EP with ECC 6.0 using ITS

Hello All,
We are upgrading from R3 4.7 to ECC 6.0. We currently have EP 7.0 with ITS working alongside R3 4.7.
I am aware ECC 6.0 uses ICM instead of ITS, but will the current ITS 6.40 still work when connected to ECC 6.0? Or will I have to perform the changes so the portal uses the ICM?
Thanks,
Nick.

Nick,
The official line from SAP would be to replace the old ITS based ESS screens with the new ESS 1.0 Business Package content - i.e. the new Webdynpro Java screens. Personally, depending on your circumstances i don't see that it's quite that straight forward, and here's why:
<u>Pros</u>
- Webdynpro is now the "standard" UI for portal end user content. Some of the old ITS technology still works in ECC, but the there is no guarantee how long that will continue.
- You can do a fair bit to the Webdynpro screens (hide fields, add text etc) via personalisation, without any programming.
<u>Cons</u>
- Sap seem to be moving toward developing more and more new content in Webdynpro ABAP. Meanwhile, if you need to change anything significant in the current ESS Webdynpro Java screens you will need to have NWDI installed, and have available developer resources with Java experience.
- If you have custom IAC's in your old ESS that don't have a standard equivalent in the new ESS Business Package, what do you do? Convert them to internal ITS? Rebuild from scratch in Java WD, or ABAP WD?
- Even some of the standard content from the old ESS is not available in the new business package. For example, the old TEM services (PV7I, PV8I) are not delivered, SAP assume you will use the new LSO screens. If you aren't implementing LSO, it's back to the old ITS services??
Sorry if that's not particularly useful, but without knowing the scope of your ESS implementation it's difficult to provide a clearer answer.
Regards,
John

Similar Messages

How to integrate SAP TM8.0 with ECC 6.0

Hi Experts,
Could any one please suggest is there configuration/integration document available to integrate TM8.0 with ECC 6.0 using PI 7.1.
I haven't found any documentation as of now. If there is no document ready can someone suggest what is the approach in the integration and configuration to be done in ECC 6.0, PI 7.1 and TM8.0.
We have TM8.0 installed and content is available in PI 7.1.
Thanks,
Chinna

please confirm, i am no XI expert
In you integration directory.
Create a configuration scenario for this integration scenario Invoiceintegration
Follow steps in the link
http://help.sap.com/saphelp_erp2004/helpdata/EN/c4/b9863f365e4117e10000000a114084/frameset.htm
From the menu open the integration configurator. it open the integration scenario . then you have assign business system etc.
then finally generate.

ITS version compatabiity with ECC 6.0

Hi Experts,
I have to install ITS (server components) at one of my client side to some transaction on web, earlier they were using R/3 4.6 and they switched to ECC 6.0
Please tel me which ITS version is comatable with ECC 6.0
I installed server components (ITS) from R/3 4.7 cd pack but i was unable to publich internet services from se80, (published successfully message on status bar but no service in the c:\program files\SAP\ITS\6.20\service folder)
Then I tried to install ITS from ECC 6.0 cd pack but i was unable to install it. the setup.bat file ask for sapinst.exe file but its not in the CD(i also checked in another ECC6.0 pack )
I dont no which one is compatable with ECC6.0, i have to generate web services for some customised transactions, can anyone tel me how to solve this pproblem of installation or if any other way to generate web services please tel me the procedure...
Regards
Manish

Instead of PZM3, use the Homepage Framework to launch your ESS offering (HF is configured in the IMG and tied to the XSS Java components that will need to be installed as well). You can run ESS standalone in this manner although SAP frowns on it (hey, they want to sale the portal! haha).

ITS 6.1 compatability with ECC 6.0

Hi,
can you say me whether ITS 6.1 is compatable with ECC 6.0?
Thanks,
Architha

Hi,
latest ITS standalone version was 6.20.
But this can not be used with systems based on 7.0 kernel. Here you should use the integrated ITS.
You can also have look at Notes 905135 and 197746.
Regards
Guido

After ios 8 update I can no longer play music through my car. I have a 2012 Nissan Rogue - whihc has its own cable made to use with iPhone 4 - I use a apple adapter to converst to use with 5.

After ios 8 update I can no longer play music through my car. I have a 2012 Nissan Rogue - which has its own cable made to use with iPhone 4 - I use a apple adapter to converst to use with 5. Has been working fine up until update. Is there a fix for this? The car does not have usb

Here I come to save the daaaaaaaaaay!!!
Had the same issue with my Nissan Rogue 2011.
This listed below will fix it...
Go to General > Restrictions > CarPlay -- Make sure Carplay is DISABLED. (The new IOS 8 enables this on default)
Go to General > Reset > Reset Network Settings
The Nissan Rogue radio system was never designed to work with CarPlay. By default, CarPlay feature comes enabled when you install IOS 8. Suckz, right?
You're very welcome! Have a great day!
Sincerely,
The Superhero

ITS Integration with ECC 6.0

Hi
we are doing upgrade from 4.6c to ECC 6.0. It is technical upgrade. In SAP HR, we are using ESS timesheet entry (CATW). Now during upgrade we are facing problem in using ESS timesheet as we are using ITS server and SAP ECC 6.0 does not support ITS anymore. As the result the system doesn't allow to enter time data and save it through ESS, the error message it gives is "No Posted Data for 5_CPR_EXTID 5( Include LCATS_ITSF10)" but if we enter time in SAP directly then it is working fine.

Replying to this old post hoping for some answers.
We had researched this and converted to Integrated ITS using our ZCATW over a year ago. The notes read that while integrated ITS is a suppoted platform, ESS scenarios for which newer technology exists are no longer supported. We tested ZCATW under ECC5 and decided to move forward because of a pending technical upgrade. We are now in the middle of the technical upgrade and wishing to keep it technical we are trying to keep ZCATW going and then look at the newer components as a seperate project. Has anyone found a way to overcome the above issue in CATW/ECC6?
Thanks,
Doug

Report on Leave request (with HTML ) using ITS version

we are using ITS version of ESS and MSS version EP 6.0 and SAP R/3 5.0.
Our client wants a report on Leave Request(with HTML). the worflow used is WS20000081. my question is there any standard report to check the Leave Request which are approved or rejected. In SAP there is one standard report
RPTARQDBVIEW where in when we execute no output exists.
Please help me whether is there any report to view the leave requests.
Regards
Santosh Ghanwar

Dear Claude;
Thanks for your kind assistance... I was out for sometime & got up in some other urgent tasks...
Sorry for delay...
I had created the loop Payroll? with following conditions
&Employee.ControlRecordState&     =          1     or
&Employee.ControlRecordState&     =           2     or
&Employee.ControlRecordState&   =          3     or
&Employee.ControlRecordDate&     <           %Current Date%
but result is always "True"
Please help me out...
Best Regards,

I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. What can I do?

I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Is it possible to use XSS 2005 on EP7 with ECC 5.0 ?

Hi all,
I have an ECC5.0 and I want to upgrade my EP6 to EP7. I'm using XSS 2004 on EP6 and I want to use XSS 2005 on that EP7. I've seen on different notes that it is not possible to use XSS 2005 with ECC 5.0 as a back end.
Is there any solution to connect XSS 2005 to ECC 5.0 ??? Please I really need a positive answer
Thanks,

Hi Joseph,
I have gone thru same problem in my last project but my situation was little different.
Actually Business Package of ESS/MSS has two components:
1. Portal Objects (iView, Roles, Pages etc )
2. XSS - The Java WebDynpro Code (which in turn contain 3 component SAP_ESS, SAP_MSS, PUSIC_GP)
Also the prerequisite is that we should have SAP_HR (will give HR functionalities in ECC) and EA_HR (contains RFC, structure required for XSS).
Now the restriction imposed by SAP is that SAP_HR, EA_HR and XSS should be on same version and patch level. Make sense also. However there are situation where you can deviate from above restriction. (I will explain the same below).
So what you can do is to install the Portal objects(iView, Roles, Pages etc ) on EP 7.0 (can be installed on EP 6.0 and federated to EP 7.0), install XSS 2004 on EP6.0 (having JAVA 640) and connect the same with ECC 5.0.
You are looking to install Portal Objects, XSS 2005 on EP 7.0 and connect with ECC 5.0. This is possible but NOT recommended. Actually XSS 2005 WebDynpro will look for enhanced structures, RFC in ECC, which XSS will not find and will throw dumps (sometime java and sometime SAP dumps). You can fix the problem by manually installing the new functionality but believe me it is VERY cumbersome task and will make your system highly unstable.
What I would advise you is to look into your requirement once again and educate your end client with the problem and take appropriate action accordingly.
Do let me know if you need any further help.
Cheers,
AB

ITS Transaction Launcher to ECC logs on using previous ID of previous user

Hi
we're using ITS to open transactions in SAP ECC.
however, the user ID logs on to ECC using transaction launcher ITS does not log off each time we log off from CRM. even different users of CRM using same pc, the ECC will remain open using the first person ID.
detail problem as follow
1. Johnlogs on to CRM using his user ID
2. John calls ECC tcode from transaction launcher ITS
3. John logs on to ECC using his user ID
4. John logs off from CRM
5. then from same pc, Angel logs on using her own user ID
6. Angel calls ECC tcode from transaction launcher ITS. this time she does not need to log on as ECC as it is still open under John - which we don't want
any lead is really appreciated
JD

Hi
we're using ITS to open transactions in SAP ECC.
however, the user ID logs on to ECC using transaction launcher ITS does not log off each time we log off from CRM. even different users of CRM using same pc, the ECC will remain open using the first person ID.
detail problem as follow
1. Johnlogs on to CRM using his user ID
2. John calls ECC tcode from transaction launcher ITS
3. John logs on to ECC using his user ID
4. John logs off from CRM
5. then from same pc, Angel logs on using her own user ID
6. Angel calls ECC tcode from transaction launcher ITS. this time she does not need to log on as ECC as it is still open under John - which we don't want
any lead is really appreciated
JD

My old boss is using info that is still being sharded with the mac i used. She is violating my privacy. How can I disconnect with that computer. I do have its serial

I quit my job 5 weeks ago and just found out that my old boss is reading all my text, email, facebook, etc on my macbook air that I used while employed. How can I stop sharring info with that computer.I have its serial#, etc

Change the password on your iCloud account and on any other email accounts.
If you had Find My Mac setup on the Mac Air you could log in to your iCloud account at iCloud.com, go to the Find My Mac section and either wipe the Air clean or lock it.
That's pretty drastic and might bring consequenses.
OT

Will "BW 3.1" work with ECC 6.0 ??--------its urgent

One client is using BW 3.1 version. He wants to upgrade SAP from version 4.7 to ECC 6.0
But he does not want to upgrade BW right now.
1) Will "BW 3.1" work with ECC 6.0 ??
2) Do we have to upgrade BW also? Is it mandatory or we can avoid it?
You may get the information on SAP website or 'bw user community'
regards
Pushkar
Regards

Hi Pushkar,
You've posted this on a forum dedicated to development of SAP's Business One product, which is not related to R3 or A1. I recommend you repost your question on one of the R3 forums (options on the left hand menu).
Kind Regards,
Owen
P.S. Please don't use the word 'Urgent' on these forums. It just annoys people and is more likely to get your answer ignored than answered.

If client uses all the APO modules along with ECC then what is the CIF role in DP

Hi All,
As per my knowledge if the client is using only SAP ECC and DP then CIF does not play any role but what about if client uses all the APO modules along with ECC then what is the CIF role in DP ?
Thanks in advance ..

Hi Vinod,
i am aware all the above details what u mentioned.
Generally i am extracting the historical data from Excel to BI in DP- @ my project.
But if the data is in SAP ECC then do we need to use CIF to extract the data to BI in DP... so what is the role of CIF in DP if client uses only DP module? and if the client uses all the APO modules then what is the role of CIF in DP especially ?....awaiting for ur response....
Thanks.

Hey i have this problem with my mac.. that its on its own shuts itself whenever i m using google chrome..i updated to yosemite but the problem never ended and i m experiecing unexplained shutdowns

hey i have this problem with my mac.. that its on its own shuts itself whenever i m using google chrome..i updated to yosemite but the problem never ended and i m experiecing unexplained shutdowns

Hi doctor.saddam,
If your MacBook Pro is shutting down unexpectedly, I would suggest that you troubleshoot using the steps in this article -
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

My iPhone 5 its running IOS6.4 and just work with wifi, when I use 3G I can't send or receive any data

My iPhone 5 its running IOS6.4 and just work with wifi, when I use 3G I can't send or receive any data

Try resetting all network settings, or turn the airplane mode on then off, or restarting the device itself
if all else fails, do a restore (Back-up everything before doing this)
if it still fails, contact apple or your wireless carrier.

EP with ECC 6.0 using ITS

Similar Messages

Maybe you are looking for