Envy Ultrabook 6 Problem with recovery after hard drive failure (out of warranty)

Hi
Please can someone tell me if it is true that to use HP factory recovery discs, the computer hardware has to be the exact same as when bought. 
After wasted hours of trying to get recovery discs to work, I end up with the same 'Recovery failed@ screen and some unhelpful lines of code. 
From reading various posts it appears that I have to have an HP replacment HDD of the same type as came with the computer. If this is the case, then the links on the support pages should say this before I shell out £39 for a set of discs.
To me a hard drive is a hard drive. I replaced a fried hard drive (1 month outside of warranty end) with a good brand replacement, but larger size. The discs will not load. 
However I was able to load W7 form an iso file and get that to work. I need the recovery because I do not know how to set up the raid that allows quick boot on this laptop, and I don't have the time or any furhter inclination to get it to work. 
Partly a rant, sorry, but am I right and is there any solution?
Regards
This question was solved.
View Solution.

Hi !
From what I have read here, YES you can recover with a different(non-HP) harddrive. It just has to be the SAME size or bigger.
I would make sure that the laptop BIOS sees the new drive and set boot options to DVD in BIOS.
I don't have access to detailed instructions, but you can foun them here in this forum.
Regards,
Louis

Similar Messages

  • Problems with Monitor after Hard Drive Replacement

    I never had any problems with my iBook G4 until the past 6 months. I sent it in once because it wouldn't start up. They were able to fix the problem without replacing the hard drive. It malfunctioned again and the second time they had to replace the hard drive. I've had it back for about a month and 1/2 now and for the past three weeks, whenever I try to use it I get problems with my monitor. I'm not sure if the video card is going out or what? The image on the screen gets chopped up in horizontal and vertical line increments. Its really hard to explain but sometimes it comes in waves and I have to shut down my computer and walk away from it. Other times like right now, I'm able to use it for up to an hour but then it gets choppy again and I can't use it. My Apple Care Protection Plan expires in December and I want to get as much from it as I possibly can before I have to replace the laptop altogether.

    sorry,
    to clarify, "internal or external;" display
    internal = ibook display
    external = display connected via display adaptor
    Ok, well I max out the graphics on my ibook on regular intervals (games, high-end graphics work, gigabyte photoshop files etc...)
    It isn't likely to be the hardware, so here's some suggestions.
    LOOSE WIRES/CABLES:
    The ibook's internal monitor connects through the central pivot where the ibook opens, the wires in here may be damaged. (you can't fix this yourself, refer it to apple) this could pertain to a loose or defective cable is you are using and apple display connector also.
    REFRESH RATE: (this sound like your problem)
    to quote a source:
    "If the refresh rate is not properly set the monitor may have a wavy or an appearance that lines are going down or across the monitor slowly or fast. This may also cause a flickering affect."
    http://www.computerhope.com/issues/ch000242.htm#02
    This is set in display preferences. try setting your monitor's refresh rate. (75hz is good)
    INTERFERANCE:
    Monitors are succeptible to electromagnetic interferance: Speakers, hard drives, phones etc. try moving them away from the monitor.
    BAD MONITOR:
    finally; and we hope this isn't the problem. if you are not already doing so, connect an external monitor to the ibook using the display connector (VGA only), if the issue persists with the external monitor the problem is software based, if not you probably have once of a small percentage of monitors that just goes "bad" after a time period, unfortunately it's often cheaper to replace an entire unit as opposed to the screen itself (new computer)
    Message was edited by: Peter Miller

  • Issues with iphoto after hard drive failure - message "library was created with an unreleased version of iphoto"

    I have a late model 2008 13" MacBook that was running OS X 10.5.8 when the hard drive failed 2 weeks ago when I was traveling in Canada. I found a Mac repair centre and they replaced my 250GB with a 500GB hard drive and transferred my data.  (Yeah!!!) I'm now on OS X 10.6.8 (which is great as I guess I should be able to sync my iphone on IOS 7 with my laptop again.... but I digress...)
    I haven't been able to access my photos as I get the message "The photo library was created with an unreleased version of iphoto. Please quit and upgrade this photo library by opening it in iphoto 2 or iphoto 4" when I try to open it.  I can see my photos when I look on Photo Browser in Mail so that's good - they are here...  I looked through past messages with this problem and saw that the advise was to download iphoto Library Manager.  I want to be certain I don't mess anything up so the questions are:
    1. What version of iphoto Library Manager should I download - I had OS X 10.5.8 and my iphoto library was ... (sorry - can't find out what it was, guess it's now 7.1.5)
    2. What do I do after I've downloaded IPLM?
    Many thanks ahead of time for any assistance

    I backed up my iPhoto Library to an external drive even though it looked way to small to hold all my photos.  I have tried several times to open iPhoto whilst depressing the option and command keys but get the same message again:
    "The photo library was created with an unreleased version of iphoto. Please quit and upgrade this photo library by opening it in iphoto 2 or iphoto 4"  Behind this, the little wheel is turning and it says "Loading Photos" (but it doesn't).
    I've got to access these photos for a project deadline that's looming so any help would be really appreciated.

  • Data Recovery After Hard Drive Failure!

    Ok, basically, I've got a 2 1/2 year old iBook G4 with a bombed hard drive, and unfortunately, the last time I backed up was around 3 months ago. Here's what happened right before the crash: some applications like Widgets and Safari were acting fluky, and it wouldn't let me open Word documents, so I restarted, because I thought it might have something to do with the fact that i had downloaded the new version of itunes not that long ago and hadn't restarted since. well, when i restarted, the gray screen with the wheel and the apple symbol went on for a really long time, and then the blue screen came up with the cursor, but nothing else happened, and the blue screen just stayed there. as far as i know, the hard drive wasn't making any unusual noises, just the usual occasional soft sounds that my hard drive has always made (there are usual sounds, right?) a piece of information that might be useful is that the hard drive was almost full (it only had about 5 GB left, which i understand is how much you should leave) could this have caused the failure maybe? anyway, i tried using the hard drive as a target and tried getting another computer to recognize it and pull the files off, but that didn't work. so, i brought it into the apple store, and they got it to boot up but using some external hard drive, i think. they tried disk utility, but that didn't see my hard drive. then the tried disk warrior, and that saw it and repaired it or something, but then it couldn't get the drive to mount. so, i'm assuming that because disk warrior didn't work and couldn't get it to mount, then other software like data rescue, etc... won't either. like all computer users, i've got some REALLY REALLY important data on there, and all the data recovery places i've gotten quotes from are pretty pricey. if the drive doesn't require physical data recovery, only non-physical, as i hope, the cheapest is still $350. even so, the person on the phone there didn't seem to know nearly as much as the people at the more pricier places. so, are there any other options besides expensive data recovery? i read something about using dd - a unix thing, but i don't know the first thing about it (http://www.macosxhints.com/article.php?story=20050302225659382) so i'm not sure i want to risk messing it up even more. and, if worse comes to worst, then i'll use a data recovery place... but can anyone tell me if they've used any of the data recovery companies below, and which ones are good?
    (first three do evaluation for free, and then you decide if you want to continue based on more accurate price idea)
    MacintoshDataRecovery.com
    $500 non physical
    $1100-1600 physical
    Heroic Efforts
    http://www.heroicdata.com/data_recovery
    $350 non physical
    ships to another (very expensive) place if physical
    ACS Data Recovery
    http://www.acsdata.com/index.htm
    $600-700 non physical
    DriveSavers.com
    (recommended by Apple, probably the best, but the most steep, too)
    could cost anywhere from $500-$2700 and $200 evaluation fee even if data is unrecoverable
    Since this is our fourth hard drive failure in four different iBooks in 2 1/2 years, i am starting to become seriously disillusioned about the quality of the hardware Apple uses...not that i would ever get a dell or anything, but still....
    THANK YOU in advance for any tips you might be able to offer, and also for reading this extremely long post!
    katie
    iBook G4   Mac OS X (10.4.3)  
    iBook G4   Mac OS X (10.4.3)  

    I have read good reports concerning Data Rescue although I have not used it myself.
    Once you get your data back, focus on a regular (even daily) backup routine, because as you know only so well, the question is not if a drive will fail, it's when.
    My condolences, by the way.

  • Recovery after hard drive failure?

    Hi everyone,
    Simple question regarding what to do if my hard drive fails. Please bare in mind that my knowledge of computers is less than to be desired!
    I currently use Carbon Copy Cloner (time machine gives me too many issues) to make an identical bootable copy of my hard drive. I assume that if my current hard drive fails, I could just boot from my cloned external drive and then clone my external drive to a new internal HHD.
    Seems easy. So what's the pupose of the recovery partition? Would most of you guys approach the task of hard drive failure in the same way as me?
    Cheers
    Tom

    The recovery partition is instead of having installer discs.  It allows you to restore the last installed operating system to factory state.  At times it may tap into the Apple App Store Server, and need a contact to support to get the right installer to show up.  Mind you, no Mac can install an older operating system than shipped with, except for this tip:
    https://discussions.apple.com/docs/DOC-6841
    Apple discontinued providing installer discs with Mac OS X 10.7 installed Macs.

  • Big problems after hard drive failure - Please help.

    About 2 weeks ago, my Macbook seized, and was sent to Apple to repair.
    It was found that the hard drive failed, and 2 weeks later I received my macbook back with a new hard drive.
    Luckily I had backed up my home drive and was able to restore it using backup.
    Now this is where my problems start.
    My home drive is not the same name ( I think - I can'r remember too well what it was called previously )
    I have my entire music library backed up to an external hard drive, and mounting this hard drive is a REAL pain in the *** now.
    Sometime it loads up, sometime it just doesn;t get recognised, and I can put the USB connection in and out 10 times before it mounts.
    I have verified the disk, and nothing is wrong.
    Does anyone know what this problen could be ?
    I have left the external hard drive in during the night, and after the macbook goes to sleep, I will go back to it in the morning, and the hard drive has been unmounted, and I repeat the exercise over again of trying to mount the drive.
    Its so annoying, and I just dont know wht to do.
    If anyone can help, I;d really appreciate it.
    Griff

    SMART status is a pretty reliable indicator of what is going on. You should back up your irreplaceable files as soon as possible.

  • Restoration after Hard Drive Failure

    Hello all.
    My Powerbook G4 suffered a hard drive failure a couple of months ago, and every bit of information was lost in no-man's land. After seeking help with Apple, I was sent to DriveSavers. Thankfully, they were able to recover 100% of my drive or that's what they tell me anyway. (No need to scold me, I have learned my lesson about backing up EVERYTHING -- especially when the bill arrived from DriveSavers!) The Powerbook was kaput, so I decided to purchase an new iMac. DriveSavers has put my entire Powerbook contents onto several DVD discs, but so far I have had very little luck with actually transferring and using any of it on the iMac. I have been able to copy document files from Appleworks, Photoshop, etc. onto the iMac, and I can open them and use them with no problem. Although, I did have to go back and re-install the actual Photoshop and Appleworks applications from their original software discs since I was unable to successfully copy the applications from the DriveSavers discs onto the iMac. Still, I am in desperate need of certain Apple applications from the Powerbook that just will not appear on the iMac -- things like Address Book, all of my Stickies , plus the other Stickies that were only located on Dashboard (i was a stickies freak), the emails and contacts saved in Mail, the appts. & scheduling in iCal, etc. I cannot successfully access these kinds of things. I am able to copy an entire disc from DriveSavers onto the iMac, but when I launch the Address Book application from that folder, it just opens up the empty, brand new Address Book from the iMac or the new, empty iCal. The same thing happens with other similar programs. (I think iTunes has been the only thing with which I have any kind of success.) I've even rifled through the DVD discs and gone through my old User folder to the Library folder, then the Caches folder, and finally to the .com.apple.AddressBook folder where I extracted just the Metadata folder which clearly contains all of my contacts. When I try to add just the contact cards to the iMac's Address Book application, I still doesn't work and remains empty. The only way I've been able to look at any of my contacts is to use TextEdit to open those contact cards, and then dig through all of the jargon and piece together the info. It's very frustrating and time-consuming. I would just like for my Powerbook to be reincarnated, if you will, here on this new iMac. Is this even possible? I am completely baffled, and beginning to fear that I may have paid thousands of dollars for DVDs that would serve me better if I were lost in the Sahara and needing to signal a plane flying overhead by reflecting them against the sun. If anyone has any advice or tips, I would be very grateful.
    Cheers,
    Maize
    Intel-based iMac Mac OS X (10.4.6)
    PowerbookG4 Mac OS X (10.4.6)
    PowerbookG4   Mac OS X (10.4.6)  

    Hi,
    Maybe this article can help :
    http://docs.info.apple.com/article.html?artnum=106941#2c
    Take a look at the 'manual' backup and restore sections of the article.
    Good luck!
    iBook G4   Mac OS X (10.4.7)  

  • IPhone synch after hard drive failure

    I have an iMac 7.1 and after a total hard drive failure I had a new drive installed. Everything was wiped out, but at least I have the iTunes library still on my iPhone Here starts the problem.
    After reading posts for the better half of a day I tried all suggested approaches, however the descriptions for doing it within iTunes don't seem to work (they insist on erase and synch the new (empty) library. I authorized the iTunes account on the iMac - still the same.
    There are programs out there that rip the content from the iPhone, something I think is the wrong approach. Apple has to provide a way for its customers that have done nothing wrong to get their data back from a legal copy on the iPhone. This right way will likely exist, I just can't find it.
    Anyone can point me in the right direction?

    Hi, what no back up? -- well lets be honest everything should be covered by Apple & iTunes but!!
    I use SENUTI @ odd times & it's an excellent App...why you are so against 3rd party app's I'm not sure..
    If you have friend with a Mac & has some music you like you can always set up SHARING & dragNdrop..
    With my first mac (ibookG4) I lost all my music etc.. a lesson learned, always back up otherwise it's a long arduous task burning your cd's one by one..If you purchased your music thro' iTunes you can contact them, at times have allowed me to Re download purchased items....L

  • Question about activation key for pre-installed software after hard drive failure.

    I had a hard drive failure on my MacBook Pro last week and had it replaced by Apple.  When I restored my computer with a Time Machine backup, Office 2011 wants an activation key to start up again.  Problem is, I had Office pre-installed when I bought my MacBook by Apple.  Where do I get the activation key to get it working again?
    Thanks
    Q

    Do you still have the signons.sqlite and key3.db files from the IT setup?
    You can find the sync account password and the sync (recovery) key in the password manager on computers where a sync account with a specific e-mail address has been set up.
    Look for:
    * chrome://weave (Mozilla Services Password)
    * chrome://weave (Mozilla Services Encryption Passphrase)

  • How do I uninstall and reinstall CS3 after hard drive failure?

    Hi.  I suffered a recent hard drive failure on a Mac Pro.  I didn't have a backup, like a dummy.  The hard drive fails to boot so I installed OS on new blank hard drive and attempted to drag over whatever I could see and find from old drive onto the new one.  I tried to start CS3 after doing this but it gives me an error: "LIcensing for this product has stopped working.  You cannot use this product at this time.  You must repair problem by uninstalling and reinstalling this product or contact IT Admin or Adobe Customer support"  When I go to Utilities to find uninstall for Adobe the file is not there.  WHen I try to reinstall from disk it says "setup error; setup has encountered an error and cannot continue. COntact Adobe Customer service support for assistance".  I contacted them via chat and they told me they cannot help me and to post this issue here.  Is there a way to resolve this?  Am I just missing a file or something that will resolve the issue?  Any help would be greatly appreciated.  Thank you.

    You can't install applications like that. Use the original disks to
    install the software.

  • Rebuilding After Hard-Drive Failure

    My hard-drive failed a few months ago.  After replacing the hard-drive, I recovered my iTunes library (music only) from a back-up of the failed hard-drive.  My music now syncs between devices via iTunes Match, and I have successfully transferred all of the app and movie purchases from my devices (iPhone and iPad) to my desktop.  However, I have one movie that was downloaded to the iTunes library on my desktop post hard-drive failure using a redemption code from a Blue-Ray/DVD/Digital bundle.  How do I get that movie to upload to my iPad?  If I plug the iPad into my desktop, and I try to sync movies, iTunes tells me that this iPad is currently syncing to a different iTunes library and warns me that if I continue, everything on my iPad will be erased and replaced by the contents of this iTunes library.  I have a huge number of apps organized in folders.  I am afraid that I will lose all of those folders, and I will have to reorganize my apps if I proceed with the sync.  Is there any other way to get the movie onto my iPad? 

    You should be able to:
    Backup the device to the new installation
    Transfer your purchases into a newly authorized library
    Recover any other media using third party tools as suggested in this post from forum regular Zevoneer
    Restore the device from the backup
    This process should switch the association of the device to the new library, preserving the data and settings in your apps.
    May also be prudent to attempt a backup to iCloud directly from the device before you start... Settings > iCloud > Storage & Backup > iCloud Backup > On. It won't save any media but it would preserve the general account settings and documents in case anything goes wrong while you are trying to extract your other data.
    When you get it all fixed, make a backup!
    tt2

  • Sync after hard drive failure.

    Im at my wits end-I really am. Why on earth is I Tunes so chuffin awkward.
    Right after a hard drive failure I've now gone and purchased a refurb desktop. Fortunately on my previous I Tunes library the default location for the library was on an external hard drive.
    Following the simple instructions I transferred that music folder onto my desktop and into a folder called I Tunes Library. I then dragged and dropped that folder into I Tunes.
    I attempted to sync my I Pod but the error message was stated there was not enough room on my I Pod Touch. I found this curious because my entire I Tunes library only amounted to 47gb and my touch is 60gb.
    I found out the reason for this was because some of the the library I had imported from my external hard drive had duplicated some of the music thus making my library larger than 60gb.
    As I Tunes doesnt allow you to sync from your touch to a new I Tunes library (why???Grrrr) I completed a factory reset wiping all of my music and once again tried syncing from I Tunes.
    To my horror about a third of the library has duplicated and even after manually removing those duplicates and a lot of my music is missing from I Tunes HOWEVER on my external hard drive that missing music is showing there?
    Can anyone help??

    Hi!
    It seems that your iPhone is properly connected to the Sync server and that you need to add your computer to your previous account. In order to do so:
    # At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options. . In the Options window, click on the Sync tab.
    # Click Set Up Firefox Sync
    # Under I already have a Firefox Sync account click Connect and then select "I don't have the device with me" just below the three boxes.
    If you have already created a new account in your computer and you want to log in with your Firefox Home application, "Sign out" and set up the application again. The data you are going to lose is the one in Firefox Home. If you have restored the information in your desktop browser the data will appear in your iPhone once the sync is done.
    Unfortunately, Firefox Home doesn't have the ability to send the bookmarks stored there to your computer so if you need to restore them in your computer and you don't have the Sync Key to restore the account in your computer, your only option is to copy them manually.
    I hope this information helps you.

  • Reinstallation after hard drive failure

    I had an sneak SAP NetWeaver 7.01 ABAP installation on my laptop on which I had some important prototypes.
    I had a hard drive failure on the laptop and need to access my SAP data. I could backup from the disk after the failure though. Now I need to reinstall SAP and restart with the old database or copy all files to new harddrive.
    The simplest way would be to do a clean installation on my new laptop and then replace the maxdb database files with the files of the old installation. However, it does not seem to work since maxdb only accepts to swap files in backup format, not normal database file format...
    Does anybody have any idea on how to solve this?
    Cheers
    Martin

    Hi!
    It seems that your iPhone is properly connected to the Sync server and that you need to add your computer to your previous account. In order to do so:
    # At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options. . In the Options window, click on the Sync tab.
    # Click Set Up Firefox Sync
    # Under I already have a Firefox Sync account click Connect and then select "I don't have the device with me" just below the three boxes.
    If you have already created a new account in your computer and you want to log in with your Firefox Home application, "Sign out" and set up the application again. The data you are going to lose is the one in Firefox Home. If you have restored the information in your desktop browser the data will appear in your iPhone once the sync is done.
    Unfortunately, Firefox Home doesn't have the ability to send the bookmarks stored there to your computer so if you need to restore them in your computer and you don't have the Sync Key to restore the account in your computer, your only option is to copy them manually.
    I hope this information helps you.

  • How do I recover PE 12 after hard drive failure?

    On February 25, 2014 I purchased Adobe Premiere Elements 12. The page 'my-products-services' lists it along with all of the other Adobe products that I have purchased for my Windows 7 64-bit desktop PC.
    I have been successful in re-installing CS6 Design and Web Premium after a catastrophic hard drive failure last month; however, am presently stymied in trying to even locate where on the Adobe website it might be allowable for me to re-install. For reasons unknown, My license is listed for PE12, but my order isn't listed under account-orders.html#myorderhistory. CS6 is shown on that page and was how I was able to reinstate CS6.
    Does anybody know what I should do next?
    Gratefully yours,
    Kelly

    Kelly
    I would definitely contact Adobe via its Adobe Chat to sort out the situation with your order and Adobe's record of it. You did purchase from Adobe direct? I am assuming yes.
    What computer operating system did you download your Premiere Elements 12 to when you purchased it from Adobe?
    For contact with Adobe's Chat, please click on...
    Contact Customer Care
    Premiere Elements
    Membership, Account, Payment
    Payments, Invoices, Orders
    Chat Panel
    The link is set to that location. If the link set does not hold, then you will need to navigate to the Chat Panel using the titles as guides.
    At this moment, the Chat Panel is active and ready to be used.
    However, for the immediate situation, you can download Premiere Elements 12 tryout files from the following web site. Be sure to read and carry out carefully (to the word) the Note: Very Important Instructions on the web page so that you do not get Access Denied. You can use the download and install as a tryout or insert your purchased serial number into the installation files to make it your working copy. Assure that you are selecting the correct files as replacements specific to what you purchased.
    http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • Upgrading to 10.6 after hard drive failure

    Sorry, I wasn't sure where to put this question. I was just wondering what to I should do now that the apple retail store has backed me down to 10.5 after getting a new hard drive (my macbook happened to be one of the computers with a corrupt hard drive). I had 10.6 pre-installed when I got it so I don't have the snow leopard installation disk.

    Hi,
    Did you purchase it from new? If so, you would have Snow Leopard installation discs. If you bought it 2nd hand & it originally came with Leopard 10.5, you would need to purchase Snow Leopard.
    Ben

Maybe you are looking for