Eos 760D, aspect ratio do not exist in the menus

The menu with the aspect ratio do not exist.It also seemt to be missing some other tabs in the menu. In my camera there are fewer tabs in the menu than shown in the manual.And I cannot reset to factory settings, tab in menu missing.

Full Auto (The green A+ on the mode dial) puts the camera into a mode where it has the simplicity of a point & shoot camera -- but that means it hides many options to simplify the interface and function.  Many things that the camera is fully capable of changing are locked-out from change when in that mode to prevent a non-advanced user from making a change that might adversely impact their photos ... and a non-advanced user might not know that even made the change. Program mode is similar to full auto mode, EXCEPT that while program automatically determines which settings to use for an automatic shot... you can override the default choices that the camera makes.  You can increase or decrease exposure using exposure compensation.  You can use "Program Shift" to select alternative "equivalent" exposures (for any given amount of light, there are probably at least a half-dozen combinations of shutter speed and aperture opening size that will collect the same amount of light, but trading stops of aperture for stops of shutter speed has a creative impact on the resulting photo.)  This gives you creative control over the photo that you would not have in full A+ mode.   If you don't choose to override anything in Program mode then it's just like shooting in A+ mode.   Since Program mode (as well as Tv, Av and Manual mode) expands your ability to take control of the camera, the menu options with many more configuration choices will show up when the mode dial is in one of those modes.  

Similar Messages

  • How do I change the aspect ratio of source video in the event library?

    I’ve imported video to iMovie 08 from a Canon Mini DV MD235 video camera. The video is recorded in widescreen format and plays back in widescreen when viewed from the iMovie event library (prior to doing any video editing). However, when I delete rejected frames from any particular video clip in the event library the video clip is automatically pillarboxed (i.e. switched from widescreen to 4:3 format). This squashes the video horizontally, stretches it vertically and leaves vertical black bars to the left and right of the video during playback. This automatic change in aspect ratio is occurring to the source video in the event library.
    I’d be grateful for any help / advice on how I can convert the edited clips back to widescreen aspect ratio, so they display in the *event library* as they did when first imported into iMovie.

    I don’t really want to clog up my hard drive with unwanted video and it’s easier to edit it from within iMovie.
    Have you considered manually importing only portions of the clips you actually plan to use? Or, if you must import the entire clip, have you considered trimming externally in an application like MPEG Streamclip which will allow you to set frame level in/out points and then perform a "Save As..." operation that stores the select range of frames to an MOV file container retaining the proper flag?
    Is there anything I can do from within iMovie to activate the 16:9 setting for these as yet unedited clips, so the same pillarboxing doesn’t happen?
    Not sure what you mean by "unedited" here. If the files have been destructively split, the flag is gone and there is nothing you can do about it but re-compress. If you mean they are imported but as of yet whole and still contain their flags, then you have two options. The first is to edit non-destrctively within iMovie '08 and the second would be to do the trimming externally.
    This second option is really fairly simple. Just close iMovie '08. Open MPEG Streamclip and load a clip you want to trim. Set your in and pout points, select the "Save As..." option, and store the files in the original Events folder with a new name. I would also recommend you perform these trims in their original time sequence so the "creation" date time groups (Finder attributes) are in time order also. When done with the loaded clip either delete it from the "Event" folder or move it to an archival location. When done with the last clip, close MPEG Streamclip, delete the Cache and Thumbnail folders from the Event folder, open iMovie '08 again, and go get a cup of coffee or tea while the files are re-thumbnailing. DO NOT DO THIS TO ANY EVENT WHICH CONTAINS FILES ALREADY USED IN ANY PROJECT. (I.e., this must be done before you start the actual project editing process.)
    It seems odd to me that iMovie is doing this.
    I suspect that as the application was originally written as an NLE, non-destructive, "by reference" application, the writers/updaters "overlooked" this facet when adding a "destructive" routine and did not provide for checks of this flag nor provide for copying it re-written segments.

  • The name "Folder" does not exist in the namespace

     I am trying to learn Wpf and doing some of the examples on the Microsoft site. https://msdn.microsoft.com/en-us/library/vstudio/bb546972(v=vs.110).aspx?cs-save-lang=1&cs-lang=vb#code-snippet-1
    I am using Visual studio 2013. As I work through the example I am getting the following error. 
    Error 1
    The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
    c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
    11 17
    FolderExplorer
    Error 2
    The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
    c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
    16 7
    FolderExplorer
    Here is the code:
    <Window x:Class="MainWindow"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
            xmlns:my="clr-namespace:FolderExplorer"
        Title="Folder Explorer" Height="350" Width="525">
        <Window.Resources>
            <ObjectDataProvider x:Key="RootFolderDataProvider" >
                <ObjectDataProvider.ObjectInstance>
                    <my:Folder FullPath="C:\"/>
                </ObjectDataProvider.ObjectInstance>
            </ObjectDataProvider>
            <HierarchicalDataTemplate 
       DataType    = "{x:Type my:Folder}"
                ItemsSource = "{Binding Path=SubFolders}">
                <TextBlock Text="{Binding Path=Name}" />
            </HierarchicalDataTemplate>
        </Window.Resources>
    I have a class file named Folder.vb with this code. 
    Public Class Folder
        Private _folder As DirectoryInfo
        Private _subFolders As ObservableCollection(Of Folder)
        Private _files As ObservableCollection(Of FileInfo)
        Public Sub New()
            Me.FullPath = "c:\"
        End Sub 'New
        Public ReadOnly Property Name() As String
            Get
                Return Me._folder.Name
            End Get
        End Property
        Public Property FullPath() As String
            Get
                Return Me._folder.FullName
            End Get
            Set(value As String)
                If Directory.Exists(value) Then
                    Me._folder = New DirectoryInfo(value)
                Else
                    Throw New ArgumentException("must exist", "fullPath")
                End If
            End Set
        End Property
        ReadOnly Property Files() As ObservableCollection(Of FileInfo)
            Get
                If Me._files Is Nothing Then
                    Me._files = New ObservableCollection(Of FileInfo)
                    Dim fi As FileInfo() = Me._folder.GetFiles()
                    Dim i As Integer
                    For i = 0 To fi.Length - 1
                        Me._files.Add(fi(i))
                    Next i
                End If
                Return Me._files
            End Get
        End Property
        ReadOnly Property SubFolders() As ObservableCollection(Of Folder)
            Get
                If Me._subFolders Is Nothing Then
                    Try
                        Me._subFolders = New ObservableCollection(Of Folder)
                        Dim di As DirectoryInfo() = Me._folder.GetDirectories()
                        Dim i As Integer
                        For i = 0 To di.Length - 1
                            Dim newFolder As New Folder()
                            newFolder.FullPath = di(i).FullName
                            Me._subFolders.Add(newFolder)
                        Next i
                    Catch ex As Exception
                        System.Diagnostics.Trace.WriteLine(ex.Message)
                    End Try
                End If
                Return Me._subFolders
            End Get
        End Property
    End Class
    Can someone explain what is happening. 
    Thanks Hal

    Did you try to build the application (Project->Build in Visual Studio) ? If the error doesn't go away then and you have no other compilation errors (if you do you need to fix these first), you should replace "FolderExplorer" with the namespace
    in which the Folder class resides. If you haven't explicitly declared a namespace, you will find the name of the default namespace under Project->Properties->Root namespace. Copy the value from this text box to your XAML:
    xmlns:my="clr-namespace:FolderExplorer"
    The default namespace is usually the same as the name of the application by default so if your application is called "FolderExplorer" you should be able to build it.
    If you cannot make it work then please upload a reproducable sample of your issue to OneDrive and post the link to it here for further help.
    Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question.

  • The name '' does not exist in the current context

    I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally this
    has also happened during normal debbuging of running code on my machine. 
    I have included 2 screen shots. The first is when it is working. I have a break point set at the declaration of list of types. At this point all my variables are still reporting their values back to the debugger. Once I step over this to the next line (screen
    shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
    This problem is annoying me to no end. If anyone has any insight as to why this might be happening I would be very much appreciative.
    My Settings/Configuration
    Using Visual Studio 2013 Premium (Version 12.0.31101.00 Update 4)
    Projects are all set to Target Framework = .NET 4.5.1
    Resharper 9.1 is installed
    My active configuration is debug mode, Any CPU
    My PC is 64bit and so is the O/S windows 8.1
    All of my projects are also compiled and built in debug mode
    For all my projects configuration debug has the Optimize Code check box unchecked
    I am unit testing code in an outside project referenced by the unit testing project (standard unit test project setup)
    I make use of the latest version of NSubstitute in my tests although I do not think that would have any bearing on this issue
    I omitted the code following the error because it is not relevant. I had cut it out and replaced it with a Task.Delay(4) which resulted in the same issue. 
    What I have tried so far
    I have tried debugging the unit test  from Visual Studio Test Explorer instead of from Resharper with the same result.
    If I remove 2 items at the end of the array it starts to work again (so 6 items initialized instead of 8)
    I clean solution with rebuild has no effect
    Removing properties of the array also seems to work, example remove all initialization of property Value
    Mark as answer or vote as helpful if you find it useful | Igor

    Hi IWolbers,
    >>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
    this has also happened during normal debbuging of running code on my machine.
    So you mean that it worked well before, am I right? 
    If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
    Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
    https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
    Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
    https://msdn.microsoft.com/en-us/library/ms241278.aspx
    To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
    >>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
    How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
    In addition, do you check other debugger window like local or others?
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • JDODataStoreException: The instance null does not exist in the data store

    I'm unable to figure out how this exception occurs.
    I have a class IDCounter which has a number of fields such as
    'm_Name' (String)
    'm_AccountName' (String)
    'm_UserName' (String)
    'm_Description' (String)
    'm_CreationDate' (Date)
    'm_LastModifiedDate' (Date)
    'm_DeletedDate' (Date)
    'm_Count' (long)
    The filter I'm using is "m_AccountName == \"test\" && m_UserName
    ==\"test\" && m_DeletedDate == null"
    The generated SQL statement is "SELECT t0.M_IDX, t0.JDOCLASSX,
    t0.JDOLOCKX, t0.M_ACCOUNTNAMEX, t0.M_CREATIONDATEX, t0.M_DELETEDDATEX,
    t0.M_DESCRIPTIONX, t0.M_LASTMODIFIEDDATEX, t0.M_NAMEX, t0.M_USERNAMEX,
    t0.M_COUNTX FROM ABSTRACTENTITYX t0 WHERE ((t0.M_DELETEDDATEX IS NULL) AND
    t0.JDOCLASSX = 'com.ewarna.pdm.entities.IDCounter')"
    Exception Trace:
    javax.jdo.JDODataStoreException: The instance null does not exist in the
    data store.
         at
    com.solarmetric.kodo.impl.jdbc.runtime.LazyResultList.instantiateRow(LazyResultList.java:165)
         at
    com.solarmetric.kodo.impl.jdbc.runtime.LazyResultList.get(LazyResultList.java:96)
         at java.util.AbstractList$Itr.next(AbstractList.java:416)
         at
    com.solarmetric.kodo.runtime.ResultListIterator.next(ResultListIterator.java:49)
         at
    com.solarmetric.kodo.impl.jdbc.runtime.ResultListFactory.createResultList(ResultListFactory.java:85)
         at
    com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.executeQuery(JDBCStoreManager.java:646)
         at
    com.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.executeQuery(JDBCQuery.java:150)
         at com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:580)
         at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:428)
         at
    com.solarmetric.kodo.query.QueryImpl$SynchronizedQuery.execute(QueryImpl.java:1331)
         at
    com.ewarna.pdm.sessions.persistence.BasicQuery.getByAdvancedFormula(BasicQuery.java:78)
         at
    com.ewarna.pdm.sessions.persistence.BasicQuery.getByFormula(BasicQuery.java:119)
         at
    com.ewarna.pdm.sessions.persistence.BasicQuery.getByFormula(BasicQuery.java:95)
         at
    com.ewarna.pdm.sessions.persistence.BasicQuery.getAll(BasicQuery.java:131)
         at
    com.ewarna.pdm.sessions.persistence.GenericEntityManager$7.execute(GenericEntityManager.java:305)
         at
    com.ewarna.pdm.sessions.persistence.GenericEntityManager.execute(GenericEntityManager.java:251)
         ... 18 more

    Youcan no longer display a workbook. You receive an error message when opening: <Internal error>: 1201 document storage
    Cause and prerequisites
    In very rare cases, when you store a workbook, you might not be able to open it again.
    Solution
    Function module BDS_PHIOS_GET_RIGHT has to be changed so that the last available version of the Workbooks can be displayed.

  • Field VIQMSM-MATXT(14) does not exist in the screen SAPLIQS0 7204

    Hi experts,
    I have a BDC calls QM02 Tcode in a custom report as follow:
      PERFORM bdc_dynpro      USING 'SAPLIQS0' '7204'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=REAK'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'VIQMEL-QMNUM'.
      CLEAR txline.
      CONCATENATE 'VIQMSM-MATXT(' lnindex ')' INTO txline.
      " txline = VIQMSM-MATXT(0014)
      CONCATENATE 'PO #: ' alv_qmel-ponum INTO matxt SEPARATED BY space.
      PERFORM bdc_field       USING txline
                                      matxt.
      PERFORM bdc_transaction USING 'QM02'.
    When debugging I found that the input bdcdata table contains a field VIQMSM-MATXT(14) in screen SAPLIQS0 7204.
    Number 14 is the number of task of the notification which was not marked as deleted.
    This field caused the error: Field VIQMSM-MATXT(14) does not exist in the screen SAPLIQS0 7204 after that.
    I would like to know what does VIQMSM-MATXT(14) mean? How BDC can transfer VIQMSM-MATXT(14) to QM02? And How does it work?
    Thanks,
    Khanh

    Hi Kostek,
    I did not have the solution for this exact problem because our FA canceled this bug.
    Check your test case carefully whether the screen of the TCode called by BDC has that field OR NOT. If that screen does not have that field in your special case, just ignore it.
    Regards,
    Khanh

  • The Table.Column does not exist on the rowset

    Hi I have the following issue:
    I keep getting a message in Power BI Designer Preview that states:
    The 'collections.Name' column does not exist in the rowset.
    I have a MySQL DB connected to an Access DB and then I've created and saved a query within Access.
    Then I'm bringig in this query into Power BI Designer. To note, I can see my 1 row of data in the Query view of Power BI Designer but my error appears when I goto report after it tries to load the data into the model
    the MySQL Statement looks like this:
    SELECT orders.TRUNKSHOWID,
           orders.ID,
           orders.DATEENTERED,
           orders_products.NUMBER,
           orders_products.SIZE,
           orders_products.DESCRIPTION,
           products_categories.NAME AS Cat1,
           products_categories_1.NAME AS Cat2,
           collections.NAME,
           Releases.Name,
           orders_products.PRICE,
           orders_products.DISCOUNT,
           orders_products.TYPE,
           products.WHOLESALECOST,
           orders.FIRSTNAME,
           orders.LASTNAME,
           orders.ADDRESS,
           orders.ADDRESS2,
           orders.CITY,
           orders.STATE,
           orders.ZIP,
           orders.COUNTY,
           orders.COUNTRY,
           orders.PHONE,
           orders.EMAIL,
           orders.BILL_FIRSTNAME,
           orders.BILL_LASTNAME,
           orders.BILL_ADDRESS,
           orders.BILL_ADDRESS2,
           orders.BILL_CITY,
           orders.BILL_STATE,
           orders.BILL_ZIP,
           orders.BILL_COUNTRY,
           trunkshows.TRUNKKEEPERID
    FROM trunkshows
    INNER JOIN (Releases
                INNER JOIN ((((products
                               INNER JOIN (orders_products
                                           INNER JOIN orders ON orders_products.ORDERID = orders.ID) ON products.ID = orders_products.PRODUCTID)
                              INNER JOIN products_categories ON products.CATEGORYID = products_categories.ID)
                             INNER JOIN products_categories AS products_categories_1 ON products.CATEGORYID2 = products_categories_1.ID)
                            INNER JOIN collections ON products.COLLECTIONSID = collections.ID) ON Releases.ID = products.ReleasesID) ON trunkshows.ID = orders.TRUNKSHOWID

    Hi
    When you create a workbook in DEV, you will be assigning a query for that workbook
    When you transport workbook from DEV to QA,the assigned workbook comes along with it
    When you transport only query from DEV to QA, there are certain technical elements called query elements which may not have transported properly
    To avoid this inconsistency between DEV and QA,it is advisable you transport the workbook again....Create new workbook in DEV, assign a query, transport the workbook to QA
    Regards
    N Ganesh

  • Content file download failed. Reason: HTTP status 404: The requested URL does not exist on the server.

    Hi,
    I am getting this error in most of our WSUS servers.
    Content file download failed.
    Reason: HTTP status 404: The requested URL does not exist on the server.
    Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe 
    Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
     After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
    Log Name:      Application
    Source:        Windows Server Update Services
    Date:          12/19/2014 4:45:55 PM
    Event ID:      10032
    Task Category: 7
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      ******
    Description:
    The server is failing to download some updates.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Windows Server Update Services" />
        <EventID Qualifiers="0">10032</EventID>
        <Level>2</Level>
        <Task>7</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
        <EventRecordID>496887</EventRecordID>
        <Channel>Application</Channel>
        <Computer>*****</Computer>
         <Data>The server is failing to download some updates.</Data>
    This error is happening everyday. Please advise for a fix.

    Reason: HTTP status 404: The requested URL does not exist on the server.
    Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe 
    Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
    Source:        Windows Server Update Services
    Description:
    The server is failing to download some updates.
    This error is happening everyday. Please advise for a fix.
    If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
    If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
    For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
    For a downstream server, figure out what the affected updates are and fix the upstream server.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)

    we are using VS 2013. i have created new build definition and run that created build its getting failed and showing error message as "The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly
    reference?)" and "The type or namespace name 'WinComboBox, UITestControl, WinTitleBar.....etc' could not be found (are you missing a using directive or an assembly reference?)". in the error log is showing the error number are "error CS0234
    & error CS0246". 
    Actually i have created build for automation execution from MTM lab environment. i have to assign the build to the test plan. once the build is passed , i will assign to the test plan and run with automation options. 
    if i build the solution its getting successfully build. but when i run the created build definition it show the error message's.  
    Could you guide me how to resolve the above error's ? 
    Thanks in Advance...

    Hello Divakar Ponnada,
    I have checked the error CS0234 from here:
    http://msdn.microsoft.com/en-us/library/0e92xd7b.aspx
    It means your project cannot find the proper reference to your type "Visual Studio" from the namespace Microsoft.
    May I ask this question, does your build definition means something like the following blog described?
    http://www.asp.net/web-forms/overview/deployment/configuring-team-foundation-server-for-web-deployment/creating-a-build-definition-that-supports-deployment
    "A build definition is the mechanism that controls how and when builds occur for team projects in TFS. "
    If that is the problem, may I ask whether your build agent is in the same machine where you build your application?
    The build agent will first search for the reference from its local GAC and if it cannot find it, the error like you said will reports. Please manually build your project from your build agent machine to see the result, or install Visual Studio to your build
    agent machine. In that way I think your problem may fixed.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • The type or namespace name 'Optimization' does not exist in the namespace 'System.Web'

    App_Start\BundleConfig.cs (1): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     Global.asax.cs (4): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     App_Start\BundleConfig.cs (8): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
    I'm getting the above errors when attempting to create a remote build.
    I've tried the solution found here (http://blog.davidebbo.com/2014/01/the-right-way-to-restore-nuget-packages.html) but no luck.

    Hi,
    I have an asp.net mvc project in Visual Studio 2013. I'm hosting it on Visual Studio Online. 
    The project builds fine on my local machine/Visual Studio 2013. When i try to do a build on Visual Studio Online (i created a build definition there), i get similar errors. 
     App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     App_Start\FilterConfig.cs (2): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     Controllers\HomeController.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     Controllers\HomeController.cs (9): The type or namespace name 'Controller' could not be found (are you missing a using directive or an assembly reference?)
     Global.asax.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     Global.asax.cs (6): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     App_Start\BundleConfig.cs (9): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
     App_Start\FilterConfig.cs (8): The type or namespace name 'GlobalFilterCollection' could not be found (are you missing a using directive or an assembly reference?)
     Controllers\HomeController.cs (11): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
     Controllers\HomeController.cs (16): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
     Controllers\HomeController.cs (23): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Helpers, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
    processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Optimization". Check to make sure the assembly exists on disk. If this
    reference is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL".
    Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
    processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Deployment, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
    processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
    processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "WebGrease". Check to make sure the assembly exists on disk. If this reference is required
    by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Antlr3.Runtime". Check to make sure the assembly exists on disk. If this reference
    is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Newtonsoft.Json". Check to make sure the assembly exists on disk. If this reference
    is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Assembly strong name "System.Web.Mvc, Version=__MvcPagesVersion__, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" is
    either a path which could not be found or it is a full assembly name which is badly formed. If it is a full assembly name it may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('),
    Backslash(\).

  • SSDT - Using a SharePoint list data feed as source - "column does not exist in the rowset" error

    Hey guys!
    So, I want to use a SharePoint list data to create a cube/tabular model, in order to make a complex analysis in PPS using MDX.
    To create the tabular model, I'm using the SS Data Tools, and importing a feed from the respective SharePoint list (using the _vti_bin/listdata.svcextension and then selecting the list(s) I wanna to import).
    Everything looks fine and smooth, I can select and preview the data in the table import wizard, but in the end, when importing, I always get this error IF the table has one or more row of data (if the table is empty, it's ok...) - the <...>
    column doesn't exist in the rowset.
    (Curiously, when I have the same procedure in PowerPivot for Excel, I have no problems, everything works fine. The problem is that then I get again errors if I try to create a tabular model on SSDT importing a PowerPivot file).
    Here's the error:
    Had you already tried this in SSDT? Are you experiencing the same trouble?
    Best regards, and thanks in advance!
    Jorge Mateus
    Jorge Mateus

    I noticed something else too.
    I can't process Tabular Models on both SSDT and SSMS (2012), but I can process Tabular Models created on PowerPivot.
    I tried to create a Data Feed connection on PowerPivot, and it was successfully created. However, if restoring the PowerPivot Tabular DB on my SSAS Tabular instance and processing (full) the model through SSMS, it won't work.
    Is there anything different on PowerPivot and SSDT related with Partitioning or connections to the data sources?
    Regards,
    Jorge
    Jorge Mateus
    Update:
    When trying to Restore a PowerPivot file on my SSAS Tabular Server and full process the model:
    The operation failed because the source does not contain the requested column. You can fix this problem by updating the column mappings.
    More Details:
    The 'X' column does not exist in the rowset.
    An error occurred while processing the partition 'X_81dabac5-c250-4a8c-8832-ad7fcedd35cb' in table 'X_81dabac5-c250-4a8c-8832-ad7fcedd35cb'.
    The current operation was cancelled because another operation in the transaction failed.
    X is the first column of the source table, no matter if I chose others on the PowerPivot table.
    When trying to import data from a data feed using SSDT:
    The 'X' column does not exist in the rowset.
    An error occurred while processing the partition 'X_ee6be81f-2235-4113-b404-cfcb20647a38' in table 'X_ee6be81f-2235-4113-b404-cfcb20647a38'.
    The current operation was cancelled because another operation in the transaction failed.
    X is the first chosen column to import.

  • Tutorial - Create a blog reader Store app (C++) - Error:The name does not exist in the namespace!

    I'm trying to create my first store app based on msdn's sample.
    Link to the sample:
    https://msdn.microsoft.com/pl-PL/library/windows/apps/hh465045.aspx
    I have problem doing last step (number 3) of part 3.
    In code below in file App.xaml the compiler get the error "The name 'FeedDataSource' does not exist in the namespace 'using:SimpleBlogReader'"
    <Application
    x:Class="SimpleBlogReader.App"
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
    xmlns:local="using:SimpleBlogReader">
    <Application.Resources>
    <local:FeedDataSource x:Key="feedDataSource"/>
    </Application.Resources>
    </Application>
    In the file App.xaml.h I added line #include "FeedData.h", and FeedData.h  looks like:
    //feeddata.h
    #pragma once
    #include "pch.h"
    namespace SimpleBlogReader
    namespace WFC = Windows::Foundation::Collections;
    namespace WF = Windows::Foundation;
    namespace WUIXD = Windows::UI::Xaml::Documents;
    namespace WWS = Windows::Web::Syndication;
    /// <summary>
    /// A FeedDataSource represents a collection of FeedData objects
    /// and provides the methods to retrieve the stores URLs and download
    /// the source data from which FeedData and FeedItem objects are constructed.
    /// This class is instantiated at startup by this declaration in the
    /// ResourceDictionary in app.xaml: <local:FeedDataSource x:Key="feedDataSource" />
    /// </summary>
    [Windows::UI::Xaml::Data::Bindable]
    public ref class FeedDataSource sealed
    private:
    Platform::Collections::Vector<FeedData^>^ m_feeds;
    FeedData^ GetFeedData(Platform::String^ feedUri, WWS::SyndicationFeed^ feed);
    void DeleteBadFeedHandler(Windows::UI::Popups::UICommand^ command);
    public:
    FeedDataSource();
    property Windows::Foundation::Collections::IObservableVector<FeedData^>^ Feeds
    Windows::Foundation::Collections::IObservableVector<FeedData^>^ get()
    return this->m_feeds;
    property Platform::String^ CurrentFeedUri;
    void InitDataSource();
    void RetrieveFeedAndInitData(Platform::String^ url, WWS::SyndicationClient^ client);
    How to solve this problem?

    You're testing this too early. You haven't yet finished writing code that your current code depends on. Feeddata.cpp won't build, so you can't use the data object that hasn't yet been created.
    In particular, feeddata.cpp doesn't build since it has many references to items which get added in later steps.
    For example, TextHelper is added in part 5 and App::RemoveFeed is added in part 10.
    You'll need to either wait until you've implemented those before you test or comment out the calls to the unimplemented features until they're done. TextHelper looks like it adds quite a bit and you're almost there, but you can probably get away with commenting
    out the calls to RemoveFeed and GetTitlesFromUri for now.

  • XAML DataContext: name does not exist in the namespace

    I have created a new C# WPF Application project in VS 2013, named dataconfigtest.  The namespace is dataconfigtest.
    I add a new, public class named "TestDataClass".  It is also in the dataconfigtest namespace.
    I add the following code to the XAML file (MainWindow.xaml) in the <Window> section:
    xmlns:local="clr-namespace:dataconfigtest"
    I then define the datacontext as follows:
    <Window.DataContext>
    <local:TestDataClass />
    </Window.DataContext>
    When I build the project, I receive the following error:
    The name "TestDataClass" does not exist in the namespace "clr-namespace:dataconfigtest"
    I have tried:
    closing/opening VS
    removing/adding the project
    creating a fresh project
    cleaning and rebuilding
    including the assembly information in the XAML "local" namespace definition
    Note that I can set the datacontext in the C# code-behind.  It's only in the XAML that I have problems.
    Thank you for any help!
    EDIT: I opened the same VS project file on a different computer and it worked.  I will try repairing my installation of VS.
    EDIT2: I have repaired the installation and rebooted.  Same issue.  I will try re-installing VS.

    Hi Qubert,
    >>The name "TestDataClass" does not exist in the namespace "clr-namespace:dataconfigtest"
    From this error message,i think that your namespace could be incorrect or you need to rebuild the project.
    This is my code snippets:
    <Window x:Class="dataconfigtest.MainWindow"
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
    xmlns:local="clr-namespace:dataconfigtest"
    Title="MainWindow" Height="350" Width="525">
    <Window.DataContext>
    <local:TestDataClass></local:TestDataClass>
    </Window.DataContext>
    <Grid>
    </Grid>
    </Window>
    public class TestDataClass
    public string data { get; set; }
    >>EDIT: I opened the same VS project file on a different computer and it worked.  I will try repairing my installation of VS.
    In my experience,your environment might be some problems, So please feel free to tell me the result of  repairing your VS.

  • The kind infoobject does not exist in the CMS

    hi, all of a sudden, when i import a new biar file to the server, i got the below error message:
    the kind infoobject does not exist in the CMS
    the server worked fine before. and then i imported the biar to another server, it works fine, and seems not the biar problem.
    then i found some error explanation
    Cause
    The InfoObject type does not exist in the CMS
    Action
    Ensure that the InfoObject type is propertly installed.
    and
    Cause
    An InfoObject type is missing.
    Action
    Ensure that the XSD for this type of InfoObject is installed.
    I want to know how to reinstall the infoObject type.
    or any other idear on this.
    thanks all.
    Ada

    WHat's the exact version of the source and the target BO system?
    Regards,
    Sratos

  • DBIF_RSQL_TABLE_UNKNOWN Table AUSPN_V1 does not exist in the database with ID R/3

    Hi All,
    We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
    Can anyone advise how to solve the issue? Please find below portion of the short dumps.
    Category               ABAP Programming Error
    Runtime Errors         DBIF_RSQL_TABLE_UNKNOWN
    ABAP Program           SAPLCLVF
    Application Component  CA-CL-CL
    Date and Time          11.06.2014 12:08:28
    Short text
         A table is unknown or does not exist.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLCLVF" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         A table is referred to in an SAP Open SQL statement that either does not
          exist or is unknown to the ABAP Data Dictionary.
         The table involved is "AUSPN_V1" or another table accessed in the statement.
    Source Code Extract
    Line  SourceCde
      104     if dupl = kreuz.
      105       insert auspc_v2 client specified from table auspcv2
      106                              accepting duplicate keys.
      107     else.
      108       insert auspc_v2 client specified from table auspcv2.
      109       if syst-subrc ne 0.
      110         message a585 with tabausp.
      111       endif.
      112     endif.
      113     refresh auspcv2.
      114   endif.
      115   read table auspcv3 index 1.
      116   if syst-subrc = 0.
      117     if dupl = kreuz.
      118       insert auspc_v3 client specified from table auspcv3
      119                              accepting duplicate keys.
      120     else.
      121       insert auspc_v3 client specified from table auspcv3.
      122       if syst-subrc ne 0.
      123         message a585 with tabausp.
      124       endif.
      125     endif.
      126     refresh auspcv3.
      127   endif.
      128   read table auspnv1 index 1.
      129   if syst-subrc = 0.
      130     if dupl = kreuz.
      131       insert auspn_v1 client specified from table auspnv1
      132                              accepting duplicate keys.
      133     else.
    >>>>>       insert auspn_v1 client specified from table auspnv1.
      135       if syst-subrc ne 0.
      136         message a585 with tabausp.
      137       endif.
      138     endif.
      139     refresh auspnv1.
      140   endif.
      141   read table auspnv2 index 1.
      142   if syst-subrc = 0.
      143     if dupl = kreuz.
      144       insert auspn_v2 client specified from table auspnv2
      145                              accepting duplicate keys.
      146     else.
      147       insert auspn_v2 client specified from table auspnv2.
      148       if syst-subrc ne 0.
      149         message a585 with tabausp.
      150       endif.
      151     endif.
      152     refresh auspnv2.
      153   endif.

    Hello
    Please check on transaction SE11 if this table exists and if it is active.
    Also, it may be a database issue. What is your database?
    BR
    Caetano

Maybe you are looking for