Envy120 printer won't complete shutdown mode

When my printer is turned off it will not complete the shut down process. It keeps rolling "Shutting down" The only way I can get it to stop i to unplug it. It shows its receiving wireless

Hello @sandpaul60 , and welcome to the HP Forums!
I see you are experiencing issues shutting down your printer. I'd like to help!
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest plugging the printer power into a different wall outlet.
Another recommendation would be to update the printer firmware:
Firmware Update to improve functionality and performance
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

HP 7510 AIO printer won't stay connected - Wired workstation, wireless printer

Hi! I spoke (and checked solution button) too soon. The printer still "disappears" from the Wired XP network workstation. The only difference since applying the solution given is that the disconnects are now happening about every 12 hours, vs every couple of hours.
Ink notification is set to "only when I print"
Static IP is set for all machines
HNDU works -- when the printer is visible but will hang the workstation if printer is not visible.
Original comments follow below;
HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-12-2012 03:59 PM
Printer: HP 7510
Network: multi-station wireless, thru DLink DI-632 (one PC hardwired to router)
Address Config:   Printer is using static IP -- outside of DCHP range (192.168.15.240)
Printer Config: Each computer has static IP set into the control panel app, using IP addressing.
Operating System: XP (Service Pack 3)
Other devices: Ipad, Xoom and Kindle Fire (all working using ePrint)
Network Security Protocol: WEP (we're out in the country)
Network Setup: Main router, along with 2 access ports (hardwired); currently using channels 1, 5 and 11 (again, we're in the country and have little competition for channels)
File Sharing: All machines in network have one open "share" drive, accessable with passwork.
Scenario: Wireless computers appear to stay connected for several days to a week at a time. (We reboot weekly, just as a SOP)
Computer that is wired to the network loses communication with the printer a couple of times a day and needs to be rebooted in order to restore connection.
When this happens, other machines continue to print and scan, with no problems, and the wired machine continues to have its name displayed in the SCANNING panel on the printer -- but the printer won't talk to it.   All network functions, including internet and intranet access to the printer's EWS is still available. I have noticed that if I go into check ink levels, though, that the ink check software behaves differently.
Normally in the ink status app, there is a small "working" icon with 6 dots. When this computer is connected properly, it will start jumping around the circle, showing activitiy, get to 41%, and then display the ink status info. When the printer/computer connection is not working, the "working" icon will go to just a couple of percent then jump to the printer information page, showing make, model, serial number, firmware level etc.
In every instance so far, rebooting (with no other action) brings the printer/computer connection back to life -- until next time. I am trying to find any other pattern for this behavior, just can't identify it yet.
I started out with the plain vanilla installation, but then every computer in the network would consistently drop connections, about every 45 minutes. Using the info on this forum, I've eliminated the drop-outs for those printers, and got to the Static IP solutions (we've done that anyway for years with net-ready machines). This is the last machine that "drops off" It appears that some piece of HP-required software is "dropping out" or getting clobbered, but I cannot see a pattern, even checking and noting the various software used locally on the machine, and the various websites visited. So far, no pattern.
I am hoping that an HP guru with access to the source for the "ink supply" status software can take a look at what is happening and why it will always go to 41% and then display ink status (when connected) and then only go a couple of percent and display the ink status (when it isn't connected).
Thanks, in advance,
jim
Solved! Go to Solution.
Add Tag...
Quick Reply Reply
jimzix
Honor Student
Posts: 4
Registered: 04-03-2012
Message 2 of 5 (65 Views)
Report Inappropriate Content
0
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-13-2012 01:48 PM
More info:
In last paragraph, above, the request for "ink status" is returned with a static display of the printer firmware version, driver version, step level, MAC# etc of the printer, not "ink status" when the printer is disconnected.
Also, when printer is disconnected the HP home networking utility will hang the system -- a hard reboot is required, which restores the printer, until the next time it goes "into the woods". Signal stregth, measured on the printer, is 4 bars (very good).
Add Tag...
Quick Reply Reply
007OHMSS
Master's Graduate
Posts: 1,302
Registered: 08-12-2009
Message 3 of 5 (41 Views)
Report Inappropriate Content
1
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-20-2012 09:30 AM
Not sure if this would help, some of the info could be pertinent:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&tmp_task=solveCategory&cc=us&dlc=en&la...
007OHMSS
I am a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.
Add Tag...
Quick Reply Reply
jimzix
Honor Student
Posts: 4
Registered: 04-03-2012
Message 4 of 5 (25 Views)
Report Inappropriate Content
0
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-22-2012 09:53 AM
Thanks! That appears to solve the problem. After your suggestion, I remembered that I set the "ink level warning" on this machine ONLY to "Always warn me", as opposed to "tell me only when I am printing". That seemed to be the problem. Only the computer that was set to "always warn on low ink-levels" was disconnecting -- the others worked fine! Now, all are working fine.
Just to be safe, though, I've also turned off the "scan from printer to computer" function on each computer. That was set for each machine, and seemed to work fine. The other machines in the network did not disconnect, and the printer was tracked whether each computer was on or off.   May try to turn it on later; I'll see if the family uses that feature very often!
Thank you for your help.
Jim
Add Tag...
Quick Reply Reply
jimzix
Honor Student
Posts: 4
Registered: 04-03-2012
Message 5 of 5 (17 Views)
Report Inappropriate Content
0
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-22-2012 03:56 PM
I spoke too soon! After about 26 hours, the printer connection on the one "hard-wired" CPU dropped, which is better than before, but still not solid. Same exact symptoms as before. Only piece of the puzzle that was different this time is about 50 pages were scanned, some to this computer. Used the "Scan requested from CPU" process, rather than enabling the "Scan TO Cpu" function in the software app. It did not drop the connection immediately after -- about 1 hour to 1.5 hours afterwards. Suspect this is a coincidence, not a cause of the problem with this machine.
I also scanned (same approach) from one other CPU on the network -- that wifi connection is still rock-solid.
Jim
Add Tag...
Quick Reply Reply
This question was solved.
View Solution.

I think it is fixed now.....the problem seems to reside in the module that will notify you immediately if ink is low (vs notify me only when printing). If, when initially installed, the user selects "immediately", then the printer will randomly disappear. (More on "re-finding it" later.)
Also, it is difficult to change the ink notification setting, because it appears not to be "sticky", but will sometimes, flip. (I've not figured this out yet). As long as the setting for "low ink notification" is on "only when printing", life is good.
If the printer does disappear, go over to the Advanced tab when the printer software/firmware page comes up, instead of the current ink levels. Reset the selection about "tell me about ink notification" to "only when printing", and then toggle the "autoshut off" from "NEVER" to "2 hours" and then, finally, back to "NEVER". Then, lastly, press closed on the panel. Printer should be connected again. To test, go to the Photosmart 7510 app again, and select "Show estimated ink levels". The counter will start at 1%, jump to 41% and then bounce around until it displays the ink level.
FOR HP TECH: Please consider making the "ink level notification" persistent in the registry OR provide a de-install tool that will completely clean all traces of the prior installation of the 7510 driver / app in the registry, so that a new install may have this setting saved correctly.
Hope this helps some of you -- it's an excellent printer once its running!
jim

HP LaserJet P2055dn Printer won't print the last page of documents & envelope problem

My HP LaserJet P2055dn Printer won't print the last page of documents until i send another document, then it will print the last page of the previous document, but omit the last page of the current document. I need to keep printing a blank page or any other page to get my previous documents completely printed. Also, the envelopes print with large rectangular boxes on them and no address (I don't know if this is a result of the previous stated problem or not - it started happening at the same time) I use the envelope feature in Microsoft Word 2010. I never used to have either of these problems - didn't make any changes to the system or add any software to the computer, so I know it's not that. Any help would be greatly appreciated!!

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Hp C4580 printer won't connect to wireless network, but see network is available.

I've sat through quite a few of the threads here with regard to photsmart C4580 printer not connecting to wireless network.
My issues started with a cartridge issue, which I resolved with a new cartridge, but only after trying out different solution offered on HP forum.
Now printer won't connect to my network which it has been connected to for over 2 years with no issues. The wireless network is working perfectly fine and I even printed out a HP photosmart C4500 series connectivity status and in this report printer can see the network I need to connect to.
I've tried downloading various programs from Scan doctor to complete install of all HP programs and even tried installing printer from Windows 7 "add a printer", but none can see this printer.
lastly I was hoping trying to locate IP address for printer which looks like it may help, but report says IP Address "not applicable".
I believe printer, wireless network and PC are working correctly, this there a way to switch printer to online so it can be seen.
Help would be great.

Hello there! Welcome to the forums @Cushionman ,
I noticed your post about the issues you are having with connecting the printer to your network. I am wanting to offer you my suggestion that might help you out!
Click this link and then choose Windows 7, and "Solution two: Manually resolve the issue", and follow the steps from there: The Printer is Not Found During Wireless Network Installation in Windows
Let me know the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My ipad 2 will only charge if the system is completely shutdown and it can take up too 7-8 hours to reach 100% 2 hours later I'm down to 12-13% what's wrong with it?

My grandson's IPad 2 won't hold a charge. It will only charge when the system is completely shutdown and it can take up to 8 hours to reach 100%! he's only 5 so he uses it to watch netflixs and playing games but a couple of hours after finally getting a full charge the indicater is down to 12%-13%. Keeping the system plugged up while he's using it doesn't do any good its like its not even plugged up. What could be wrong? Any assistance would be appreciated! I brought the IPad 2 in 2011 and gave it to him in 2013 when I brought myself the IPad Air...so its really not that old to be acting up...

Hi manisnana09,
If you are having issues with charging and capacity on your iPad, you may find the following articles helpful:
iPad: Charging the battery
http://support.apple.com/kb/ht4060
Apple - Batteries - iPad
https://www.apple.com/batteries/ipad.html
If you are still having issues, you may need to have your iPad serviced, or at least evaluated. You may find this page useful:
Service Answer Center - iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Regards,
- Brenden

I've downloaded Lightroom 5.6 today but it won't completely load before windows pops up and says that it has encountered a problem and is shutting the application down. What is my next step....thanks?

I've downloaded Lightroom 5.6 today but it won't completely load before windows pops up and says that it has encountered a problem and is shutting the application down. What is my next step....thanks?

If you use extensions like Adblock Plus or NoScript or Flashblock that can block content then make sure that such extensions aren't blocking content. 
You can see the installed Firefox extensions in "Tools > Add-ons > Extensions".
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Printer won't recognize new cartridge

My printer (All-in-one, 1200 series) won't recognize a new cartridge.
When the present one ran out of ink, I purchased a brand new Hp cartridge. When I installed it, it says E (error) and won't do anything. Thinking there was something wrong with this crtridge, I purchased another one....same thing.
I put in the empty cartridge, and it prints, but nothing comes out as it is empty.
Today, I called HP tech support, and they told me my printer was old and that I need to buy a new one!!!!!
Some help!
I didn't have any refill black ink, but I do have colored. I put blue ink in the empty black cartridge, and it is printing again beautifully.
Can anyone tell me why the printer won't print with the brand new cartridges????

Hey Foldy,
Welcome to the HP Forums!
For the printer not recognizing the new ink cartridge that is installed, I have included two documents for you to follow. The first one is 'Check Print Cartridge Light Blinking'. Some of the steps you have already completed, please do the steps that you have not done already.
The second document is 'The Print Cartridge Detected is the Wrong Type'. Again some of the steps you will have already completed, please complete the steps that you haven't.
If you are still having the same issue after this, please let me know if the error has changed, and what lights are blinking on the printer.
Looking forward to your reply.
I worked on behalf of HP

PSC 1510 All in one printer - won't print even black and white when colour cartridge not recognised

My PSC 1510 All in one printer is flashing the "check printer cartrige icon" and both "Black" and "Colour" icons at the bottom left of the printer.
It won't print at all, even when I select grayscale (black and white). The help pages tell me that if I remove the colour cartridge the printer will switch to backup mode and I'll still be able to print in black and white (though not copy or scan). But this is not the case, and I can find no way of switching manually to backup mode. The help pages have no useful explanation of backup mode. I've also tried cleaning the cartridge (which I'm pretty sure isn't empty) but that makes no difference.
Can anyone help? I'd be very grateful.

gabri21 wrote: I have a very similar problem with my PSC1510 but only the colour cartridge light is blinking. I am also unable to find any useful information to set up printing in back up mode. Can anyone assist in resolving this problem for us?
With only one cartridge light blinking I would suspect the cartridge, they do rarely fail (much more often for reman cartridges, see here). Clean the cartridge contascts as shown here. If that fails and the cartridge is an original HP then check the warranty date as shown here. If the cartridge is in warranty return it to your dealer for a warranty replacement.
The printer will automatically switch to backup mode if the black (or color in some printers) cartridge is removed. I do not know if this works with the PSC 1510, some all-in-on devices insist on having both cartridges present.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

BB Torch keeps trying to reboot and won't complete

Anyone had this experience and found a solution??
I clicked a link from Drop Box to install application and it immediately shut off my BB Torch and it has been trying to reboot ever since but won't complete reboot. It gets to about 70% on the progress bar and shuts off again repeatedly. Tried hard and soft reboot and it didn't help.

When you get a chance, do a battery pull. When the red light goes away on the front of the phone, hold down the
back button the entire time while the phone is booting up. When the boot is complete, the phone will enter safe
mode.
http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB17877
Remove the app and do another battery pull.
if you can't get past that, you will have to reload the device software on the phone.
http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
or
force the detection of the BlackBerry smartphone using Application Loader
http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB10144
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Firefox won't complete url names even though remember history is checked, firefox was reinstalled

Type in Yah but Firefox won't complete Yahoo...even if I have just been in Yahoo previously. History option IS enabled. This is recent problem. Tried to fix by uninstalling, by system restoring.
Before I was cut off from Chat (because the chat time of 1 PM was reached), attendee ask me to check error message. Almost all the errors were like the below.
Uncaught exception: [Exception…”Component returned failure code:0x80004003
(NS_ERROR_INVALID_POINTER0 [nsIDOMLocation.href]” nsresult: “0x80004003
(NS_ERROR_INVALID_POINTER)” location: “JS frame :: chrome://kosa/content/af.js :: <TOP_LEVEL> :: line 21” data:no]

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Lemark C510 printer won't wake up

I have a Lexmark C510 printer that won't wake up when I try to print to it. It is connected to the computer via a USB port. The problem is computer and OSX version independent. I have to turn the printer off, then back on in order to send a print job to it. If I wait to long to print and the printer goes into power saver mode, I have have to turn it off and on again. Other printer I use do not have this problem. I have installed the most recent print driver. I can download a file from the Lexmark site called 891012.FLK (a firmware update) but have no idea how to install it. Anyone have any idea?
Thanks

Hello Again MaceWindu,
Which of the drivers listed on this website Lexmark C510 Mac OS X Drivers, have you installed?
The C51X.ZIP: Network firmware for C510 file that you referred to, is for the change to DST;
"The primary purpose for these releases is to account for the new 2007 DST changes that will be effecting AST, EST, CST, MST, PST, Alaska, and Newfoundland time zones."
So I suspect, installing that, may not resolve the problem.
ali b

5510 printer won't wake up

If I go for a while (a day or more) without printing, the printer will go into "sleep" mode and I can't get it to "wake up" without unplugging it and plugging it back in. The touch-screen doesn't do anything, I can't even hold the on/off button and get it to either turn all the way off, or start up. The computers show its status as offline. Am I missing something obvious here? How do I get it to wake back up again? Thanks,Alex

There a couple of things I would try: First, if it is plugged into a power strip/supressor, plug it directly into a power outlet. Reduced voltage/amperage can make some electronic equipment act strangely. Second, if that didn't help, try this:With the power on, remove the ink cartridges. While still on, then remove the power cord from the back of the printer. Wait at least 30 seconds, then reconnect the power cord. Turn the printer on, reinstall the ink cartridges one at a time, closing the access between each one to make sure the printer recognizes each individual one. Once that is complete, power cycle the printer with the power button. That seems to help set a printer somewhat to basic operation in some cases.

Print landscape report in character mode

Hi!
It seems that I should change xxx.prt file in DESFORMAT parameter to match different kinds of printers in order to print landscape report in character mode.
Our customers are international wide. How can I do to make this setting meet every customer for printing reports in landscape style?
We will run the reports on Unix on the middle tier and customers read them in browser.
Thanks for help.
null

Hi,
This sounds like a similar problem that I had (and still having). It was (is) a Bug. Go to metalink.oracle.com and reference this bug#1413754. See if this is your problem as well. My only work around was change the format of the file instead of using character mode I am now using PDF. Which is working fine for me.
~Vannette

How to print the script in condensed mode

Hi to all,
Pls help me.
How to print the script in condensed mode and particular window only print in the condensed mode.

Hi,
Hi
It will remove the blank spaces in front of the variable
and if you use the extension NO-GAPS
It will remove all the blank spaces in the variable field.
DATA: ws_val1 type char12.
ws_val1 = ' 100 123'.
Condense ws_val1.
Write / ws_val1.
Condense ws_val1 no-gaps.
write / ws_val1.
It will give output as
100 123
100123
The CONDENSE statement deletes redundant spaces from a string:
CONDENSE c NO-GAPS.
This statement removes any leading blanks in the field c and replaces other sequences of blanks by exactly one blank. The result is a left-justified sequence of words, each separated by one blank. If the addition NO-GAPS is specified, all blanks are removed.
Please check this link for sample code.
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb33e6358411d1829f0000e829fbfe/content.htm
Regards,
Raj.

Printer won't print too- need a new printer head. i want to know if you have one in stock

Hi, my printer won't print and the error message states "bad printerhead". My printer model is HP officejet d 155xi. I need to know how much it costs or would it be cheaper to buy a new printer. Still have four cartridges of ink. Please advise. Thanks.

HI,
You can find the General prices for the printheads HERE, if you only have to replace one its ok, but keep in mind that the other printhead are likely to be just as old and might break down as wel.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Envy120 printer won't complete shutdown mode

Similar Messages

Maybe you are looking for