2 but with STA

  • Macbook Pro with retina display waking up

    I have a Macbook Pro with retina display, and if it goes to sleep and I try to wake it a couple seconds later, the screen turns dark blue and I can only see the mouse. A couple seconds later it starts working and I can log in. This only happens if I