EOIO Messages with HOLD status - Solved

Hi,
Found the root cause and un-checked "Maintain order at runtime" in interface determination.
Edited by: RP@261 on Mar 23, 2009 10:48 PM
Edited by: RP@261 on Mar 23, 2009 10:49 PM

Found the root cause and un-checked "Maintain order at runtime" in interface determination.

Similar Messages

Messages in HOLDING status in AE

Hi All,
We have an issue with JDBC receiver EOIO messages, with messages going into HOLD status in AE , its a DEV environment :
1) We have tried checking for failed messages before these messages we donot have any failed messages before these messages just messages in HOLD..
2) we are not able to delete or cancel these messages , we get a message cannot delete the message ,
3) The message is doing a INSERT update to JDBC , JDBC connection is fine.

Hi Kiran,
Please let me know if your problem is fixed.
I'm also facing the same problem in our Testing system where many messages are going to HOLD Status and also there are no messages in the System Error state.
We are trying to resend all the messages in every "Conversation ID". After this some messages gets successful and some will go into Waiting status. We then cancel the messages in waiting status and resend all the messages in HOLD status and the process continues till all the messages in HOLD status in every Coversation ID were cleared.
But this is a very very time consuming process.
So can you please let me know if there is any solution for this prolem.
Thanks,
Pruthvi

Urgent - Messages in "HOLD" status - Alerting

Is there any way that one can get alerted for messages being in HOLD status.
say, for 2 hours.
reg,

Ahmad,
If there is a message in HOLD status due to some reason, I want to get alerted and receive a message in the Alert Inbox.
Please have a look at the note: 813993.
PS: IF a EOIO message fails then the next one will be in HOLD state.

Monitoring EOIO Messages stuck in AE with HOLD status?

Hi Gurus,
Scenario: IDOC -- > XI (Message split) - - > (HTTP/File)
Some times messages to File adapter are stuck in Adapter Engine with status "HOLD". Found the root cause and un-checked "Maintain order at runtime" in interface determination.
How to get alert if the EOIO messages are stuck in AE with status "HOLD"?
Please help.

Hi,
HOLD status
This is an EOIO message whose predecessor was not processed successfully yet. The status is retained until all predecessors are delivered successfully. If a predecessor has the "System error" status and is restarted, all successors are also restarted provided that the delivery of the predecessor is successful.
If a predecessor has the "canceled with errors" status, further processing is not possible in systems before Support Package 11 for the adapter framework and Support Package 10 for the adapter framework core patch 02. In higher version systems, the status of predecessors can only be set to "canceled with errors" in a manual way. Successors that have the "Holding" status can be restarted after you have set the "canceled with errors" status (see related note 811864).
Regards,
Sreenivas

Purging EOIO messages with status "Holding" at the adapter level in XI.

Hi,
I want to purge a set of messages (some 800) with status "Holding" at Adapter level in RunTime Workbench. I have gone through the blog "/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework which explain the way to reprocess the messages which are stuck in EOIO so that the rest in queue are processed but is there a way to purge a large number of messages in a EOIO queue which are holding for long, at the adpater framework level thorugh some option in Runtime workbench or Visual Administrator of J2EE server on which XI is running ?

Hi Gourav,
What do you mean by delete files from folder.
I have this problem and I can't get rid of the messages that are stuck in the adapter engine.
If I need step 3. how is that done?
Thanks.

Messages in "holding "status in Adapter engine

Hi All
We have a problem with the messages being stuck in " Holding " status
We have resent the payloads for these messages,
Although these messages have been manually processed,
1) Messages went into holding status and are still remaining with the same status
2) What we need to do to get rid of message ie. cancel, delete etc.
Please dont send links, A solution will be appreciated
Kindly help

Rajeev
I followed this
/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
and the messages did get cleared
However on the date it got stuck to the Holding state
it is still showing so .
and am unable to get rid of the same status for these messages for that date .. even tried a cache refresh but doesnt help
kindly suggest
/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework

EO Messages with Delivering Status in Adapter Engine

Hi All,
We have a scenario DB-DB Asy with Java Proxies. Proxies are there to accept the messages from Sender DB and insert in target DB. Get the response from target DB and insert back that to Sender DB.
Actually the scenario is Syn, but we made it as Asynchronous by implementing Java Proxies.
Now we are using EO mode in Sender JDBC channel. We have 17 interfaces in the similar pattern. We are using one common XI receiver channel for all these 17 interfaces.
If one message got struck, then rest other Proxies are not getting triggered and not able to resend the message ( ofcourse I know I cannot resend with Delivering Status). But not sure what causes the messages to failed with Delivering Status mode.
Any pointers would be highly appreciated.
Will increase of Parallel Queues really solve my problem? If it fails in Prod, its a big problem for us as we dont want to lose the data. Now everytime we are restarting the Message service server.
Regards,
Srinivas

Normally if there is any problem in target then you will see the adapter engine message as delivering
after the no of retires set then status will go to system error
during this entry check the CC used what is the error causing for that ?
HTH
Rajesh

Messages in HOLDing status

Hi Gurus,
I have a problem with messages in XI. Some of them are in a HOLD status, some work fine. There is no reason why they should be in a HOLD status. I've checked SMQ1, SMQ2 - all clear.
Is there I can do
a, process these messages (they are now in AE waiting to be written in target file)
b, to avoid this HOLD status in future
Thank you,
Olian

Hi,
In RWB -
> Message Monitoring.
Check the interface here and see what is the cause of HOLD.
if you are using FCC in you CC then may be one/more fields having problem due to incorrect data.
Also chekc RWB -
> Component Monitoring (look at receiving CC)
Regards,
Sarvesh

In Message Monitoring Message showing holding status

Hi
Can anyone solve this problem.Its urgent for me.
My scenario is IDoc->XI->FILE
The file i am trying to generate is an xml file which i am dropping in XI application server using File system.
The problem is when i am going to see the message using transaction SXMB_MONI the perticular message interface is showing waiting for acknowladgement status .
But in message monitoring in runtime workbench the it is showing following status:
Adapter Engine
<b>Holding</b>
18.11.2005 05:42:09
CORP_SAP_DR2_030 http://limited.com/usa/sap_appl/retail/VendorsSAPAPOToMANU
MIIA_Create
BS_MANU
I am in SP14.
Also the output xml file is not getting created in the XI application server.
Please let me know the solution.
Thanks
Debraj Roy

Hi Debraj
HOLDING is a status which occurs normally for EOIO (Exactly Once In Order), so your message is set to Holding means some earlier message has not gone through. So until those messages are through this message will be in HOLDING state.
Have a look at this link which explains how to handle such scenarios.
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
cheers
Sameer
Assign points if it helped you

Adapter Engine Holding Status

Hi,
I am working on an automation of XI message monitoring which includes checking the Adapater engine Holding count.
From where can I fetch the number of messages with HOLDING status.
Regards,
Karthik

Hi,
Just go to Run Time workbench (RWB) from your Integration Builder and then click on message monitoring --> then select the Database from dropdwon box ---> then from filter option "Status" select the "Holding" and press the start button and you will get your restult.
Regards,
Sarvesh

Message got struck in hold status in message monitoring.

Hi SDNers,
             I am doing Idoc to File scenario. I triggered an Idoc and it is successfully processed in XI and got struck in message monitoring with hold status.
             After repetetive attempts of restarting the message, still it is in hold status.
             Even if I tried to cancel the message, it is not cancelling as it is in hold status.
            Can anybody please help how to process the message or can anybody explain how to cancel the message from message monitoring, which is in hold status.
Regards,
Jayaram.G

Hi,
If the message that has not yet been delivered is not in error state, the problem cause is probably that the message is blocked in the QRFC queues of the Integration Engine.
Check queue status
Call the Integration Server and call transaction SMQR in the sender and receiver Integration Engine in the corresponding system client.
Check the status of the scheduler and the status of the XBQ* and XBT* queues:
u25CF     Inbound qQueues
XBTI* (ExactlyOnce)
XBQI* (ExactlyOnceInOrder)
u25CF     Outbound queues
XBTO* (ExactlyOnce)
XBQO* (ExactlyOnceInOrder)
u25CF     Acknowledgment queues
XBTB* (ExactlyOnce)
XBQB* (ExactlyOnceInOrder)
u25CF     Large message queue
XBTL* (ExactlyOnce)
If the scheduler has the status Waiting, it is waiting for free work processes. This is why delays occur when XML messages are processed.
If not all necessary queues are registered, you can search for queues with the name prefix above using transaction SMQ2. Use transaction SXMB_ADM to register the queues in this case.

How to STOP messages going into HOLD status very frequently

I'm facing a problem in our Testing Environment where many messages are going to HOLD Status and also there are no messages in the System Error state.
We are trying to resend all the messages in every "Conversation ID". After this some messages gets successful and some will go into Waiting status. We then cancel the messages in waiting status and resend all the messages in HOLD status and the process continues till all the messages in HOLD status in every Coversation ID were cleared.
But this is a very very time consuming process.
So can you please let me know if there is any solution to fix this prolem.
Thanks,
Pruthvi

https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/directToSignIn?loc alang=en_US
Go the the above
Sign in. Go to the left side where it says phone numbers. Delete your number. Then save.
Your iPhone friends will now get the red exclamation point that the message didn't deliver instead of it sending. Then your iPhone friend will force the message to go through as a text by long pressing the message and choosing send as text. Once tthey do that once you're set and all other messages will automatically send as texts for them to you. You just have to hope your iPhone friends realize to force the messages through as texts the first time around but even if they don't at least they know they aren't reaching you and you aren't ignoring them.
Does that help?

JDBC Messages in Holding state

Hi all,
My scenario is jdbc to jdbc - get data from an stored procedure and execute some updates in other database system. What is happening that today all update messages (jdbc receiver) are set as sucessifull processed in sxmb_moni, but no information was updated in target database. I saw that in RWB, those messages are with status "holding"... some of you has any idea how can I deal with this?
thanks!
roberti

Hi,
This might help you
/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
Messages in "holding "status in Adapter engine
Regards
Agasthuri Doss

Adapter message monitoring: message in HOLD

Hi,
since we changed a scenario:
a) old scenario: R/3 --> XI --> BPM --> XI --> FTP
b) new scenario R/3 --> XI --> FTP
the messages stuck in adapter message monitoring.
Message-Interface is the same, CC is the same; just the way through BPM was canceled.
any suggestions?
Thanks
Regards Mario

Hi Mario,
messages are in status HOLD, when they need to be sent in exact order (EOIO), and an error occured in one (or more) queues. When you solve this error, restart the first message from the queue after this error and the items will be processed.
How to do that:
Go to messaging system servlet, find your message (in hold status) and click the Eye icon - Details. Now read the Conversation ID value - which is your queue ID.
Go to RWB, message monitoring, choose adapter engine( from combobox)-> display.Now click additional criteria, put the value of Conversation ID to conversation ID textbox. Start search. You'll see a lot of messages there in hold status I think, But find the one in System Error status. Try to resend this message, if it will not change its status (will still be in in System error), cancel it. Now restart first message from the queue, which was after this wrong one.
This should release the queue and process items.
If any questions, let me know.
Peter

With holding tax amount exceeds the cutomer/vendor line item amount 001

Hi Guru's,
I have an issue, is there any impact to change the withholding tax base amount 20% instead of 10%.When I change the base amount to 20% and post a document system return error message
"With holding tax amount exceeds the cutomer/vendor line item amount 001".Guide me on this issue.
And tell me the impact of previous open item documents.
Regards
Maruthi.

Thanks for all,
MY problem solved.
Regards
Maruthi

EOIO Messages with HOLD status - Solved

Similar Messages

Maybe you are looking for