EP Load time is too High - and Browser crashes
Hi,
We have customized Enterprise Portal for our Company. All are going fine, but some users who are in same network as others are facing Long load time issue. It takes lot of time to load the home page and some time it even crashes.
Is there are other reason for such occurrences other than network error, like browser setting or any thing else. Please help me out in this.
Best Regards,
-Shabir Rahim.
Shabir,
You might want to look at these threads.
Performance tuning problem
How to guide for Fine tuning the performance of SAP EP
Good Luck!
Sandeep Tudumu
Similar Messages
-
SCOM2012 Alert: SQL 2008 DB Average Wait Time & Recompilationis too high
WE have SCOM 2012sp1 CU3 updated.
I receive the below critical alerts from SQL servers continuously, please help me to resolve this issue.
SQL 2008 DB Average Wait Time is too high
SQL DB 2008 SQL Recompilation is too highI don't know about anyone else but overriding those monitors and rules didn’t work for me, I had to override<o:p></o:p>
SQL Re-Compilation monitor for SQL 2012 DB Engine<o:p></o:p>
SQL Re-Compilation monitor for SQL 2008 DB Engine<o:p></o:p>
Average Wait Time monitor for SQL 2012 DB<o:p></o:p>
Average Wait Time monitor for SQL 2008 DB<o:p></o:p>
Now I am wondering if other monitors are valid as well in particular I have multiple alerts for<o:p></o:p>
Buffer Cache Hit Ratio monitor for SQL 2008 DB Engine is too low<o:p></o:p>
Page Life Expectancy (s) for 2008 DB Engine is too low<o:p></o:p>
is anyone else seeing these issues as well? -
I/O too high and it almost reach 100%
Experts:
I use berkeley DB to store some index information, the key values are string type and usually they are 20 chars.
Now the hit rate shows it is 98% and db_stat shows no more pages are pageout or pagein. While the I/O rate is too high. I only run the serach command.
2GB Total cache size
1 Number of caches
1 Maximum number of caches
2GB Pool individual cache size
0 Maximum memory-mapped file size
0 Maximum open file descriptors
0 Maximum sequential buffer writes
0 Sleep after writing maximum sequential buffers
0 Requested pages mapped into the process' address space
3245477 Requested pages found in the cache (98%)
57652 Requested pages not found in the cache
32 Pages created in the cache
57616 Pages read into the cache
48199 Pages written from the cache to the backing file
0 Clean pages forced from the cache
0 Dirty pages forced from the cache
0 Dirty pages written by trickle-sync thread
57665 Current total page count
56884 Current clean page count
781 Current dirty page count
262147 Number of hash buckets used for page location
3360554 Total number of times hash chains searched for a page
1 The longest hash chain searched for a page
3245235 Total number of hash chain entries checked for page
41241 The number of hash bucket locks that required waiting (0%)
40939 The maximum number of times any hash bucket lock was waited for (1%)
1872 The number of region locks that required waiting (3%)
0 The number of buffers frozen
0 The number of buffers thawed
0 The number of frozen buffers freed
57676 The number of page allocations
0 The number of hash buckets examined during allocations
0 The maximum number of hash buckets examined for an allocation
0 The number of pages examined during allocations
0 The max number of pages examined for an allocation
23 Threads waited on page I/O
Pool File: DG_11_23_1
4096 Page size
0 Requested pages mapped into the process' address space
2954110 Requested pages found in the cache (98%)
57629 Requested pages not found in the cache
0 Pages created in the cache
57611 Pages read into the cache
48072 Pages written from the cache to the backing file
Pool File: DG_20_24_1
8192 Page size
0 Requested pages mapped into the process' address space
291367 Requested pages found in the cache (99%)
23 Requested pages not found in the cache
32 Pages created in the cache
5 Pages read into the cache
127 Pages written from the cache to the backing file
2GB Total cache size
1 Number of caches
1 Maximum number of caches
2GB Pool individual cache size
0 Maximum memory-mapped file size
0 Maximum open file descriptors
0 Maximum sequential buffer writes
0 Sleep after writing maximum sequential buffers
0 Requested pages mapped into the process' address space
14M Requested pages found in the cache (99%)
58927 Requested pages not found in the cache
32 Pages created in the cache
58891 Pages read into the cache
48199 Pages written from the cache to the backing file
0 Clean pages forced from the cache
0 Dirty pages forced from the cache
0 Dirty pages written by trickle-sync thread
58940 Current total page count
54443 Current clean page count
4497 Current dirty page count
262147 Number of hash buckets used for page location
14M Total number of times hash chains searched for a page (14039718)
1 The longest hash chain searched for a page
13M Total number of hash chain entries checked for page (13921739)
251044 The number of hash bucket locks that required waiting (0%)
250230 The maximum number of times any hash bucket lock was waited for (2%)
1872 The number of region locks that required waiting (3%)
0 The number of buffers frozen
0 The number of buffers thawed
0 The number of frozen buffers freed
58951 The number of page allocations
0 The number of hash buckets examined during allocations
0 The maximum number of hash buckets examined for an allocation
0 The number of pages examined during allocations
0 The max number of pages examined for an allocation
23 Threads waited on page I/O
Pool File: DG_11_23_1
4096 Page size
0 Requested pages mapped into the process' address space
13M Requested pages found in the cache (99%)
58904 Requested pages not found in the cache
0 Pages created in the cache
58886 Pages read into the cache
48072 Pages written from the cache to the backing file
Pool File: DG_20_24_1
8192 Page size
0 Requested pages mapped into the process' address space
618586 Requested pages found in the cache (99%)
23 Requested pages not found in the cache
32 Pages created in the cache
5 Pages read into the cache
127 Pages written from the cache to the backing file
I can not understand why the I/O rate is so high, any expert can give some help?
thanksThis issue is discussed internally. If the user agrees, he can post the resolution on this topic.
Bogdan Coman -
Page load time differences between IE and Firefox
Hello all,
I have a problem with page loading time in IE 8. My page contains tabular form, classic report and some other items. I use some javascript code(placed in HTLM Header section) and also dynamic actions. When I try to display the page in IE I have to wait for 40 seconds (100 rows in tabular form). I realized that the performance is dependent on the number of displayed rows in the tabular form. But decrease the number of visible rows, using pagination, is not an option, because all needed rows should be visible for the users. During the tests I have tried to remove all the JS code and disable all the dynamic action, but the loading time was more or less the same.
When I try to run the same page in FireFox then it is displayed in 4 seconds!
I have already try to search some tips or advices how to speed up the page loading, but only what I have found out is, that every web browser is different. The javascript is handled differently, page rendering is done differently and so on.
Maybe there is something what I have missed, and you experts can help me. Is there anything general what I should check or change to speed up the loading time in IE?
Thanks in advance!
Jiri
APEX v. 4.2.1.00.08
IE 8.0.7600.16358
FF 19.0.2Thanks Denes for your reply.
I use HttpWatch tool to measure the loading times. Reports are mostly the same for IE and FF. I can see from the report, there is three times shown error 404 Not Found for the items below.
http://......./images/sRegion-Body.png
http://......./images/sRegion-Bottom.png
http://......./images/sReportBG-Standard.png
The last action which caused 404 error started 2 seconds after the page was asked to refresh. The next action http://......../i/libraries/jquery-ui/1.8.22/ui/i18n/oracle/jquery.ui.datepicker-cs.js started after 38 seconds (hanging in the same place for 36 seconds). Does it mean that the problem is caused by http://......./images/sReportBG-Standard.png action which returns 404 error?
How can I add the missing images?
-Jiri -
Db_files too high and High parse to execute ratio Error
Hi DBAs,
I was using TOAD to check the statistics on our database and got the above
error(db_files too high) against DBWR avg scan depth(3,057.4334) AND ALSO High parse to execute ratio against Parse to execute ratio 83,2903 How do I
deal with these problems ?
Thanks in advance.Database version ?
9.2.0.4.0
db_files is a parameter. Check what it is set to.
show parameter db_files
NAME TYPE VALUE
db_files integer 200
"High parse to execute ratio" may mean that your code does not use bind variables, so there is not much reuse. It can also be impacted by the setting of parameters cursor_sharing or shared_pool.
show parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACT
show parameter shared_pool
shows nothing!!!!!!
show parameter sga
NAME TYPE VALUE
lock_sga boolean FALSE
pre_page_sga boolean FALSE
sga_max_size big integer 1612782288
So what do you suggest?
Thanks -
"db file scattered read" too high and Query going for full table scan-Why ?
Hi,
I had a big table of around 200mb and had a index on it.
In my query I am using the where clause which has to use the
index. I am neither using any not null condition
nor using any function on the index fields.
Still my query is not using the index.
It is going for full table scan.
Also the statspack report is showing the
"db file scattered read" too high.
Can any body help and suggest me why this is happenning.
Also tell me the possible solution for it.
Thanks
Arun Tayal"db file scattered read" are physical reads/multi block reads. This wait occurs when the session reading data blocks from disk and writing into the memory.
Take the execution plan of the query and see what is wrong and why the index is not being used.
However, FTS are not always bad. By the way, what is your db_block_size and db_file_multiblock_read_count values?
If those values are set to high, Optimizer always favour FTS thinking that reading multiblock is always faster than single reads (index scans).
Dont see oracle not using index, just find out why oracle is not using index. Use the INDEX hint to force optimizer to use index. Take the execution with/witout index and compare the cardinality,cost and of course, logical reads.
Jaffar
Message was edited by:
The Human Fly -
I had gain too high and mike was too sensitive, now my audio is distorted!
Is there any hope for me? I was using an external directional mike, and I think I had the gain (or mike input volume) too high.
I was recording an outside rock concert, and the sound is muddy, distorted, and horrible. Can I use Soundtrack Pro to clean this up? Is there anything I can do or is the situation hopeless?
Thanks for any help.All of us who work with technology can tell stories of really bad mistakes we made
as we were learning our craft. Some of them are funny. Some are not. But we learn and move on.
There's nothing you can do about that distortion.
However, from now on, you will always remember to check your levels and monitor your audio. -
Windows loading time is too long!
After I installed Desktop manager ver4.6 to my PC . PC loading time is very long,
It takes 3 minutes to load desktop screen when turning on PC . (without Desktop Manager it takes one and 30 minutes)
Does Anyone have same issue ? OS: XP pro
After finish loading I do not feel slow.
please help me out .
Solved!
Go to Solution.Do you have the Desktop Manager set to load when the computer boots up? If so you can disable that by going into Add/Remove Programs, select the Desktop Manager and hit the Change/Remove button. Hit Modify, select the BlackBerry Desktop Manager and hit Next. You want to keep going through the wizard to pick the same options you did when installing it. When you're on the last screen before you hit 'Install' uncheck the box that says to start the Desktop Manager when the computer starts.
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution. -
Iphone 5 is stating that the phone is too hot and needs to cool down before it can be used. However the phone actually feels cold!! I can turn the phone off and restart it which temporarily resolves the issue. this issue stated once Apple replaced my battery. Any solutions or idease??
Take it back to Apple and have them look at it.
-
How many machines can I down load my product too?
If you purchased a download from Adobe, you can find the download link in your Adobe account. If you have a serial number, you can download a trial version from the Acrobat product page at http://www.adobe.com/products/acrobat.html. You can enter your serial number when you run the trial to convert it to a licensed copy. If you registered your serial number, it will be listed in your Adobe account. To access your account, click My Adobe at the top right of the Adobe.com site, just beneath the main navigation bar.
-
Load Time of Pages High For Some Reason
Hello,
I have a win 2003 server running cf7 on iis 6.0
Once and awhile some pages are taking between 10 and 11
seconds to load, so fusion reactor will send me an email if they
are over 10 seconds.
The pages pull 2 very small database queries and that is it,
the rest of the page is just text and graphics. When I get the
email I always go to the page and it takes 15 ms , a little more, a
little less at times.
If a person that has dialup accesses the page could this be a
reason why it is taking so long for the page to execute? I didn't
think the speed of the connection to the page actually effected the
execution times.
I am on a high speed connection and I have never been able to
go to the pages in question and have it take time to load
Any thoughts / Comments?
Thanks!
RandyYou may have other pages that are causing this problem. If
you have
some other pages that take a little longer to process and
sometimes
these pile up and use up all the available threads. Then
another page
comes along and has to wait eight or nine seconds for a
thread before
running. It is these pages that trigger the error, but they
are not
necessarily the ones causing the problem.
So you will have to look at your entire system to see where
the actual
problem may be.
RandyManCan wrote:
> Hello,
>
> I have a win 2003 server running cf7 on iis 6.0
>
> Once and awhile some pages are taking between 10 and 11
seconds to load, so
> fusion reactor will send me an email if they are over 10
seconds.
>
> The pages pull 2 very small database queries and that is
it, the rest of the
> page is just text and graphics. When I get the email I
always go to the page
> and it takes 15 ms , a little more, a little less at
times.
>
> If a person that has dialup accesses the page could this
be a reason why it is
> taking so long for the page to execute? I didn't think
the speed of the
> connection to the page actually effected the execution
times.
>
> I am on a high speed connection and I have never been
able to go to the pages
> in question and have it take time to load
>
> Any thoughts / Comments?
>
> Thanks!
>
> Randy
> -
Execution time is too high.
Hi,
I got several xsql-files that uses aprox. 1 minute to execute by them selves. I want to run one xsql that includes them all, but it times out, and I get an server-error. Is there any way I can get the execution time down, or change the timeout-setting?
I am running the xsql that comes with 8.1.7
Terje K.If Oracle8i JServer is included in the Oracle 8i package, then yes. The database itself is not large (aprox. 50Mb with data), but the results of the queries can get somewhat large. Here is an example:
1. first I made a view:
create view view_section2_issue as SELECT SPVSPC.OPN, OPE, PCA, PCS, PCSR, OSC, PWTT, OVSM, PLWD, PCSOD, PDC, TO_CHAR(ISOD,'dd.MM.YY') AS ISOD, TO_CHAR(PCSOD,'dd.MM.YY') AS OD, PSCN, PMDP1, PMDP2, PMDP3, PMDP4, PMDP5, PMDP6, PMDP7, PMDP8, PMDP9, PMDP10, PMDP11, PMDP12,PDT1, PDT2, PDT3, PDT4, PDT5, PDT6, PDT7, PDT8, PDT9, PDT10, PDT11, PDT12, PMDC, PMCA, PMMDP, PMDT, PMLWD, PMWTT, PMSCN, PMNS, PMWTH, PMSCH, PMOD
from SPVSISSU, SPVSISS2, SPVSPCS2, SPVSPC
where SPVSISSU.OPN = SPVSPC.OPN
and SPVSISSU.ISS is not null
and SPVSISS2.OPN = SPVSISSU.OPN
and SPVSISS2.ISSUE = SPVSISSU.ISR2
and SPVSPCS2.OPCS = SPVSISS2.IOPCS
and SPVSPCS2.PCSR = SPVSISS2.IPCS_REV
then I made the query (with some cursors):
SELECT OPE, PCA, PCS, PCSR, OSC, PWTT, OVSM, PLWD, PCSOD, PDC, OD, PSCN, PMDP1, PMDP2, PMDP3, PMDP4, PMDP5, PMDP6, PMDP7, PMDP8, PMDP9, PMDP10, PMDP11, PMDP12, PDT1, PDT2, PDT3, PDT4, PDT5, PDT6, PDT7, PDT8, PDT9, PDT10, PDT11, PDT12, PMDC, PMCA, PMMDP, PMDT, PMLWD, PMWTT, PMSCN, PMNS, PMWTH, PMSCH, PMOD,
CURSOR( SELECT PNS, POD, PWTH, PSCH
FROM spvspcs4
WHERE spvspcs4.opn = view_section2_issue.opn
and spvspcs4.pcs = view_section2_issue.pcs
and spvspcs4.pcsr = view_section2_issue.pcsr ) as wallThickness,
CURSOR( SELECT PELM, SST, PDSTD, PFS, PTS, PTY, PMN, MDS, ESK, PRM, PAGEBREAK, PMELL, page, start_remark(opn,pcs,pcsr,pel,pell) starten,
end_remark(opn,pcs,pcsr,pel,pell,start_remark(opn,pcs,pcsr,pel,pell)) as slutt
FROM spvspcs6
WHERE spvspcs6.opn = view_section2_issue.opn
and spvspcs6.pcs = view_section2_issue.pcs
and spvspcs6.pcsr = view_section2_issue.pcsr ) as elements,
CURSOR( SELECT PVELM, VDS, PVFS, PVTS, PVRM, PMVELL
FROM spvspcs7
WHERE spvspcs7.opn = view_section2_issue.opn
and spvspcs7.pcs = view_section2_issue.pcs
and spvspcs7.pcsr = view_section2_issue.pcsr ) as vType,
CURSOR( SELECT PBLP, PAGEBREAK, LTXT
FROM spvspcs5
WHERE spvspcs5.opn = view_section2_issue.opn
and spvspcs5.pcs = view_section2_issue.pcs
and spvspcs5.pcsr = view_section2_issue.pcsr ) as kommentar,
CURSOR( SELECT count(*) as tot
FROM spvspcs5
WHERE pagebreak = 'P'
and spvspcs5.opn = view_section2_issue.opn
and spvspcs5.pcs = view_section2_issue.pcs
and spvspcs5.pcsr = view_section2_issue.pcsr ) as kpages,
CURSOR( SELECT count(*) as tot
FROM spvspcs6
WHERE pagebreak = 'P'
and spvspcs6.opn = view_section2_issue.opn
and spvspcs6.pcs = view_section2_issue.pcs
and spvspcs6.pcsr = view_section2_issue.pcsr ) as tpages
from view_section2_issue
where OPN = {@opn} -
SLOW Music Store loading times (Safari too)
For the past few weeks (unsure if directly tied to a security or version upgrade), the ITunes music store has become painfully slow to load. The load bar starts, gets about 90% there quickly, then appears to 'hang', like it is having trouble loading the last couple images. All store pages have the same problem, including searches. Similar thing happening in Safari, though is more manageable since, unlike ITunes music store, the screen appears before it is fully loaded.
Other computers on my same home network, including both a mac and a PC, do not have this problem with ITunes. It is definitely just this one computer.
Have tried resetting Safari, playing with the buffer setting on ITunes, no luck.
Thoughts? Thank youHi Jim,
The 'refresh to force the page to load' symptom is usually a sign that you either have the wrong DNS addresses specified in your Network preferences or your ISPs DNS server are very slow.
Have a search for DNS on the Safari forum - there's quite a few posts and sample addresses for you to try out.
Good luck. -
Account Balance too high and won't let me make any...
All of a sudden couple weeks back I was seeing $4.26 million in my Skype account although I recharged my account with $5.00. And it is still showing up on my Skype account and it's still a mystery. However, the biggest challenge that I am having as of now is making calls from Skype which have come to a stand by since I cannot make any outgoing calls wherever it is chargeable. Not sure what happened but since I started seeing this huge credit balance on my account, my outgoing PAID calls seems to have been blocked. There is no customer service no that I could reach out to, but I need this to be resolved at the earliest. Also I didn't utilise all of my balance so not sure where did that balance vanish. I would really appreciate a quick response. Thanks, Sandi.
sandi.bagchi wrote:
However, the biggest challenge that I am having as of now is making calls from Skype which have come to a stand by since I cannot make any outgoing calls wherever it is chargeable. Not sure what happened but since I started seeing this huge credit balance on my account, my outgoing PAID calls seems to have been blocked. Also I didn't utilise all of my balance so not sure where did that balance vanish.
Hello and welcome to the Skype Community!
Your account shows that you have used up your last credit purchase made on 08/02/2014. To be able to make calls again you'll need some more credit. I'll check out the other aspects and advise.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
I've tried sudo nvram SystemAudioVolume=%80 for the sound, but it works just once... returns next startup's.
The first thing to do is use smartctl to test the drive. Start with the short test ( smartctl -t short /dev/sdX ), and if it passes run the long test ( ... -t long ... ).
Maybe you are looking for
-
How can I get the apps store on my iPad2 after updating to ios7
My App Store icon disappeared after updating to the latest iOS version. how do I get it back?
-
What is Stage3D's version of localToGlobal?
Hi all I have a funky little map plane, just a simple pair of rectangles as outlined in this [great, btw] article, containing a flat map jpg: http://www.adobe.com/devnet/flashplayer/articles/perspective-projection.html I need to plot the position of
-
Confused... why are my exports smaller than my versions???
I am having a heck of a time figuring this out. My file size (I've not done a thing to the photo since importing it) is 4.29MB. When I export the photo as a version it's 1.81MB. What's going on here?
-
Hi guys, I have the following situation: Table_A ID NUMBER NAME VARCHAR2(10) TABLE_B ID_B NAME_B VARCHAR2(10) By mistake I did the following query: Select * from table_a where id in (select ID from table_b); My question is: Why the query return all r
-
1.) I suggest that Lenovo offer 2 choices of keyboard with the W540: one with a numberpad, one without. On a 15-Inch Laptop, this is a hard call; some people will like each, given the aps they use. Personally, I like the feel of the newer Thinkpad ke