EP not see MDM server

Hi Gurus
When I create a new MDM system in a Portal Content -> MDM Connection Wizard on step 4 (Select Repository) I cannot select any MDM repository because the drop-down empty. So I cannot finish the wizard and create a new MDM system reference in EP.
My EP (NW 7.00 SP13) and MDM Server (5.5 SP6) are running on the same host. In MDM Console I can connect to my MDM server and see the MDM repository mounted to it.
What is the problem with the MDM Connection Wizard? Maybe I specified the wrong properties on steps 1-3?
Please, help!
Thanks and Regards,
Sergei

>1. Verify that you have deployed the correct SCA files i.e. of compatible version with that of MDM Server
>2. Only running repositories would be visible in the drop down
>3. Try passing Server IP instead of Server Name
1. How can I check this? I deployed the following SCAs: BP_MDM_TECHNOLOGY (5.50.6.0), MDM_JAVA_API (5.50.6.0) & MDM_WEB_UI. My MDM server seems a little bit newer: it's version is 5.5.64.92. Can it cause the problem?
2. Yes, MDM server is running and the remote repository is loaded too.
3. I've tried this. No any changes in behavior.
In general when I come to the step Select Repository I do not see any delays. It seems the EP's wizard does not even try to connect to MDM server host which I specified on step 3. If, for example, I specify any unreachable wrong MDM Server host and go to step Select Repository it'll appear immediately without any connection attempts to the wrong host.
Maybe something need to be configured additionally? What I did was I installed MDM Server + Console, started the MDM server, created and mounted MDM repository located on the remote MS SQL Server, then I deployed the SCAs mentioned before and restarted my J2EE server.
Thanks and Regards,
Sergei

Similar Messages

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

VPN Connected but can not see folders / server

I have established a connection between an OSX server and client but now can not see the server or any services on the client. There are no servers listed in the 'Network' section of finder and using 'Connect to server' I can not see it either. The log on the server shows the connection and the client does as well but other than that I can not do anything with the connection.
Details
- Using 10.6 osx server and a 10.6 client.
- Connected via VPN, L2TP
Thanks,
Brian

I have connected to VPN but can't see anything on my finder or desktop.
I tried connecting to server by doing command+K and entered the ip address like afp://ipaddress/user
doesn't work. I get error message saying:
Connection Failed
The server "165.124.164.125" is available on your computer. Access the volumes and files locally.
help!!

Macbook w/10.6.8 not seeing print server

So here's the problem with 2 of my macbooks with 10.6.8 on it. We recently set up a new print server and is working for all of our other laptop of same the vintage except for 2 of them. I've redone there network settings-that's fine. I've rebound them to our network-that's fine too. I've reset the print system-that's worked perfectly with all of the other laptops except these 2. I've cleared the MCX cache. Deleted CIJScannerRegister.plist. I've even reset the pram and smc just to be complete about it but still none of the printers for that building show up (that do show up for all the other laptop of same model and also 10.6.8)
What am i missing?
Also, i've verified that the 2 laptops are indeed in the correct print group in WGM.

Hello CMattos,
Thank you for the details of the issue you are experiencing with printing from 2 of your MacBooks. You have taken some really good troubleshooting steps already. I found an article with a few additional steps you can take. I recommend following the steps below (you can skip the steps you have already taken):
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Additional Information
Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB. For more details, see this article.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Thank you for using Apple Support Communities.
Best,
Sheila M.

Clients Not seeing DHCP server at branch office or not accepting ip offers (NO LOG REPORTS KIND OF IN THE DARK)

Hi there i am having an issue that has popped up recently i have a DC at a branch office that is connected to the main office DC via a Persistent Demand Dial connection in RRAS. Everything was working properly according to me until i found out that the Network
Admin who manages the branch office network failed to notify me that client machines weren't getting IP addresses from the DHCP server. This server was recently installed and wasn't fully implemented till about a week ago when i configured the Demand Dial
connection in RRAS up until that point it just had a regular old VPN connection to the main office while we worked out the kinks with a few things. the things ive tried so far to get DHCP working are as followed
1.Rebooted the branch office server (MULTIPLE TIMES)
2. Uninstalled the DHCP Role and re-installed it....To my surprise 1 client managed to get a ip on its lan adapter after DHCP was re-installed but nothing else
3. Disconnected the connection between the main office DC and the Branch office DC as i figured the main office DC DHCP server might be interfering with the branch office DC DHCP Server but nothing happened
4. Unauthorized and Reauthorized the main office DHCP server and the branch office DHCP server nothing changed
5. sifted through multiple log files on both servers and found noting in fact DHCP logs are empty on both servers
6. restored backups of the DHCP servers from when they were working
7. came here cause im out of ideas and im pulling my hair out
here are the current statistics from the problem server
Start Time: 7/12/2014 2:02:10PM
Up Time: 1Hours, 18 Minutes, 41 Seconds
Discovers: 90
Offers: 90
Requests: 2
Acks: 13
Nacks: 0
Declines: 0
Releases: 0
Total Scopes: 1
Total Addresses 253
In Use 2 (0%)
Available: 251 (99%)
Id like to add that RRAS was getting IP addresses from the problem server up until the point i uninstalled the role and re-installed it
heres is a ipconfig /all from the problem server
Windows IP Configuration
Host Name . . . . . . . . . . . . : MNB-DC
Primary Dns Suffix . . . . . . . : VTEACR.LOCAL
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : VTEACR.LOCAL
PPP adapter Remote Router:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Remote Router
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.141.70.25(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 10.141.70.10
NetBIOS over Tcpip. . . . . . . . : Disabled
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
Physical Address. . . . . . . . . : 00-16-35-AB-D3-05
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d9e:daa4:34dd:db44%10(Preferred)
IPv4 Address. . . . . . . . . . . : 10.141.80.102(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : fe80::226:5aff:feb7:5b3c%10
10.141.80.1
DNS Servers . . . . . . . . . . . : ::1
10.141.80.102
NetBIOS over Tcpip. . . . . . . . : Enabled
PPP adapter RAS (Dial In) Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : RAS (Dial In) Interface
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 169.254.238.243(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter Local Area Connection* 8:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.{427DF66B-3B30-40B1-B67E-B5587465C
394}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.ziricom.com
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 12:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.VTEACR.LOCAL
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 13:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.{BE201060-A9B9-404A-8361-F8FFB82F5
6F6}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 14:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #5
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 15:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.VTEACR.LOCAL
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 16:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #7
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 19:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.ziricom.com
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
if anymore information is needed please let me know i have full access to everything on the network so its not a problem and i am able to remotely access the branch office DC and all computer and switches at any time of the day
Viper Technologies Computer Repair Putting The Venomus Bite Back In Your Computer We Are Located In Antigonish ,NS Canada Check Us Out HTTP://WWW.VIPERTECHNOLOGIES.TK

Hi,
Does this issue occur on one client or multiple?
Please check this article:
http://technet.microsoft.com/en-us/library/cc757164(v=ws.10).aspx#BKMK_5
Regards.
Vivian Wang

Windows 8.1 Not Seeing Ubuntu Server

I have been running a file server with Ubuntu Server 14.04.1 as the OS and Samba 4.1.6 to share the files. I was able to connect to the server and access all of its drives from both my desktop and laptop running Windows 7. I
upgraded my laptop to Windows 8.1 Pro and am now unable to connect to the server or its drives. The server does not show up at all during network discovery.
I am still able to connect to the server and drives from my desktop that is still running Windows 7. I tried connecting via a direct path from my laptop and got error 0x80004005 and Windows cannot access \\Server message. I have verified
that the laptop is on the same workgroup as the server and file sharing is turned on and works for connection to my desktop. Is there a new setting in Windows 8.1 that would block my Ubuntu server?

Hi Kylep,
First, you should check whether the "TCP/IP NetBIOS Helper" in services panel is turned on, the TCP/IP NetBIOS Helper service provides support for the NetBIOS over TCP/IP (NetBT) service and NetBIOS name resolution for clients on your network,
enabling users to share files, print, and log on to the network.
Besides, you can try to reset TCP/IP if you are still faced with the same issue:
To reset TCP/IP
http://support.microsoft.com/kb/299357
Regards
Wade Liu
TechNet Community Support

Network does not see static IP server

what am I missing here? on the router I have assigned static IP for the win2012 server and the rest of the wkst connect to the router via dhcp. now the wksts can not see the server but can see the rest of the network. I can ping the servers IP address
but can not ping the server host name. I put the dns addresses of the server on the wksts but still the wksts can see the server.
thanks for the help---
wkst info:
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::616c:59f4:f797:
IPv4 Address. . . . . . . . . . . : 192.168.1.196(Preferr
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Thursday, September 1
Lease Expires . . . . . . . . . . : Sunday, September 14,
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
TM

Refer :
http://msdn.microsoft.com/en-us/library/windows/desktop/aa384240(v=vs.85).aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.
I decided to add a router with new settting. everything is working now. thanks---
TM

MY IOS does not support EKU Server-Auth/Client-Auth

Hello,
I have a cisco router with Software (C3725-ADVENTERPRISEK9-M), Version 12.4(15)T8.   im trying to set it up as my CA Server where I need to enroll my AnyConnect clients.
But while I trying to configure my crypto pki server command, I do not see   EKU Server-Auth or EKU Client-Auth   feature
can any one tell why it does not have this feature ??

it was added into 12.2T.    but for me it does not have this feature available . any ideas ?

MDM Server doesn't start after upgrade to SP 5

hi,
i'm not used to sap services on windows hosts.
After the Update from 7.1.04 to 7.1.05 the mdm server doesn't start. I found only a few logs (unter c:/usr/sap/SID/MDS00/work). Most of them from sapcpe (without errors or warnings). Only the sapstart.log contains a bit information:
SAP-R/3-Startup Program
Starting at 2010/08/16 21:29:18
Startup Profile: "C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest"
Starting Programs
(1684) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/mds.lst
(976) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/shared.lst
(3632) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/sapinstance.lst
(2172) Execute: C:\usr\sap\MDM\MDS00\exe\mdmcpc.bat C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest.INI C:\usr\sap\MDM\MDS00\config\mds.ini
(3652) CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3652 died unexpectedly, restarting process
(3612) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3612 died unexpectedly, restarting process
(2364) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 2364 died unexpectedly, restarting process
(3576) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3576 died unexpectedly, restarting process
(3588) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3588 died unexpectedly, final process restart.
Process will not be restated in the future because of frequent failure.
(1396) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
This isn't really much I can work with. In the sapmmc I found the Option Developer Trace. I try to 'switch it on', but there is no difference.
With 7.1.04 the server was running well.
I happy for any suggestions

Hi,
Please check out Note 1482822 - MDM Server not starting after MDM 7.1 SP05 was installed.
hope it helps you.
Best regards,
sudhanshu

Windows 8.1 MDM not responding to more than one SyncML from MDM server per session

Here is the behaviour i see, which was not expected by Windows 8.1.
1) Device is enrolled
2) Client initiates the connection with the MDM server defined in provisioning XML during enrollment.
3) MDM Server sends some commands as a SyncML response.
4) Client accepts the commands and sends Status and results.
5) Again MDM Server sends some commands as a SyncML response.
6) Client doesn't respond to these commands or not sending any SyncML. Here is the problem that i am referring to.
We are capturing the traffic in fiddler and found that device is not sending the next request where we are expecting the status for these commands.
The same is being repeated in all the requests client initiates. DM Client responds back only for one syncML sent by the MDM server per session.
Is this the expected behaviour with Windows 8.1? Or are we doing something wrong to see this behaviour?
Below is the SyncML for which I am expecting the response from the DM client. (Note: I got the response for the same SyncML in the first connection, but not in the second.)
<SyncML xml:lang="en" xmlns="syncml:SYNCML1.2">
<SyncHdr>
<VerDTD>1.2</VerDTD>
<VerProto>DM/1.2</VerProto>
<SessionID>1</SessionID>
<MsgID>1</MsgID>
<Target>
<LocURI>0</LocURI>
</Target>
<Source>
<LocURI>https://####</LocURI>
<LocName>AfariaWinPhoneProvider</LocName>
</Source>
<RespURI>https://####</RespURI>
</SyncHdr>
<SyncBody>
<Status>
<CmdID>1</CmdID>
<MsgRef>2</MsgRef>
<CmdRef>0</CmdRef>
<Cmd>SyncHdr</Cmd>
<TargetRef>https://####</TargetRef>
<SourceRef>0</SourceRef>
<Data>200</Data>
</Status>
<Get>
<CmdID>2</CmdID>
<Item>
<Target>
<LocURI>./cimv2/Win32_ComputerSystemProduct</LocURI>
</Target>
</Item>
</Get>
<Final />
</SyncBody>
</SyncML>

Hello Sreekanth,
I am facing similar issue, here is the behaviour description:
1) Device is enrolled
2) Client initiates the connection with the MDM server defined in provisioning XML during enrollment.
3) MDM Server sends some commands as a SyncML response.
4) Client doesn't respond to these commands or not sending any SyncML.
The same is being repeated in all client request.
Below is the SyncML
for which I am expecting the response from the DM client:
<SyncML xmlns="SYNCML:SYNCML1.2">
<SyncHdr>
<VerDTD>1.2</VerDTD>
<VerProto>DM/1.2</VerProto>
<SessionID>1</SessionID>
<MsgID>1</MsgID>
<Target>
<LocURI>9302116</LocURI>
</Target>
<Source>
<LocURI>https://#####</LocURI>
</Source>
</SyncHdr>
<SyncBody>
<Status>
<CmdID>1</CmdID>
<MsgRef>1</MsgRef>
<CmdRef>0</CmdRef>
<Cmd>SyncHdr</Cmd>
<TargetRef>9302116</TargetRef>
<Data>212</Data>
</Status>
<Status>
<CmdID>2</CmdID>
<MsgRef>1</MsgRef>
<CmdRef>2</CmdRef>
<Cmd>Alert</Cmd>
<Data>200</Data>
</Status>
<Status>
<CmdID>3</CmdID>
<MsgRef>1</MsgRef>
<CmdRef>3</CmdRef>
<Cmd>Replace</Cmd>
<TargetRef>./devinf12</TargetRef>
<Data>200</Data>
</Status>
<Get>
<CmdID>75</CmdID>
<Item>
<Target>
<LocURI>./DevDetail/SwV</LocURI>
</Target>
</Item>
</Get>
</SyncBody>
</SyncML>
Here
we had tried sending
<Target>
<LocURI>0</LocURI>
</Target>
But it didn't worked.

MDM console GUI on Windows is not mounting the MDM server on Solaris

Hello MDM experts,
This is kind of administrative problem. I am basis person, installing SAP MDM 5.5 SP04 for the first time.
I have configured the MDM server (mds) on solaris 10 system. I have also configured MDM import server(mdis) and Syndication serever (mdss) on the same machine. I have installed the database software and configured the empty repository on the same host machine.
So, Database and all the 3 MDM services (mds,mdis,mdss) are running on Solaris machine.
After that, I installed "MDM console fat client GUI" component on my desktop and trying to "mount the server" by specifying the "hostname" of the solaris machine where MDM services are running.
But I am not able to mount it...it says invalid server and does not mount.
Any idea what might be the problem ????
I referred following link :
http://help.sap.com/saphelp_mdmgds55/helpdata/EN/8e/9f9c427055c66ae10000000a155106/frameset.htm
which says, you should have administrative right on Solaris machine where MDM server is running....but how do I have that being a Windows user ???
Please advise.

Hello Mark,
1. When I right click on the "SAP MDM servers" node in "Console Hierarchy" pane on the left hand side of the Console GUI, and select "Mount MDM Server..." option in context menu, I get a dialog box for entering my MDM server name.
I typed in the fully qualified host name of my solaris server where "mds-r" is running.
When I click "OK" button, it adds an entry in "Console Hierarchy" on left hand side, but the entry comes with "Yellow exclamation Mark" sign. Also it says Status "Invalid" when I see the "MDM servers" section on right hand side top.
When I right click on my newly created entry of MDM server, all the options on context menu like "Mount Repository, Create Repository, Connect to MDM server" look greyed out. Only the option of "Unmount MDM server" seems to be enabled
2. I tried to do the same thing on 2 different Windows machines and got the same output.
Regards,
Bharat

SQL server 2012 does not see local disks other than C being started under domain account (which is local admin on the server)

Hi all. We have a SQL Server 2012 installed to a fresh Windows Server 2012 Server. There is a service account domain\rusystem01 created to run SQL services. It is added as a Local administrator on this server.
The issue is that SQL Server does not see any local drives (other than C drive) on the server if we run it from this domain service account (for example, we cannot move any databases to any other drives or setup backup).
It works fine (and other drives ARE available) if SQL Services are started from Network service account or Local service account (which is not recommended by Microsoft). But does not work from domain account.
Any ideas how to fix this?
MCP

>Any ideas how to fix this?
Apply NTFS ACLs for the folders (and perhaps volumes*) for SQL Server. Use the Per-Service SID, rather than the Service Account for the ACLs so they survive changing the service account.
The per-service SID is "NT Service\MSSQLSERVER" for a default instance and "NT Service\MSSQL$InstanceName" for a named instance.
*Volume ACLs are set in Disk Management.
David
David http://blogs.msdn.com/b/dbrowne/
David, would you please clarify what do you propose? I open D: volume on the Disk management and grant NT Service\MSSQL$DEV account with Full control permissions. Restarted SQL - no effect. Still only C: is visible for SQL.
MCP

MDM Repository not Connecting after Server shifting

Hi,
Here We have SAP MDM 7.1 06 on Windows Server 2008 R2 with Oracle.
Recently we have shifted our MDM Server from 1 Data Center to Another Data Center, After this change MDM Instances started successfully.
1st Problem:
Now the problem is, i am not able to connect repository (Error is: Repository connect failed, Invalid Object State). After i mount the MDM Server in console, repository not connecting.
2nd Problem:
when i right click on MDM Server in Console, even i am not able to connect Databse in DBMS Setting (Error is: Unable to connect with Database server).
Need Help to fix this issue at the earliest.
Did some searches on net and sdn forums but couldn't get right solutions.
Thanks in Advance
Thanks
Ahmed

Dear All,
Thanks For your support.
The issue has been solved.
Problem was: MDM Server and Repository was not connecting to DB, due to sever shifting to new location with different public IP.
Solution is: when i check the tnsnames.ora file in the below location Old public IP was given so, now i just changed the newly assigned public IP, (Under file path: <Drive>:\oracle\SID\product\11.2.0\dbhome_1\NETWORK\ADMIN).
After the change and update of new public IP in tnsnames.ora, we have restart the MDM instances and DB from OS Level.
After this activity, DB connection issue was solved, then now i am able to connect to existing MDM repository.
Thanks
Ahmed

Mdm:iOS terminal does not communicate to a MDM server

How do you do?
It is Matsuzaki SHinji.
I want you to teach about Apple MDM.
I am MDM Vendor.
The MDM server is using Apache 2.2.3.
WavDAV is used.
The PUT method is supported.
The contract of an enterprise is completed.
The application of MDM is also completed.
I am using the following URL by webdav.
It has also checked that it was in the state which can be used.
https://www.anetm.com/dav/
It is a thing of APNs.
nj_dev_apns-dev.pem
The "user ID" of subject contained in a nj_dev_apns-dev-key-noenc.pem certificate is "jp.co.nishitele."
APNs is used using the following ruby script.
In the following codes, a device token is ending exchangeably.
"[ -device torkn string 32 length set- ]"
Start Script
#!/usr/bin/ruby -Ku
require 'openssl'
require 'socket'
    (msg = []) << "[ -device torkn string 32 length set- ]"
    device = msg.pack("H*")
    socket = TCPSocket.new('gateway.sandbox.push.apple.com',2195)
    context = OpenSSL::SSL::SSLContext.new('SSLv3')
    context.cert = OpenSSL::X509::Certificate.new(File.read('nj_dev_apns-dev.pem'))
    context.key = OpenSSL::PKey::RSA.new(File.read('nj_dev_apns-dev-key-noenc.pem'))
    ssl = OpenSSL::SSL::SSLSocket.new(socket, context)
    ssl.connect
    payload = <<-EOS
"mdm":{"<PushMagic>"
EOS
    (message = []) << ['0'].pack('H') << [32].pack('n') << device << [payload.size].pack('n') << payload
    ssl.write(message.join(''))
    ssl.close
    socket.close
End Script
It performs.
The next warning has occurred at the iPhone terminal.
Apr 30 11:04:35 Evangerion-iPhone4S apsd[60] <Warning>: <APSCourier: 0x131e80>: Failed to parse JSON message payload for topic 'jp.co.nishitele': The operation couldn’t be completed. (Cocoa error 3840.)
An iOS terminal does not communicate to a MDM server.
I would like to solve this.
And thank you.
Thank you for your consideration.
He is waiting for the reply.

Is this iPad used?
iTunes should be version 11
It should be reset to wipe all content from the device and set up as a new device with iTunes.    It should update to IOS 7.0.4

Is it possible to install a consumer app for mass usage that would alter the ios device proxy settings? Over the air not supervised. Can an app company use an MDM server to do this if the customer consents?

Is it possible to install a consumer app for mass usage that would alter the ios device proxy settings? Over the air not supervised. Can an app company use an MDM server to do this if the customer consents?

HI Chris,
Thanks for taking the time to reply.
Could you expand on your answer, which bit is very doubtful?
Also in your knowledge would Apple work with a company and license it if the software they were developing was desired by consumer demand?
Thanks
Gary

EP not see MDM server

Similar Messages

Maybe you are looking for