EP SP19 Upgrade - Version File Not Updated

Hello!
We have updated EP SP17 to SP19 with minor problems (fixed instantly), the process is through successfully, but the version information is not updated, it still shows the old version. We are confused whether EP is updated to patch SP 19 or not. We appriciate for your advice.
Thanks in Advance
Immanuel

SAP on Windows is concentrating a little more on the operatings system specific aspects.
Therefore I don't expect that your question will be answered here.
regards
Peter

Similar Messages

Enterprise portal version file not found

During sapinst the following error message popped up:
CJS-00328 Enterprise portal version file not found. DIAGNOSIS: The enterprise portal version file was not found at the expected location (6.0.9.0.0). SAPinst cannot check for the required version <#1>. Your enterprise portal software might be too old. Solution: Update the enterprise portal version to <#1> or higher.
Where should I find this version file?
I'm running NW04 SPS16 (Installed from SR1, and successfully updated to SPS16).

SAP Note 847491 is the solution for the problem:
From the note:
Copy the portal version file from its current location to the place where the system copy tool looks for it.
To do so:
Copy the directory:
\usr\sap\<XXX>\SYS\global\portal_versions\*.*
to
\usr\sap\<XXX>\JC<XX>\j2ee\portal_misc\versions
if you are running on a Unix platform make sure that all the files are owned by the j2eeadm:sapsys owner.

The upgrade version will not accept my 'old' serial number

The upgrade version will not accept my 'old' serial number?

I have a CS3 DesignPremium.
I have asked Adope if it was possible to update from this to CS5.5 Design Premium. The answer was, that it was ok for a price round 100 €.
I bought it and under installation it wanted first the new serial number and next the 'old number' (because the old CS was not installed).
The new one is not installed any where els.
Im am working on a MacBook Pro.
The number not accepted is the old CS3 number.
Susanne Jørgensen
/Stefan

Incopy files not updating

Having a problem with Incopy files not updating after designers on Indesign prepare packages on second round of revisions.
First, the designers create an Indesign file and prepare a newly created Incopy package. The editors are able to open the package for the first time. Editors make changes then repackage for designers. Designer then open package from editors and make necessary changes and then repackage back to the editors. At this point, the editors receive a message to replace when opening package. The files open but it doesn't update all the changes that was originally made to it. It as if it is still using the original assignments from the first newly created package. Also, all the assignments have "?" in the assignment window in Incopy. We are unable to figure out how to update the "?" in Incopy or relink or what ever we need to do at this point.
Several things we checked.
1. Unstuffing the package contents from the designers shows all updated file dates. So we know the package contains the newest updated assignment files.
2. If the designers rename the file names on all the assignments in the assignment folder, then repackage. The files open on Incopy with updated changes. But not if the file name remains the same. Also, if the assignment files are all renamed, it doesn't ask to replace anything on Incopy.
At this point. Our only solution is to rename all the assignment files and repackage. But we shouldn't have to be doing this, especially since it adds time to the designers to repackage the files.
Designers using Indesign CS 3 on Mac OS 10.6.4.
Editors using Incopy CS 3 on PC Windows.
Any help would be greatly appreciated.

When the InCopy user opens the assignment package for the first time, it unpacks (it's really like a .zip file) into a folder on their hard drive called InCopy Assignments. The folder is located in My Documents on a PC and in the Home > Documents folder on a Mac.
Every unpacked InCopy assignment package goes into a subfolder within this InCopy Assignments parent folder. Each package's folder is named after the *assignment* name (not the name of the package itself, which is usually the same but not always). So if the assignment name is Chapter1.inca, then the subfolder name will be Chapter1.
When the InCopy user repackages it for the designer, it packages a *copy* of this subfolder. This is the subfolder that Bob is suggesting they delete, after sending off the packaged InDesign file. That's a good idea.
If you can't rely on your editors to do that ... many are very leery of throwing anything away ... then your designers should *rename the assignment* in their Assignments panel before creating an InCopy package for the second or third or whatever time. They can just double-click the assignment in the panel, the Assignment Options dialog box opens, and they can change the name from say "Chapter1" to "Chapter1-v2". They click okay, they choose Package for InCopy, and send it off.
When the editor gets this file and double-clicks it, it unpacks into a different subfolder than before: Chapter1-v2, leaving the Chapter1 subfolder intact. So you avoid the prob of duplicate assignments on the InCopy user's hard drive.
FWIW this was much more of a glitch with CS3. Not sure what Adobe did differently, but assignment packages are much more intelligent in CS4 and CS5.
AM

Linked Images/Files not Updating to Remote Versions

Recently, I've noticed that when I go to upload a new page to our company intranet, any linked images or files do NOT update to the linked versions when they are uploaded --- they are still pointing to the versions on my local drive, so all users see a broken image or are linked to a broken file. I am putting/checking in dependent folders, and the images/files are successfully loaded to the intranet.
I'm able to fix the issue by manually locating the remote versions of the image/file and inserting it into my .html by hand, but obviously I would prefer to be able to do this automatically. This only started happening recently, as I never had trouble automatically updating links. As far as I know, no settings have changed.
This is for CS5. Any ideas? Let me know if there are any relevant settings or info I can provide.

Sounds like you have not created a Site Definition in DW. If you're working within a properly defined local site folder, DW correctly manages paths & assets for you.
Nancy O.

FPJ files not updating upon topic import

Hi, Gang!
We have a large project file that's been maintained seeming forever. It's probably nearly 8 years old and has been upgraded through four or five versions of RoboHelp. To take advantage of some downtime in between versions, we decided to create a fresh project and import all of the content from the age-old project file into a new, pristine project file. Very briefly, the process was:
Create a new project and define a folder hierarchy in the Project Manager to match the original project. That is, create empty directories in the proper hierarchy for the project.
Import one folder at a time, beginning with the lowest levels of each branch and working through the project.
This worked really well except for about 30 broken links. Further investigation refvealed that the broken links were caused by files that imported but did not show up in the project manager because the fpj files didn't update.
I can manually import the missing files and one-by-one, the broken links disappear. But, because the fpj files aren't updating (verified by watching the fpj file for a given directory as I reimport files), the problem topics and resultant broken links reappear when I reopen the project.
By doing this repeatedly, I can occassionally get one or two fpj files to update, slightly changing the number of topics that are missing. But I can't get rid of them all.
I've tried opening the project using the hhp file instead and letting the project rebuild, but that doesn't help.
I've tried resetting the properties of the project directory to ensure that nothing is read-only, but that doesn't help.
I've tried deleting just th fpj files in the problem directories and reimporting but that doesn't help. It creates a new fpj file but it has no topics listed, no matter how many times I try to import.
So, here I sit with a project that's 90% there, were it not for the missing 10% of files that refuse to "stick" because when I import them the fpj files don't update.
(I'm running version 10 and am wondering if version 11 would maybe solve my problem.)
Any advice?
Thanks!
------later that same day-------
If I manually edit the fpj file for every offending directory and paste into it the content from the well behaved fpj files in the original project, the topics stay after project relaunch and the broken links stay resolved. The next step is to see if newly added topics are retained or if, once again, the fpj files are static and refuse to update.
Message was edited by: Rocky_XYZZY to provide additional information

If you want my opinion, forget about manual importing. I normally just
place all topics I want in the directories of the target project and
then fix the fpj files. Much faster than importing one by one. You just
need to make sure to patch all the links to images, style sheets and the
like in the target project. But that only applies if you change the
structure of the project.
You can also copy the information for context sensitivity this way.
To update the fpj files, you can use the following script:
http://www.wvanweelden.eu/product/missing-topics-fixer
Kind regards,
Willam

CSS files not updating correctly

I'm having some trouble with the css files that are uploaded throught the application builder. When uploading an update to an existing css file, the file is not updated in the browser. Even after closing all browser windows and deleting the temporary internet files the new version is not loaded. I've even tried deleting the file from the app builder and holding the control key down when refreshing the browser and it still loads as if one existed. We currently have 3 seperate server environments and it works fine on 2 out of the 3...could this be a setting on the application server when the file is fetched from the database? It is currently calling:
wwv_flow_file_mgr.get_file?p_security_group_id=721404936311769&p_fname=iPRACA.css
I know the correct file is being uploaded to the database because when I view the detailed report in the application builder and click on the file name, the updated version is displayed in the text area. But, when I click on the download icon and open the css file to view, it is still the old version.
I'm currently using APEX version 2.3 and OAS 10.1.2
Any help would be greatly appreciated.

Hi YodaHart,
What happens when you rename your css?
Does it work then?
I also guess it's the Oracle AS. However we should investigate further on what you're thinking.
If you query WWV_FLOW_FILE_OBJECTS$ you still see the files while you don't see them in APEX anymore? If yes, I would create another table as select of the WWV_FLOW_FILE_OBJECTS$ table, just to have a backup. If the files aren't used anymore, you should be save by deleting the corresponding old records (for ex through SQLPLUS). After all, these are files you uploaded...
Thanks,
Dimitri

Modified files not updating/syncing

I have CC installed on my work computer and my home computer.
Yesterday at work I copied some of PSD files to my CC folder on my work computer in order to work on them at home last night.
Got home - files synced perfectly.
I opened them right from where they had synced to in the CC folder on my home computer - completed my work and pressed save.
I watched the updated files syc/update.
This morning I get to work - check my CC folder on my work computer and the files are still the original ones I uploaded yesterday - not the updated ones I worked on last night.
Checked the files on the browser version of CC and same problem.
Any ideas?
Would love to know if there is a trick to get the modified files to show up on my work computer this morning so I don't have to drive home and get them.
Thanks!

I found a solution. I drove home with a flash drive....

Library files not updating

Hi,
I have successfully used library files in my web pages for
years using a past version of Dreamweaver.
I have just started using Dreamweaver MX 2004, and whenever I
update a library file (that has already been inserted in an html
file) the html file is not updated. I started a new web site from
scratch, so am using only files that have been created by this
version of Dreamweaver.
In other words, updating the library file only updates the
library file itself, and doesn't alter the html document that has
the library file inserted into it. This pretty much means that the
library file functionality in Dreamweaver MX 2004 is useless.
Was there a bug fix for this that I needed to get?
Cheers

Try this -
Use Site Manager to export this site definition to a place
you can find.
Then REMOVE this site definition. Then IMPORT the one you
just exported.
Does it work now?
If it does not, can you confirm that your Library items are
in a folder
named "Library" and that this folder is in the root level of
the local site?
Also, are you uploading the local files after you have
changed the Library
item?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"chuckee" <[email protected]> wrote in
message
news:[email protected]...
> Hi there,
> yes I am using 7.0.1.
> I've attached the code of the page that has the Library
file inserted in
> it
> (support.htm).
> Below, I have also attached the library file -
header.lbi - (notice how it
> has
> two links that I added to it later, that did not update
the file that it
> was
> inserted in, after I saved the library file).
>
>
> SUPPORT.HTM
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
> "
http://www.w3.org/TR/html4/loose.dtd">
> <html>
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
> <title>SMTP2Go - Signup</title>
> <style type="text/css">
> 
> </style>
> <link href="style.css" rel="stylesheet"
type="text/css">
> <style type="text/css">
> 
> </style>
> </head>
>
> <body>
> <table width="80%" border="0" align="center">
> <tr>
> <td><div align="right">
> <div align="right">
> <p>Log In</p>
> </div>
> <table width="100%" border="0" cellspacing="2"
cellpadding="0">
> <tr>
> <td width="16%">Home</td>
> <td width="23%">How It Works </td>
> <td width="21%">Sign Up </td>
> <td width="18%">FAQ</td>
> <td width="22%">Support</td>
> </tr>
> </table>
> </div>
> <form name="support" method="post"
action="supportresponse.php">
> </p>
> <table width="65%" border="0" align="center">
> <tr>
> <td colspan="2"><p>We welcome all feedback
to do with SMTP2Go,
> and
> any questions you may have.</p>
> <p> </p></td>
> </tr>
> <tr>
> <td width="28%">Name:</td>
> <td width="72%"><input name="name" type="text"
id="name">
> </td>
> </tr>
> <tr>
> <td> Email Address: </td>
> <td><input name="email" type="text"
id="email">
> </td>
> </tr>
> <tr>
> <td valign="top"><span
class="style2">Message::</span></td>
> <td><textarea name="message" cols="45" rows="6"
> id="message"></textarea>
> <br> </td>
> </tr>
> <tr>
> <td> </td>
> <td><input type="submit" name="Submit"
value="Send"></td>
> </tr>
> </table>
> <p> </p>
> </form>
> </td>
> </tr>
> </table>
> </body>
> </html>
>
>
> HEADER.LBI
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
> <div align="right">
> <p>Log In</p>
> </div>
> <table width="100%" border="0" cellspacing="2"
cellpadding="0">
> <tr>
> <td width="16%">Home </td>
> <td width="23%">How It Works</td>
> <td width="21%"><a href="signup.htm">Sign
Up</a> </td>
> <td width="18%">FAQ</td>
> <td width="22%"><a
href="support.htm">Support</a></td>
> </tr>
> </table>
>

I do not want to upgrade to 7.0, I am attending online college and the upgraded version does not work with my school. How can I stop Firefox from upgrading? I have to keep uninstalling the upgrade and installing the old one.

How can I stop Firefox from automatically upgrading? My on-line college is not compatible with the upgraded version. I have to keep uninstalling the new one and reinstalling the old one.

It's not a good idea to allow websites to redirect to another site until you know for sure the original site is trustworthy.
But if you still want to do it (again not a good idea).
Tools>Options>Advanced>General - In Accessibility, uncheck "warn me when web sites try to redirect..." option.

My Macbook Pro OX S 10.6.8 version will not update!

My Macbook Pro OX S 10.6.8 will not update! I've tried restarting, clearing cookies, checking javascript is turned on, removing 'older versions' of an update, nothing is working. Please help! What else can I do?

I would attempt to do them one-by-one to see if it is one particular update that is hanging it up. I would start with the ones from Apple that are either Security Updates, or Firmware Updates. The ones with the Grey Circle/Arrow in them are important updates, I would attempt to do them first. It may be a bad package from something else that is hanging it up.
If you can successfully install the crucial updates, then afterwards I would try doing all of them.
Also is it just attempting to install but then when you reboot it is still saying you have to update? Or is it giving you an error message about updating?

Photo stream not showing up on iPhone after upgrade and ical not updating calendar on Mac

I just cross upgraded from 4 to 4s. I have 1000 photos in photo stream from old phone and on Mac - after restoring from backup (done right before the phone switch), I only have 161 photos - its not increasing over time....
Is there any way to push this to the phone?
Also, my calendar is not updating in the cloud with items on the phone.

i have also upgraded my phone to a 4S and have an ipad. I will not upgrade to Lion until the primary software i use is made compatable. just spent 30 min with tech support to learn that because of the icloud, i can no longer upload my photos. i can not turn icloud on my mobile devices without losing totally the syncing of my calendar, contacts, mail to my computer running 10.6.8!! If i do turn the feature on, I must create a new identiy on the mobile devices, that identity would take over my calendar, contacts, mail etc, and not sync with my office computer. i asked multiple times if the new identity could be separate from my primary information and was told multiple times no.
unbelievable!!
i suffered all the growing pains (syn) of mobile me and feel now back in the worst days of Apple with some pretty new hardware
is it possible the tech guy was wrong?

Css files not updating in localhost (XAMPP test server)

I've got an issue with a web page I'm developing where the .css files that I attach to the pages will not update on my local host. I can make a copy of the file with a different name and link it to the page. However, if I name any file a name that I've already used then the CSS reverts to whatever was on the original documents. This is making my php page testing a pain when I view the page in a browser. The problem doesn't seem to occur for my other websites, and completely goes away when I select "none" in the testing server options. I'm using XAMPP to run my localhost testing server. I'm using Dreamweaver CS4 on a Vista machine. Any ideas? If nothing else it would be nice to know how to delete the old files that are stuck in the testing server directory.

Strange thing... I turned it off and walked away for a few hours. Upon my return I found the issue resolved. I blame the shoe elves. Thanks, you little guys!

Psd files not updating edited smart objects (PS CC as of 6/3/14)

I created a master PSD file and added four different TIF files as 'linked' (not embedded) Smart Objects. If I edit these linked files (they open when double-clicked, or 'Edit Contents') make changes and then save & close the edited master TIF files, the main PSD file does not reflect the edited changes. If I double click the Smart Object, it opens and shows my edits, but to save & close still does not update the master PSD file. I do this all the time without issue, so I am perplexed. Even if I right-click the smart object and select "Update All Modified Content" nothing changes. Closing the file, restarting Photoshop- nothing updates the main PSD file with the changes to the edited TIF files... EXCEPT if I 'replace contents' with the same file: then it updates the PSD.
Any ideas?

I was actually just working in Illlustrator. Selecting the vector object and then select PS and Paste. I'm then asked if I want this to be a smart object. I select yes and it adds the object as a smart object layer. If I double click the layer it opens it in Illustrator, I make a change, save it and close it. Then back to PS and the smart object doesn't update.
I haven't used Place Embedded or Place Linked. I don't understand what those functions do. It's just not how I'm use to working.
Actually I have a large PSD doc. Inside it is a group of objects that I have turned into a Smart object. Inside that (by double clicking) is an AI file that is also a smart object. When I open that up to make a change it won't update once I save and close.
I have tried a coulpe of test with placed Linked and Embedded objects and I can't get those to work either. So what ever the change was. So far not really liking it.

Files not updating from default.dwt

NONE of my pages are updating from the template that I
created them from. To create them I did the following:
File>New>Templates>Site Name>Template
Name>Create...
Then I'd save the file to whatever I was creating..... such
as, index.htm
I have done this for 6 new pages....
Then I change the links on the template and have it and when
I'm asked if I want to update ALL of the pages that were created
based on that template I answer yes... (obviously)..
But.... the pages do NOT update. it even says so in the
"Update Pages Dialog Box". it says that NO Pages were updated?
Why is that and what possible cause could there be.
I have a Dreamweaver manual and have defined the site about a
dozen times (after removing it first) and I have dome so RIGHT TO
THE BOOK..... but the dang template will NOT update the sites pages
created from it........grrrr..........
Any suggestions? Thanks for any replies.....
HEK

Here are seven common mistakes that will result in changes
not propagating
from Template to child -
1. Rename the Templates folder
2. Move the Templates folder to some other folder level in
the site other
than root level
3. Move a template out of the Templates folder.
4. Make changes to an editable region of the template (which
will not
propagate)
5. Assume that template changes can be uploaded to the server
without also
uploading the changed local files
6. Corrupt the site cache so that the link between template
and child page
is broken
7, Improperly create your child pages by simply opening the
template,
adding page specific content, and resaving the template with
an *.html
extension rather that its *.dwt extension. (you can tell if
this is the case
by looking at the code on a child page - if you see anything
like <!--
TemplateBeginEditable... then this is what you have done)
The 6th problem can be repaired by using SITE | Advanced >
Recreate Site
Cache, and the six others can be fixed by just not doing
them. Have you
done any of those?
Or, read this -
http://www.adobe.com/go/dd83ba8b
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"gramma_hek" <[email protected]> wrote in
message
news:[email protected]...
> NONE of my pages are updating from the template that I
created them from.
> To
> create them I did the following:
>
> File>New>Templates>Site Name>Template
Name>Create...
>
> Then I'd save the file to whatever I was creating.....
such as, index.htm
>
> I have done this for 6 new pages....
>
> Then I change the links on the template and have it and
when I'm asked if
> I
> want to update ALL of the pages that were created based
on that template I
> answer yes... (obviously)..
>
> But.... the pages do NOT update. it even says so in the
"Update Pages
> Dialog
> Box". it says that NO Pages were updated?
>
> Why is that and what possible cause could there be.
>
> I have a Dreamweaver manual and have defined the site
about a dozen times
> (after removing it first) and I have dome so RIGHT TO
THE BOOK..... but
> the
> dang template will NOT update the sites pages created
from
> it........grrrr..........
>
> Any suggestions? Thanks for any replies.....
>
> HEK
>
>
>
>
>
>

EP SP19 Upgrade - Version File Not Updated

Similar Messages

Maybe you are looking for