EP 7.1 with CE 7.1 not properly set up?

Hi,
We've installed a CE 7.1 with EP 7.1.
Now I want to create systems (connections to ERP, PI), SSO and JCo connections on the portal.
Problem is that the KeyStoreManager menue/ link (Systemadministration/Systemconfiguration/KeyStoreManager) is missing.
Furthermore the Content Administration/ Web Dynpro: page/ iview is not displayed, I get a runtime error instead. I wanted to create the JCo's there.
The connection tests fail for all systems.
I've done this work many times before on EP 6 and never had these problems.
It looks like the portal itself has not been set up properly or many objects like iviews are missing.
I've been looking for the iView Administration.keyStoreManager for instance and it seems not to exist within our portal.
Or have all these things changed in EP 7.1 and I just have to learn from scratch?
Thanks for your advice!
Karsten

Hi,
You can access the keystorage using the below link:
http://<hostname>:<port>/nwa/key-storage
The webdynpro administration page should be accessible the regular way using the URL http://<hostname>:<port>/webdynpro/welcome
If you are not able to display it, it could be an authorization issue. Make sure the j2ee_admin user has all the requried roles assigned.
Thanks,
Sai.

Similar Messages

I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

verify on another Mac if the same
WD is having issues with mavericks as you can see on the WD forum, did you install any WD software (never do that) when you connected the drive for the first time?
possible issue is a dead SATA bridge card or the new WD firmware w/ Mavericks.
SATA card issue
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
verify on another Mac if all possible

Samples number is not properly set with VI Express Write To Measurement File

Hello,
I have a strange problem with the VI Express Write To Measurement File.
When I generate the .lvm file the samples number for each channel is equal to 1
instead of 34 !
So when I use the VI Express / Input / Generate an arbitrary signal and I want to import
the generated signal... only one point (the first one) is imported...
I can manualy fix it by changing samples number in the lvm file using a text editor but that's a (very) dirty hack !
Here is an example of the generated LVM file
LabVIEW Measurement
Writer_Version    0.92
Reader_Version    1
Separator    Tab
Multi_Headings    No
X_Columns    One
Time_Pref    Absolute
Operator    scls
Date    2008/04/12
Time    10:35:58,322057
***End_of_Header***
Channels    2
Samples    1    1
Date    2008/04/12    2008/04/12
Time    10:35:58,323057    10:35:58,323057
X_Dimension    Time    Time
X0    0.0000000000000000E+0    0.0000000000000000E+0
Delta_X    1.000000    1.000000
***End_of_Header***
X_Value    Untitled    Untitled 1    Comment
0.000000    0.000000    20.000000
0.082000    10.000000    20.000000
0.182000    10.000000    25.000000
0.282000    20.000000    25.000000
0.382000    20.000000    30.000000
0.482000    30.000000    30.000000
0.582000    30.000000    35.000000
0.682000    40.000000    35.000000
0.782000    40.000000    40.000000
0.882000    50.000000    40.000000
0.982000    50.000000    45.000000
1.082000    60.000000    45.000000
1.182000    60.000000    50.000000
1.282000    70.000000    50.000000
1.382000    70.000000    55.000000
1.482000    80.000000    55.000000
1.582000    80.000000    60.000000
1.682000    90.000000    60.000000
1.782000    90.000000    65.000000
1.882000    100.000000    65.000000
1.982000    100.000000    70.000000
2.082000    110.000000    70.000000
2.182000    110.000000    75.000000
2.282000    120.000000    75.000000
2.382000    120.000000    80.000000
2.482000    130.000000    80.000000
2.582000    130.000000    85.000000
2.682000    140.000000    85.000000
2.782000    140.000000    90.000000
2.882000    150.000000    90.000000
2.982000    150.000000    95.000000
3.082000    160.000000    95.000000
3.182000    160.000000    100.000000
3.282000    170.000000    100.000000
PS : I also post my problem at
http://forums.lavag.org/Strange-behaviour-of-VI-Express-Write-LVM-t10570.html&gopid=44101#entry44101
Attachments:
generate_step_lvm.vi ‏119 KB

If I use the "one header per segment" option I get the following LVM file (see below)
But the problem is same !
I can't import this file in VI Express / Input / Generate Abitrary Signal (I only get one row... the first one)
I see three solutions :
- VI Express Write LVM has a bug ?
- I don't know how to use this VI Express correctly !
- VI Express / Input / Generate Abitrary Signal has a bug ?
LabVIEW Measurement
Writer_Version   0.92
Reader_Version   1
Separator   Tab
Multi_Headings   Yes
X_Columns   One
Time_Pref   Absolute
Operator   scls
Date   2008/04/12
Time   16:38:37,578
***End_of_Header***
Channels   2
Samples   1   1
Date   2008/04/12   2008/04/12
Time   16:38:37,592999   16:38:37,592999
X_Dimension   Time   Time
X0   0.0000000000000000E+0   0.0000000000000000E+0
Delta_X   1.000000   1.000000
***End_of_Header***
X_Value   Untitled   Untitled 1   Comment
0.000000   0.000000   20.000000
Channels   2
Samples   1   1
Date   2008/04/12   2008/04/12
Time   16:38:37,717   16:38:37,717
X_Dimension   Time   Time
X0   1.3899993896484375E-1   1.3899993896484375E-1
Delta_X   1.000000   1.000000
***End_of_Header***
X_Value   Untitled   Untitled 1   Comment
0.139000   10.000000   20.000000
Channels   2
Samples   1   1
Date   2008/04/12   2008/04/12
Time   16:38:37,739999   16:38:37,739999
X_Dimension   Time   Time
X0   1.6199970245361328E-1   1.6199970245361328E-1
Delta_X   1.000000   1.000000
***End_of_Header***
X_Value   Untitled   Untitled 1   Comment
0.162000   10.000000   25.000000
and so one ...

Autodetection not properly setting up wacom tablet

I have a tablet PC, and recently upgraded to xserver 1.6. X would freeze on startup roughly 50% of the time until (based on this thread) I removed xorg.conf (except for DontZap). Now X doesn't freeze on start, but the tablet is only being partially detected.
I can use it to move the cursor fine. The eraser does not work.
'xsetwacom list dev' does not detect any devices. This means I can't get or set any properties, recalibrate, rotate, or any other goodies.
output of 'xinput list' seems to indicate that it's being set up as some kind of generic plug-and-play device.
"Virtual core pointer" id=0 [XPointer]
Num_buttons is 32
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is -1
Max_value is -1
Resolution is 0
Axis 1 :
Min_value is -1
Max_value is -1
Resolution is 0
"Virtual core keyboard" id=1 [XKeyboard]
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"TPPS/2 IBM TrackPoint" id=2 [XExtensionPointer]
Num_buttons is 32
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is -1
Max_value is -1
Resolution is 1
Axis 1 :
Min_value is -1
Max_value is -1
Resolution is 1
"ThinkPad Extra Buttons" id=3 [XExtensionKeyboard]
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"PnP Device (WACf008)" id=4 [XExtensionKeyboard]
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
Num_buttons is 32
Num_axes is 6
Mode is Absolute
Motion_buffer is 256
Axis 0 :
Min_value is 0
Max_value is 24576
Resolution is 2540
Axis 1 :
Min_value is 0
Max_value is 18432
Resolution is 2540
Axis 2 :
Min_value is 0
Max_value is 255
Resolution is 1
Axis 3 :
Min_value is -64
Max_value is 63
Resolution is 1
Axis 4 :
Min_value is -64
Max_value is 63
Resolution is 1
Axis 5 :
Min_value is 0
Max_value is 1023
Resolution is 1
"AT Translated Set 2 keyboard" id=5 [XExtensionKeyboard]
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Macintosh mouse button emulation" id=6 [XExtensionPointer]
Num_buttons is 32
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is -1
Max_value is -1
Resolution is 1
Axis 1 :
Min_value is -1
Max_value is -1
Resolution is 1
"Video Bus" id=7 [XExtensionKeyboard]
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
Here's Xorg.0.log. This used to have separate sections for Stylus/Eraser/Cursor all being set up.
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux malachite 2.6.29-ARCH #1 SMP PREEMPT Fri Apr 17 12:46:01 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 23 16:07:36 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(**) Option "DontZap" "no"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8100000/1048576, 0xe0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8200000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.6.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xF8100000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LEN", prod id 16386
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): EDID vendor "LEN", prod id 16386
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000206 to 0x80000246
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 481024 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1924092 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xf8100000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d400000 (pgoffset 54272)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0e000000 (pgoffset 57344)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0077f000-0x0d3fffff: DRI memory manager (209412 kB)
(II) intel(0): 0x0d400000-0x0dffffff: exa offscreen (12288 kB)
(II) intel(0): 0x0e000000-0x0fffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000: start of memory manager
(II) intel(0): 0x0079f000-0x00b9efff: depth buffer (4096 kB) Y tiled
(II) intel(0): 0x00b9f000-0x00f9efff: back buffer (4096 kB) X tiled
(II) intel(0): 0x00f9f000-0x0139efff: front buffer (4096 kB) X tiled
(II) intel(0): 0x0139f000-0x0139ffff: overlay registers (4 kB)
(II) intel(0): 0x013a0000-0x013a9fff: HW cursors (40 kB)
(II) intel(0): 0x0d400000: end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): [drm] mapped front buffer at 0xe0f9f000, handle = 0xe0f9f000
(II) intel(0): [drm] mapped back buffer at 0xe0b9f000, handle = 0xe0b9f000
(II) intel(0): [drm] mapped depth buffer at 0xe079f000, handle = 0xe079f000
(II) intel(0): [drm] mapped classic textures at 0xee000000, handle = 0xee000000
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 245 x 184
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) Option "Emulate3Buttons" "true"
(II) TPPS/2 IBM TrackPoint: Forcing middle mouse button emulation on.
(**) Option "EmulateWheel" "true"
(**) Option "EmulateWheelButton" "2"
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device ThinkPad Extra Buttons
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event7"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device PnP Device (WACf008)
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-2 $
(**) PnP Device (WACf008): always reports core events
(**) PnP Device (WACf008) device is /dev/tts/0
(**) PnP Device (WACf008) is in absolute mode
(**) PnP Device (WACf008): forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) /dev/tts/0: Tablet PC buttons are on
(**) Option "BaudRate" "9600"
(**) PnP Device (WACf008): serial speed 9600
(II) XINPUT: Adding extended input device "PnP Device (WACf008)" (type: Wacom Stylus)
(**) Option "Device" "/dev/tts/0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
usbDetect: can not ioctl version
Wacom ISDV4 control data (0) error in % query
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (38400) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "PnP Device (WACf008)" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Last but not least, the output of lshal relevant to the wacom device, which seems to indicate that it knows something is there. there are no event devices associated like there are with kbd/mouse/etc.
udi = '/org/freedesktop/Hal/devices/pnp_WACf008'
info.linux.driver = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (WACf008)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_WACf008' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string)
pnp.id = 'WACf008' (string)
pnp.serial.irq = 5 (0x5) (int)
pnp.serial.port = '0x200' (string)
udi = '/org/freedesktop/Hal/devices/pnp_WACf008_serial_platform_0'
access_control.file = '/dev/tts/0' (string)
access_control.type = 'modem' (string)
info.callouts.add = {'hal-acl-tool --add-device', 'hal-setup-wacom', 'hal-setup-wacom'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'serial', 'access_control', 'input', 'input'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/pnp_WACf008' (string)
info.product = 'PnP Device (WACf008)' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_WACf008_serial_platform_0' (string)
input.device = '/dev/tts/0' (string)
input.x11_driver = 'wacom' (string)
input.x11_options.ForceDevice = 'ISDV4' (string)
input.x11_options.Type = 'stylus' (string)
linux.device_file = '/dev/tts/0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a/tty/ttyS0' (string)
serial.device = '/dev/tts/0' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/pnp_WACf008' (string)
serial.port = 0 (0x0) (int)
serial.type = 'platform' (string)
wacom.types = {'eraser', 'touch', 'eraser', 'touch'} (string list)
grateful for any suggestions anyone has beyond this point.

well, the answer is easy but I am annoyed to have wasted so much time figuring it out.
it is this: the linuxwacom-dev package seems to have installed hal-setup-wacom to /usr/libexec/, and as a result hal cannot find it.
just doing:
cp /usr/libexec/hal-setup-wacom /usr/lib/hal
gives me a working eraser (after restarting hal and then restarting X).
EDIT: also, if "xinput --list --short" does not list devices with the standard names stylus/eraser, then to get xsetwacom running properly put this in a script and run it from /etc/rc.local: (script stolen from another forum)
#! /bin/sh
for udi in `hal-find-by-property --key input.x11_driver --string wacom`
do
type=`hal-get-property --udi $udi --key input.x11_options.Type`
hal-set-property --udi $udi --key info.product --string $type
done
I tried to write this logic into the fdi policy, but somehow couldn't get it to work.
Last edited by tlawson (2009-04-30 20:08:35)

ORA-12505 - AIX - ProC/C++ - [AIX environment not properly set to NLS?]

I DO need some help here!
I have a C++ program accessing an Oracle 8.0.5 database ( which is set up for american_america.weiso8859p1 as the default language PLUS one more being: brazilian portuguese_brazil.weiso8859p1.
When I log to the server which hosts the executable and try to run the application, I get the error ORA-12505 as soon as I try to connect to the database, but the error message can't be displayed, and instead, my exit routine displays: " Error while trying to retrieve text for error ORA-12505 "
If, alternatively, I log to another server THEN issues a telnet to the the server which hosts the executable and try to run the application, I get the programm to run nicely.
The settings of the environment variables ORA_NLS33 and NLS_LANGUAGE have been coded inside the C++ program (among first things in main) but it seems these settings have no effect in solving the problem.
The server which hosts the application has an AIX 4.3.3.0 operating system.
The server from which I issue the telnet command has an AIX 4.2.1.0 operating system.
What are the things that must be set in AIX in order to correctly access the Oracle database? Where can I get this type of information?
I do apreciate any clues to solve this problem of mine.
Thanks!

Sounds like this is a configuration problem:
ORA-12505: TNS: listener could not resolve SID given in connect descriptor
Cause: The SID in the CONNECT_DATA was not found in the listener's tables. This error will be returned if the database instance has not registered with the listener; the instance may need to be started.
Action: Check to make sure that the SID specified is correct. The SIDs that are currently registered with the listener can be obtained by typing "LSNRCTL SERVICES <listener name>". These SIDs correspond to SID_NAMEs in TNSNAMES.ORA, or DB_NAMES in the initialization file.

Tp import flag not properly set in "STMS", tp-processe not ended

since last Stopping of our Q-System the display in of the import queue doesnt work fine. when we transport requests from the development-system to the q-system the truck-icon doesn't disappear. the processes in AIX are not finished, after time the "overview of the transport logs" shows that the import is done, but the truck doesn't disaappear
we tested the transport tool (RSTPTEST): o.k., in the TMS configuration we made the communication test: o.k.
sometime we can make the truck disappear, when we delete the .LOB in /usr/sap/trans/tmp but this doesn't work with all requests

Check the Import monitor and the tp system log. If the truck icon still shows is most likely because the Import is not fully finished, As I said check the import monitor and let us know what it says.
Regards
Juan

Configtool -- Secure Store Lib not properly set

when i open Config tool it will give pop like connect to database when i click yes it is giving error and when i click no and check in sec store lib the path is like this \hostnamescssapmn/SIDSYSglobalsecuritylib. Every time when i open the configtool i am phasing this error, every time i have to change the path of scure store lib.
ragards,
jagadish

Hi,
Please check config.properties at the location j2ee\configtool.
This has the path maintained for the secure store lib file along with other parameters.
Usually the contents are :
#Generated by Config Tool
rdbms.maximum_connections=5
system.name=
secstorefs.keyfile=
secstorefs.secfile=
secstorefs.lib=
rdbms.driverLocation=
rdbms.connection=
rdbms.initial_connections=1
Make sure above parameters are correctly configured. The error should not occur then.
Regards,
Snehal

After upgrading to OS 7.1.1 Maps no longer works correctly. It is constantly "locating" and does not do real time updating. Tried "Scout" map app it does the same thing. Do I have something not properly set up for viewing Maps the way I used top?

After upgrading my iphone 4s to 7.1.1 the Maps application does not work properly. It updates very slowly and is constantly "locating". Why is this happening after the upgrade? I also tried SCOUT App it is does the same thing. It seems like it is losing the GPS position. Is there a fix for this?

Any change after turning Airplane mode off and on and/or or after turning Location Services off and back on?
If not, any change after doing a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release?

Software required to communicate with the ipod is not working error, help!!

I've had my iPod nano for a while now, and it was working fine until I installed the new iTunes. Now, when I plug my nano in, iTunes won't start. Then, I open up iTunes, and it says "The software required to communicate with the iPod is not properly installed. Please re-install iTunes so you can re-install the iPod updater" or something like that. I've researched this problem, and found other things such as:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=1388732
When I saw what Markinmadison told me to do, I got to the registry editor, and tried to change the permissions and tried to delete the iPodService.iPpod Manager, but it would say "Cannot delete iPodService.iPpod Manager. Error while deleting key"
I have tried everything possible, and nothing has still helped. I would really appreciate help on this one.
Thanks!

to add, as I think this could be important and ive only just realised this, after running itunes diagnostics, it tells me that itunes helper is not running (but i checked and it seems it is) and no ipod is found (although as mentioned Windows recognises the drive).
It also tell me that the most recent ipod connected was the ipod that I had before.
** iPod/iPhone Connectivity Tests **
iPodService 7.6.1.9 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 1.14.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801FB/FBM USB Universal Host Controller - 2658. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 2659. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 265A. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 265B. Device is working properly.
Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPod nano (3rd Generation)
Serial Number: 7K7415ZVYXX

How to know via PowerShell "did user install office on his computer with office 365 or not"

Hello. Sorry for my english.
Subject: How to know via PowerShell "did user install office on his computer with office 365 or not"
I set to users Office 365 ProPlus license, that allows a user to install Office on up to five computers. I want to know, user use this opportunity or not, install office or not.
User can view his installation in the Office 365 portal:
But how I (like admin Office365) can view this information? Maybe via PowerShell?
Thank you...

Hi,
Please see the
blog, I copied the part of here:
====
Viewing a list of Office 365 ProPlus installations
A user can see which computers she has installed Office on by signing in to the Office 365 Portal and going to the
software page.
Only the signed in user can see this information. Even if you are the administrator for your organization's Office 365 subscription, you can't see this information in any of your Office 365 administrative views. This also means you can't deactivate
a user's installation of Office on a specific computer. More on deactivation in a bit.
====
If you have further question about Office 365, I recommend you post the question to Office 365 forum:
http://community.office365.com/en-us/f/148.aspx
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Cannot share to iMovie from the Quicktime x player. I get a pop up message that says "iMovie has not been set up".

I get a pop-up window when I try to share a movie with imovie "iMovie has not been set up". I have trashed the imovie plist and repaired permissions, I restarted imovie to see if that helps but to no avail. It is not a major issue but it would be nice to have that option seeing as I will be using imovie more frequently since Avidemux does not work on lion. All the other share options seem to function so I am a bit stumped as to why this option is not working.
Thank you for your time.

I get a pop-up window when I try to share a movie with imovie "iMovie has not been set up".
Have any of you actually opened/used iMovie yet? It appears the shared file is temporarily stored in an "iMovie Drop Box" which is placed in an "iMovie Events" folder either in the "Music" folder of the current user's account on the boot drive or placed in an "iMovie Events" folder at the root level of a non-booted hard drive. It is likely that if QT X can't find/can't see any "iMovie Events" folder, it will issue the "not set up" modal message you are seeing.
When working correctly, the QT X "iMovie" shared file is placed in the "iMoviie Drop Box" folder (even if it has to create a new folder initially) where it sits until you next open iMovie. When iMovie opens, it scans all available "iMovie Events" folders and if it detects anything in the drop box, will ask you if you want to import them. During import, the files are simply moverd from the drop box to the named_Event folder you specify. Be advised that if you delete the drop box from the "iMovie Events" folder, you may later get a different modal message telling you the system cannot find the "iMovie Drop Box" the next time you try to share a QT X file to iMovie.

IPod software not properly installed?

Suddenly everytime I open Itunes with my iPod nano 4G plug in.
Itunes says "The software needed to communicate with the iPod is not properly installed. Install iTunes again before installing the iPod software."
and removing iTunes and installing it again, does not work.
please, what should I do. ??

I had the same problem.
What happened to me anyways is that the files in the folder
c:/Program Files/iPod/bin/iPodService.Resorces/ were corrupted.
If you tried installing itunes again and that didn't solve it, Try seeing if the iPodService is running in
Administrator tools > Services.
If its not started, start it and see if that solves the problem.

In ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

in ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

Hi,
Lion has changed the way reminders (todos as was) work. They now seem to need to be in a seperate calendar.
In iCal open the File menu and select New Reminder List... and select where to put it.
Best wishes
John M

HT2509 i could use Burmese font with Zawgyi font in my previous iMac with Lion. Now I have a MacAir with Mountain Lion and i can not properly view Burmese fonts. Font book has 3 types of Burmese (myanmar) related fonts. Please help me to get proper displa

I could read Burmese font with Zawgyi Font in my previous Mac Book with Lion. I have MacAir Retina display with MountainLion and could not read Burmese fonts. Font books have 3 fonts for Burmese font and all are enable. Please help

pyoneaye wrote:
Font books have 3 fonts for Burmese font and all are enable.
What are the names of those fonts? Have you downloaded and installed the special Zawgyi font?
What is it exactly that you cannot read? Can you provide the url?

SRM MDM, Error, "Table with Code 'null' does not exist in repository"

Hi experts,
We has SRM MDM scenario, while doing OCI settings, we are able to connect with MDM repository but getting follwoing error message in portal, "java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Can You please suggest,
Thanks and Regards,
Munish

Hi everyone,
Sudhanshu and Anshuk:- Thanks for your response, let me try and explain the real scenario in details:-
We have deployed the SRM-MDM Catalog Search UI in Portal.
We tried accessing the http://<Portal Host>:<Portal Port>/SRM-MDM/SRM_MDM
Then we got a screen (Search UI App screen), where in we have provided the MDM Server name, then the MDM Server Password, then presses the Connect button, then below this, it displayed the Repository name created in the MDM. We have selected the Repository, then provided the Credentials of a User (Name: T_CORP) in MDM which has "Catalog Manager", and the "UI Configuration Manager" Roles. Please note that these Role names were created by us in MDM. Is it the right procedure or do we have any standard Roles delivered by SAP in MDM to map? If any standard Roles are available, where we need to check these.
Once the Credentials of MDM User is provided, and then selected the "Login" button.
Then we are getting the below error.
"java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Please clarify; we are not configuring any values in iViews. Where we need to do this, I mean name of the iView, and what values do we need provide generally? We are just running the Search UI App application; I don't think it is an iView, because the URL shows the Application name details, etc...
Please guide us, how to fix this Error.
Thanks and Regards,
Munish

EP 7.1 with CE 7.1 not properly set up?

Similar Messages

Maybe you are looking for