EP - BW myBudget issue - System error in program CL_RSR_WWW_RENDERER

Hi,
we are setting up EP 6.0 and BW 3.5 and are trying to use the workset 'myBudget'. We have been able to run the iViews that are based on R/3 Enterprise data.
Now we want to use the SAP delivered iViews for the BW reports. They run in the BW system but not in EP.
We get the error: "System error in program CL_RSR_WWW_RENDERER and form GET_DATA:02".
Do you have an idea what that means and how to fix it?
Thanks and regards,
Mathi

Hi 
Correct the URL by adding the string &snippet_operations= . 
 For Example the following URL: 
 http://ld0308.wdf.sap. corp:50020/sap/bw/BEx?sap-language=EN& bsplanguage=EN&CMD=LDOC&TEMPLATE_ID=TW_IMS_TEST_HIERDD 
 should then be changed to 
 http://ld0308.wdf.sap. corp:50020/sap/bw/BEx?sap-language=EN& bsplanguage=EN&CMD=LDOC&TEMPLATE_ID=TW_IMS_TEST_HIERDD&snippet_operations=
 Please check OSS Note 1041435 which addresses this issue.
 
Hope it helps. 
Cheers Abhijit

It's a good habit to reward someone with points in SDN if you think his/her
response was helpful to you

Similar Messages

System error in program CL_RSR_WWW_RENDERER and form SUBMIT_FILTER in WAD

Hi,
I get the message
System error in program CL_RSR_WWW_RENDERER and form SUBMIT_FILTER
randomly while running WAD report. Did anyone come across with the similar issue. Please let me know.


Hi 
Correct the URL by adding the string &snippet_operations= . 
 For Example the following URL: 
 http://ld0308.wdf.sap. corp:50020/sap/bw/BEx?sap-language=EN& bsplanguage=EN&CMD=LDOC&TEMPLATE_ID=TW_IMS_TEST_HIERDD 
 should then be changed to 
 http://ld0308.wdf.sap. corp:50020/sap/bw/BEx?sap-language=EN& bsplanguage=EN&CMD=LDOC&TEMPLATE_ID=TW_IMS_TEST_HIERDD&snippet_operations=
 Please check OSS Note 1041435 which addresses this issue.
 
Hope it helps. 
Cheers Abhijit

It's a good habit to reward someone with points in SDN if you think his/her
response was helpful to you

System error in program CL_RSR_WWW_RENDERER and form GET_NORM

when i exicute the query, after exicution if i right click on the character >go to the properties
iam getting the fallowing error-*System error in program CL_RSR_WWW_RENDERER and form GET_NORM (see long text)*

Hi Gandapudi,
The "Only values from Navigation" refers to get data with the posted values only.
You can specify how filter values are to be selected for query execution:
●      Only Posted Values for Navigation
The system displays posted values only.
●      Only Values in InfoProvider
The system displays only those values that are in the InfoProvider.
●      Values in Master Data Table
The system displays all characteristic values from the master data, independently of transaction data.
●      Characteristic Relationships
The system uses the current restrictions from the filter of the query and only displays the characteristic values that are valid according to the characteristic relationships.
Refer the link for more information
http://help.sap.com/saphelp_nw70/helpdata/EN/f1/0a5673e09411d2acb90000e829fbfe/frameset.htm
Regards,
Ravi Kanth

Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT

Hello SDN
While refreshing a query in a Workbook, I have received this error message and getting disconnecting form the BW server.
"Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT"
Does anyone has any idea? It is happening in Production and need to fix it as soon as possible.
Appreciate any help and points will be assigned for useful information.
Thanks
kumar

Hi Dinesh
It is stopping at the BREAK-POINT in Function LRRMSU13(RRMS_X_MESSAGE)
variable_screen=X&template_id=0QUERY_TEMPLATE
In the messages , For generation, it display:
&CAUSE&
The query contains selection elements with "Constant Selection". Such a
query cannot be run in the read mode 'Read Everything at Once'.
&SYSTEM_RESPONSE&
The read mode is automatically converted.
&SYS_ADMIN&
In the Variables, I see
&CAUSE&
Variable <(>&<)>V1& is used in the query in such a way, that an
optional entry is not possible.
For example, you might be using an "Exclude", or the variable might be
connected using OR to additional selections for <(>&<)>V2& in the
global filter, but is still displayed in the columns selections.
It is also not possible to use an optional parameter variable to fill
an interval selection in either the from-field or the to-field.
&SYSTEM_RESPONSE&
&WHAT_TO_DO&
If you are able to accept the mandatory entry, you need not do
anything. Otherwise you must work with several variables in the query.
You can use an optional interval variable to do this.
&SYS_ADMIN&
For Key Figs :
&CAUSE&
Quantities are multiplied with values for the key figure &V2& (&V1&).
This is not sensible.
A basic key figure was probably defined that contain a price. Only
addable amounts should be written on the database. Ratios and prices
are calculated as key figures. Therefore, the system maintains the
correct sequence, meaning summing takes place on every place and then
the quotient is formed.
If a 'price amount' is saved as a basic key figure after all then the
'non-aggregated indicator' can be undone using 'Change key figure'.
Therefore, the system carries out the multiplication (or division)
before the summing. The key figure is then assigned to the group 'Other
columns'.
&WHAT_TO_DO&
Please check the definition of the key figure &V2& (&V1&).
<DS:TRAN.KDNN>Check or change key figure &V1&</>
Can you please let me know how to fix this issue?
Thanks
Kuamr

Error Specify a value for variable-Abort System error in program SAPLRRK0 a

Dear Experts,
Could anyone help me to fix this issue?
I have an Customer exit variable in my query to calulate the first week of the prior year value as per the system calendar. when i execute the query, I am receiving the following error messaged and i am throwing out from the BW server.
The error message is
Error Specify a value for variable ZR00**
Abort System error in program SAPLRRK0 and form APPEND_KHANDLE_1-01-
Many thanks in advance.
Regards.
Krishna.

Hi Kishor,
try runnig the same query in RSRT, with execute and debug option.
Also check in query designer for its correctness.
Hope this helps...
Regards,
umesh

System error in program CL_RSMD_RS_0CALWEEK

As of this morning we are getting an error (see below) when we run reports on the portal. Apparently all reports that refer to 0CALWEEK one way or another are crashing.
The bizarre thing is that if I run the same reports in BEx analyzer, the reports don't crash ... the run just fine.
Anyone ever experienced something like this?
Any help or suggestions are appreciated.
Thank you
Marco
500 Internal Server Error
BEx Web Application
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator.
To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
Details: Full Exception Chain
Messages
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program CL_RSMD_RS_0CALWEEK and form VALUES_GENERATE-01 (see long text)

I submitted a ticket for this issue and I got directions to apply OSS note 1018814.
I don't know if this would solve your issue or not but based on our current situation here at my company, (version and SP level), the support person indicated that the OSS note he indicated was the best choice to fix it.

System error in program CL_RSMD_RS_SPECIAL

I have a query built on a Infoset, and the problem comes with 0FISCPER variable, when we try to do a input help (F4) in Bex. this happens only when I use fiscper on queries bulit on INFOSETS, and it works perfectly alright with all other cubes. We are on SP13. So do anyone know how to fix this issue, or a single OSS that can fix this issue.
System error in program CL_RSMD_RS_SPECIAL and form
IF_RSMD_RS~READ_META_DATA-02 (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program
state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template,
or during interaction in the planning modeler, and if you can reproduce
this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for
the trace tool environment as well as SAP Note 899572.
and in portal, it gets to the point of variable screen and then throws a error msg.
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION

I was a lil late on this time
However;i found a note below which exactly matches your infoset issue and 0fiscper,but i believe that SP-14 did the trick.
any ways good luck
Note 1058906 - GET_DIME_VALUES-02 in CL_RSMD_RS_SPECIAL
Hope it Helps
Chetan
@CP..

System error in program Constiuent Assembly - internal error

Hi,
This is regarding the query execution, we have three variables in the selection screen, We have one variable for hierarchy selection from Constiuent Assembly.
I am facing an issue while executing the query in BEX analyzer.Once i fill all the selection criteria in variable screen, I am getting an error saying that "System error in program Constiuent Assembly "
Can anyone please suggest what could be the reason for this error?
Please find below the error details.
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.

Hi,
May be the selection variable is not correct or corrupt.
Use any other slection variable for hierarchy object.
I hope it will help.
Thanks,
S

System error in program CL_RSD_MULTIPROV_CHECK========CP

Hi all,
I work with BI 7 release, SAPKW70019 patch. I see the following message when I activate a multiprovider:
System error in program CL_RSD_MULTIPROV_CHECK========CP and form CHECK-03- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
I cannot find a reason why this message arises. The only thing I notice is that one of the two infocubes that compose the multiprovider contains 20 key figures and one of them have the aggregation on '0CALDAY' reference characteristic (and 0CALDAY is not available). Both infocubes are activated without problem.
Any ideas?
Thanks a lot for the support!
Gianluca

Hi,
Termination CHECK-03- issued instead of a warning
Try this SAP Note Number: 1252207

System error in program SAPLRRI2 and form LRECH_SUMM_FUELLEN_6-01

Hi,
I am trying to execute a report and it gives me this error "system error in program SAPLRRI2 and form LRECH_SUMM_FUELLEN_6-01" I have done a bunch of cell editing stuff and when I go and see each cell looks good,I am not able to figure out where exactly this issue is. Can anyone help me with this. I tried to even switch on the Trace in RSRTRACE but it goes to the debugger and stuck in some SAP code. Don't know what exactly the problem is. Any help would be appreciated.
Thanks
Jay.

Hello Jay,
If valid for your system release and support package level please apply the SAP note 1129450.
Best Regards,
Des

System error in program SAPLRRI2 and form BEST_WGR_02-01-

Hi Friends,
When I am trying to execute a query i get the error message below.
System error in program SAPLRRI2 and form BEST_WGR_02-01- (see long text)
Error when generating dataProvider
The Same query can be executed after restarting BI server.( Hope No one recommends restarting BI server always).
I am using SAP BI Patch level 3.
Internet explorer 7
Gui 6.4
At the same time it is unable to disply variable screen in BEx Analyser with IE 7(Variable entry Screen appeares but No Input boxes are seen). Its Working fine with IE 6.
Any Solution For This.
Many Thanks,
Anand

Hi
IE 7 is not so compitable with BEx. It always has the Popups problem..
See the Note :919196 and Note 1159538 - Issues in Internet Explorer Note 950975 - SAP GUI for Windows: Support for IE7 (Internet Explorer 7)
Hope it helps

System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)

Hello all,
One of the users is trying to run a report in Production using BEx analyser and gets the following error.
BI Server error:
Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
I have already run the SAP Note 1237190 but there is no use as the error comes up again.
Could any one please help to resolve this issue.
Thanks
Phani.

Hi Dipika
Thanks for the reply.
But I dont think that note is applicable for this error as this error pops as soon as the selection screen is past and before the report is displayed.
This is not happening with all the users though.
Its a random problem only.
Thanks
Phani.

System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-10-

Hi Experts,
We found an error ABAP/P Processor: Message_type_x and Error analysis shows "System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-10-"
I found a forum that close to my issue: ABAP Dump Error - System error in program RSMDATASTATE
Also, I checked the SAP Note : 858671 and 1094948.
As for my BW system, the system component information is SAP Netweaver BI 7.0 Release 700 Level 0019. Does it mean the both sapnotes alreay apply to my sap system?
Could anyone please advices me in this issue? I am so newbie in SAP BW. I'm so apology if they already have a forum or a note that related to my issue.
Thank you everyone for further assistances
With Best Regards,
Molly

Hi Molly ,
A per my experience and and observation. Message_type_x issue will occur in two scenarios.
1) When ever Sytesm copy happend.
2) Triggering of info package twice at a same time.
Case1:
When ever system copy happens, we will have init request still pointing to the Previous targer syatem's in Init.
Thsi can be resolved by reinitilization of source request.
Note: Make sure that Init reqiuest is same in both Source and Target systems.
Case 2:
Message_type_x May occur by triggering the info package at a same time twice(some time we also get xx request is inprocess alert).
With respect to the following blog:
Kindly check the request in RSMDATASTATE.
1) Request SID for which all requests are technically o.k.
2) Request SID for which all requests checked for quality.
3) Request SID, up to which aggregates are to be rolled up.
Best Regards,
Maruthi

System error in program CL_RSR and form GET_CHANMID-02-

System error in program CL_RSR and form GET_CHANMID-02- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
I got this error in SCM IDES 7.0, Planning Area Initialization and Display MPOS...Please help me...

Hi,
One of our planning sequence is failing in production with similar error. Could you please let us know what is the fix for the issue you faced.
System error in program CL_RSR and form GET_CHANM-01
Please advice as this is very critical.
Thanks,
Tintu

Executing query error: System error in program SAPLRRI2 and form REP_A

Hello Experts,
I am facing problem while executing query.
I have activated a query from BI content. The query is activated successfully in development and running successfully in development, so I transported the same into QA.
When I execute this query into quality, automatically debuger opens. After I come out of debuger I get following error message:
" >> Row: 82 Inc: LRRMSU13 Prog: SAPLRRMS
System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text)
Error when generating dataProvider "
This query is using some standard structures, which are running successfully in other queries in QA.
what would be an issue?
Regards,
Nirav Shah

Hi,
Try to regenerate the query in RSRT t.code.
   ie) RSRT - give the query name - Generate report ( icon will be there near to Execute + debug) .
After generating the report, (logoff and login )try to execute the query again ..if the above solution doesn't work, check the below OSS notes which may help for you.
OSS notes : 1. 1121766
                   2. 1117966
                   3. 1225856
Regards,
Siva.

EP - BW myBudget issue - System error in program CL_RSR_WWW_RENDERER

Similar Messages

Maybe you are looking for