EP operation from Vista

Hello,
I have a problem with SAP EP content administration from MS Windows Vista (and the newest version of MSIE7.0)
It is mouse clicks malfunkction and I have no proper right click option choice (New, Open, ..) so for instance I cannot add iView to a role and even log off from portal.
When MS Windows XP with MSIE7.0 is used it is OK.
Does somebody know when Vista incompatibility with SAP EP will be resolved ?
Regards
Krzysztof Ziemba

Apply this note it will solve your problem,
Note 991449 - Web Dynpro and Microsoft Internet Explorer Version 7.0
applies to vista also, i am using vista and now running nicely my ep7 on IE7.
Cheers!!
SJ.

Similar Messages

  • HT203175 My Ipod does not sinc with all of my Itunes library, only the first few albums. I recently changed my operating system to XP from Vista, which was a pain, and due to my fault had to reinstate most of my albums and all of the playlists.

    Ipod does not sinc with all of my Itunes library, only the first few albums. I recently changed my operating system to XP from Vista, which was a pain, and due to my fault had to reinstate most of my albums and all of the playlists. How do I get my Ipod to sinc fully when I access Itunes?

    Recover media from iPod
    See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
    tt2

  • I recently upgraded to Windows 7 from Vista but my iTunes will no longer work.  It says file can not be located when I try to play a song.

    I recently upgraded my operating system from Vista to Windows 7.  Ibacked up all of my music on an external hard drive before I reformatted my computer.  I have reloaded iTunes several times and attempted to transer my files back to my computer.  Everything appears to transfer but once I remove the external hard drive I get a message stated file cannot be located.  What am I doing wrong?

    I just posted a similar question -- five months later.  Did you ever find a solution?

  • I have recently upgraded my laptop from Vista to Windows 7. All my music is on a windows file, how do I move it to i tunes library

    I have recently upgraded my laptop operating system from Vista to Windows 7. i tunes is asking me to sync my i pod, because it is recognising the Vista laptop and not the Windows 7. All my music has gone from i tunes library but it is all stored in Windows music folder(s). How can I move it all to my i tunes library?

    So your iTunes library is now empty after the upgrade?
    Simply drag the one folder (containing all of your music) into your new empty iTunes library or choose File -> Add to Library in iTunes.
    Otherwise, if they aren't all in one folder, you'll have to drag each seperate one into iTunes.
    B-rock

  • No Sound Devises Detected on my Laptop after an Upgrade from Vista to Windows 7 !

    I   own a hp dv9720us laptop.   I  upgraded from vista to windows 7, and have lost all sound. I've tried about everything , but nothing worked. hp 's site say they no  longer support  driver updates , since 2010. Can anyone help me , Please ?
                                                                                                                                       JIM

    Hi,
    Have you checked this ?
      http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/General-Windows-7-Upgrade-Guide-for-HP-L...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Upgrade from vista to windows 7 home premium

    I want to upgrade from vista to windows home premium but I'm told I need to find out if my computer can actually support windows 7. Can someone tell me how do I find out if my computer is able to be upgraded to windows 7? I have an hp pavilion with a 32 bit operating system, the model number is a6207c. Thank you

    Ok, I tried this and it said I needed to download and install Nvidia graphics driver version 309.08, I downloaded and installed this version just fine. I done option 2 again and now it says download and install version 353.30. I download this version but got an error when I tried to install it that says THIS GRAPHICS DRIVER COULD NOT FIND COMPATIBLE GRAPHICS HARDWARE. Do you know what I should do now to fix this?

  • I have upgreated from vista to windows 7 i am trying to re install my photoshop CS5 put i keep getti

    i have upgreated from vista to windows 7 i am trying to re install my photoshop CS5 put i keep getting
    WARNING: The payload: Adobe Photoshop CS5 Core  {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS5 Core_x64
              This parent relationship is not satisfied, because this payload is not present in this session.
    WARNING: Payload cannot be installed due to dependent operation failure

    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Mylenium

  • I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

    I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

    Drrhythm2 wrote:
    What's the best solution for this? I
    Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

  • Sharing LaserJet 1018 from Vista host to XP users

    I've been sharing my LaserJet 1018 on an XP desktop to several XP laptops for a long time, and it works flawlessly.
    I've now bought a Vista 64 bit desktop, and wish to connect the 1018 to it and share it. (And get rid of the XP desktop). It all seems to work, but then problems arise:
    Printing from a (corporate) XP Pro laptop, I get a message that my print spooler has stopped. I can't print to anything until I reboot the laptop.
    From a (personal) XP Pro laptop, I can print sometimes but not others. I can run a test print, and mostly can print from Internet Explorer, but not from Excel. (!!!) When I can print, I don't get any feedback (such as, "you're out of paper").
    From an XP Home laptop, I'm asked to reinstall the print drivers every time. And then I can't print - I forget the error.
    I've connected each of the laptops to the printer directly (USB) and installed the drivers that way, and they all work flawlessly when directly connected. The Vista machine prints flawlessly, either directly to the printer or over the network to the old XP desktop. When the printer is connected to the old XP desktop everything works perfectly.
    Also, another printer - an Epson Photo printer - connected to the Vista desktop and shared in exactly the same way works flawlessly.
    I've downloaded the drivers appropriate to my operating systems from:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1814094&lc=en&cc=us&dlc=en&lang=en&cc=us&submit=Go%20%C2%BB
    Initially I didn't, but now I've also installed the "other OS" drivers onto the server - no apparent difference.
    This is on a wireless home network. The printer is mapped via IP address and that seems just fine - same as the Epson.
    Any suggestions? This feels like a buggy Vista driver to me.
    Thanks,
    Tim
    Message Edited by TimM on 01-24-2009 03:36 PM
    Message Edited by TimM on 01-24-2009 03:38 PM

    I am having very similar challenge with Vista 64 home premium and laserjet 1020. The Vista 64 spooler file seems to have become corrupted, since the printer worked for several months with vista before the error messages and continues to work fine with my old computer running xp pro. HP chat sessions (14 hours) have been entertaining but unhelpful, and phone support insists that the spooler error is with the printer, which is more than 6 months old. I have rebooted, reinitialized the printer from Vista and dos, reloaded and reinstalled printer drivers.  Did you get a fix for this?

  • How can I print 3 x 5 recipe cards on the C4580? HP Photosmart operating on Vista

    Can I print 3 x 5 recipe cards on my HP Photosmart C4580 printer from Vista operating system?

    Hi,
    No instructions for loading 3x5 cards, please try using the loading envelpoes way:
    a. Pull out the main tray.
    ❑ If the photo tray is open, push it back in.
    ❑ In the main tray, slide paper-width guide outwards.
    ❑ Remove any previously loaded media.
    b. Load envelopes.
    ❑ Insert one or more envelopes into the center of the main tray. The side to be printed on should face down. The flap should be on the left side and facing up.
    ❑ Slide the stack of envelopes forward until it stops.
    ❑ Slide the paper-width guide inward against the stack of envelopes until it stops.
    c. Push the main tray back in, and then open the paper tray extender.
    Hope this helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • No source signal after running an upgrade from Vista to Win7

    I have an HP S2031 monitor and I am getting a No Source Signal message after I ran an upgrade from Vista to Win7 operating system.
    Computer is running and all cables are connected properly. 

    Seems like it is not a monitor problem.
    Disconnect hard disk and disassemble the memory RAM.
    Switch on the pc, then switch it off again.
    Re-connect hard disk and ONE RAM stick only.
    Retry boot with one stick after the other.
    Which pc do you have?
    Do you have an additional graphics card?
    Which output port do you use for the graphics.
    How is it connected to the monitor?
    Which port at the monitor side?
    *** Say 'Thanks' with Kudos ***

  • Can't print from IE 8 after upgrading from Vista to Windows 7

    My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
    I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
    Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
    Any ideas? Thanks for any help.
    Jeff
    This question was solved.
    View Solution.

    (same poster)
    If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
    Specifically, the following steps solved the problem:
    1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
    2. From a command prompt, issue this command:  ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
    Jeff

  • Windows XP Pro SP2 cd-rom after downgrading from Vista

    Hi everybody.
    I successfully downgraded my T61p from Vista to XP Pro SP2 using the downgrade cd-roms send by Lenovo.
    Everything seems to work well. I downloaded all drivers. No problem.
    But I recently installed a rather old software that I frequently used on my old A31p. This software (a Microsoft program !) has automatically modified some files from XP Pro without any autorization. 
    Once it was done, I was asked by the system to insert the original Windows XP Pro SP2 cd-rom to repair this modification.
    Of course, the (Vista to XP) downgrade cd-rom set was not recognized by the Thinkpad as the original XP set.
    An original cd-rom which I finally don't have !
    I tried with an original XP Pro SP2 cd-rom bought a few years ago for my A31p. Unsuccessful.
    Where could I find the XP Pro SP2 cd-rom corresponding to the downgraded system ?
    Thanks for your help and suggestions.
    Regards.
    J.L.
    Jean-Louis L.
    Thinkpad A31p - T42p - T61p - TP Tablet

    James,
    thanks for your answer.
    But I wrote on my first post "I tried with an original XP Pro SP2 cd-rom bought a few years ago for my A31p. Unsuccessful."
    Thus, I don't see any difference between an original Microsoft Windows XP2 Pro SP2 version cd-rom and one created by burning a downloaded version of the OS. An original was not recognized, what would a copy do ?
    If possible, it might be probably better to create an XP Pro SP2 cd-rom from the "Rescue and Recovery" files which were reinstalled when downgrading from Vista to XP. (I hate the word "downgrade" : while I was doing it, I had the feeling I was upgrading my Thinkpad !)
    I have been using for several years (and still use) an A31p (Since 2002, 8 to 10 hours a day) and a T42p. IMHO, the T61p is the same category of "great" notebooks. Thinkpads are really the best notebooks I have ever used. I noted no significant difference between IBM and Lenovo Thinkpads.
    Jean-Louis L.
    Thinkpad A31p - T42p - T61p - TP Tablet

  • I switched from vista and lost all my music and stuff I can't get it back nor can i get all my purchesed items back. Is there anyway I can??

    I really need this fixed its driving me crazy. I wish iTunes had a way of taking all the songs from the iPod and just downloading them to the itunes without having to delete all that is on there. I really want my Purchesed Items back. I wasted probably over 100$ on this....

    Okay, doing my best to ignore the EXTREMELY annoying font you chose to use.
    Is there a reason why you did not create a backup of your media and other important files before switching from Vista?
    It is the users responsibility to back up their media, it is NOT Apple's responsibility.
    When you purchase CD's or DVD's, if you lose them, you repurchase them.  Same deal with digital media.
    If you have a backup of your media, simply copy the files from the backup to your computer.
    If you still have access to your old computer, simply copy the files from it to your new computer.

  • HT4759 I am using Windows 7 Ultimate OS which is a upgarde from Vista on my laptop with Microsoft Office 2003. I am trying to use ICloud with an IPhone 5 and IPad mini to stream photos but can't do this with my laptop or devices using my Three network. Wh

    Can i use my laptop which is running Windows 7 Ultimate upgrade from Vista to stream photos using ICloud. The outlook programme used is 2003 and i my devices are IPad mini and IPhone 5. My problem is that i able to drag pictures into ICloud for it to send to my devices but nothing happens. Why?
    I am grateful for any advice.

    A hard drive if it has failed will sometimes allow you to boot into windows but may not work completely (Eg: In a scenario, where system partition ;where windows is installed works fine but logical partition of hard drive has gone bad).
    On certain conditions, if the hard drive is on verge of failure may/may not respond completely. I would suggest you to run a diagnostics using Seagate Seatools which works on any hard drive irrespective of manufacturer to actually confirm if your hard drive has failed.
    Also, any hard drive can fail in spite of it been 1yr old or 1day old as its all manufactured in bulk and most of it comes from China
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

Maybe you are looking for