EP 6.0 Monitoring by Solman 7.0

Dears,
We want to configure system monitoring for our EP 6.0 server on Solman 7.0
I have added EP in smsy by SLD activation.
Shivam

Hi Shivan,
Pls check this blog & links
How to perform a complete HTTP trace for SAP Enterprise Portal application? Try SAP Solution Manager Diagnostics
/people/zhaogang.li/blog/2005/08/29/how-to-perform-a-complete-http-trace-for-sap-enterprise-portal-application-try-sap-solution-manager-diagnostics
You need to config solman diagnostics.....
https://websmp105.sap-ag.de/diagnostics
http://help.sap.com/saphelp_nw04/helpdata/en/2c/525e3c1852d733e10000000a114084/frameset.htm
/people/luisfelipe.lanz/blog/2006/02/07/installing-a-solution-manager-diagnostics-the-easy-way
Root Cause Analysis for SAP MDM 5.5 SP06 with SAP Solution Manager Diagnostics
/people/detlef.thoms/blog/2008/04/15/root-cause-analysis-for-sap-mdm-55-sp06-with-sap-solution-manager-diagnostics
Regards
Prakhar

Similar Messages

Configure System monitoring in SOLMAN

Hi
I need some help on this. For now I have installed solman / windows 2008 / oracle 10g on VM. A test system has been added as a satellite system in solman. CCMS Agent and CCMS PING has been installed in the satellite system. I am able to use my Alert monitor in solman to check out alerts from the satellite system. what do I need to do next to integrate this with solution manager?
I have reads the document http://help.sap.com/saphelp_sm40/helpdata/EN/0b/160419162a476380b5608e7f27a742/content.htm
This talks about "Setup system monitoring" and going into change mode. I dont see the change mode or the option to setup system monitoring.
PS: SMSY is setup correctly, I can see my satellite system from there.
any ideas on how to proceed will be appreciated.
thanks
ravi

The "Setup system monitoring" option showed up after in went into solutions overview in solution_manager Tcode and clicked on a number (hyperlink) under System monitoring for SAP Solution Manager Reference

SALRT_CREATE_API with CBMA and/or Central Monitoring using Solman

Hi,
Does anyone know if function SALRT_CREATE_API can be used to raise alerts in Component Based Message Alerting (CBMA) and/or Centralised Monitoring in Solman? I understand SALRT_CREATE_API worked with the classic Alert Framework.
Che

Hi Michal,
Thank you for jumping in on this thread. Great timing with your blog
However the following thread suggests we can still use SALRT_CREATE_API:
XI Alerting and Central Monitoring : some alerts remain on PI
"Try removing the "CentralMonitoringServer-XIAlerts" RFC connection from both systems (proxy and PI). Then, ensure all com.sap.aii.rwb.server.centralmonitoring.* parameters are configured correctly on PI (restart system to apply changes on exchange profile) and try executing the scenarios again.
Check the target CCMS system the RSALERTDISP report and see if the alerts are being received there."
Perhaps the above only applies in the case of a dual stack? I am not quite ready to try some examples but when I do then perhaps options will become clearer to me. I will try to remember to update this thread with what I find.
Thanks
Che

Job Monitoring with SolMan or CCMS

Hi,
does anyone know, how to monitor jobs and zjobs within the SolMan? Or using CCMS?
Thank you

Hi Timm,
you should evaluate Business Process Monitoring capabilities within SAP Solution Manager. It offers functionality for a technical job monitoring.
You will find further information (for example detailed setup guides) in Service Marketplace: http://www.service.sap.com/bpm -> Media Library
Check the information on configuration in the Solution Manager IMG (transaction SPRO -> SAP Reference IMG -> SAP Solution Manager Implementation Guide ->SAP Solution Manager -> Scenario-Specific Settings -> Operations -> Business Process Monitoring.
Best regards
Ruediger Stoecker

MAXDB of Cont, Server monitor by SolMan on db2. Possible?

I have just installed Content Server 640/MAXDB 7.6.
Everything I have read suggests monitoring is by SAP.
My solution Manager (and all my SAPs) runs on Db2.
Is it possible to monitor MAXDB on content server with DBACOCKPIT of Solution Manager which runs on Db DB2:
Solution Manager is latest release and Support package: SM 7 w NW Enh 1 @ SP 25.
If it is possible is there step by step instructions anywhere? Do I need MAXDB client software on SolMan?
Ken Chamberlain

Hello Ken Chamberlain,
yes, you can.
Reference - SAP note:
990602     FAQ: CCMS for MaxDB/SAP liveCache technology
< Pay attention to the answer on the question 9. >
Following steps need to be done:
Install the database dependent MAXDB DBSL SAP kernel part on the SolMan application server;
Install the MAXDB client on the SolMan application server;
   Review the SAP notes:
     822239                          FAQ: SAP MaxDB Interfaces
     822271          FAQ: SAP MaxDB client software
Create the MAXDB connection in /ndb59.
    Use the /ndb50n to monitor the MAXDB database.
Follow the MAXDB documentation at
    < DBACOCKPIT: Start DBA Cockpit (as of SAP Release 7.0) >
http://maxdb.sap.com/doc/7_7/default.htm
-> Database Administration in CCMS: SAP MaxDB
Regards, Natalia Khlopina

Display CCMS Monitor in SolMan

Dear Community,
is it possible to display an selfmade ccms monitor from a satalite system in the Solution Manager?
Thanks for answers,
Matthias

Hi Matthias,
If you go to RZ20 and go into maintenance mode there is an option to transport the monitor set. So create a new transport, release it and import it into your Solution Manager.
As far as I know it is not possible to "source" it into the solution manager.
Kind regards,
Sjoerd Lubbers

Error in solution monitoring in solman

Hi all,
I am configuring solution monitoring in Solution manager i have created RFC connections and CCMS conectivity in T-Code DSWP but in option Copy Custmoizing i am not able to get the Destination system details pls helpme.
Omkar
Regards,

Hi Omar,
Can you proviede more details on what you are doing and on what are willing to get?
Regards,
Valdecir

Availability Monitoring from Solman

Dear community,
we are using availability monitoring with CCMSPing from our Solution Manager as central monitoring system. We tried to configure a central autoreaction method that send automatically emails if a syste is down. That works for all other configured MTE-classes but not for the availability classes.
What could be the issue with that?

Hello Christoph,
> availability monitoring with CCMSPing from our Solution Manager as central monitoring system.
> We tried to configure a central autoreaction method
the information regarding the availability is stored locally in your central monitoring system therefore a central autoreaction will not work here (because there is no agent that will trigger this).
As a consequence you have to configure an additional autoreaction that is started in dialog. Please note that the local autoreaction will be started in client 000 so you need also to configure SAPconnect in this client.
Regards, Michael

BI Process chain monitoring from SOLMAN

Hi,
We have configured CEN in our landscape and successfuly managed to get data from satellite systems and getting alerts according to our requirement.
But for BI Process chain Monitor we are getting alerts of yellow MTE with text "Entire chain now has status 'A'", which is flooding our mailbox. We cant find any way to stop this and to receive mails only for failed process chains i.e. for red MTE.
Can you please help us in this?
Thank you,
Lena

Hello Marco,
the problem is that the Process Chain monitor is not yet available with ST-A/PI 01L*. Unfortunately the empty hull that you see during the setup was shipped without the proper content. The Process Chain monitor will be properly shipped with the next ST-PI and ST-A/PI combination in Q2/2010.
Sorry for any inconvenience caused.
If you want to have this monitor earlier on it could be implemented via Customer Exit in case that you have some MaxAttention or Safeguarding engagement.
Best Regards
Volker

Queue monitoring in Solman through CCMS

Hi All,
Can some one please help me to know how Queue monitoring(SMQ1 and SMQ2 in ECC system) is possible through CCMs.
Would be thank ful if somebody can provides me steps as to how we can configure queue monitoring.
Thanks You all in advance.
Regards,
Prerna

Hi Prerna,
Please go through the below SAP Note and a link which will help you to configure Queue Monitoring in CCMS.
441269 - Setting up tRFC/qRFC monitoring in the alert monitor
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting
Let me know if You face any more Issues for the same.
Thanks
Ajitabh

Business Object system monitoring from SOLMAN

Hi,
We have recently installed SAP Business Objcts in a seprate system and now we want to include this system in SOLMAN for early watch alerts.
can any one provide the document/setps on how to include our Business Object system in SOLMAN.
Thanks * Regards,
KVR.

Kasi
I could not find any BO specific talks about SolMan and EWA in particular
Did you already tried to add the system like a regular NW based system via SMSY? I guess you can use the regular procedure here
Nesimi

System monitoring in solman 3.2

Hi,
We are having solution manager 3.2. We need to monitor R/3 server from solution manager system. Completed setting up of SMSY for R/3 server, tested RFC. Getting some issues on solution_manager transaction. Can anyone explain the steps of doing solution_manager(DSWP) transaction to enable the monitoring of CPU,memory etc.
Thanks,

It's hard to describe but I am trying do my best here.
In DSWP transaction, click your solution, then Solution Monitoring and click Setup System Monitoring, it will bring you a screen so you can activate monitoring and define what you want to monitor and its criterias.
CPU monitoring is defined under your server name
Memnory Mngt is under your instance name.
Thanks,
Yujun Ran

Solman 7.0 : setup system monitoring

hi
I am taking an error while I want to configure the system monitoring in solman 7.0
solution monitoring-->sys monitoring --> setup sys monitoring
the CCMS Read Destination status is RED.but I have tested the CCMS Read Dest. by double clicking related section .it is ok.(sm59)so connection is ok .
have you got any idea ?
regards

hi
I have checked auth check via sm59 . it is failed.conn test is ok
the error is like this : "user or pass is not true"
what is your suggestions?
thanks in advance

PI monitoring setup in Solman 7.1

Hi Experts
I have to setup PI monitoring in solman 7.1 I have followed following document for this:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/408e1501-fb8c-2e10-edba-f51f13cde64e?overridelayout=true&51556787604320
"Setup GuideCentral Monitoring of SAP NetWeaver Process Integration 7.3 with SAP Solution Manager 7.1"
As per this guide following are the prerequisites for this setup:
–Landscape Setup (once/per PI SLD)---Done
–Managed System Configuration (per Technical System)---Done
–System Monitoring Setup (per Technical System)----Done
–PI Monitoring Setup (per PI Domain)--- Not able to see the PI domains in step 4 (define scope)
The solman SLD version is 7.0212.20120528123254.0000
Can you please suggest some solution so that I can get the PI domains listed in PI monitoring
Thanks in advance

Hello Vineet,
Please also see the following Central PI Monitoring Documentation and Help Area Wiki page which includes How to/Installation/Setup and Troubleshooting guides:
PiMon_Home - Technical Operations - SCN Wiki
Regards,
Ruth

Solman system configuration to monitor a ECC system

Hi Experts
I know theer is something called system monitoring in solman system.
Can you help me wtith the guide of solman 7.0 to do such configuration.
Cheers
Pooja

i have referred all these links.
but not what i wanted.
i am looking for a guide for system monitoring purpose.
to configure a ECC/NW to solman and monitor its performance.
Can any one help me in this.
Regards
Pooja

EP 6.0 Monitoring by Solman 7.0

Similar Messages

Maybe you are looking for