EOS 6D - Worth the toys or save up for 5d MKIII?

There are lots of things I like about the upcoming EOS 6D, but there are also a few things that I don't like so much.
I like: 
Full frame
Wi-Fi
Wi-Fi smartphone interface
GPS
HDR (maybe?)
I don't like:
Severe lack in AF points
Memory card lacking CF
97% Viewfinder
The price difference is the killer, but maybe it's worth it in the long run. 
Is anyone planning to get the 6D, or specifically NOT going to get it for some reason?
http://www.phoblography.org/

I'd say no, save for the 5D3. The AF in 6D is very limited, it is in the continuity of 5D2 ie 5D1 ie 20D ...
Once you try the advanced AF like 1D or 5D3, you'll have real difficulties to go backward to a limited system.
My advice is to try it in real conditions before you buy, so you can feel the difference.
Alain

Similar Messages

  • When i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

    when i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

    Hi there,
    When I inspect your site in browser tools, I'm getting 404 errors from your page:
    [Error] Failed to load resource: the server responded with a status of 404 (Not Found) (jquery-2.0.3.min.map, line 0)
    [Error] Failed to load resource: the server responded with a status of 404 (Not Found) (edge.4.0.0.min.map, line 0)
    BarnardosIreland wrote:
    I would have thought that publishing should give a complete package that doesn't need any further edits to the code and can just be directly ftp'ed to the web - is this correct?
    In general, you are correct - but also your server does need to be properly configured (and those errors above lead me to think it may not be) to serve the file types that your uploading - but it could be something else entirely. Can you zip up your composition folder, upload it to your Creative Cloud files, set it to share, and then post a link here so I can download it? If you'd rather not share it publicly, can you PM me with a link to your composition files?
    Thanks,
    Joe

  • Downloading a file would bring up an option to open the file or save it - for some reason now it just downloads straight to the download folder. Why? Problem with Firefox or something else?

    Downloading a file would normally bring up an option to open the file with the appropriate program or save it - for some reason now it just downloads straight to the download folder. Why? Problem with Firefox or something else? It's very frustrating - sometimes you want the file opened first so it can be discarded or saved to a different location.

    Hey. that's great! Thanks for posting back with the outcome.

  • Use - SAV file for rpd

    Hi,
    What is the use of SAV file for rpd ?
    Thanks,
    Satheesh

    Hi,
    File gets created when rpd is in online mode.
    When we open rpd in Online mode a dialogue box pops up saying “rpd is available in read-only” mode, Such cases to avoid this error we delete .log and .sav in repository directory and restart services.
    Regards,
    Srikanth

  • I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

    I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

    Hi Carsten...good luck with your project.. I had just about as many Video8 & Hi8 tapes as
    you that I digitized and eventually brought into FCPX..took me many months not weeks
    to do so,BTW, as each tape was 60-90 minutes in lenght...and many hundreds of
    gigab ytes of storage ( uncompressed AVI files)..it's tedious work unless you plan to farm
    it out to a processing house...also regarding eventual storage format...remember
    Hi8 is 400 lines or about 540X480 in todays resoultion metrics..you can't make hi-def out
    of source that starts out as 400 lines...in my case I rewrapped the avi files into .mov
    containers and imported the mov files into FCPX where I got rid of the hundreds of
    minutes of Colorado mountain landscapes to get to that one minute shot of the kids
    on horseback  ( late 80's for most of my archives)..so its a job..scouring thru 30X90 min
    of source to not miss those precious memories takes diligence and hard work but its worth
    it; eventually I encode the uncompressed video I want to save in H.264 format Staandard
    Def not HiDef

  • Is an external battery worth the money?

    I'm looking at about a 20 hour flight to New Zealand. Is an external battery worth the money and does anyone know which one would be the best?

    Honestly, from my understanding most international flights have plug in underneath the seats.  You may consider asking the airline if this is an available amenity on your flight.  It may save you the cost of an additional accessory.

  • Word of the day screen saver not working after upgrade?

    anyone else having the word of the day/dictionary screen saver not pop up anymore after the upgrade?

    Yes, precisely. The crash of "word of the day" cannot be related to the Lion upgrade. Some other issue must be at fault. And to clarify and be specific "Apple" did not say it was not supported but rather one person working in customer support said "word of the day" was not supported - and since some of us Lion users having the screen saver work and only just now failing, that one person at Apple seems to have made an error in guessing what the problem is. Why keep discussing this? Because "word of the day" is a useful screen saver in an educational setting and it is worth the effort to fix it and restore it as a screen saver option. Hoping there is a fix soon.

  • Is sacrificing 8 extra gigs worth the risk?

    I have wanted an iPhone for a long time, but my family doesn't exactly have the money to be paying $200+ for a phone. So when I saw that the 8 gig iPhone 4 is now free with an upgrade, I got really excited. But a lot of people are saying that8 gigs isn't enough. I'm not a big app person - the most I'll want is a couple of games like fruit ninja and stuff; I have an iPod touch, so I won't be keeping all my music on my iPhone; and as far as media goes, I do love my ringtones and photos, but it's my understanding that 8 gigs isn't exactly a meager amount. So, advice from anyone? Is it worth the risk, or should I just try to save up the money for 16 gigs to be safe?

        That's a good question elinder21. There's plenty of customers who get by quite comfortably with the 8 GB iPhone using what you've described. Most iTunes games are around 100 MB, normal length songs (about 4 minutes long) are only about 3 MB each, and most pictures taken on the iPhones are around 2 MB each.  One gigabyte (GB) equals 1,024 megabyte (MB) of data, so 8 GB equals 8,192 MB of data. So the 8 GB iPhone can actually fit quite a bit onto it. Just remember, there is no way to increase the amount of memory available on the iPhones, but you can transfer files to your computer when you find yourself using more than expected. And if you frequently back up your information to your computer instead of leaving hundreds of pictures on your device at all times, there's a good chance the 8GB model will work well.
    Whatever you decide, enjoy your new phone!
    JenniferH_VZW
    Please follow us on Twitter @vzwsupport

  • Is there a way to open Excell file from the server and display in the UI and save it back on to the

    Hello there,
    Is there a way to open Excell file from the server and display in the UI and save it back on to the server? (like showing xell file as a datagrid - add rows, columns etc.)

    Hi Mike,
    Welcome you to the forum.
    You may try:
    SELECT * FROM MyDBNameHere.dbo.OUSR T0
    Thanks,
    Gordon

  • HT201272 Where can I find the app password saver by yonglin wang.  i wanted to restore my iphone and i had purchased this app and it is not anywhere in my purchases to reload.  Why is it not on my list of purchases?

    Where can I find the app "password Saver" by yonglin wang?  while updating my iphone the app was dropped for some reason.  I went to reload from my purchased apps and it is not available.  The history shows my purchase but I can not find the app to reload.  I've lost some critical info and need to retreive if possible.  Any suggestions?

    You tried what ? If the app is no longer available in the store (can you find it in the main part of the store ?) for re-downloading then you would need to have a copy of it somewhere e.g. on your computer's iTunes, on a backup of your downloads.

  • Change not done in the user fields of operation for production order save

    Hi Experts
    I need to change the user fields of the operation like (SLWID and USR00 )for a production order at the time of save.
    So am using the exit PPCO0001 and using the OPERATION_TABLE internal table in the exit to chang the details.
    I have done coding in the exit to change SLWID and USR00 in OPERATION_TABLE internal table, but its not updated in the database and the screen also. I dont understand why.
    Please let me know, why the update are not happening.
    Thanks in advance.
    Regards
    Rajaram

    Why Update is not happening in PPCO0001.
    Please let me know your views.
    Thanks in advance.

  • Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,thanks, Derek

    Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,any ideas? thanks, Derek

    Dave I'm glad to say that it works perfectly but I'm embarrassed to say that my 12 year old nephew hooked it up in about 10 minutes.
    If you have the Kanex Mini DisplayPort cable it will work, what confused me was changing the display settings in System Preferences,
    and dragging the mac screen from the mac onto the tv. Sorry I cant be more helpful but you have the right cable now you need a 12 year old nephew.
    Good luck Derek

  • I am going to buy myself a MacBook Pro in the near future and was wondering if the new Retina Display model would be worth the extra cash. I will mostly be doing photo/video/music editing.

    I am going to buy myself a MacBook Pro in the near future and was wondering if the new Retina Display model would be worth the extra cash. I will mostly be doing photo/video/music editing.

    if you're not in a big rush - why not hold off until Adobe and Microsoft releases an update to support the Retina Screen.
    Don't get me wrong - the Macbook Retina is a good and videos look great - but when it comes to Photoshop, it's a little blurry and the fonts in Excel and Word is pretty blurry too.....I own one....
    In any event, if it's something you can live with - then by all means - go for it.....
    Otherwise - get the non Retina Macbook Pro - it's cheaper, and it's user upgradeable in both RAM and Hard Drive.
    Good luck.

  • I deleted my download folder and now I can't download anything. I can't select the folder to "save file to" and when I select "ask me where to save files" I still can't download. it says your file will start downloading, but then it doesn't. Help!!

    I deleted the folder that saves everything that is downloaded from Firefox. After that I can't download anymore. I've tried clearing my download history, reset the download folder, reset the download action by renaming the mimetype.rdfs file and it's still not working. I've tried to choose a different download folder but it doesn't let me select any folder at all. If I select "ask me where to save files" and then try and download something, the download doesn't start after I select save to. The only time it does actually download is when I select "open with...windows mediaplayer" when downloading then the download will start. Please help. Thank you.

    You broke your phone by getting it wet.  Nothing more to say.  Bring it in to Apple for an out of warranty exchange or buy a new phone.  There's really nothing else we users here can help you with.

  • How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?

    How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?  I would like them to open at the size they were previously resized like they used to in previous operating systems.  They currently open at a very small size and the first colum is only a few letters wide necessitating a resize practically every time one wants to use it.  Any help would be appreciated.

    hi Prasanth,
    select werks matnr from ZVSCHDRUN into table it_plant.
    sort it_plant by matnr werks.
    select
            vbeln
            posnr
            matnr
            werks
            erdat
            kbmeng
            vrkme
            from vbap
            into table it_vbap
            for all entries in it_plant
            where matnr = it_plant-matnr and
                  werks = it_plant-werks.
    and again i have to write one more select query for vbup.
    am i right?

Maybe you are looking for

  • MESSAGE_TYPE_X   - In PR5

    All, I am done some code changes in Program ZEX_SAPLXRSA related to structure ZAMC11VA0ITM ,And field has been added in DS-2LIS_11_VAITM. All chnages transported to Production System,setup tables filling done and pulled data to ODS. In daily loads be

  • My mac is not detecting external microphone from headphone

    my mac is not detecting external microphone from headphone

  • Where to download BR*tools Studio 7.10?

    Hello experts, I am trying to download and install BR*Tool Studio 7.1 for our Oracle databases in our SAP environment but I cannot find the download anywhere. Please someone point me to the download link. Do I need to have license to run this softwar

  • Why is WCDMA shown in logs when I have GSM

    Been trying to troubleshoot issues on my iphone 5 myself since calling apple or seeing a genius didnt help. For two days on oct 1 and oct 2 a lil more than halfway down in my awdd diagnostic logs its shows sys_mode: SYS_MODE_WCDMA. My question is if

  • Openmosix and arch linux

    I am trying to build myself a simple load balancing cluster, and a friend of mine recommended openmosix to me.  Unfortunately, I don't know much about compliling kernels or anything like that, and have always used the arch kernels.  So I had a brains