ENVY14, started getting, "this copy of windows is not genuine" message. Spoke with HP tech,
ordered and received system recover DVD. Backed up hard drive. Now getting message, "windows has detected a hard disk problem." System recover will not start, just receive the hard disk problem message. and continue to receive the windows not genuine message. Computer very slow to boot but seems to be working properly? Is hard drive defective? Why won'tsystem recovery work?
A slow booting operating system tells me that the hard drive may be starting to fail. I would run a hard drive diagnostic using the built in self test. Here is a link on how to run the self test on the drive: http://goo.gl/pVHxW
If it fails your going to need to get a replacement drive. If it passes I would guess that something is corrupt, but post back with more details after the test and we will go from there.
Thanks,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
Similar Messages
-
Re: "This copy of Windows is not genuine" message
Hello, this morning the following message appeared as my wallpaper:
"Windows 7
Build 7600
This copy of Windows is not genuine"
Windows came pre-installed on my laptop (i.e. is genuine).
I searched Microsoft, their solution is to run rsop.msc - when I try to do this, I am given the message 'Windows cannot find 'rsop.msc''.
Can anyone help?
Many thanks in advance.Hi
Toshiba preinstalled image is already activated and does not need to be activated again
Also the serial key at the bottom of the unit will not help you. It belongs to the image (OEM version) which is already installed and activated -
"Build 6002: This copy of Windows is not genuine"
Hi everyone..
I have had my TOSHIBA Satellite L40-139 for over a year. It was bought from PC World and came with a pre-installed version of Windows Vista Home Premium. I do not have any of the disks that came with the laptop but the Windows installed is genuine.
I went to install Vista Service Pack 2 having downloaded it. I restarted my laptop only to find my desktop wallpaper had gone and been replaced with a black background and the following in the bottom-right corner of the desktop:
Windows Vista (TM)
Build 6002
This copy of Windows is not genuine
This was followed by a pop-up window with two options, 'Activate Now' or 'Activate Later', followed by an error pop-up that says Windows must be re-installed as an "Unauthorised change has been made...please insert CD or DVD". If I press 'Activate Now' it just goes to another pop-up that says I can contact TOSHIBA. If I click the link it just goes to a standard 'Help' screen!
I don't know what to do..I have the COA product key sticker intact and have tried entering it but it just comes back with various errors. It's as if as soon as I installed service pack 2 I've had problems. Again I do not have Vista or a toshiba recovery disk (I don't even know if it came with one). I have tried restoring Windows but it just returns with the same screens!
HELP!!
PS. Is the Toshiba support line a free number? Does anyone know a number that is free to call from mobiles? (I do not have a landline).> As per my first post I do not have a Recovery DVD as mine didn't come with one..I take it I must be doing something wrong and there is another way to sort this? Even the Toshiba product spec states that no recovery DVD comes with it.
As per my first posting I wrote clearly that new notebooks dont come with recovery discs but with HDD recovery only and you must create recovery disc alone. Everything is described in Users manuals document. If you dont read it and dont pick up info about your notebook I cannot help you about it.
If you cannot start HDD recovery installation as described in Toshiba document then something must be screwed up. Why? I dont know.
You can try method posted by Paolo but if this will not help you must install OS again or activate preinstalled version. If you dont have possibility to install original recovery image you can order new disc under https://backupmedia.toshiba.eu/landing.aspx or try to clarify situation with nearest Toshiba service. Call them, explain the situation and maybe you will get one for free.
Sorry but I dont know what else to say. -
Windows 7 - Build 7601 this copy of Windows is not genuine
Hello everyone.
Im a newbie here so i hope i get this right.
I have a question about this message on my desktop reading "Windows 7 Build 7601 this copy of Windows is not genuine." ????
I bought this Satellite c660 at Qatif, Saudi Arabia and now it is here in the Philippines.
My laptop is Windows 7 Professional 32-bit. It is asking for a product key and i cannot find one. There is no product key sticker in the bottom and i dont know where to get that.
I've run a diagnostic and i hope this helps.
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 50
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-CM74G-RPHKF-PW487
Windows Product Key Hash: 71BRYMECVaSXedfumfu8zryHJVY=
Windows Product ID: 00371-177-0000061-85062
Windows Product ID Type: 5
Windows License Type: Retail
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {1E8191EC-15C9-4DC3-8886-55DD7BBA8D84}(4)
Is Admin: No
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.111118-2330
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 103 Blocked VLK
Microsoft Office Enterprise 2007 - 103 Blocked VLK
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{1E8191EC-15C9-4DC3-8886-55DD7BBA8D84}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.048</OS><Architecture>x32</Architecture><PKey>*****-*****-*****-*****-PW487</PKey><PID>00371-177-0000061-85062</PID><PIDType>5</PIDType><SID>S-1-5-21-3557145390-3644324294-2060978674</SID><SYSTEM><Manufacturer>TOSHIBA</Manufacturer><Model>Satellite C660</Model></SYSTEM><BIOS><Manufacturer>TOSHIBA</Manufacturer><Version>1.60</Version><SMBIOSVersion major="2" minor="5"/><Date>20110707000000.000000+000</Date></BIOS><HWID>4B8C3E07018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Korea Standard Time(GMT+09:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>TOSCPL</OEMID><OEMTableID>TOSCPL00</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>103</Result><Products><Product GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>103</LegitResult><Name>Microsoft Office Enterprise 2007</Name><Ver>12</Ver><Val>ACD7202654E586</Val><Hash>fFic3JgCreGGRxyF8uMWB4R4Jcg=</Hash><Pid>89388-707-1528066-65261</Pid><PidType>14</PidType></Product></Products><Applications><App Id="15" Version="12" Result="103"/><App Id="16" Version="12" Result="103"/><App Id="18" Version="12" Result="103"/><App Id="19" Version="12" Result="103"/><App Id="1A" Version="12" Result="103"/><App Id="1B" Version="12" Result="103"/><App Id="44" Version="12" Result="103"/><App Id="A1" Version="12" Result="103"/><App Id="BA" Version="12" Result="103"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Input Error: Can not find script file "C:\Windows\system32\slmgr.vbs".
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
HealthStatus: 0x0000000000000000
Event Time Stamp: 3:15:2012 19:39
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: MgAAAAEAAgABAAIAAAABAAAAAwABAAEAJJT+lnD3en8mEX4nsL +8NxRgtMToxMDARso=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: no, invalid SLIC table
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC PTLTD APIC
FACP TOSCPL CRESTLNE
HPET INTEL CRESTLNE
BOOT PTLTD $SBFTBL$
MCFG INTEL CRESTLNE
OSFR TOSHIB A+2nd ID
SLIC TOSCPL TOSCPL00
SSDT BrtRef DD01BRT
SSDT BrtRef DD01BRT
PLEASE anyone help? I am not a techie person and i dont know how to fix this problem. Thank you and regards.Now, this is pretty complicated for me to understand but one thing is just clear, this is counterfeit. I have asked help from other Windows7 forums and all they tell me is to report this to Microsoft.
MANY people have counterfeit installs - very few of them actually know it! And im one of them.
A large proprtion of counterfeiting is done b vendors who can make a quick buck by buying/building OS-free machines, and installing 'Ultimate' to unsuspecting purchasers.
Another thing is that I cannot see any COA sticker anywhere my unit.
I used a keyfinder softwareto find my product key but it's not valid for activation since the key used in here is a Default Key. is is getting worst.
I am not very good with this technology stuff and im getting really frustrated.
Is it possible that if i upgrade my system to Windows 8, and use a legal purchase, will i be able to get rid of this "Windows 7 Build 7601 this copy of Windows is not genuine." thing???????
Please help. Thank you. -
Hi,
Few days ago I got the blue screen and after reboot I got the message ""This copy of windows is not genuine.Build 7601". Error code 0x8007007E.
I tried to restore the system to a previous state but it didn't work.
Now, after rebooting I log in and all I get is a black screen with a small text in the right low corner as mentioned. No other command works.
How can I recover the system without reinstalling windows?
Product number: VM115UA#ABC, G71-333CA, Windows 7
Thank you,
Dan
This question was solved.
View Solution.podan wrote:
What is the difference between a purchased recovery disk and the ones that I created?
I don't understand why HP installs a different key than the label one. Why bother to place a label with a product key that is not real? I would have knew about all this twist I would have bought a proper Windows licence (at least I would have had the installation kit) and laptop without all the HP useless applications (which proves that if you are in trouble they cannot help at all).
Thank again,
Dan
1. Recovery discs from HP perform the same recovery but take longer to do the recovery than the one's you make yourself.
"HP shipped media covers multiple series and many different configurations. (One set of discs may cover a series that has 10 or even many more unique configurations)
Because of this the process first lays down a 'base' image, and then customizes the image for that specific configuration.
The F11 and customer created media recoveries are specific to that model PC, and are quick because it is laying down an image that is designed only for one configuration.
The last phase of the HP shipped recovery is installing and customizing the software for that specific model. This last phase can take a very long time, can have popup windows (that should not be clicked), and can involve multiple reboots. Specifically around 12%-19% on the display is where this occurs.
Please don't interact with the PC during this time.
Don't click on any popups unless the system completely stops for significant time.Unless there is a unknown error, the recovery process is actually designed to handle this.
For notebooks, this process can take 4-6 hours on certain configurations."
2. All OEM PC manufacturers use what is called a Volume License Key (VLK), it makes it much easier to install and activate 10's of millions of Windows installations. By Law they have to give your a Single User License key because you paid for the OS when you purchased the PC, so they put that key on the sticker, this is an Industry wide standard. -
Error: Windows 7 Build 7601 This copy of Windows is not genuine
This ThinkPad 4270 was new in April 2012. About 2 weeks ago, the Error message: Windows 7 Build 7601 This copy of Windows is not genuine started appearing.
The Lenovo help desk in Atlanta is of no help. Their job is only "hardware," they say. I have paid Microsoft techs to fix the problem. Three of them have tried everything from running malware and antivirus software to making a registry change.
The "fix" lasts for only a few hours, during which time the message disappears and then, for no known reason, reappears.
I have discussed this with Norton techs and can't find anyone who can either explain or fix the problem. Everything works just fine--the error message just comes up. If I run the MS Validate program it disappears for a while, then reappears.
Also I have had a problem with the fingerprint reader from the time I first received this computer.
I have read postings on the error online on various boards. People have ideas about everything from a virus to a "race" issue with competing anti-virus software. I've had the online "experts" look at the computer and no one can really state the problem.
Do any of you have any experience with this? Any ideas of a real cause and fix?
Everything works just fine--just have the error message.
Thanks for sharing any ideas.
Solved!
Go to Solution.It's possible that the license storage is corrupt. Try this:
1) Click the Start button at lower left of your desktop
2) Type: %windir%\system32 into the search window.
3) Find the file CMD.exe
4) Right-Click on CMD.exe and select 'Run as Administrator'
5) Type: net stop sppsvc (It may ask you if you are sure, select yes)
Note: the Software Protection service may not be running, this is ok.
6) Type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform
7) Type: rename tokens.dat tokens.bar
8) Type: cd %windir%\system32
9) Type: net start sppsvc
10) Type: slui.exe
11) The Windows Activation dialog will appear. You may be asked to re-activate and/or re-enter your product key or Activation may occur automatically.
If you have a Product Key, reactivate Windows by following these steps:
1. Click the Start button
2. Type: slui.exe 3 and hit the Enter key
3. Type in the Product key from the sticker on your computer
4. Click the Next button.
5. You will be asked if want to Activate, click ok
You can also activate by phone by following these steps:
1. Click the Start button
2. Type: slui.exe 4 and hit the Enter key
3. Select your location in the drop down menu and click the Next button
4. The next screen provides the number to call to Activate by Phone
How to contact a Microsoft Product Activation Center:
http://support.microsoft.com/default.aspx/kb/950929/en=us
Please let the board know if either of these methods worked. Good luck
T520 4239-CTO
T61/p 6459-CTO (Gone but not forgotten)
A31/p XP Pro 1 gig memory
A30/p XP Pro 1 gig memory
TP600 Win 2K 288 mb memory
701C Win 98 Don't ask -
My computor has a message that says this copy of windows is not genuine. Please Help
My computor shut down and I called the lenovo help centre.I was then told that as my computor was not responding that I would have to return it to its factory default settings. The guy told me to turn off the computor and then press f11 and hold while turning it back on . I now see the message on the screen windows vista build 6001, this copy of windows is not genuine. I dont know what to do and the people at lenovo refuse to help me. Can someone please tell me what to do as Im not very computor litterate.
You can try this, i have see it on another french forum
(in a command line - cmd)
enter
slmgr -ipk XXXXX-XXXXX-XXXXX-XXXXX where XXX... is your licence N°, you find it on the Microsoft sticker
then enter
slmgr -ato
for activation
Message Edited by erbscr on 01-22-2009 12:00 PM -
How to resolve error message 'Windows 7 Build 7601 This copy of Windows is not genuine'
Hi
I have the following error message on my computer 'Windows 7 Build 7601 This copy of Windows is not genuine'
I have already spoken to a HP expert via telephone, and they aked me to continuously press the F11 button whilst switching on my laptop (Pavillion dm1)
It says I should see a grey bar with the text Windows is loading files on a blue screen however this does not come up on my screen.
Please can you help.
Many thanksTry the steps in the following weblink/Video:
http://www.youtube.com/watch?v=NmBYK-vwCfI
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!*** -
Windows 7 build 7601 this copy of windows is not genuine how to solve this
my new pc is showing the messege windows 7 Build 7601 This copy of Windows is not genuine
how to solve the issuehttp://h10025.www1.hp.com/ewfrf/wc/document?docname=bph06642&tmp_task=setupCategory&cc=us&dlc=en&lc=...
click on the above link and follow the steps for activating.
I work for HP, please click the kudos star on left side to say thanks.
If it works reply back saying as a solution so that it helps others. -
"Error: Windows 7 Build 7601 This copy of Windows is not genuine" keeps popping up
hi,
we have recently been getting the windows not geuine message and our desktop has gone black,it says that we should activat windows but the avtivation code has worn off the sticker at the bottom of our g550.
hope you can helpIt's possible that the license storage is corrupt. Try this:
1) Click the Start button at lower left of your desktop
2) Type: %windir%\system32 into the search window.
3) Find the file CMD.exe
4) Right-Click on CMD.exe and select 'Run as Administrator'
5) Type: net stop sppsvc (It may ask you if you are sure, select yes)
Note: the Software Protection service may not be running, this is ok.
6) Type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform
7) Type: rename tokens.dat tokens.bar
8) Type: cd %windir%\system32
9) Type: net start sppsvc
10) Type: slui.exe
11) The Windows Activation dialog will appear. You may be asked to re-activate and/or re-enter your product key or Activation may occur automatically.
If you have a Product Key, reactivate Windows by following these steps:
1. Click the Start button
2. Type: slui.exe 3 and hit the Enter key
3. Type in the Product key from the sticker on your computer
4. Click the Next button.
5. You will be asked if want to Activate, click ok
You can also activate by phone by following these steps:
1. Click the Start button
2. Type: slui.exe 4 and hit the Enter key
3. Select your location in the drop down menu and click the Next button
4. The next screen provides the number to call to Activate by Phone
How to contact a Microsoft Product Activation Center:
http://support.microsoft.com/default.aspx/kb/950929/en=us
Please let the board know if either of these methods worked. Good luck
T520 4239-CTO
T61/p 6459-CTO (Gone but not forgotten)
A31/p XP Pro 1 gig memory
A30/p XP Pro 1 gig memory
TP600 Win 2K 288 mb memory
701C Win 98 Don't ask -
This copy of Windows is not genuine Build 7601
Some time ago, malware damaged my windows 7 professional by making it not genuine(I keep getting those annoying pop-ups). I've discussed this subject in length on the windows support forumn, but still haven't fixed the problem. My PC came installed with windows 7 professional, but only came with windows 8 professional disks. I was told that my PC had downgrade rights for windows 7 professional thats why it didnt come with windows 7 disks.
I don't have a backup for my pc so even if I went through the trouble of finding a system locked preinstallation key i still might not find one and was told, from previous discussions, that it might not even work. I have only a few simple options left to fix this problem.
I could restore my pc to an earlier date, but unfortunately i dont have a restore point that goes back far enough.
Unless there is a way for me to restore to factory settings the only option i have is to somehow obtain windows 7 professional dvds from Lenovo, but unclear as to how much it would cost me or how to go about getting them. Also i wonder if those dvd's would do everything that my windows 8 disks would do such as reinstalling my Lenovo software, for example. My pc is a ThinkCentre M series desktop.
Any help on this subject would be appreciated.http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph06642&tmp_task=setupCategory&cc=us&dlc=en&lc=...
click on the above link and follow the steps for activating.
I work for HP, please click the kudos star on left side to say thanks.
If it works reply back saying as a solution so that it helps others. -
Windows 7 Ultimate Build 7600 This copy of Windows is not genuine
Hello,
I have a Lenovo desktop that I installed Windows 7 Ultimate on last fall. I obtained my legal copy of Windows 7 from Tiger Direct as a promotion that was giving away copies of Windows 7. I still have the envelope and installation cd, the installation cd looks
just like another copy of Windows 7 I got from Microsoft. I have been installing updates since the installation last fall. The message appears in the lower right hand side of my desktop screen.
According to a thread that I read a couple weeks ago, I checked my Updates and found that I have two Windows Updates that do not have Publishers. The updates are kb958488 and update kb 971033.
Any ideas on how I can correct this?
Thanks,
Peterhi Andre, i had the same problem. these are the results,
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 50
Cached Online Validation Code: 0xc004c4ab
Windows Product Key: *****-*****-X92GV-V7DCV-P4K27
Windows Product Key Hash: aU2z1/fnhnLHmhBm699qYZT2E6s=
Windows Product ID: 00426-OEM-8992662-00400
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7600.2.00010100.0.0.001
ID: {135ACAAF-62BA-4CED-9BBE-EAAA3B56CE09}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7600.win7_gdr.130318-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{135ACAAF-62BA-4CED-9BBE-EAAA3B56CE09}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7600.2.00010100.0.0.001</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-P4K27</PKey><PID>00426-OEM-8992662-00400</PID><PIDType>2</PIDType><SID>S-1-5-21-666988617-2036336794-587057917</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Inspiron N3010</Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A09</Version><SMBIOSVersion major="2" minor="6"/><Date>20101018000000.000000+000</Date></BIOS><HWID>45BB3607018400FC</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Malay
Peninsula Standard Time(GMT+08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL </OEMID><OEMTableID>QA09
</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7600.16385
Name: Windows(R) 7, Ultimate edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00178-926-600400-02-1033-7600.0000-0112012
Installation ID: 019624432716018062731135949545268905986324889016121652
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: P4K27
License Status: Notification
Notification Reason: 0xC004F200 (non-genuine).
Remaining Windows rearm count: 2
Trusted time: 2/9/2014 11:45:24 AM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C4AB
HealthStatus: 0x0000000000000000
Event Time Stamp: 2:9:2014 01:42
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: MgAAAAEAAgABAAEAAQABAAAAAwABAAEAeqjgZE40rnSIgox8aLreiHIN4EQ8M+6NXF0=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value
OEMTableID Value
APIC PTLTD
APIC
FACP INTEL
CRESTLNE
HPET INTEL
CRESTLNE
BOOT PTLTD
$SBFTBL$
MCFG INTEL
CRESTLNE
SPCR PTLTD
$UCRTBL$
SLIC DELL
QA09
OSFR DELL
DELL
ASF! CETP
CETP
SSDT PmRef
CpuPm -
Vista Build 6002 "This Copy of Windows is Not Genuine"
So I bought a computer over a year ago from Best Buy when my last one died. It's a laptop that, while it isn't going to ever run brilliantly, serves its purpose as a 2d art editor/internet surfer.
My problem?
My copy of Vista suddenly decided it wasn't genuine.
My sticker with the serial key is illegible; it's been over a year, and I left it on the bottom of the computer without paying any attention to wear and tear (until I realized -- hey, my computer has LOST ITS MIND.)
I don't really have a desire to do a factory-restore type wipe, but at the moment, that appears that it might be the only option.
It isn't likely that Best Buy gave me a cracked copy of Vista (I'm just assuming, here) but visiting other sites, I've discovered that other people who purchased from Best Buy ALSO had this problem.
*What* is going on?Trust me, if it's a virus, it's the cleverest little virus that ever was -- I ran just about every scan that I could throw at it, and I'm pretty careful with where I go/what I do and download. (Usually I'm the one cleaning malware off my friends' computers; I know what to look for in general, as well as what to avoid).
I do have an extended service plan. I took it in to Best Buy today and they told me, oh so helpfully, that the sticker on the bottom was unreadable, and there was nothing that they could do, but that they reccommended essentially wiping it to factory settings, which is what I'm actually trying rather desperately to avoid. (I have wayyy to many programs/preferences that I have no desire to reinstall).
I would never have bought Vista if I'd had a choice; it was literally the only option I could afford at the time that I bought the computer. I would've paid to downgrade, but this computer doesn't run XP -- the drivers are incompatible, or somesuch reason. (I considered using nLite and making a custom XP install, but I wasn't sure I was up to it, and it wasn't worth buying an extra license for it if I wasn't sure it could handle it.) At the time that I bought it, Windows 7 was still unavailable to the general public. -
compaq pc sr5109uk operating system Vista.
Trust me, if it's a virus, it's the cleverest little virus that ever was -- I ran just about every scan that I could throw at it, and I'm pretty careful with where I go/what I do and download. (Usually I'm the one cleaning malware off my friends' computers; I know what to look for in general, as well as what to avoid).
I do have an extended service plan. I took it in to Best Buy today and they told me, oh so helpfully, that the sticker on the bottom was unreadable, and there was nothing that they could do, but that they reccommended essentially wiping it to factory settings, which is what I'm actually trying rather desperately to avoid. (I have wayyy to many programs/preferences that I have no desire to reinstall).
I would never have bought Vista if I'd had a choice; it was literally the only option I could afford at the time that I bought the computer. I would've paid to downgrade, but this computer doesn't run XP -- the drivers are incompatible, or somesuch reason. (I considered using nLite and making a custom XP install, but I wasn't sure I was up to it, and it wasn't worth buying an extra license for it if I wasn't sure it could handle it.) At the time that I bought it, Windows 7 was still unavailable to the general public. -
This copy of Windows is not genuine
This message keeps showing up on desktop, and goes away after clicking on Computer properties where it shows that it's already activated.
Hi lenssd9!
How about some of the solutions in the community like this or this?
Tell us how it goes!
I don't work for Lenovo. I'm a crazy volunteer!
Maybe you are looking for
-
Unable to load the following resource: Error: too many columns- form won't
Hi .. Can you please suggest on the following error, which i am facing the issue while opening data form in Hyperion Planning 11.1.1.4 . Unable to load the following resource: Error: too many columns- form won't Regards, Vasu
-
STMS Import queue Fails - FTP_FAILED
Hi All Stms import queue fails with the following error message System BWP Command TMS_MGR_TRANSMIT_TR_QUEUE Client 001 Service Transport Service User SAPBASIS Start Online Date 14.05.2009
-
ServletRunnerInfo not found in configuration file for ABCServlet
Hello, I have created an iplanet web application which contains 2 servlets and some JSP files at Visual Cafe. After I deployed the web application war file at the iplanet server and run the site, I can access the first servlet without any problem, bu
-
Import myclass; Not Work in JDK1.4 Why?
Dear friends I make one Bean in which i import one class import EnquiryPK; This statement works fine in JDK1.3 but Now i shifted to jdk1.4 So during compilation i got following error EnquiryBean.java [10:1] '.' expected import EnquiryPK; So can u giv
-
Dictation not working in some program windows
I have an electronic medical record (EMR) that I use in my office on my Macs. I am running Mavericks. At first dictation worked inside a note inside the program, and then it stopped. It still works outside this specific program. I suspect that the E