Envy5530E will not install drivers win7

I have an ENVY 5530E that will not install the driver on a gateway computer that was upgraded to Windows 7 32bit from Vista. I have applied tha patch, but it still fails at almost the very end, then rolls back the entire installation. There are no error messages or codes displayed . Need a push in some direction.
This question was solved.
View Solution.

Hey Rwstalzer,
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing again.
Let me know.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • C4780 will not install in win7

    My two HP Photosmart C4780 Printers will not install in windows 7 32bit or 64bit.  I tried 3 different computers
    utilizing the specified software PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe
    And the computers refuse to install this driver under win7.
    On windows xp, these same printers install without any difficulty.
    This question was solved.
    View Solution.

    Hi Ka6eegdon,
    I thought that maybe this document would help make sure that the uninstall is complete.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-122272-1&cc=us&dlc=en&lc=en...
    Open Windows Update by clicking the Start button . In the search box, type Services, and then, in the list of results, click Windows Installer. Check to see if it is Manual or Automatic.  and if the service has been stopped.  Should say Windows installer Status type(in the middle of page) :Automatic 
    Service Status should say Started.
    Then try reinstall downloading from  www.hp.com/support.
    Please reply if you have other questions.
    Thank You 
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Remote Viewer will not install on Win7 64

    I can not install novell-zenworks-rm-viewer-11.2.2.12992.MSI on Windows 7 64. The error says "A network error occurred while attempting to read from the file. I've downloaded it several times attempting to install. I've tried to save it and then install it. Tried to install it directly from the download. I can not even find any other versions to download and try to install on the Novell web site. If I do this from a Windows XP 32 computer I have no issues at all.

    Make sure you are using the 32bit version of IE not 64-bit.
    On 3/16/2013 1:46 PM, ktlmn wrote:
    >
    > I can not install novell-zenworks-rm-viewer-11.2.2.12992.MSI on Windows
    > 7 64. The error says "A network error occurred while attempting to read
    > from the file. I've downloaded it several times attempting to install.
    > I've tried to save it and then install it. Tried to install it directly
    > from the download. I can not even find any other versions to download
    > and try to install on the Novell web site. If I do this from a Windows
    > XP 32 computer I have no issues at all.
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • IPod will not install drivers on Windows Vista

    Hello,
    I am running Windows Vista Ultimate on 2 computers. One computer connects to my 60GB iPod video just fine, while the other looks for drivers and then fails to find any. I get a window that pops up saying "Insert the disc that came with your iPod" after Windows searches for drivers. Because of this, the iPod does not appear in iTunes, nor does it appear in My Computer. I have tried performing a soft reset on the iPod (Menu/Center combo) which did not work. I have also tried reinstalling iTunes to no avail. This is a brand new Windows installation and I just can't figure out why it won't work. iTunes seems to work just fine in all other respects.
    I have also followed the steps in this article:
    http://docs.info.apple.com/article.html?artnum=305136
    Thanks,
    Brian

    I found these steps here: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1286482&SiteID=1&pageid=4
    Scroll down to the quote from WickedMX.
    Basically, C:\Windows\System32\Driverstore\Repository and look for a folder that starts with usbstor. You will probably have two different versions. Open the folder that is the newest version and then copy the files usbstor.inf and usbstor.PNF. Copy them to the C:\Windows\INF folder. Try installing your device(s) again and it should work like a charm!
    Brian

  • Premiere Elements 11 will not install in win7 64-bit

    I am trying to install Premiere Elements 11 on a Win7 64-bit machine. I did it last year on another machine just like it, but now I get an error message saying it won't work in 64-bit. The license is valid and paid up. Can I get a new link to a fresh install file?

    if you follow all 7 steps you can dl a trial here:  http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
    and activate with your serial.
    if you have a problem dl'g, you didn't follow all 7 steps.  the most common error involves failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).

  • Itunes 10.5 64bit will not install on Win7

    I get a "There is a problem with this Windows installer package..."

    I was having the same issue.  Heres what I did:
    1. Uninstalled itunes.  (dont worry this does not delete your music or media)
    2. restart
    3. if install doesnt work, go to control panel > Uninstall program > left click on Apple Update Software so that it's highlighted > Click on Repair at the top.   
    4. Wait until the process is complete and then try reinstalling.  Worked for me after that.
    The old Apple Update Software must not be communicating very well with the new itunes software.
    Good luck!

  • Windows 7 64 bit OS will not install any HP print drivers

    My HP Pavilion p7-1297cb pc which is running windows 7 home premium 64 bit OS will not install any HP print drivers. All my windows updates are current, HP print and scan doctor did not fix it, I also tried MS fix it manager and did not work.  When I try to use my HP Officejet Pro 8500A Plus installation CD or HP's download center, software almost installs, but says print drivers will not install.  Also, I tried using USB connection and windows tries to install software, but does not work.  Same for HP print driver support.   I tried installing 3 different HP printers I had and all had the same issue. Any ideas on why my system will not allow any print drivers to install?

    Hi rrfhp,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand none of the HP drivers will fully install.
    I will be happy to help you.
    Are you signed in as the Administrator of the computer?
    I would turn off all start up programs to make sure there isn't something blocking the printer.
    Click on start, in the search box type in run, enter, then type in msconfig, click OK.
    Click the Services tab.
    Click to select the Hide All Microsoft Services check box.
    Click Disable All, and then click OK.
    Then click on the start up tab at the top.
    Click on disable all.
    Reboot the computer.
    Temporarily turn off any Antivirus software.
    Then run the installation again by right clicking on the setup and selecting run as Admininstrator.
    Don't connect the USB cable until prompted.
    Try printing now.
    Then go back into msconfig and enable the All Microsoft Services and enable all on the start up tab.
    Turn the Antivirus software back on again.
    Please let me know the results if you are still having issues.
    Are you getting any error messages?
    Thank you for posting on the HP Forums.
    Have a nice day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How to install 3.1 Drivers when 3.0 will not install

    I am trying to install the Boot Camp driver on Windows 7 Home Premium 64 bit.
    The 3.0 Drivers on the Snow Leopard DVD will not install, which makes perfect
    sense because Windows 7 64 bit was not supported at the 3.0 revision level.
    But I cannot run the 3.1 update, because 3.0 was never installed.
    Is there a way to just directly install the 3.1 drivers without 3.0 being
    installed first? Or to force 3.0 to install even though the drivers installed
    won't actually work?

    No answer here either, but I want to chime in. My MBP i7 came with BootCamp 3.0.5 already installed, but the 3.1 drivers for Windows 7 won't execute properly because they claim that they need BootCamp 3.x.

  • Canon 5030 advanced printer drivers will not install on my hp dv6000 laptop

    my  company is trying to install their canon 5030 advanced printer drivers onto to dv6000 laptop so i can print at work and they will not install.  there are no error messages it just won't install.  i do not, cannot get a new laptop. i need to make this work. HELP
    my os is xp  sp2 with most recent updates installed.

    You would probably get better luck with your question if you post this on the HP Notebook board as this board mainly deals with hp printers and the Notebook board will help with your HP Laptop.
    Good Luck !
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Drivers will not install from original disk

    Ok, so i have a early 2008 MBP, which i just installed Boot Camp on. After a tedious install of windows, I got it to work, now to have the drivers get messed up. What happens is it will start installing the Drivers and then usually (it stops at different times) will get to the audio drivers before it just spins the disk for about a second then stops, then spins it again, and repeats this process infinitely or until I turn off the computer. The disk will not eject, and boot camp install will not end. Can you help me get past this, because I really would love to finish the install! As i said the farthest it has ever gotten is the Audio drivers which is where it usually stops but sometimes it will stop earlier than that, but Audio is the most problematic because it has never been able to go past that.

    Manish, thanks for your help.
    Tried similar in Windows 7 with no effect. Also tried Adobe Creative Suite cleaner tool via http://www.adobe.com/support/contact/cscleanertool.html It installs ok on my laptop, so doesn't appear to be a location issue, but will not install on my workstation. Manual installation of AAM completes but after typing in user/pass it says 'download error, contact customer service'. Photoshop CS6 beta installed and functioned ok and I had CS4. Tried uninstalling both, same issues. Adobe Lightroom 3.6 is still installed and functions.
    I also tried someone's suggestion of installing the trial of something so it would install the Akamai Netsession download manager. This completes and when I launch the AdobeApplicationManager.exe I can see it spawn Netsession which then hangs and can be killed initially, but zombies for a while ( cannot be killed ). Packet trace ( https://twitter.com/#!/DaSpadeR/status/201295684022960128 ) appears to show initial handshake and then nothing.  -John Spade

  • Error code 31, Drivers will not install correctly

    I am using the following NI PXI cards in a Chroma chassis:
    8360
    5112 or a 5114
    7352 (I think)
    I have a Toshiba laptop, Satellite L305D-S5934 running Vista, on which I am trying to install the driver package.  Everything installs fine, with no errors.  When I plug in the expresscard, turn on the chassis, and then boot the computer, the 8360 installs and is recognized in Device Manager and in MAX.  The other two cards will not install.  I get an error code 31 in device manager on the PCI-PCI/PXI bridge stating that Windows cannot load the driver.
    I have another Toshiba laptop, Satellite L305D-S5895, which specs out about the same, also running Vista, which runs with no problems at all with the same card, cable, and chassis.  Any previous experience with this issue?  Thanks in advance for any timely help you can offer, and I'll gladly supply you folks with as much info as I can.  Attached is a screen shot of the device manager with the flag and the error message.
    -Kyle Jackson
    Attachments:
    DevMgr.jpg ‏141 KB

    Hey Kyle,
    It seems like the ExpressCard isn't working properly, based on what you've told me. You say that the ExpressCard shows up properly in Device Manager after installation, but based on that screenshot it looks like it isn't showing up correctly. Is there an NI-MXI entry in device manager after you install? Take a look at this : Developer Zone : What Laptops Have Been Tested with NI's ExpressCard-MXI for PXI and PXI Express?
    In looking at this article, I don't see either of the two laptops you mentioned as ones we've tested or have had customer's test. That being said, there might be an issue with the S5934 and not with the S5895. I looked into it a bit more, and the two laptops have completely different chipsets, so it's reasonable to say that one laptop might work and one might not. There are a couple things you'll want to do to try and fix this:
    First, make sure you have the most up-to-date BIOS for the S5934. If you still encounter errors, you might want to sign up for the beta program of the NI MXI Express Bios Compatibility Software, which might be able to solve any BIOS incompatibility problems. You can sign up at www.ni.com/beta for that software.
    Justin E
    National Instruments R&D

  • Apple Mobile Device Support Will NOT Install - Win 8 OS

    I uninstalled EVERYTHING Apple...all folders, all apple software. I went through my computer and everything was removed. I did not go through the registry and remove anything so that may be where the problem is.
    I looked in programs and features and there is no "Apple Mobile Device Support" installed.
    It's as if it will not install, no matter what I do.
    I think it may be a registry issue in Win 8 but not sure.
    I have looked all over for a solution but to no avail. I uninstalled everything, reinstalled iTunes, I even tried to installed the .exe specifically for Apple Mobile Device Support and it rolled back, refusing to install it.  I have tried updating drivers. My iPhone does show up in Task manager as well.
    Under device manager, my iPhone
    I follwed this >link< and did exactly what it said to do but still didn't work.
    I have a feeling there is no solution to this one. Any other suggestions?   Is there a way to remove more apple software including in the registry?
    I appreciate any feedback.  If anybody else has had this issue and have a proven method to resolve it, PLEASE share. 
    Thanks again!

    I have the same problem with Win7. Did uninstall so many times now I can do it in my sleep. I did one thing which seemed to work for a while. After I uninstalled itunes 11, I reinstalled the earlier version. That brought back the Apple Mobile Device Support feature. Then I updated itunes to the latest version. Then I get the same message about amds not the latest version and uninstall itunes etc...(evern though when I check amds IS the latest version). It's a merry go round. Can't sync my iphone 4s or iPad 3. I finally got rid of itunes 11.1.1. Guess I just have to sit back and wait for a while until the new version comes out or until someone figures out a solution.

  • Xi-fi fatality pro not installing on Win7

    )Xi-fi fatality pro not installing on Win7 I'm done. 7 hours trying to install a **bleep**ing sound card. Ridiculous. Before any one suggests, I've tried the Pax drivers, the KX drivers, some beta drivers, swapping slots, uninstall, clean drivers, safemode, killing a chicken - Nothing. Creatives crap drivers will not detect their own card, even though Everest has no problem telling me what card I have. HD Audio device is what I get. And even then I have no sound and the orange connecter seems to be a S/PDIF jack.
    Creatives own PID hotfix will not even detect it(how lame is that). No matter what I try, and I've tried everything on these forums (and elsewhere) short of a format and re-install - and I'm not doing that for a ****ed sound card.
    This is not a plea for help. I've availled myself of all the help here and elsewhere (at least the search function works). Thanks to everyone who's helped others and as a result tried to help me as well. But creative's garbage will not work on my system.
    I remember my old Audigy 2 was a pain in the ass, I should have my head examined for even considering Creative again.
    Oh well. I hear ASUS is good. I'm just sorry I wasted my time with this piece of crap.

    -sorry to hear about your problems, I had the same thing happen to me in the past, in my situation the problem was fixed by removing the card from the system and cleaning/polishing the contacts on the bottom of the card with the eraser you find on the back end of a normal pencil...
    best of luck with whatever you choose... creative is F'n many of us using Win7....

  • AIR will NOT install

    XPpro with 2.4ghz cpu, 2 gig ram, 2 much harddrive, single-user desktop, and I am the registered administrator.
    Problem is Adobe AIR will NOT install.
    I downloaded Adobe AIR installer and ran in normal way.
    Adobe AIR attempts to install and then craps out with a message, "Sorry, an error has occured."
    The error reported is error=0.
    There are no logs, because there are no Adobe AIR common files in the Program directory.
    Adobe AIR does NOT appear on the list of installed programs in Control Panel.
    Have searched the registry and removed all references to AIR, and then tried to reinstall, with same result.
    Another time, the error message said I was not the administrator, but control panel says I am, and I am the only user.
    Any HELP solving this critical problem would be keenly appreciated, and thank you.

    Sorry forgot to add system info:
    Win7 Pro (current) Intel Core i7-2600K CPU @ 3.40GHz, 16.0GB RAM, NVIDIA GeForce GTX 570
    Socket LGA1155. Intel P67 Express Chipset
    Thanks

  • Hp officejet pro 8610e driver will not install in windows 8.1

    the Hp drivers will not install from disc or online download.

    Hi @aggie62,
    Welcome to the HP Forums!
    I understand that your HP Officejet pro 8610 driver will not install on Windows 8.1. I am happy to help!
    A few questions for starters:
    What happens when you try to install the driver?
    Do you see any error messages?
    How is your printer connected? Wireless, Ethernet, or USB?
    Are you able to make copies with your printer?
    In the meantime, please try the following:
    Uninstall the software. Uninstalling the Printer Software.
    Clean boot the computer. How to perform a clean boot in Windows.
    Disable any antivirus programs. How to Disable Antivirus in Windows 8?
    Disable any firewall programs. Windows Firewall from start to finish.
    Create a new user account. Managing User Accounts and Logins (Windows 8).
    Re-install using the HP Printer Install Wizard for Windows .
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Maybe you are looking for