EP log type INFO not written to the portal.log file

All the log.info (where log is of type PortalRuntime Logger) statements in my code are not written  to the portal.log file.
I have configured the portal_logger to log ALL but it seems to log only the FATAL and WARNING messages and not the INFO ones.I am on EP6 SP2
Thanks
Sid

Let me rephrase my question.
In the portal logs configuration (Sys Adm - Monitoring - Logging Console - portal_logger ) if you select ALL, should it not log messages of all types ( ERROR WARNING INFO )? When I select ALL for the portal_logger the portal.log doesn't display the log messages of type INFO (only the once of type ERROR or WARNING).

Similar Messages

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • When i try to open itunes ,this written appears :"The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file. "What does it mean?

    when i try to open itunes ,this written appears :"The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file. "What does it mean?

    To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file.  Once the file was deleted I was able to open iTunes without difficulty.  Note that I am running Windows 8.  Hope this helps!

  • Item Conversion to GMD YIELD TYPE does not exist for  the item/items in this Recipe/Batch.

    Item Conversion to GMD YIELD TYPE does not exist for  the item/items in this Recipe/Batch. Cannot
    scale/create batch.
    While auto shipping the above error i am getting. Please somebody help on this.
    Thanks.

    Hi,
    Could you please let us know which Oracle Product was installed and it complete 5 digit version.
    Regards,
    Prakash.

  • Trip type does not exist in the system (T702G)

    Hi,
    In HR - Module - Travel Management.
    I am trying to create a travel request for an employee.
    i am getting the error message :
    Statutory trip type does not exist in the system (T702G)
    how to assign the trip type to a particular employee.
    regards
    sam

    If you are applying as employee you need to configure trip schema and single field control for webdynpro provided you are using webdynpro application as employee.
    there in the tri provision variant you need to enter the variant you have created.
    Under that select the travel planning trip schema PL.
    on right hand side you have a field trip schema: statutory where you need to select appropriate schema from drop-down.

  • Finder issues and Get Info refusing to show the number of files on items on the main hard drive.

    I am having finder issues. Mostly on the main hard drive. It takes ages to find things and I get the spinning wheel every time I open a folder.
    So I moved all of my files to a external drive.  When I had finished transfering I hit get info on the files on the external drive and on the same folder on the main drive.  To ensure that it has copied over all the files.  Because it was acting up and not copying all the files.
    Get Info refuses to show the number of files within the folders on the main hard drive. It hasppily tells me everything on any of the external drives.
    I have reset, the imac.  I have re indexed 3 times.  I have deleted the finder plist files.  I have reset finder using terminal commands. I have moved nearly everything off the main hard drive. But nothing is working.
    Can anyone offer any suggestions as to what could be causing my finder and get info issues.
    Any help wpuld be appreciated.
    Running Mountain Lion on a late 2009 Imac

    Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Back up all data.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
    sudo find ~ $TMPDIR.. -exec chflags nouchg,nouappnd,noschg,nosappnd {} + -exec chown $UID {} + -exec chmod +rw {} + -exec chmod -N {} + -type d -exec chmod +x {} + 2>&-
    This time you'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button
    Select
               ▹ Restart
    from the menu bar.

  • The Favorite iView does not appear in the Portal

    The Favorite iView does not appear in the Portal - instead I get the following runtime error:
    com.sap.portal.pcm.Title - An exception occurred while processing your request
    When I look it up in the log file - I get the following:
    Date : 06/092008
    Time : 7:58:50:500
    Message : 07:58_04/06/08_3852950
    EXCEPTION
    com.sapportals.portal.prt.component.PortalComponentException: Error in init method
    Component : com.sap.netweaver.coll.appl.ui.room.CollaborationDetailedNavigation
    at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:271)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
    at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
    at com.sapportals.portal.pb.PageBuilder.createIviewProfile(PageBuilder.java:443)
    at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391)
    at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:233)
    at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:635)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
    at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:815)
    at com.sapportals.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:703)
    at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
    at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
    at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.navigation.CollaborationNavTree of Portal Component com.sap.netweaver.coll.appl.ui.room.CollaborationDetailedNavigation because: Could not instantiate implementation class
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:269)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
    at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
    at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
    at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
    ... 35 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.netweaver.coll.appl.ui.room
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem._refresh(PortalApplicationItem.java:507)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.getCoreLoader(PortalApplicationItem.java:1360)
    at com.sapportals.portal.prt.core.broker.PortalComponentItem.getClassLoader(PortalComponentItem.java:569)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getClassLoader(PortalComponentItemFacade.java:102)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
    ... 39 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.km.application
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 44 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.km.cm.ui.flex
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 45 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.netweaver.bc.crt
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 46 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.portal.runtime.config.component
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 47 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception during start of application: SAPJ2EE::library:com.sap.tc.di.scm.transport_api
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:323)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 48 more
    Caused by: com.sapportals.portal.prt.core.broker.SAPJ2EELibraryNotFoundException: Could not find Library SAPJ2EE::library:com.sap.tc.di.scm.transport_api
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:277)
    ... 49 more
    Severity : Error
    Category :
    Location : com.sap.portal.prt.runtime
    Application : sap.com/irj
    Thread : ThreadPRT-Async 1,5,PRT-Async
    Datasource : 1212584461125:E:\usr\sap\DEP\JC00\j2ee\cluster\server0\log\defaultTrace.trc
    Message ID : 00145E336A6A0091000000010000098C00044ED6CA463F40
    Source Name : com.sap.portal.prt.runtime
    Argument Objs : com.sapportals.portal.prt.component.PortalComponentException: Error in init method
    Component : com.sap.netweaver.coll.appl.ui.room.CollaborationDetailedNavigation
    at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:271)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
    at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
    at com.sapportals.portal.pb.PageBuilder.createIviewProfile(PageBuilder.java:443)
    at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391)
    at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:233)
    at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:635)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
    at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:815)
    at com.sapportals.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:703)
    at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
    at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
    at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.navigation.CollaborationNavTree of Portal Component com.sap.netweaver.coll.appl.ui.room.CollaborationDetailedNavigation because: Could not instantiate implementation class
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:269)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
    at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
    at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
    at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
    ... 35 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.netweaver.coll.appl.ui.room
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem._refresh(PortalApplicationItem.java:507)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.getCoreLoader(PortalApplicationItem.java:1360)
    at com.sapportals.portal.prt.core.broker.PortalComponentItem.getClassLoader(PortalComponentItem.java:569)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getClassLoader(PortalComponentItemFacade.java:102)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
    ... 39 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.km.application
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 44 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.km.cm.ui.flex
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 45 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.netweaver.bc.crt
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 46 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.portal.runtime.config.component
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 47 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception during start of application: SAPJ2EE::library:com.sap.tc.di.scm.transport_api
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:323)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 48 more
    Caused by: com.sapportals.portal.prt.core.broker.SAPJ2EELibraryNotFoundException: Could not find Library SAPJ2EE::library:com.sap.tc.di.scm.transport_api
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:277)
    ... 49 more
    Arguments : com.sapportals.portal.prt.component.PortalComponentException: Error in init method
    Component : com.sap.netweaver.coll.appl.ui.room.CollaborationDetailedNavigation
    at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:271)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
    at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
    at com.sapportals.portal.pb.PageBuilder.createIviewProfile(PageBuilder.java:443)
    at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391)
    at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:233)
    at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:635)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
    at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:815)
    at com.sapportals.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:703)
    at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
    at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
    at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.navigation.CollaborationNavTree of Portal Component com.sap.netweaver.coll.appl.ui.room.CollaborationDetailedNavigation because: Could not instantiate implementation class
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:269)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
    at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
    at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
    at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
    ... 35 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.netweaver.coll.appl.ui.room
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem._refresh(PortalApplicationItem.java:507)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.getCoreLoader(PortalApplicationItem.java:1360)
    at com.sapportals.portal.prt.core.broker.PortalComponentItem.getClassLoader(PortalComponentItem.java:569)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getClassLoader(PortalComponentItemFacade.java:102)
    at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
    ... 39 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.km.application
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 44 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.km.cm.ui.flex
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 45 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.netweaver.bc.crt
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 46 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: http://PortalApplicationItem._prepare: com.sap.portal.runtime.config.component
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 47 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception during start of application: SAPJ2EE::library:com.sap.tc.di.scm.transport_api
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:323)
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
    ... 48 more
    Caused by: com.sapportals.portal.prt.core.broker.SAPJ2EELibraryNotFoundException: Could not find Library SAPJ2EE::library:com.sap.tc.di.scm.transport_api
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:277)
    ... 49 more
    Dsr Component : n/a
    Dsr Transaction : c1bb8390323511dd980100145e336a6a
    Dsr User :
    Indent : 0
    Level : 0
    Message Code :
    Message Type : 1
    Relatives :
    Resource Bundlename :
    Session : 52
    Source : com.sap.portal.prt.runtime
    ThreadObject : ThreadPRT-Async 1,5,PRT-Async
    Transaction :
    User : Administrator

    Amir ,
    Check this link , I t will help you
    http://help.sap.com/saphelp_nw04s/helpdata/en/1e/62eae2357c4596bda2476d0a6503e3/frameset.htm
    Set the property "Add to Favourites" to Yes
    Portal Content -> Content provided by SAP -> End user Content -> Standard Portal User -> Default Framework page ---> Edit Object
    Open the Page Title Bar -> Search for the property -> Show 'Add to Browser Favorites'
    and set this property to Yes.
    Now refresh the page. It will show this option.
    Koti Reddy

  • VERY URGENT, I CAN NOT ENTER IN THE PORTAL

    Hi,
    yesterday i changed the number of sessions in the visual administrator, Visual Administrator->services->Security Provider ->properties -> sessions_size,  from 200 to 1 and now we can not enter in the portal even from visual administrator.
    any idea please??

    Hi did you tried implementing the solution given in
    Unable to login to Visual Admin
    Also go to this path and check
    if No body can log into the portal until this account is disabled and a new super admin is created.                                             
    Information about portal setup and configuration can be found on
    help.sap.com --> Netweaver --> EP6 =< NW04                                             
    Specifically look into the Administration Guide --> User Admin section on how to create a super admin user and disable sap*.                                             
    I am trying my level best to help you, also please open an OSS message with SAP in the meantime.

  • REP-52005: The specified key userlogin does not exist in the key map file.

    Hi,
    I am using oracle 11g report server. I am getting the error of REP-52005: The specified key userlogin does not exist in the key map file.
    I updated the user_string in cgicmd.dat file. My cgicmd.dat file content is below
    ; OracleAS Reports Services                       ;
    ; CGICMD.DAT                                      ;
    ; Example CGICMD.DAT Mapping file                 ;
    ; Syntax: 
    ;      KEY : VALUE
    ; Where:
    ; KEY - the first argument of the rwservlet URL request (case sensitive).
    ; VALUE - command line parameters and/or special parameters.
    ; Keys can be referenced in the following ways:
    ;    1. Parameter on command line to the reports servlet
    ;          e.g. http://machine/servlet/rwservlet?KEY
    ;    2. Parameter on command line to a reports jsp
    ;          e.g. http://machine/mydir/myreport.jsp?KEY
    ;    3. Within a reports jsp - in the rw:report custom tag
    ;          e.g. <rw:report parameters="KEY">
    ; In addition to the Reports Server command line parameters, VALUE can include special parameters
    ; represented as "%X", where X identifies the parameter. Currently recognized special
    ; parameters:
    ;  %0 - %9 - 0..9 arguments from original rwservlet URL request. Note that %0 refers to the key itself.
    ;  %* - entire contents (all arguments) of original rwservlet URL request.
    ;  %D - request users to input database userid everytime they run the report.
    ;  %P - request for report parameter form in HTML format. It generates the PARAMFORM=HTML
    ;       construction on the first submission of the URL and PARAMFORM=NO upon parameter form submission.
    ; CGICMD.DAT Usage Notes
    ;   1. Multiple keys in this file MUST be separated by an EXTRA empty line.
    ;   2. Extra spaces are ignored. Multi-line entries allowed.
    ;   3. Lines starting with ";" character are treated as a comments.
    ;   4. Comments within a key or key value are NOT allowed.
    ;   5. NLS language support is provided and can be used (encoding should match the one
    ;      used in HTML request - no language conversion of any kind is attempted.
    ;   6. For %P special parameter, HTML format is by default mapped to the HTMLTABLE format in this release.
    ;      The HTML format in the future may be mapped to the HTMLCSS format.
    ;;;;;;;;;;;; Example Key Entries
    ;  Example 1:  Run a simple breakb report and output to HTML
    orqa: report=breakb.rdf destype=cache desformat=html server=repserver
    ; Example 2: prompt for userid the first time, then use database userid stored in the cookie subsequently.
    report_defaultid: report=breakb.rdf destype=cache desformat=html server=repserver
    ; Example 3: use %D to require user authentication every time
    report_secure: report=breakb.rdf destype=cache desformat=html server=repserver1 %D
    ; Example 4:  Take all arguments from URL and send it to the reports server
    run: %*
    ; Example 5:  Run breakb report with HTML parameter form.
    breakbparam : report=breakb.rdf destype=cache desformat=html server=repserver userid=scott/tiger@mydb %P
    ; Example 6: take all URL arguments, and also generate a HTML parameter form  
    runp: %* %P
    ; Example 7: Run an Express Report. Replace <MYHOST> with the name of the machine running the Express server. The
    ; builder on-line help explains the rest of the parameters (the /sl, st etc. etc.)
    express: report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott/tiger@mydb destype=cache server=repserver
    ;;;;;;;;;;;; Keys for Reports Demos
    ; Using default/in-process server.
    ; JSPs
    ;charthyperlink_ias: userid="scott/tiger@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=%DBHOSTNAME%)(PORT=%DBPORT%))(CONNECT_DATA=(SID=%DBSID%)))" %*
    ;charthyperlink_ids: userid=scott/tiger@ %*
    ;barcodeweb:         userid=oe
    ;parmformjsp:        userid=oe
    ;tutorial:           userid=oe
    ; Paper Reports
    ;xmldata:            userid=oe report=inventory_report.rdf destype=cache p_filelocation="http://%HOSTNAME%:%OC4JPORT%/reports/examples/xml_pds/scripts/" desformat=pdf
    ;barcodepaper:       userid=oe report=shippingmanifest.rdf destype=cache desformat=pdf
    ;distributionpaper:  userid=oe report=inventory_report_dist.rdf distribute=yes destination=exampledistribution.xml
    ;pdfenhancements:    userid=oe report=utf8test.rdf destype=cache desformat=pdf
    userlogin : userid=SYMFINBTOTEST@fin10r21 %*
    As in the above file i have added a key as userlogin at the end of the file. But the reports server does not take the key that i have given. I followed the same steps provided in oracle docs. I used "showmap" to check the cgicmd file that is used by the reports
    http://aspirevm8-17.aspiresys.com:9002/reports/rwservlet/showmap?server=bluQubeReportsAtLocalEnv&destype&userid=SYMFINBT…
    It shows me the content of the cgicmd.dat file and it also shows my updations. But in the "Parsed Map File Entries" it does not show my key value pair
    Parsed Map File Entries
    Return to Top
    Key Name
    Value
    runp
    %* %P
    breakbparam
    report=breakb.rdf destype=cache desformat=html server=repserver userid=scott@mydb %P
    report_defaultid
    report=breakb.rdf destype=cache desformat=html server=repserver
    run
    report_secure
    report=breakb.rdf destype=cache desformat=html server=repserver %D
    express
    report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott@mydb destype=cache server=repserver
    orqa
    report=breakb.rdf destype=cache desformat=html server=repserver
    Please help me to to make the key being populated here and being used by the reports server.
    Thanks,
    Priya

    uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
    then for development set
    reloadkeymap=yes (same file - rwservlet.properties).
    Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
    (For * production* may be you want to set reloadkeymap=no once all testing is done)
    see cgicmd.dat for many examples of using keymap file
    [ All Docs for all versions ]
    http://otn.oracle.com/documentation/reports.html
    [ Publishing reports to web - 10G ]
    http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
    http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
    [ Building reports - 10G ]
    http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
    http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
    [ Forms Reports Integration whitepaper 9i/10g ]
    9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
    10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
    http://www.oracle.com/technology/products/forms/techlisting10g.html
    ---------------------------------------------------------------------------------

  • I backed up my ipod during a windows backup.  how do i find those ipod files(not itunes) in the windows backup files? i've tried searching and i can't find

    i backed up my ipod during a windows backup.  how do i find those ipod files(not itunes) in the windows backup files? i've tried searching and i can't find

    so i plugged in my ipod and it asked if i wanted to backup the files before restoring it. 
    Do you mean iTunes asked if you wanted to backup files before restoring? If so the it is in the location I posted. You don't need to navigate to the backup. Once your restore your iPod it will ask if you want to restore from a backup and present you with the backups made before hand.
    To restore information from a backup, use one of the following methods after connecting your iOS device to the computer with which you normally sync:
    -Click the File menu and select Devices > Restore from Back up.
    Or
    -Open the iOS device's Summary tab. There are two ways to access this:
    -Click the device button in the upper right corner. (If viewing the iTunes Store, click the Library button in the upper right corner. The device button will then be visible.)
    -From any view in iTunes, click the View menu and select Show Sidebar. Select your iOS device in iTunes under Devices.
    -Click the Restore Backup button.

  • HT2513 In my iCal, "new reminder" does not appear in the menu under "File". How can I get reminders to show up on my iCal

    In my iCal, "new reminder" does not appear in the menu under "File". How can I get reminders to show up on my iCal?

    If you're running Mountain Lion (10.8.3), reminders is now a separate app.  Launch reminders from your applications group and you will be able to access File>New Reminder.

  • I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

    Dear Ones,
    I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

    see if this is helpful : [http://support.mozilla.org/en-US/kb/Opening%20PDF%20files%20within%20Firefox Opening PDF files within Firefox]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • REP-52005: The specified key rep_drill does not exist in the key map file.

    Hi
    I am using Forms and reports version 11.1.1.4.0
    Weblogic 10.3
    I wanted to create a drilldown report
    I have modified the cgicmd.dat file in the below location
    C:\ORACLE\Middleware\user_projects\domains\CL2DOMAIN\config\fmwconfig\servers\WLS_REPORTS\applications\reports_11.1.1.2.0\configuration\cgicmd.dat
    by adding the below line to the end
    rep_drill: userid=JOE/JOE123@JOEDB server=rep_wls_reports_dsv-002_2inst desformat=pdf destype=cache paramform=no %*
    restarted the reports server
    In CUSTOMERS.RDF I have placed a link on the customer field using the below code
    SRW.SET_HYPERLINK_ATTRS('TARGET="_new"');
    SRW.SET_HYPERLINK('http://192.168.1.1:9002/reports/rwservlet?rep_drill+report='||'CUSTOMERS.rep+P_CUCODE='||CHR(39)||:CS_CUSTOMER||CHR(39));
    There are so many parameters passing to the report JOBS.RDF
    When I run the report and click on the link it gives me an error
    "REP-52005: The specified key rep_drill does not exist in the key map file."
    When I replace the rep_drill in the link with
    userid=JOE/JOE123@JOEDB+server=rep_wls_reports_dsv-002_2inst+desformat=pdf+destype=cache+paramform=no
    the report work perfect
    Can somebody help me please

    I said
    REPORTS_URL value:
    http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=
    It looks like you did the following:
    REPORTS_URL value:
    http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=test.rdf
    Try removing the test.rdf.
    Anton
    p.s. If you want some detailed help with integrating Apex and Reports, you can contact me offline here: http://concept2completion.net/c2/f?p=9876:20

  • 11gR2- REP-52005: The specified key userlogin does not exist in the key map file.

    hi,
    i am getting this error "REP-52005: The specified key userlogin does not exist in the key map file." when running report using url
    http://myserver.com/reports/rwservlet?userlogin&report_server&report=myreport.jsp....
    i have added the key mapping entry in cgicmd.dat file with the name userlogin
    as
    userlogin: userid=scott/tiger@devdb %*
    report_server: server=cluster_reports %*
    but still this error,

    uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
    then for development set
    reloadkeymap=yes (same file - rwservlet.properties).
    Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
    (For * production* may be you want to set reloadkeymap=no once all testing is done)
    see cgicmd.dat for many examples of using keymap file
    [ All Docs for all versions ]
    http://otn.oracle.com/documentation/reports.html
    [ Publishing reports to web - 10G ]
    http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
    http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
    [ Building reports - 10G ]
    http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
    http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
    [ Forms Reports Integration whitepaper 9i/10g ]
    9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
    10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
    http://www.oracle.com/technology/products/forms/techlisting10g.html
    ---------------------------------------------------------------------------------

  • REP-52005: The specified key replabel does not exist in the key map file.

    Hi,
    I am using oracle 11g report server. I am getting the error of REP-52005: The specified key replabel does not exist in the key map file.
    I updated the user_string in cgicmd.dat file but of no use. Plese kindly help me on the same.

    uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
    then for development set
    reloadkeymap=yes (same file - rwservlet.properties).
    Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
    (For * production* may be you want to set reloadkeymap=no once all testing is done)
    see cgicmd.dat for many examples of using keymap file
    [ All Docs for all versions ]
    http://otn.oracle.com/documentation/reports.html
    [ Publishing reports to web - 10G ]
    http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
    http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
    [ Building reports - 10G ]
    http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
    http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
    [ Forms Reports Integration whitepaper 9i/10g ]
    9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
    10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
    http://www.oracle.com/technology/products/forms/techlisting10g.html
    ---------------------------------------------------------------------------------

Maybe you are looking for