Eos remote app for iOS

The idea was great, however the development seems to be stopped on this.
It hasn't been updated since Dec of last year.
Will there be a new version of EOS Remote app for iOS?
Features I'd like to see from the upgrade (if there's any)
1) Full size image transfer
2) Video file transfer
3) Indicate if a file is already downloaded to the phone or not.
Thanks,

Hi rmpark!
Thanks for posting.
The EOS Remote App currently works with up to iOS version 7. I am not sure if or when the next version of the app will be released, or what features will be added to it, but I have forwarded your suggestions along. This feedback is very important to Canon. Please continue to check in the app store from time to time for any updated versions that may be released.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Keyboard issue using Danish keyboard on Remote app for iOS.

Hi there.
I have noticed a quite annoying issue with the Remote Desktop for iOS when using foreign keyboards along with the Remote Desktop app.
The PC I'm remoting to from my iPad Air is a Windows 7 machine with an English Windows.
I have a danish keyboard layout installed, and have removed the English keyboard.
But.. Here comes the strange issue.
If I connect via Remote Desktop before I log into my PC (from my PC), the special characters like :;/*^%}{ ect. works just fine on my iPad.
If I then log on to my PC from the PC, the keyboard on the PC has been changed to english, even though there's no english keybord layout installed on my PC.
The special characters like the danish æøå has been changed out with ; and other wrong characters.
I then have to press CTRL+SHIFT on my PC to change it back to the danish layout.
But... If I do so on my PC and afterwards connect via the Remote Desktop app on my iPad Air, the keyboard is messed up on my iPad.
All the special characters like /:;)(^#%{ is placed wrong and give me a wrong character.
And that happens even if I change the keyboard on my iPad to English.
I really hope you will be able to fix this in a future update enabling full support for foreign keyboards between iOS7 and Windows 7.
Thanks in advance.
- Bjørn, Denmark

Hi,
Why are the characters mixed up in the session?
This issue can occur if the keyboard language has been switched on the remote PC while running a remote desktop session. In the case you would like to switch to a different keyboard language
follow these instructions.
Note: The remote PC selects the system language of the device running the remote desktop client and not the keyboard language. When switching the keyboard language on your device, you need
to manually switch the keyboard language on the remote PC.
1. Open settings on your device.
2. Tap General and then tap International.
3. Tap Language and select the language running on the remote PC.
4. Open the RD Client and connect to the remote PC and check if the Windows keyboard language matches the language that you selected.
http://technet.microsoft.com/library/dn473015
Hope this helps.
Jeremy Wu
TechNet Community Support

AIO REMOTE app on IOS

I use the AiO Remote app on IOS to scan legal size documents. I think my problem is with the latest update of this app as I never had this issue in the past. I scan the multi-page LEGAL size doc with no issues. I see the doc pages in legal size format in the app. Once I click on SAVE, all of a sudden the app shrinks the legal size to fit letter size. I can't find how to disable this. Thanks in advance for any help.

Hey @iDADx7,
Welcome to the HP Support Forum.
I understand you're encountering a document formatting issue when using the HP All-in-One Printer Remote app with your HP Officejet 6600 e-All-in-One Printer. I would like to help.
What version of iOS are you working with? Try uninstalling the app and then clicking here to reinstall. Does the issue persist?
Please let me know the result of your troubleshooting by responding to this post. Thank you for posting in the HP Support Forum and have a great day!
Regards,
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Phottix Ares won't trigger my off camera 430 ex II when using iPhone EOS remote app!

I have a Canon 6D, a canon 430ex II and a set of Phottix Ares transmitter and receiver. I have set up my flash off camera and was planning to use the camera’s wifi capability to take a self portrait with my iPhone EOS remote app, but the flash wouldn't fire at all. When I turned off the app and phisically pressed the shutter it worked but never through the app. Then I thought of mounting the 430 directly onto the camera, used the remote app to shoot wirelessly and I was surprised that it worked!!! I coudn't find the logic behind this and I tried to find an answer everywhere with no hope!
Has anyone gone through tha same experience or have any explanation or solution to this problem? or any alternative solution to get the flash to trigger while shooting wirelessly? thanks.
[Mod note: Moved to "EOS" because issue seems to be with the EOS App. You'll get more exposure here!]
Solved!
Go to Solution.

If you are shooting using Live View (through the app) it won't fire the flashes like that. But if you just use the app to release the shutter and review the pics it will. It's been awhile since I've used the app, but there's a button or something to go between live view and standard shooting.
That said, I've read that some cameras can work around this by going into the menu and disabling silent shooting, and then Live View will work with simple triggers. I've never done it as I don't shoot in live view, but I've seen this discussed a lot. Not sure if the same can be said for the app, but it's worth a shot (no pun intended).
http://www.p4pictures.com/2011/02/live-view-mode-and-flash-on-your-eos-dslr/

Remote app for iPad Wont show songs but iPhone Will

Hi All
I have a Strange problem with airport Express and airtunes
From my iPad 4.2.1 running Remote app for iPad if i search for an artist, like Gary Moore, it shows the artist name, but when i Press the name it doesnt display the songs with this artist, it says no songs found.
But if i use the same app on both my iPhone 4 and my iPod touch, and do the same search and Press the artist name, it shows All the songs that i have with this artist
Both the iPad and the iPhone connects to the same airtunes library, on the same machine with iTunes 10.1?
Does anybody have any ideas of what is wrong
I have tried to reinstall the app on the iPad, but that diednt work, i have tried to delete the library on the iPad with no luck
Aby help would be apreciated
Sincerely
Carsten Larsen
mac mini Mac OS X (10.6.3)

I know this is an old question, but I had the same problem and found the solution somewhere else and thought I'd post it here as this thread comes up when googling for the answer.
It appears as though any songs without an "Album" don't appear. In iTunes select all songs without an album, right click and select "Get Info" and give them an Album name (e.g. "Unknown" or "Singles"). This might also apply to songs without other tags.

Flash CS5.5 or CS6 creating an interactive ebook /app for IOS

I'm in middle ground here as I'm able to create a simple app for IOS using CS5.5 and was wondering if I'm able to create an interactive IBook ( which is actually an app ) to know what I mean if you go to the Apple Book Store and download the free "Beatles" Yellow Submarine you will see the interactivity.
When I write middle ground I mean I just finished downloading CS6 and looking at some tutes so if this is possible, which I know I can get the interactivity but its just putting it in book form that I was curious about.
thx
RD

I misunderstood you, because I'm not english speaker. But I will try to answer..
You develop 1 app. This app will include all that you wants. Page - it's just object. Each object can contain another objects. Like a tree and leafs. So you simply make 1 page with any animations. Page 2 with any animations and etc and combine this to one APP.
Here is the link, you can get free 8 pages. Will be good if you can spent $1.99 =)))
http://tinyurl.com/7plewc7
If you don't have iPad - here is a Russian video review http://www.youtube.com/watch?feature=player_embedded&v=rXb2jswoz0Y
This all done using Adobe Flash CS5.5 and Exported to Adobe Air, than published to AppStore.
If you want to offer me some job in this area - just write me PM

TS1741 I cannot get the remote app for Apple tv work on either my iPad or iPhone. Home sharing is "on". Any ideas?

Why won' remote app for Apple tv work on my iPad or iPhone? Home sharing is turned on.

A frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is the service being blocked on the network. Make sure your network isn't hidden, has a unique name, that MAC address authentication is disabled, security is set to use WPA 2 Personal and that there is only one router/device acting as a DHCP server and providing NAT services.
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
80
TCP
HTTP
AirPlay
443
TCP
HTTPS
AirPlay
554
TCP/UDP
RTSP
AirPlay
3689
TCP
DAAP
iTunes/AirPlay
5297
TCP
Bonjour
5289
TCP/UDP
Bonjour
5353
TCP/UDP
MDNS
Bonjour/AirPlay
49159
UDP
MDNS (Win)
Bonjour/AirPlay
49163
UDP
MDNS (Win)
Bonjour/AirPlay
Refer to your router manual/manufacturer for any settings that are specific to that model.
Another frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is security software, in many cases configuring it correctly, disabling it or even uninstalling it can help, but in some cases the security software can cause problems that simply reconfiguring, disabling or uninstalling cannot reverse.
If you are consistently unable to activate AirPlay, have tried all the steps in this article and have security software installed on your system, you might benefit from contacting its provider or participating in any online forums they run to discuss the matter with them

IPrint app for iOS fails to print photos in colour

We are running the latest build of the iPrint Appliance (Version: 1.0.1.69 Patch 1) and cannot get the iPrint app for iOS to print photos in colour. I suspect that this is a problem with the internal renderer and JPG files. Printing a PDF, DOC or DOCX file which uses the External windows renderer prints in colour without any issues. Anyone know whether this is a known bug or how I can enable colour printing for a JPG file?
Thanks
Chris

ckaropoulos,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Although I have been using Google Maps App in India for a while now (without any issues) but I still want to know if there are any plans for launching Turn by Turn Navigation under the OOTB Map App for iOS?

Although I have been using Google Maps App in India for a while now (without any issues) but I still want to know if there are any plans for launching Turn by Turn Navigation under the OOTB Map App for iOS?
It has been quite a while since Apple came up with Map App of their own and should be releasing improved maps with more capabilities in India.
Cheers!
Abhishek

No one here can answer your question, as there is no one from Apple here, & no one here represents Apple or speaks for Apple.

Hello , how r u, can i ask 1 question about xcode, i have mac os x 10.7.5 , n xcode version 4.6.3 i want build apps for ios 7.1 n mac os 1.9 ,, , but my macbook is old late 2008 macbook 4,1, so can i develop apps for ios7 n 1.9 using xcode 4.6.3, bcz my

hello , how r u,
can i ask 1 question about xcode, i have mac os x 10.7.5 , n xcode version 4.6.3 i want build apps for ios 7.1 n mac os 1.9 ,, , but my macbook is old late 2008 macbook 4,1, so can i develop apps for ios7 n 1.9 using xcode 4.6.3, bcz my machine cant upadte on 1.8 n 10.9,, ihave 2gb ram . core 2 duo pr, plz rely asap,
thnxs

Please type complete sentences and words. This isn't an instant message program.
https://developer.apple.com/support/ios/ios-dev-center.html

Embedding swf files in AIR app for ios

Hi,
After going through a lot of articles already available, I found answers with varying views on the following questions:-
1) Can we embed swf files using the embed tag in air app for ios, with symbols exported ?
Something like [Embed(source="someSWF",symbol="exportedSymbol")]
and also something like [Embed(source="someSWF")].
From what I understand, one can't embed swf's with actionscript byte code in them. So exporting symbols actually creates class linkages which leads to creation of abc. But I'm unsure on this because some sources say otherwise.
2) Can we embed swf files using embed tag in air app for ios, without symbols exported ?
Something like [Embed(source="someSWF")]
and also something like [Embed(source="someSWF" mimeType = "application/octet-stream")]
I read somewhere else, that you can actually embed symbols separately by providing symbol tag in embed tag but not entire swf (which leads to uncompiled actionscript error) but not sure about this as this is contradictory to finding #1.
3) If #2 is possible, then do embedding two different swfs with same symbol names would cause a conflict and result in #3747 error ?
Please note I am not asking about the Loader class here but using the Embed keyword for embedding swfs.
Also do the results differ with AIRSDK 3.8 and 3.9 and using different swf-version in compiler flags ?
In our application we started getting error #3747 in class creation of one of the embedded swfs (like new EmbeddedClass()) when we changed from swf-version 17 to 21 using AIRSDK 3.8. So was this error not there earlier or it was there but swf-version was suppressing it ?
Any help is much appreciated.
Thanks!

I am fairly sure that the answer to your questions is: “no”.
For embed to work the AIR app would have to be working in interpreter mode, and that can work for local testing, but can’t work for submitting apps. An easy change for you to do would be to use SWCs instead of Embed. Other than that you’re looking at Loader, but also a tricky command line build of the app.

Sharing a ZIP file is not available with the Creative Cloud App for iOS

I can't share a ZIP file via Creative Cloud App for iOS. Why?

Thank you! You solved the problem!! /Lars
3 jan 2014 kl. 22:34 skrev AMreso <[email protected]>:
Re: The Creative Cloud App for desktop can't be installed on my Macbook pro
created by AMreso in Creative Cloud Download & Install - View the full discussion
Rename OOBE folder with OOBEOLD ( Mac HD/Library/Application Support/Adobe/OOBE folder )
Run the Adobe cleaner ( http://helpx.adobe.com/content/dam/help/en/support/AdobeCreativeCloudC leanerTool.dmg )
Remove Adobe application Manager/Adobe creative cloud .
Restart the computer and redownload Adobe Creative cloud and install it.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5978280#5978280
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5978280#5978280
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5978280#5978280. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Creative Cloud Download & Install at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

HT1947 I can't pair my remote app for my iTunes music There is nothing to pair in THE device list

Can't pair remote app on library
Home sharing works
But I only need remote app for remote library functionality

yes it is conected to the same wifi network ..i can download my library from icloud from that wifi on my iphone
i did and add the firewall isseu
so itunes is added on windows firewall
my device list shows sync iphone, transfer purchases,back up , and restore from back up
i can't add the numbers from remote app
even remote home sharing doesn't seems to connect neither

How can i delete apps for IOS 7.0.6 when i press the home key the "X" key doesnt appear

how can i delete apps for IOS 7.0.6 when i press the home key the "X" key doesnt appear?

Hi-
This worked!. After updating to 7.0.6 a few days ago I was unable to delete apps. Called Apple support for help without success. I have NEVER entered a passcode to get in to restrictions so I know I didn't make this change (so I'm assuming that 7.0.6 did it for me). Apple wanted me to restore my iphone but thought I'd do more research first. Your advice solved the problem. THANKS!

Apps for iOS 3

Hi all
can some one please let me know whether the apps for iOS 3 are still available with iTunes? is so can some one give me a link??
Thanks in advance

They are only available to download off iTunes on your computer I've read

Eos remote app for iOS

Similar Messages

Maybe you are looking for