EOS C100 and 5D Mark III - How to use together, match settings, etc.

I shoot with both of these cameras and wondering if anyone has a reference for matching the picture settings. For example, on the C100, there is a custom preset setting 'EOS Standard' that I assume corresponds to the 'Standard' picture style on the 5D Mk III. But, what if I want to shoot cinema locked, HDR or some other way?

percoplus wrote:
As a matter of fact, I had the 5D Mark II bundle at first, and Then I installed the new Mark III bundle with version 3 of the EOS utility. None of it is working - in terms of creating a new preset.
It seems wrong that the window that opens with 'Register User Defined Style' has a drop down with all of the default presets already in the camera. That drop down should not be there, should it? There should only be the choice to import a new preset or maybe edit an existing preset. If you wanted one of the defaults, you would select it from the previous menu window.
For your purposes, I think I'd drop back to version 2 of the EOS Utility. Version 3 is very new and is aimed at compatibility with the rather idiosyncratic version 4 of DPP. EOS 3 has worked well for me so far, but if I were having trouble with it, I'd revert.
Bob
Boston, Massachusetts USA

Similar Messages

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

I updated my ipad 3 to iOS 6. now my appstore shows chinese apps and prices in rmb. how can i change the settings?

I updated my ipad 3 to iOS 6. now my appstore shows chinese apps and prices in rmb. how can i change the settings?

Change home country
1. App Store>Featured>Apple ID (at bottom of page)
2. Tap on Apple ID>View Apple ID
4. Enter your password
5. Country/Region>Change Country or Region

[svn:osmf:] 13113: Changing to not use an embedded font by default, and adding instructions on how to use the free 'type writer' bitmap font.

Revision: 13113
Revision: 13113
Author:   [email protected]
Date:     2009-12-21 01:08:10 -0800 (Mon, 21 Dec 2009)
Log Message:
Changing to not use an embedded font by default, and adding instructions on how to use the free 'type writer' bitmap font.
Modified Paths:
    osmf/trunk/libs/ChromeLibrary/.flexLibProperties
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/ScrubBar.as
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/URLInput.as
Added Paths:
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/Fonts.as
Removed Paths:
    osmf/trunk/libs/ChromeLibrary/assets/images/stop_up.png_1

Your site was built using tables, whose sizes are defined in your site.
If we look at your first table definition, we can see:
<table width="861" height="1449" border="3" cellpadding="0" cellspacing="0" bordercolor="#868787">
Your table has a width of 861 pixels and an overall height of 1449 pixels. Anything you put into that overall box must fit those dimensions, else
it won't be visible. Anything you add above it will push everything down. You can redefine your sizing to let you edit more inside of the table elements.
This is why, when you type in more text, things act weird. If you are in Dreamweaver, you must find the right cell to put your text into and then enter
text there. Unfortunately, this is going to push things around, which were all lined up using tables. And this gets everything offset with respect to
everything else in your website.
And that is why everyone is saying, "Start Over!"
I just inherited a website that has been put together using tables. I'm going to have to expend considerable effort in rewriting the entire design of the
website because of that. because everything I intend to add to the pages on the site is going to need to be deconstructed in order to get it to work
properly if I'm adding text and pictures that need to line up with each other.
You need something done quick and dirty and the only way I can recommend you do that is to use Dreamweaver to show you the tables you have
and put what you need in a new table that is defined above or below the tables you all ready have defined. Do that and then get back to someone here
who knows how to make a website correctly to clean up your entire website and make it editable -- which will cost you some money, but it will be
money well-spent.
I like to quote this maxim: Good, Fast, Cheap. Pick any two. This works for website design. You can get it fast and cheap, but it won't be good. I
think you may have chosen that route.

HT4061 Just purchasedan ipad 16GB and don,t know how to use it. Need a turorial

Just purchased an ipad16GB and don't knoe how to use it.

Read the user manual. You can find it on line or there should be a link in safari for it too, I believe.
See this link from the Apple web site: http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

I have just bought a car with bluetooth and want to know how to use my iphone with it

I bought a car with bluetooth facility and want to know how to use use iphone with it

First, you will need to navigate to the bluetooth interface in your car. Generally, this is something built into the navigation system/entertainment system. Look for an item that says either settings or communication, or bluetooth. If you are having trouble, refer to your car's manual. Next, go to settings, general, bluetooth and change the switch to on. Follow the onscreen instructions in your car until you see something like waiting for device or this is now discoverable or something like that. Your car or some sort of weird name should now appear under the devices list in the bluetooth settings. Now, the car should give you a passcode to type into the phone (it may or may not do this). Type this in and/or follow the rest of the onscreen instructions.

I downloaded form filler for firefox but can't find it and don't know how to use it?

I downloaded form filler for firefox but can't find it and don't know how to use it?

This doesn't sound like a Firefox problem. You should try to consider, methodically, what you did before the problem occurred so that you can describe to someone exactly what occurred, and in what order.

How to use iTunes Match?

How to use iTunes Match?

CMARINEAU wrote:
Question: is there supposed to be a iCloud symbol next to every song that matches in iTunes? I only have "unavailable to match" clouds.
No. Tracks will only have a cloud in the "iCloud Download" column if they are unprocessed by iTM. If a track is deleted from the iTunes library and is available for download there will be a slightly different cloud icon in that column with an arrow pointing down to incidate it is available to download.
Tracks that have been processed or are resident in the iTunes library will have nothing in the "iCloud Download" column.

Which full frame body? EOS 6D or 5D Mark III

Hi
I am graduating as a cinematographer soon and considering a new camera kit. Since I am also a hard core still photography lover, I have thought of investing a full frame sensor body.
I will be using my new camera equally for both still and motion picture photography.
I would like to know the reviews on the Canon EOS 6D and how it compares to the EOS 5D MARK III.
I was thinking I should go for the cheaper full frame body ( EOS 6D) and invest on the lens range - where I'm thinking of investing in the L series IS USM category lenses.
I would like to know from users their honest opinion from experience.

"Since I am also a hard core still photography lover ..."
To me this says it all. There is no choice except to get the 5D Mk III. The 5D is simply head and shoulders above the 6D, hence the lower model number. Don't kid yourself with the 6D is just as good. It is not.
That is, of course, if the budget allows. You must consider the whole!
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

Lightroom 4 and 5D Mark III

Does anyone know if Lightroom already support the Canon eos 5D Mark III?
I want to buy LR4, but is there isn't still support, I will wait.
Greetings,
Ashvin Ghisyawan
www.totaalfotografie.nl

Cornelia-l,
Thank you for your response to this thread that has gotten more than a little out of hand.
I am normally a reader and not a poster on the forum. I responded as the OP in my mind
was obviously new, and likely not a native English speaker. English is my native tongue
and I assure all of you, that unlike a google search, unless you use just the right set of words
in the right order and stand on your left foot and touch you nose, you will not likely find what
you are looking for on many interest specific forums. Some work better than others, obviously,
but I can also understand how this can be quite daunting for a non-native English speaker.
I have done all I can to try to diffuse this in a nice way, and I guess it's just time to say thanks,
Cornelia-l, for all your insiteful posts and I am outta here.
Kind regards to all.
asu_chic

Camera Raw Camera Calibration Tab and 5D Mark III

I don't think that many people do this in camera raw, but it was kind of an important step in my workflow with the Canon 7D before and is just not working the same way with the 5D Mark III now.
In the Camera Calibration Tab (Third from the right side) I always changed Camera Profile from Adobe Standard to Camera Standard or Camera Portrait. This step made the image automatically look better, contrast was better and the highlights look a lot better that way. Of course the "Camera Portrait" option makes the image a lil bit red, like the Picture Style in the camera does. But it was an easy adjustment with the Hue Slider of the Red Channel. Like I already said - really great improvement of the image on the 7D raw files, beautiful highlights, shiny, contrasty and so on... Same stuff worked with 5D Mark II perfectly, too.
Now with the 5D Mark III the "Camera Portrait" option, my favourite one, gets me pretty bad results. The Image is too strong oversaturated, too much red in the skintones and in the shadows, too! Shadow contrast gets worse and I can't control this settings the way I did before with the hue/saturation sliders of the channels. It's too extreme red or it's too yellow, but not something right between this extremes. And the highlights get some green tint, so it's no real optimization of the image overall quality at all, like with the other cameras. I don't know if the support of the 5DMIII is still not up to date... It is not only my camera, I also have asked other photographers with a 5D Mark III and they have the same issues changing the camera profile. Lightroom has exactly the same effect... It would be great, if an Adobe Employee can forward this issues, so that it gets tweaked with the further updates and 5dm3 will work the same way in camera raw like mark 2 or 7D.
Sorry for my bad english

Yes, white balance is another possible reason for mismatch
These rules apply:
- if you use white balance "as shot", then white balance in ACR will be the same as from camera or DPP (in a sense - what is white color in ACR will be white in DPP also). However, color temperature/tint shown in ACR will be probably slightly different than value recorded in exif of jpeg or raw file. It's because in that case, whitebalancing is performed using some metadata in raw file by both ACR or DPP, while temperature displayed in ACR is calculated from that metadat using color matrices in selected profile, according to a formula from one book (as documented in dng sdk), while DPP is probably using some other formula or slightly different color matrices
- the same will happen if you use WB dropper on exactly the same position in the photo by both ACR and DPP
- but, if you use the same temperature preset in ACR and DPP (for instance 5200 K), then white in ACR and DPP will probably be a bit different, because whitebalancing is performed in oposite direction now (ACR calculates RGB multipliers from that temperature and using color matrices in the profile)
I hope this was understandable, although it's a bit complicated

Aperture and Canon Mark III 1DS

What gives???...Unsupported image format* message for top of line Canon Mark III 1DS. and Nikon D3. Are you serious??? 3 months is time enough!!!
Thanks, Norm

I believe that RAW support for the Canon Mark III AND the Nikon D3 was just added in OS 10.5.2 release
http://docs.info.apple.com/article.html?artnum=306835
Have you completed the lated update? Apple has support but you MUST do your part too and install it
LN

Trouble with Adobe dng converter and 5d mark iii

I have recently downloaded the dng converter 6.7 to convert my cr2 files from my 5d mark iii, however it keeps on telling me i have no files to convert, is there anything i can do about this? i am using elements 10

Test with the new 7.1 DNG converter:
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5389
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5388
See if that changes anything. If not, we'll want to take a look at one of your files to test.

I just got a new ipod and i dont know how to use it. it keeps asking me for wifi connection or to log on to itunes. i logged on to itunes but its still not working please help

please help me use my ipod touch. i just got it and im a little confused on how to use it. it keeps asking for a wifi connection even while im logged in on itunes

iPod touch User Guide (For iOS 5.1 Software)
Are you connected to wi-fi?
If not, then connect.

I have an A2300 camera and don't know how to use it. How do you set the time/date.

I am a novice at this. I can take pictures, buy can't find them. Does the cd that came with the camera show how to
operate the camera. What is the function key for and how do you use it.
Any help would be appreciated.
Thanks,
Tross.

Hello Tross!
When you take images, provided that you have a memory card inserted, they are saved direct to the card. They can be accessed in camera by going into the Playback menu. There is a CD that has an instruction manual on it that does show you how to use the camera. If you do not have this, you can download the manual here.
The Function/ Set button serves two main functions. One, it displays a small menu where you set the shooting mode and image quality options. Second, all setting that need to be confirmed are done with the Function/ Set button.
Changing the date and time settings
1. Press the Menu button.
3. The Tools Menu appears. Go to Date and Time.
4. Next, operate the date and time screen:
Set the year, month, date, and time.
Change the year, month, and date.
- Set the daylight saving time (one hour is added to the current time).
5. After the settings are completed, press the ) button.
We hope this helps answer your questions and that you enjoy the camera. If you need to contact us immediately, please feel free to contact us through the web site.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

EOS C100 and 5D Mark III - How to use together, match settings, etc.

Similar Messages

Maybe you are looking for