EP 6.0 WAS 6.20 and BW 3.0B
Hello,
I have a working BW 3.0B sandbox where we would like to evaluate EP 6.0. What are my options in terms of installation. Do I need to install an instance of WAS 6.20 and a separate instance of EP 6.0 ? or can I install WAS 6.20 on the same instance as BW 3.0B and a separate EP 6.0 instance.
What are the possible combinations for the above software.
We do not want to use WAS 6.40 and BW 3.5 right now but want to evaluate EP 6.0, in which case what are my options.
Thanks in advance
Ravi
Hi,
Though i am not able to interpret your query perfectly, i would like to give it a try.
You mean to say you have BW3.0B Sandbox and you would like to integrate it with EP6.0. Now your question is how can you do that?
I would say you install an instance of WAS 6.20 on a server and install your EP6.0 on top of it.
Does that answer your question?
Similar Messages
-
My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?
DonM. wrote:
Hi
Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
Cheers. Don
No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac or an Apple refurbished iMac to save money. -
Hi ,
I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username was not correct. Verify that it was entered correctly and try again".
I tried running this command also "stsadm -o updatefarmcredentials -userlogin <domain\username> -password <newpassword>" but when it got executed it showed me "Access Denied".
What should i do ??
Thanks in advance.
Regards, AnuragHI,
right click on command icon and click run as administrator then use above stsadm commend to update credential. If still you face same issue then try with powershell as mention in below link: (make sure that you open sharepoint powershell as run as administrator)
http://smartrider.wordpress.com/2010/07/15/powershell-script-to-create-web-application-and-site-collection-in-sharepoint-2010/
let us know your result
Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer -
I was editing photos and it was getting stuck or frozen and working very slowly. I attempted to restart the computer but it would not allow me to quit aperture. Now aperture appears in my toolbar but will not open up so I can work on any photos. Any ideas?
Did you try opening from the Applications folder?
Depending on how far that gets you, I would also take a look at the Troubleshooting Basics. -
i just connected my ipod touch 4g to my laptop and there is an update 4.3.3 available i was downloading it and just as it finishes it says your network session has timed out what ca i do? HELP ASAP PLEASE!!!
Try a direct download:
iPod, iPhone and iPad Firmware Download
Manually install it by holding your "Option" key down when clicking on the "Restore" button in iTunes and select the firmware file you downloaded. -
Hi
My outlook account was recently hacked and they have changed my passwords, secret questions and my information meaning i am unable to access this account. I have the hacked account set up on icloud for all of three apple devices. I have been reading online that to change or delete an account i need to login, or turn find my iphone off which i cannot do without the password!
I would be really grateful if anyone knew a way i could sort this out to fully delete the old icould account.
Thanks very much!Contact the Apple account security team for your country and request assistance: Apple ID: Contacting Apple for help with Apple ID account security. If you can prove your identity to them, they can reset the password and help you regain control of the account.
-
Hello, my name is Karan Taneja and i have been a loyal Apple customer.
I have been using Apple since it introduced iphone 4 and have been upgrading/buying every new phone Apple introduces after that.
I was always happy and surprized to see Apple doing so good to its customers.
Unfortunately, i experienced some thing really unprofessional and different this time.
It begun suddenly one day when i tried to charge my phone, the phone was on silent mode and as usual the phone vibrated when i kept it for charge.
After a few seconds the phone vibrated twice or thrice again when i re-inserted the cable thinking it might be loose.
It continued to charge well when i left the room for 2 hours and finally when i returned i could see a damaged i phone 5
lying on the floor and the phone vibrating continuously and i figured out there was a fault with the cable and the
current wasnt flowing continuously due to which the phone continued to vibrate and fell off the shelf.
Next day i took the iphone to Apple service centre at Saket which was closed.
Thinking its August 15 and so the store might be closed i went back to home and waited for the next day but unfortunately could not turn up since
i had to go to work on odd timings.
I again went to the same service centre on 17th August 2013 and saw the service centre closed again when i tried to contact
the other service centre and was informed about Saket's service centre already been shut down.
There was no hoarding/ banner any kind of intimation for the customers.
Since 18th August was Sunday and i was occupied on 19th August i went to service centre at Ansal Plaza Khel Gaon Marg on
20th August 2013 to complaint about the Faulty Cable and the damaged caused to my iphone 5 due to the same.
I very well explained the same to one of the person at the receiving desk at the service centre who accepted the cable
but explained me that he doesnt have the authority to accept my iphone without permission from the technical support people
who will be able to help me in that case and gave me the toll free number.
i Tried to reach the toll free number and finally managed to get online with a technical support executives who too all my details and
summary of the problem i experienced and finally kept me on hold for almost 10 minutes ormore after which he said he said that my
case cannot be considered and while the discussion was on, the call was disconnected and i was left frustrated as i still was at the service centre
but finally i left with no hope from Apple .
I tried to reach again at the toll free number, and finally managed to talk to a well behaved person who assured me of considering my case and suggested
me to go back to the service centre and advice the the person at the recieving end there to get me connected to the technical support team when i reach so that i could
submit my phone but, since, it was already around 4:30 and the service centre was about to shut and due to traffic
conditions all around i thought of visiting the service centre next day.
On 21st August 2013, i went back to the service centre and spoke to the one of the store person who adviced the case to the manager Mr. Alok ( as i remember )
who was really rude to tell me that i will have to call the technical support team on my own and then he will connect and that its not his work and all that .
I finally connected to one of the senior technical support executives Mr.Mohamed Azharuddin K who understood my concern and spoke to the manager of the store to accept
my iphone.
My iphone was finally collected and i was assured i would get a call back next day from the service centre about the update.
It was now 22nd August 2013, no update was given,no call was received, i tried to call the service centre at 12:30, they were unaware about my case and knew only about the cable and said will call me
back very shortly.
I called back at 2:30, still no update, at 4:30 i called back again when i was told that my case cannot be considered and i can collect my phone.
Similar discussion was held with Mr.Mohamed Azharuddin K.
I knew by the time i will reach the service centre would again close.
He told me that my case cannot be considered since the cable was recieved in the dead condition and wasnt working at all unlike what i told him about the cable.
On 23th August 2013, i went back to the service centre and collected my phone. When i asked about my old cable and told them that it was working and i wanted the technician
to check it properly when i handed it over, they had no answer but to say its already shipped. I spoke to the manager who said that he never told any body that the cable
was received in dead condition and he only conveyed to other authorities that the cable had fault .
I finally dont know what to do and came back with the new cable.
I just visited my time, petrol and parking charges in getting the cable replaced.
If i calculated i have spent around 16 hours and 2000 worth of money in just getting the cable replaced and have a broken phone in hand.
More than a weeks torture.
Is that the way apple compensates for its fault ????????????????
I will make sure that i never buy any thing from Apple and advice all the people i know to not trust Apple blindly.Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off. -
I Was on Instagram and I clicked a link that lead me to safari and when I got there a box kept coming up and saying a b c d e f g.... And so on. It won't let me delete the tab and I can't even use safari, can someone please help!!!!!??????
Quit Safari completely, clear Safari and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the Safari app icon. Tap the home button or anywhere above the task bar.
Go to Settings>Safari>Clear History, Cookies and Data.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up -
I got my ipad2 replaced yesterday. And this new ipad started giving me problem by crashing aps. Then I restored the ipad twice but the problem was still there. I called apple and they fixed it by doing Reset All Settings. But now I have this weird problem. When I open Mail the screen flickers random blue and gray appeared on the screen. I took a video too. Will that happen again? Is it hardware problem? This ipad2 32GB was replaced yesterday and I think it is refurbished. Are replace product refurbished?
There is no way for anyone here to know if your replacement iPad is a refurbished unit. Per Apple's replacement policy, replacements can be refurbished units. If you feel the unit is not working correctly, take it back, let them check it out and if found defective, they will replace that unit.
-
I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off
Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.
-
Last night my iphone screen all of a sudden was solid blue and now it is black. I tried turning it on and off. Still nothing appeared on the screen. I put it on the charger and this morning it is totally black. However, when I hit the on and off button, I did hear the text message signal go off. When I turned the volume on and off a big white bell flashed. In the last week, there were some other display problems such as the screen blowing up large. The only way to fix it was to turn off the phone and then turn it back on.
What does all of this mean? It seems like I've had these problems since the iphone 4 upgrade.just do reset, press home button and power butoon for a while untill you can see apple
gud luck -
I was in Lightroom and had a power surge and now Lightroom will not launch. It encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix the next time it launches. I have shut my system down and Lightroom still will not launch. Does anyone have any suggestions?
delete your preview cache (.lrdata folder).
Here has location:
Preference and other file locations in Lightroom 5
If not enough info, search this forum for "delete preview cache".
Rob -
I was recently burglarized and lost a bunch of Apple products. Is there a way to get receipts for items purchased with my Apple ID?
Yes if you go to http://store.apple.com/ on the top right under the search it will say "Account" or your first name. You will click or tap that and you will click "check order status" sign in. After you do that in the middle by the order date and number it will say "print invoices" and as long as your item(s) have been ship you will be able to see and print your invoice receipts. you can view items purchased in the last 18 months.
-
I was updating my iphone, there was an error and now it won't let me restore a backup. What do i do?
I was updating to the latest version of IOs 7 last night and when i woke up there had been an error with the update. When I tried to use my iphone the next morning it said there was an error and i needed to restore it. I did and now it is not letting me restore from backup. I backed up the phone with itunes just before doing to update. I'm so frustrated, now what do i do? it says to go to an apple store or something but i dont live near to one. Anyone suggestions?
What, exactly, happens when you try to restore it?
-
I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?
Hold the Option key down and restart. Select one of the drives that comes up and hit the Return key.
-
my iphone 5 was just stolen and i dont have the find my phone app or any other tracking app installed previously. how can i locate my device?? please help
If you didn't set up Find My iPhone in the iCloud settings, then you can't. Notify the police and change the password to your Apple ID and any other online services you used from that iPhone, just as a precaution.
Regards.
Maybe you are looking for
-
Tips & Tricks for daily forum reading?
At one point in time I used to visit the Arch forums quite actively in my efforts to contribute back to the community. More recently, I've stopped reading the forums but I now wish to get back into the "swing of things" and read/write the forums dai
-
TDS not deducted at the time of Give advance to vendor -F-48
Hi gurus, I am facing issue related to TDS deduction at the time of vendor down payment. actually at the time of invoice the tds deduction are made properly. but when i give the advance to vendor the tds is not deducted or no popup screen display at
-
Fpga compile error Port width mismatch
When I try to compile a FPGA vi, the following error occurs. LabVIEW FPGA: The compilation failed due to a Xilinx error. Details: ERROR: [Synth 8-549] port width mismatch for port 'cEIOParameter0Signal': port width = 32, actual width = 24 [C:/NIFPGA
-
says "an error occurred while trying to confirm account info, check network connection" i am connected to network, iphoto is updated, what else can i try?
-
Attaching the documents to customer transaction screen
Hello Experts, Greeting of the day!! One of my client wants to attached a scan document of received transaction in a Customer transaction screen, Now i m confuse whether this is possible in oracle Applications R12.1.3 or not? If yes then please guide