EOIO Queues - Sysfail..

Hi,
I am getting messages from SRM to Int Server of XI directly using SAP Delivered BADI and in the BADI serialization is set so those Messages goes in to EOIO Queues.
Now all the Messages are stuck in different EOIO queues with Sysfail status of Queues Now so far there is two types of Sysfail errors:
1. XI Error NO_RECEIVER_CASE_ASYNC.RCVR_DETERMINATION
(Only one message in this status though I have tested the configuration In XI IR and works successfully)
2. An exception occurred that was not caught (All toghather 5 messages)
Any suggestion what can be the Case?
Thanks,

Hi,
I have recreated all the config objects again so it solved the first problem but the second problem is still there and the queues are still getting stuck saying
An exception occurred that was not caught.
and when I click the queue it opens the ABAP code for function module SXMS_ASYNC_EXEC
Detailed analysis in SXMB_MONI:
the message processing is stuck at "Message Branch According to Receiver List" step. Also in the trace of the same step I can see following:
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Root-Exception from packaging: An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause</Trace>
<Trace level="1" type="T">Continue single processing</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
Any help resolving this will be appreciated.
Thanks.
-Adrean.
Message was edited by:
Adrean Hart

Similar Messages

File -- MQ scenario; Define EOIO queue.

All,
I have several file2MQ interfaces, all have EOIO (Exactly Once In Order) as "Quality of Service" and therefore must have a "Queue Name". Obviously, EOIO queue should not be shared by more then one communication channel (in order to minimize the risk/penalty in case a message is being stuck in queue). my question:
I have 20 scenarios (20 EOIO senders), should i use queues XBTOM___0001 - XBTOM___0020 (does this queue actualy exists)?
should i refer other technical issues?
Regards
Uri

Hi,
Queue name will be only XBT or other queue, but the sequence like different queue from 001 to 020 will come dynamically(depends on load) and is defined by system.
For more details check this useful blog on queue.
XI Asynchronous Message Processing: Understanding XI Queues -Part I
Thanks!

EOIO queue name change

Hi All,
any possibility EOIO queue name can be changed in Message mapping??
Thank You,
Madhav

Hi Madhav,
Similar to:
public String setVariable(Container container){
String variable = "Test";
java.util.Map map;
// get constant map
map = container.getTransformationParameters();
// get value
//variable = (String) map.get(StreamTransformationConstants.QUEUE_ID);
// set value
map.put( StreamTransformationConstants.QUEUE_ID, variable );
return variable;
See Context Object Names in:
[Technical Context Objects|http://help.sap.com/saphelp_nw04/helpdata/en/6e/ff0bf75772457b863ef5d99bc92404/content.htm]
Regards,
Pedro Baroni

Configuration for Queue Prioritization for EOIO Queues

Hi,
Please can anybody help me in configuring the queue prioritization for EOIO Queues.
Regards
Srinivas

hi,
Check these help..
Eo/EOIO?BE - Queue - ? - /people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
Please go through these links
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
For queues in message mapping
/people/venkat.donela/blog/2005/06/09/introduction-to-queues-in-message-mapping
Here are the Queues for Asynchronous Message Processing
http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/94553b4d53273de10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694
Thanks,
Vijaya.

Different / multiple senders to the same EOIO queue name.

Hello,
I'd like to know if it is possible to send from different senders, different messages to different receivers but using always same EOIO queue?
Scenarios are:
1) SOAP SENDER -> PI -> SOAP RECEIVER A
2) IDOC SENDER -> PI -> SOAP RECEIVER B
3) PROXY ABAP -> SOAP RECEIVER C.
All messages need to be processed by receivers in the same order they were sent from the different senders.
How this scenario should be implemented?
Thanks in advance.

Hi Michal. Thanks for response!
As far as I know,
1- Proxy Sender adds a prefix by defaul. Is it posible to change this behaviour?
2- By Following note 856597, I understand that you can set your own queue name in parameter &QueueId=xxxxxxxxxxxxxxxx. So there should be no problem.
3- In Idoc Adapter, you can set a queue name by using a Function Module, but I dont know whether this adds or not a prefix. Will it add a prefix to the queue name?
So, in case I want to use for all this adapters the same queue, then I need to set in the Soap queueId param, and in the Idoc function module, the same queue name that is generated automatically in Proxy Sender (since this is fixed queue name based on Prefix + custom queue suffix).
4- Is that true? Can I guarantee that from IDOC I can use same queue as used by Proxy and IDOC won't add a prefix?
Thanks again.

Queue SYSFAIL after message split "Whole number overflow on addition"

Hi,
I'm using a message mapping in PI 7.1 to split a message in several messages for each line of an invoice. It's a mapping 1 to 0..n. Everything went well since I had maximum 100 invoice lines to split (then 100 messages at the output of the mapping).
But since I have now messages with 200 invoice lines, everytime the queue is stopped in SYSFAIL status with a message "Whole number overflow on addition". But all messages are processed even if the queue is stopped.
ST22 gives me a COMPUTE_INT_PLUS_OVERFLOW in the method determin_message_size. It seams that PI doen't support a large message at output of a mapping. How can I split the message into multple messages at the outplut of a message mapping ?
Does anyone have a solution ?

Hi,
I guess you can use the Message Packing feature.
See below the links to help you:
http://help.sap.com/saphelp_nwpi711/helpdata/en/46/7ef9124f176be3e10000000a155369/frameset.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/46/7a6e3469454b2be10000000a155369/frameset.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/46/79e8e13872275ae10000000a11466f/frameset.htm
Regards,
Caio Cagnani

Sender SOAP EOIO Queue - Urgent

Hi all,
Could any one help me with this.
We have a scenario, where we send Mat. Master data to R/3. There is a thrid party app from which a SOAP request is sent to R/3 as there is webservice exposed on XI.
When the SOAP sender adapter sends the soap request to XI, I would like to serialize the messages using QOS: EOIO. So that when they reach the target system which is R/3, the data does not get duplicated and is in some desired sequence.
Coming to the actual tricky part,
While defining the sender SOAP adapter, in the QueueID field, I would like to give a dynamic name. As I wanted to have different queue for each Material.
Is it possilbe?
The main reason for this is: Being EOIO if one fails all the subsequent messages will be in HOLD status which would sometimes make J2EE engine scream.
Can any one help me with this.
reg

Hi ,
Help me understand one thing ..since you are trying to keep things in order you are using EOIO ..
So hypothetically even if you have dynamic queue for each message ..then they wont be in order would they ...i.e. qos for each wil EO for each message .
Now In order ...to overcome this ....you can either use the serialisation concept of bpm or ...
better
for SOAP to idoc ..scenario .
Use one of the given idocs ...extend if the need be ..write some kind of validation in the idoc posting function module ..
trigger by background job ...the works you know ..
and you will be good to go ..
besides ..the messages in EOIO ..will fail till such time you take care of the valdation during mapping itself ...
Which means better understanding of the data which is coming in...
which you will get only after posting a few files ...monitoring
and whenever one fails ...apply the necessary ..fix in mapping .
That way your interface will only get better ..
Since you are talking webservice on sender ...most important kind of ...validation
you can have is ...existence check....
Kindly consider
Kindly Consider..

Multiple EOIO queues

hi
I have about 100 file to JDBC interfaces and I need to have EOIO sequencing on the sender file adapter..
because 2nd file should not be processed if the 1st file goes in error.
Will I need 100 seperate Queue names in the 100 sender channels that I have ....is it allowed???
Edited by: hema T on Aug 11, 2011 2:21 PM

HI Hema ,
For 100 different structure you have to create 100 mapping and I hope 100 diff communication channel at file level also if content-conversion is involved .
Secondly you don't have to specify the queue queue name it will be created by the system it self and your message will be sent to them .
EOIO means all file will be processed in same order as it has been picked by the communication channel but if you have diff structure then obviously you will not able to pick all your 100 file through one Comm channel .
Regards,
Saurabh

File to file scenario: EOIO queue name?

hi forum,
i have file to file system, in the sender file communication channel,
i need to use qualit_of_service as "EOIO", but for that i need to use a Queue Name, what should i give as the name of the queue, for test purpose i gave the name of the queue as "xyz", but it works........
but i dont know how it worked

hI SUMIT,
i have a question for long,
i have a typical file BPM file scenario,
when the scenario run....i can see two rows in the MONI, one from sender service to the BPM, and the other from BPM to the Receiver service,
in the moni there is a column called Queue Id,
as i mentioned .... the row in MONI corresponding to Sener service to BPM, the queue ID is always XBQO* ....... as far as i have read, 'Q' in XBQO signifies that it is queue RFC, and it is so even if my file sener sends it using EO(transactional RFC), means no matter how i configure my sender file channel(EO or EOIO), it shows the Queue Id as XBQO*,
i assume that XBQO* means queue-RFC
and XBTO* means Transactional RFC,
pls help

Inbound-Queue SYSFAIL: SQL error in the database when accessing a table

Hi,
we send around 80 IDoc simultaneously, there 15 are stuck.
They all have SYSFAIL in SMQ2 with message: SQL error in the database when accessing a table
I already unlocked the queues and try to resend. Nothing happend!
I ran RSQIWKEX for the single queus but now there are new queues in Status SYSFAIL.
I already checked some entries in forum and blogs, but nothing worked out yet!
Can someone help?! it's urgent!!
br

Hi, well as mentioned i searched and found this already.
But in ST22 i got error concerning
Laufzeitfehler DBIF_RSQL_SQL_ERROR
Ausnahme CX_SY_OPEN_SQL_DB
So i guess it's something more serious.
Any more ideas?!
Can i simply delete the stucked queues and reporcess them?!
br

Deleting error messages from EOIO Queue Automatically at run time

Hi Experts,
I am sending data from proxy to database. In case of error message i want that mesage to be cancelled at the run time and the remaining messages in queue should be processed, whether the error is in Integration engine or adapter engine. Please suggest me how to cancel the error or failed messages automatically (Alert has to be raised for the failed messages) so that my queue is processed successfuly
and failed messages can be sent manually.
Thanks
Ajay Garg

Hi,
for creating and sending Alert check the links.
Alert Configuration
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
Regards,
Phani

XI 2.0 Inbound Queue Sysfail problem

I am having a problem where my xml message is causing the 'xbtoljul' inbound queue to stop. Within the queue I can see a message with the StatusText of "XI message queue stopped due to internal error". Does anyone have a good suggestion for understanding how or why this message is in this state? Looking at the message using 'sxi_monitor' it looks ok, no errors or exceptions.

I'm having the issue. Did you ever get this resolved

Queue name in QOS EOIO -Sender SOAP Adapter

hi,
While configuring sender soap adapter , if we specify EOIO as QOS , then there is a mandatory parameter Queue name to be specified.
What is this Queue name ?
and where is it created
kindly reply
Regards,
loveena

Hi D' souza
Goto tcode -> SXMB_ADM -> register queues
for specifying QOS EOIO you need to assign a queue
from there you can specify the queue for Outbound side EOIO queue
Various queue name and there meaning is as follows
XBT*-Queues for Exactly Once.and time dependent
XBQ*-Queues Exactly Once In Order.
XBTI* are inbound queues for EO with time constarint
XBTO* are outbound queues for EO with time constarint
XBQI* are inbound queues for EOIO
XBQO* are outbound queues for EOIO
for beter understanding of how to configure sender soap channel you may folow this link
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
thanks
sandeep
if helpful reward points
Thanks
sandeep
if helpful rewrad points

Failed Entries not visible in EOIO inbound queue

Hi Experts,
The scenario is HTTP->RFC (aysnchornous) i am specifying the queue name in the HTTP client itself (inbound EOIO queue) and i am posting the message from HTTP client to RFC in R/3 system. So after posting the requests i could not find the messages in the queues ( the messages appears in SXMB_MONI with a queue name say XBOQ0_LINE1), but i could not find the entries in this queue at all... COuld you help me what could be the reasons.. Do we need to set any queue parameters for the MEssages to stay?.
Quick response would be highly helpful.
Thanks and Regards,
Raj

Hi Rajeev thanks for your reply, yes it stays in the queue as you said.. But the requirement of the client is that the RFC will be called in one sequence and it any of the transaction fails then all the others should automatically stops. Thats why we have taken up this method of selecting the inbound queue right from the HTTP service.. Now what we expect is that for example if the first message fails due to an exception in R/3 then all the others should wait in the queue.. But right now what is happening is that they are waiting at the adapter and SXMB_MONI shows that they are in the status scheduled.. (the R/3 system is up in this case.. )..
So you mean to say the message would log in the queue only when R/3 system is donw.. Or even when adapter makes max no of tries to R/3 and finds it as system failure then also would the entry come in the queue ?.
THanks in advance for your answer
Raj

EOIO to EO Queue Problem

Hi Guys,
I'm facing some issues in Queue processing. My scenario is like the JMS to R/3. Sender JMS adapter uses EOIO Queue. The receiver IDOC uses the EO queue , I mean its processing in the trfc mode. The scenario works fine in the Dev system, but the same scenario is throwing errors in the receiver IDOC (Status 75) in QA sys. When we checked the Dev system is using the FM - IDOC_INBOUND_ASYNCHRONOUS , but in case of QA system - its using IDOC_INBOUND_IN_QUEUE. Did anyone faced the same issue, could you guys help me to resolve it.
Best Regards,
Raj.

Hi Raj,
Check out this
http://help.sap.com/saphelp_nw04s/helpdata/en/96/791c42375d5033e10000000a155106/frameset.htm
Queue Processing
If the function module IDOC_INBOUND_IN_QUEUE is to be used, set the relevant indicator. It is used for IDocs that are serialized by queues (quality of service is EOIO). This module is only available in SAP Web AS 6.40 and higher. If it is not available, the function module IDOC_INBOUND_ASYNCHRONOUS is called. The indicator only takes effect in SAP systems Releases 4.0 and higher. Calls for the queue processing function module are placed in the Structure linkqRFC queue.
Regards,
Prateek

EOIO Queues - Sysfail..

Similar Messages

Maybe you are looking for