EoX-Offline-Files -- Download (need for Version-Number or Timestamp)

Hi all,
with downloading the offline EoX-Files from CCO
[ Link: http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=4.1.1&mdfid=282635175&sftType=CiscoWorks+Resource+Manager+Essentials+Patches&optPlat=Solaris&nodecount=2&edesignator=null&modelName=CiscoWorks+Resource+Manager+Essentials+4.3&treeMdfId=268439477&treeName=Network+Management&modifmdfid=&imname=&hybrid=Y&imst=N&lr=Y]
it is not possible to determine the timestamp of zip-file creation (actual release date is 02/MAR/2010, pretty old for creating actual
EoX-Reports).
Are the any plans to implement versioning/indexing to better see creation date?
Thanks for any feedback
Lothar

Hi Joe,
thanks for the update.
Would it be possible for you (or the responsible web-admin), with less efford, to provide the zip-file creation date
on the download site.
Just to quick see if there are now ones are available.
Thanks in advance
Lothar

Similar Messages

SNMP MIB file download needed for Laserjet 5550 and 1505n. Paper out, Paper jam etc.

Please assist me. I need MIB files for SNMP messages like paper out, paper jam, etc. The printers are LaserJet 5550 and 1505n. HP rules.
This question was solved.
View Solution.

Thank you for the help. I found out in a different manner but here it is:
On the rightmost side you can see the adress and in the middle the data type and name. They are all at position 0.
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperJam,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.9
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperOut,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.8
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PeripheralError,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.6
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_ConnectionTerminationAck,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.5
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_NewMode,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.4
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_InterventionState,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.3
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_AtBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.24
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_TcpBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.23
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_LlcBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.22
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_NovBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.21
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Reserved,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.20
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperState,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.2
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperOutput,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.19
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Printing,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.18
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_DoorOpen,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.17
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Initialize,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.16
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Wait,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.15
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Busy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.14
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_IoActive,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.13
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_MemoryOut,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.12
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PagePunt,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.11
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_TonerLow,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.10
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_LineState,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.1
I hope it's useful for someone also.
Best regards to all forum users!
Cristian

Those that have successfully downloaded mac lion please write the md5, sha1, exact file size and the version number, please.

those that have successfully downloaded mac lion please write the md5, sha1, exact file size and the version number, please.

This is how, for instance, on a flsh drive:
http://lifehacker.com/5823096/how-to-burn-your-own-lion-install-dvd-or-flash-dri ve

File Content Conversion for Unequal Number of Columns

Hi,
Iam following this thread FCC for Unequal Number of Columns.
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
when iam doing ,iam getting an error
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'TOTALSET.fieldFixedLengths' or 'TOTALSET.fieldSeparator' is missing Consistency check: no. of arguments in 'TOTALSET.fieldFixedLength' does not match 'TOTALSET.fieldNames' (0 <> 1)
My conversion parameters are
Recordset Structure                      : TOTALSET,*
TOTALSET.fieldNames                 : ITEMSET
ignoreRecordsetName                   : true
TOTALSET.fieldSeparator              : 'nl'
My file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
Please help in resoving the error.
Thanks in Advance
Srinivas

Hi Srivinas,
your file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
So it's easy, you have to use KEYFIELD option, coz you have something like that :
Line 1 : keyfield = 01 following by a limited number of columns (e.g 30 fields for Structure1)
Line 2 : keyfield = 02 following by a limited number of columns (e.g 14 fields for Structure2)
Line 3 : keyfield = 03 following by a limited number of columns (e.g 23 fields for Structure3)
Thanks to the Keyfield, you define a field which is present in each line that you can used to distinguished the different structures of lines. In your case, it seems that the keyfield is the first column (01, 02, 03).
Try to use that:
Recorset = TOTALSET         (and don't use option "ignoreRecordsetName : true")
Recordset structure =Structure1,1,Structure2,(star),Structure3,(start)       (the difficulty will be to find the good use of "*" and "1", but after some tests you will find the good one).
Note: replace (start) by the character " * "
Key field value = keyfield
Key field type = String (case sensitive)
Structure1.fieldNames = keyfield,field2, field3 etc.. of Structure1
Structure2.fieldNames = keyfield,field2, field3 etc.. of Structure2
Structure3.fieldNames = keyfield,field2, field3 etc.. of Structure3
and then you will have a XML like that:
TOTALSET
Structure1 and all its fieldN
Structure2 and all its fieldN
Structure2 and all its fieldN
Structure3 and all its fieldN
Structure3 and all its fieldN
TOTALSET
Structure1 and all its fieldN    because I used Structure1,1
Structure3 and all its fieldN
Regards.
Mickael
Edited by: Mickael Huchet on Apr 20, 2009 5:18 PM
Edited by: Mickael Huchet on Apr 20, 2009 5:19 PM

There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page

There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page.

Thank you for the update Dlawrenceusa. I would recommend reviewing the installation logs for the updates that are failing to apply to determine the exact cause of the failure. You can find details on how to locate and interpret the installation log files at Creative Cloud Help / Troubleshoot install issues with log files | CC. You are welcome to post any specific error messages you discover to this discussion.

Which files are needed for connection to database in 11gR2?

I'm confused about the following files:
sqlnet.ora
tnsnames.ora
listener.ora
host file
If I understand correctly, sqlnet.ora and tnsnames.ora can exist in both client and Oracle database server and listener.ora should only exist in Oracle database server. I guess host file can exist in both client and Oracle database server.
I'm trying to understand which of the files are needed to access Oracle 11gR2 database using different tools such as
sqlplus, SQL Developer, and Database Control on Oracle database server or from a client machine.
If I'm on an Oracle database server, which of the files are needed for accessing 11gR2 database on that server for the different tools?
If I'm on a client machine, which of the files are needed for accessing 11gR2 database on an Oracle database server for the different tools?

881656 wrote:
I'm confused about the following files:
sqlnet.ora
tnsnames.ora
listener.ora
host file
If I understand correctly, sqlnet.ora and tnsnames.ora can exist in both client and Oracle database server and listener.ora should only exist in Oracle database server. I guess host file can exist in both client and Oracle database server.
I'm trying to understand which of the files are needed to access Oracle 11gR2 database using different tools such as
sqlplus, SQL Developer, and Database Control on Oracle database server or from a client machine.
If I'm on an Oracle database server, which of the files are needed for accessing 11gR2 database on that server for the different tools?
If I'm on a client machine, which of the files are needed for accessing 11gR2 database on an Oracle database server for the different tools?sqlnet.ora is used to configure the actions of sqlnet on whatever machine. Some of the config parms available to it apply only to the server side, some apply only to the client side, some apply to both.
tnsnames.ora is used by client processes to resolve a connect alias to a specicific host, port, and service. It is used ONLY by the client side of tns. You see it on host machines because those machines can also run client processes.
host file. Oracle doesn't know what this file is. Oracle doesn't give a flying fig about this file. It is used by the standard network software in the OS to resolve a name to an IP address. The only reason you even see it discussed in the Oracle world is because Oracle TNS sits on top of the standard OSI network stack, and uses it. Thus, if your tnsnames file has an entry like:
houston =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = vmlnx01)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = houston)
#==========tns will never know or care where vmlnx01 is. The request will be packaged and sent to the standard network stack with a request to "route this package to vmlnx01, wherever that is.". The OS network stack will then resolve 'vmlnx01' to an ip address, by one of several possible methods. ONE of those methods is to look it up in the local hosts file.

Suddenly can't open files says need newer version

I was using muse fine this morning.. then just about 30 minutes later went to open same file and get message saying needs newer version and please update to newest version. I have the latest and even uninstalled/reinstalled and let update to below
v3.2 Build 2 Cl 772925
and still get same message. Again, I was just working on the exact same file this am. Weird thing is I can create a new site, just won't let me work on the exact same file I was working on earlier today.
Ideas?

Hello,
Could you please provide us your .muse file so that we can have try to open it at our end and check for the issues?
Please email it to [email protected] If your file is greater than 20mb you can use something like Adobe SendNow or SendThisFile.
Please do not forget to mention link to this forum in your e-mail so that we can identify the file.
Regards,
Sachin

Which file will identify Leopard version number?

Is there a file in the System folder which gives away the system version number?
I need to find out which version of Leopard (10.5.1 or 10.5.2) is installed on a mounted (but not booted) volume so can't just go to About This Mac. I can access all the System files but I can't find one which gives a definitive clue - unless perhaps it's the Finder (which has the futuristic version number of 10.5.3). TIA.
Simon

pr100 wrote:
Is there a file in the System folder which gives away the system version number?
I need to find out which version of Leopard (10.5.1 or 10.5.2) is installed on a mounted (but not booted) volume so can't just go to About This Mac. I can access all the System files but I can't find one which gives a definitive clue - unless perhaps it's the Finder (which has the futuristic version number of 10.5.3). TIA.
Simon
If you open a Terminal and look in the root directory you will see a file, "mach_kernel" which I believe represents the OS version by date
If you cd to the root directory and enter the Terminal command:
ls -lT mach_kernel
(that's the letter l)
You should get the date of the kernel, which, on my 10.5.2 machine is dated Feb 5 2008
10.5.2 was released on Feb 11, so the final date may well be Feb 5.

How can I get to the files I need for school and jobs? It only allows me to go to my photos.

I Am having problems getting to my files so I can submit papers for school and to send in resumes. It will only let me go to my pictures it will not let me go to my files I need.

What are you talking about? What will only let you go to your pictures? Where are the files stored? What app are you attempting to access them with? And what does this have to do with AppleWorks, which has been discontinued for years?

What files are needed for backup

Hello all,
Our database stopped working because of a mistake and we've lost lots of our control files and configuration files.
On the other hand there are 5 oracle_homes in our system! So we decided to uninstall Oracle and install a clean version and restore our data, tables, triggers, functions and ... to it.
We have many rman level 0 and 1 backups since 2 months ago and the size of each level 0 backup is around 1.8 GB.
But I am new to Oracle, so please let me know which files I need to keep from our current Oracle before uninstalling it and how I can restore backups to the new oracle (probably I will install it in a new drive not in D:/ again and with a new SID maybe). Also please let me know which version I should install? (Desktop Class or Server Class) We have some applications on our own laptops which connect to server and retrieve/insert data from/into oracle database on the server.
Our current database does not mount and open because of the problems I mentioned above.
Our server is: Windows Server 2008
Oracle Version: 11g
The scrips the we used to create rman backups are:
echo database backup, level 1
echo %DATE%
echo %TIME%
set datetimef=%date:~-4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %datetimef%
rman target / @F:\backup1.txt LOG F:\database-backup\rman-logs\%datetimef%.txt
copy F:\database-backup\rman-logs\%datetimef%.txt F:\database-backup\rman-logs\current-log.txt
and
echo database backup, level 0
echo %DATE%
echo %TIME%
set datetimef=%date:~-4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %datetimef%
rman target / @F:\backup0.txt LOG F:\database-backup\rman-logs\%datetimef%.txt
copy F:\database-backup\rman-logs\%datetimef%.txt F:\database-backup\rman-logs\current-log.txt
Thanks

RMAN's BACKUP command supports backing up the following types of files:
Database files, including datafiles, control files, and the server parameter file (SPFILE)
Archived redo logs
Other backups created by RMAN, including such as datafile and control file image copies, and backup sets containing SPFILEs, control files, datafiles and archived logs
Check
http://web.njit.edu/info/limpid/DOC/backup.102/b14192/bkup001.htm

Sample values needed for Customer Number And Sales Organisation in BAPI

Hi Experts,
    I want to execute the Bapi BAPI_SALESORDER_GETLIST with mandatory parameters such as Customer Number & Sales Organisation .
    How would I come to know what values to enter for Customer Number & Sales Organisation inorder to get some Output in the form of table SALES_ORDER.
    Can you ll help me with some sample values which I can enter to get some useful output.
    And what is the logical way to go inorder to test such BAPIs in future.
Thanks in Advance,
Pavanmeet Singh

Hi,
CALL FUNCTION 'BAPI_SALESORDER_GETLIST'
EXPORTING
customer_number = cust
sales_organization = sorg
MATERIAL =
DOCUMENT_DATE =
DOCUMENT_DATE_TO =
PURCHASE_ORDER =
TRANSACTION_GROUP = 0
PURCHASE_ORDER_NUMBER =
IMPORTING
return = it_return
TABLES
sales_orders = salesorder_itab.
Regards
Sudheer

What project files are needed for development?

Hello,
I have a new WebHelp project that is nearing completion. Our
Web developers are anxious to build the help into their
application, but I'm not sure what files they need or do not need?
Do I just turn over all files to them, or some subset?
Thanks!
Charlie

Hi Charlie
Assuming you are using RoboHelp HTML properly with all files
located on your C drive, you should notice that inside your project
folder are some sub folders. One should be named
!SSL!. Inside THAT folder should be a folder named
WebHelp. You need to supply *ALL* the files (and folders)
that you find inside this folder.
Hopefully this helps... Rick

Hi, can someone tell me what exactly is QuickTimeMPEG2.dmg? its an installer file i need for downloading the QuickTime Mpeg-2 Playback Component. Where exactly can I find this as well?

hi, can someone tell me what exactly is QuickTimeMpeg2.dmg? Its some kind of installer file for downloading QuickTime Mpeg-2 Playbaack Component but I don't know where exactly to find it or how to get it on my mac?

Hello,
http://forums.macrumors.com/showthread.php?t=1332324
If you want it on your Mac, not sure it works or not in your OS version.
Then double click on the DMG, that'll mount the disk image, in that you'l likely see an installer .pkg to double click on to install.

@JEXPORT download needed for essbase 9.2.1

Good evening,
I need to export a subset of data from an essbase database ; I'm using essbase 9.2.1 .
I'm reading that the @JEXPORT function, or @JExtendedExportTo function will work for this need.
Does anyone know where this can be downloaded? I'm having trouble finding it on the Oracle/Hyperion dev sites.
Thanks, Jon Dyer

Hi,
Give http://www.sendspace.com/file/e6yszv a try
Cheers
John
http://john-goodwin.blogspot.com/

When extract omni.ja file using winrar program give me that file is corrupted for version 17.0.2 windows and language is EN-US ?

i need to update and set default bookmarks show always when install firefox
when update omni.ja file i do this steps :
Steps to change “Bookmarks.html” file in “omni.ja”:
- Copy “omni.ja” file and change the prefix of the file to “zip” so that you can extract it using WinRAR program, then extract the file.
- Make the changes you want to the extracted files.
- Open the original “omni.ja” file using WinRAR program.
- Using “Add” button to replace the modified files.
the first step when extart the file it's give me that file is corrupted only for this version (firefox 17.0.2 windows EN-US)

There is no need to edit files in the omni.ja! archives to achieve this.
*http://mike.kaply.com/2013/05/06/dont-unpack-and-repack-omni-jar/
*http://mike.kaply.com/2012/03/26/customizing-firefox-distribution-ini/
If you need to initialize specific files in a new profile then create a template folder in the Firefox program folder (C:\Program Files\Mozilla Firefox\browser\defaults\profile\) and place the files in that folder.
*http://mike.kaply.com/2013/04/24/major-changes-coming-in-firefox-21/
*http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/

EoX-Offline-Files -- Download (need for Version-Number or Timestamp)

Similar Messages

Maybe you are looking for