EP5 exporting page object errors

Hi,
When I export a PAGE object, I get the below error
Export Results
Exporting package C:\Enterprise Portal\DataFile\data\Export\package.pkg
Error exporting page TestComp: Error in ExportalService download Page from Server: Connection refused: connect
Export completed
Could some please give me explanation why this is erroring? How to prevent this download and successfully download PAGE object?
Thanks
Siva

Thank you for responding and the information, Scott. I used Document Setup and matched the height and width of the document to the bounding box of the grouped image and it worked perfectly.
Thank you again.
Barry

Similar Messages

Pages shows error when trying to export to Word

Today, without doing any updates or making any changes to my MacBook, Pages has decided that it won't export documents to Word or PDF, showing me an error message after attempting to export. I've googled forums to try & find a solution, but all I can find is that it's something to do with Style. The Page documents are in exactly the same style etc as I was working on yesterday when I was successfully able to export documents to Word. Can anyone help please? I need to upload as Word documents for uni.

May this thread be helpful for you?
Can't export pages to word
Have you tried to save any other pages file as Word, not only the documents for university?. Create a new file a write a word there then try to save it as a Word document. If it does, then the problem is in your University document as it may contain something incompatible with exporting to Word.

JCOM manpulation error: weblogic Error BEA-210000 Export of object barred

Hi everyone,
I'm trying to access a COM (MSWORD.OLB ) object from weblogic .
I've writing a sample Java proggram to access some methods of my COM Object.
But during the runtime, i got the following BEA weblogic error :
*<Error> <COM> <BEA-210000> <Export of object: com.linar.jintegra.Variant@b96c73 barred>*
com.linar.jintegra.a
 at com.linar.jintegra.ba.c(Unknown Source)
 at com.linar.jintegra.ba.a(Unknown Source)
 at com.linar.jintegra.Variant.<init>(Unknown Source)
 at com.linar.jintegra.Marshaller.a(Unknown Source)
 at com.linar.jintegra.Marshaller.a(Unknown Source)
 at com.linar.jintegra.Marshaller.b(Unknown Source)
 at com.linar.jintegra.Dispatch.vtblInvoke(Unknown Source)
 at word.DocumentsProxy.open(Unknown Source)
Any ideas to solve this problem ?
Thanks
Sergio
Edited by: user11108138 on 10 févr. 2012 02:24

Sorry for delay!!
I tried W2KSP1, W2KSP2 and XPpro on several P3 / P4 with 256 / 521 RAM.
Uli
"dan seeman" <[email protected]> schrieb im Newsbeitrag
news:[email protected]..
Hi,
One last question. Can you tell me more about what OS you have theWLServer
installed on (machine type, OS and version)?
Thanks in advance.
dan
Uli Schulze-Eyssing wrote:
Hi Dan,
wl70 release
Uli
"dan seeman" <[email protected]> schrieb im Newsbeitrag
news:[email protected]..
What version of WLS you are using?
dan
Uli Schulze-Eyssing wrote:
We are trying to use jCOM to connect to our WL-App. (We had been
using
JIntegra before)
I made a simple JCom-Helper identical to the one, delivered in the
earlybound-sample.
Trying to create an object in VB couses the server to say:
<03.05.2002 15:11:58 CEST> <Error> <COM> <210000> <IOXIDResolveropNum 5
invoked. This method is not implemented.>
<03.05.2002 15:11:58 CEST> <Error> <socket> <000413> <Failure in
processSockets() - GetData: weblogic.socket.NTSocketMuxer$GetData -fd:
'2324', numBytes: '654'
java.lang.NullPointerException
java.lang.NullPointerException
atweblogic.com.MuxableSocketDCOM.isMessageComplete(MuxableSocketDCOM.ja
>>>>
va:182)
atweblogic.com.MuxableSocketDCOM.dispatch(MuxableSocketDCOM.java:203)
>>>>
atweblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:667)
>>>>
atweblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:
>>>>
23)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
>
and no object is created (VB hangs in waiting for the object)
In the FAQ I can read:
065070
There is a known issue with the logging of WebLogic Server jCOMerror
messages. COM warnings are incorrectly logged as errors, as in thisexample:
<Error> <COM> <210000> <IOXIDResolveropNum 5 invoked. This method is
not
implemented.>
So: I know, this is only a warning, but where is my object? ;-)
Can s/o tell me?
Many thanks,
Uli

I cannot sign in. I get error "404" when I try, then it takes me to a "Fill and Sign" page. Not to Export page

I cannot sign in. I get error "404" when I try, then it takes me to a "Fill and Sign" page. Not to Export page. At that point, there are no options to do anything else.

It seems to have started to work now... so who knows.

Can I export solid objects into Illustrator / InDesign CS2 and maintain vector format

Can Adobe 3D export solid objects in vector format into Illustrator or InDesign CS2 suite?
I'm interested in taking solid 3D objects developed in Pro/E 2.0 and import from Adobe 3D into Adobe Illustrator & InDesign in vector format for page layout. I want to import solid objects in vector format and maintain color scheme and surface textures.
I'm running 3D trial version and can successfully import 3D objects (asm & prt files) solid views from Pro/E but can only export wireframe views from Adobe 3D Toolkit into Illustrator or InDesign (CS2). Solid objects first have to get rendered in a raster format before importing into Illustrator.
If this function is not supported does anyone have experience doing this using Quadraspace or Right Hemisphere 3D software?

Any help???? After 2 weeks I still can't learn from Adobe or Right Hemisphere people how to import solid objects in vector format into Illustrator with color and surface textures in place. All imported objects in vector format are converted to a wireframe or line format unless they are first rasterized.

The Creation of Export DataSource Failed Error while transporting ODS Cube

Hi All,
I am facing this issue from last 1 week.. i had developed an ODS cube in APO-DP BW which will fetch data from SAP R/3 and its working fine in APO Dev Server. But when i transport this cube into APO PAC(Prodn Server) the below error i am getting..
   Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
   The creation of the export DataSource failed
   Password logon no longer possible - too many failed attempts
   Password logon no longer possible - too many failed attempts
   Error when creating the export DataSource and dependent Objects
   Error when activating DataStore Object ZANAUTSL
I also updated the transport conversion tables but still problem not resolved.
Immediate help is hightly appreciated.
Thanx
AJ

Hi AJ,
Looking at your error, it seems that the RFC user's password is locked and hence connectivity from R/3 towards APO BW is broken.
You know the name of your export datasource (from R/3 to APO BW). Find out the name of your R/3 source system e.g. PACCLT000, by scrolling to the right against teh export data source.
Take help of your Basis or EAI team to identify the RFC destination corresponding to the connectivity from the R/3 source system (PACCLT000) to your APO BW system. (If needed ask for help from your BW team, I am not very sure how connectivity would be set up from R/3 to APO BW, I guess this would be independent from CIF connectivity)
For this RFC connection from R/3 to APO BW, see which RFC user is maintained in SM59 in APO and ask your security team to reset (or unlock) the password of this RFC user in R/3, and then if required update the user password details in SM59 in APO also.
After this, your issue should get resolved.
Thanks - Pawan

HP B8850 Page Size Error Printing from Aperture 2 (or iPhoto)

I am trying to print on 13x19 (B+) size paper to an HP Photosmart Pro B8850 printer. I get this error when printing from Aperture --> "Page Size Error: Paper size selected in the print driver does not match the paper loaded in the printer IN tray."
Aperture 2.1.2
Mac OS X 10.5.6
HP Photosmart Pro B8800 Series Print Driver 2.3.1
I can set the paper size to 13x19 (B+) in the Aperture print dialog, but under the Print Settings button there is no option for paper size, only paper type. So apparently the size that the printer is expecting in the driver does not match the 13x19 that is loaded in the printer. I was able to verify this by leaving all print settings for 13x19 and loading an 8.5 x 11 sheet in the printer. It pulled the paper through and started printing, but the print was scaled to fit onto the 8.5 x 11!
So in other words, the way I'm seeing it, even though I am setting the paper size for 13x19 in Aperture's print dialog, the printer thinks it's suppose to print on 8.5 x 11.
To make matters worse, there is no Page Setup menu item in Aperture to set the paper size in the print driver directly. I would have assumed that the Aperture print dialog was "smart enough" to pass the page size parameter to the HP printer driver, but that is apparently not happening.
I spoke with HP tech support and they were surprisingly helpful. With their help I was able to print on 13x19 paper with HP's bundled software package, but I had to export my file from Aperture and import it into HP's software. Now that's a good first step which assured me there is nothing wrong with the printer itself, but obviously I purchased Aperture to use it's more elegant and supposedly streamlined interface to make my prints.
Has anyone had a similar problem? Any solutions? Suggestions? I have searched this forum, HP's support forum, DP Review, Google and not finding much. I can't believe I'm the only guy trying to print on 13 x 19 from Aperture using this printer. I suspect it's not printer specific though. Could be my system I guess. I plan on calling Apple Care depending on what type of response I get here.

I don't know if this may help, but recently we had a discussion about problems with Aperture's custom paper size not working correctly:
The solution was to define a paper size outside Aperture:
In any application, for example Preview, try to print something and the print dialog comes up. At this point click on Paper size and choose Manage Custom Sizes. You can define a new paper size here. This new custom size will then appear when you go to Aperture print dialog under paper size. It solved my problems with custom paper sizes here, for some reason (a bug?) defining a custom paper size within Aperture itself did not work correctly for me.

"Invalid Annotation Object" error

I'm using Windows XP Pro (SP3) on a 2.66 GHz, 2 GB RAM computer, and while working in an Adobe Acrobat 9 document, I had just saved the file (CTRL+S) and the document froze and I got a Windows error box that asked if I wanted to send an error report, which I did. When I opened Adobe again, it asked if I wanted to open the last file which didn't save correctly, which I did.
Then when I proceeded to work in the document and tried to highlight a sentence I was going to delete, I got an Adobe Acrobat popup box that said "Invalid Annotation Object. OK" but no matter how many times I clicked on "OK," the box kept popping up and wouldn't go away. I tried saving a copy of the document, but the same box was in it and wouldn't go away. I couldn't even work in the document to extract pages or anything else. Huge problem!
Does anyone know what can I do to resolve this problem? (This happened on a Saturday when Adobe phone support is not accessible.)

On 3/24/2015 same problems, after Adobe Acrobat 9 pro. crashed while I added text boxes.. When I opened Adobe again, Yes to open the last file which didn't save correctly, then "Invalid Annotation Object" errors on my .pdf file of 96 pages
- first, I had to acknowledge/click the OK button until all " invalid annotation objects" error pop-up windows are gone
(for my file with 96 pages, i had to hit the OK button more than hundreds times - need patience)
- then found out (later) that what I did turn out to be the same steps as following post by davidsdomingo in adobe.forums
davidsdomingo May 28, 2009 1:39 PM (in response to (Holger_Wulf))
Here is a technique for identifying all the pages that have invalid annotation objects on them:
1. Document > Extract Pages ...
•Select the checkbox for "Extract Pages As Separate Files"
•Set the destination to a 'dedicated' folder that won't contain any other files -- that way, you can simply delete the folder when this process is done.
•Click OK.
2. During the extraction, click OK in all the message boxes that appear.
3. After the extraction, look in the destination folder to see which pages are missing. Those are the pages that have invalid annotation objects.
From this point you can try to delete the objects, or simply delete and replace the pages, or implement a different solution. Hope this helps someone.
- after extract the 96-pages file into individual files into a dedicated folder, only 95 got extracted and page 1 was not/can not be extracted.
- I then combined the 95 good extracted pages into a new file name .pdf
- then inserted a good page 1 without error (from the file that was saved previous day, prior to all the changes I made on the corrupted file), re work on page 1
- delete the bad file.
Hope this helps someone.

Adobe "Invalid annotation object" error

We recieve a specific error message on a few PDFs. Some from documents converted from 2007 Word and others out of Outlook 2007 through the PDF print function. While moving the mouse over certain comments the users has placed on the document in the PDF format, Acrobat 9.9.3 throws this error. We've tried to delete the bad refs and other times have just started a new document, print to PDF while starting over. Any ideas on why this is happining, what might be causing this and what we can do to reslove this problem. I cannot seem to duplicate the problem a few see. Any thoughts or solutions would be greatly appreciated. Best regards, Brian

On 3/24/2015 same problems, after Adobe Acrobat 9 pro. crashed while I added text boxes.. When I opened Adobe again, Yes to open the last file which didn't save correctly, then "Invalid Annotation Object" errors on my .pdf file of 96 pages
- first, I had to acknowledge/click the OK button until all " invalid annotation objects" error pop-up windows are gone
(for my file with 96 pages, i had to hit the OK button more than hundreds times - need patience)
- then found out (later) that what I did turn out to be the same steps as following post by davidsdomingo in adobe.forums
davidsdomingo May 28, 2009 1:39 PM (in response to (Holger_Wulf))
Here is a technique for identifying all the pages that have invalid annotation objects on them:
1. Document > Extract Pages ...
•Select the checkbox for "Extract Pages As Separate Files"
•Set the destination to a 'dedicated' folder that won't contain any other files -- that way, you can simply delete the folder when this process is done.
•Click OK.
2. During the extraction, click OK in all the message boxes that appear.
3. After the extraction, look in the destination folder to see which pages are missing. Those are the pages that have invalid annotation objects.
From this point you can try to delete the objects, or simply delete and replace the pages, or implement a different solution. Hope this helps someone.
- after extract the 96-pages file into individual files into a dedicated folder, only 95 got extracted and page 1 was not/can not be extracted.
- I then combined the 95 good extracted pages into a new file name .pdf
- then inserted a good page 1 without error (from the file that was saved previous day, prior to all the changes I made on the corrupted file), re work on page 1
- delete the bad file.
Hope this helps someone.

InDesign Master Pages; complication with re-appearing master page objects

Hi everybody!
A short intro to understand the problem: I'm working on a commemorative journal for a dinner that people are submitting text based ads to little by little. The types of ads are divided into different chapters so I made different master page spreads for each section. The ads need to be in alphabetical order so as they come in, I add new pages into the layout and place the ad text into the text box.
Here is the basic structure of my master spreads: there is a text box on each side of the spread that contains an anchored object. I'm using that object as a separator to separate between the ad text and the name of the person who placed the ad. When I insert the ad text, I'm releasing the text box master object and I'm inserting and formatting the text.
Here's the problem: when I add pages to the layout and the pages already in my layout shuffle, in some instances the text box with the anchored object re-appears behind what I've already done through the text (the anchored object is a dotted line so there ends up being a dotted line through the middle of the text). For example, if I have master page A applied to page 3 (right side of spread), when I add a page before 3 (making page 3 into page 4 and a left side of spread), the master object text box containing the anchored object appears behind the one that was the original master object that I released and inserted text into.
I did some experimenting and I found that this only happens when I add an odd number of pages. When I add an even number of pages, the additional master page object doesn’t appear. Also, if I add one page after adding a page, the extra master object disappears. I'm assuming that this is because when I add an odd amount of pages the spread with my text switches sides and the master object from the other side of the spread is appearing. Also, if I manually remove the new master object that appears, a new master object does not appear if I shuffle it again.
Solutions I came up with were either just manually going through the document at the end of the project and removing the extra master objects or applying a white background to the text box so that it would the block the new master object that appears. However, I think there has to be a better solution would be more automatic, leaving less room for human error and being less sloppy that giving white backgrounds to all the text boxes.
In short, I think the problem is that when my pages are being switched to the opposite side of the spread it is adding the master objects of the side of the spread it switched to. So would there be a way to prevent that from happening?
Looking forward to what you guys think.

In short, I think the problem is that when my pages are being switched to the opposite side of the spread it is adding the master objects of the side of the spread it switched to. So would there be a way to prevent that from happening?
That is correct behavior. You could stop using master page objects. Instead, make your anchored frames into a snippet or a library object so that you can drag and drop the thing onto a fresh page for that next arriving ad. I would make the master pages show only grid lines and margin and column guides.
If in CS6, and you are on the master pages, and you designate the selected frame as Primary Text frame, then that might not happen (if I understand your description, which I sorta don't)

Expected a dict object error message

When attempting to open a PDF file in Reader sometimes get the "Expected a dict object" error message.

Did you ever find the answer to this problem?? I am having the same problem with
my Acrobat 9 Pro document. When trying to insert a page to the document (300 pages long) I get the error message "expected a dict object
Would appreciate any tips you can give me.

Master Page objects

Bob, I can't find my previous thread, I don't even remember its name. So I am opening a new one, hope I'm not close to spamming by doing this. I had some problems with the objects on the master page, they didn't come out when exporting to PDF. Well, I somehow fixed it, I don't know exactly how, but I think there was another object in front of it, that became visible only on the PDF, covering my object. Maybe you can better guess what happened cause I surely can't.
As I've already opened a new topic, I'll use this opportunity to ask if there is any possibility to activate the objects placed on the master pages from aleatory pages of the document. I mean, if I want to bring forth a master page object on let's say page 5 and place it on top of something else, but leave the other master page objects where they were, can I do that? Or do I have to apply None on page 5 instead of Master Page, and copy the object from the master and place it on the page I'm working in.
Hope I didn't piffle to much and was clear enough.

all objects from MasterPages as always placed beneath of objects placed directly on regular Page from the same Layer
if you need to bring some object placed on MasterPage above object(s) on regular page - you need to click SHIFT+CTRL+LeftMouseButton on this object and override it on current page
robin
www.adobescripts.com

Spry = Exception caught while loading data.xml [object Error]

Exception caught while loading data.xml [object Error]
I get this mistake message then I look in the Browser to my
create html page with put in the xml file by Spry. All my xml files
are not shows, its shows only the error massage.
What can I do for the repair it?
Thanks in advance for you answer and regards.

Hi Jay,
While in theory it should work offline, you have run into
the main issue.
IE7 has a security limitation that prevents the ActiveX
control that does the XMLHttpRequest from working from the local
file system.
Without being about to control the viewing environment, you
can't guarantee it will work in all instances.
It will work if running off a web server (
http://localhost or otherwise).
I wouldn't recommend it for offline use unless you can
control the usage.
Let me know if you have further questions.
Thanks,
Donald Booth
Adobe Spry Team

Exception caught while loading clients.xml: [object Error] in IE

I’m following lesson 9 from Adobe Dreamweaver CS3
Classroom in a Book which starts with viewing in a browser the
final web page provided on the CD that comes with the book.
The problem is that when I browse that file, IE 7 gives this
error:
quote:
Exception caught while loading clients.xml: [object Error]
Other browsers and versions of IE display the
page fine.
From Dreamweaver I ran Browser Compatibility check and it
reported this:
quote:
Found 1 errors in external css files
Affects: Firefox 1.5; Internet Explorer 6.0, 7.0; Netscape
8.0; Opera 8.0, 9.0
Found 2 errors in external css files
Affects: Internet Explorer for Macintosh 5.2
Found 3 errors in external css files
Affects: Safari 2.0
All errors point to this code from the same
line:
href="css/main.css
and the whole line is:
<link href="css/main.css" rel="stylesheet" type="text/css"
media="screen" />
I also ran validation of the file and it reported this:
quote:
2 The tag: "html" doesn't have an attribute: "xmlns:spry" in
currently active versions.[XHTML 1.0 transitional]
114 The tag: "div" doesn't have an attribute: "spry:region"
in currently active versions.[XHTML 1.0 transitional]
117 The tag: "th" doesn't have an attribute: "spry:sort" in
currently active versions.[XHTML 1.0 transitional]
118 The tag: "th" doesn't have an attribute: "spry:sort" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:setrow" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:select" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:repeat" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:odd" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:hover" in
currently active versions.[XHTML 1.0 transitional]
128 The tag: "div" doesn't have an attribute:
"spry:detailregion" in currently active versions.[XHTML 1.0
transitional]
129 The tag: "div" doesn't have an attribute: "tabindex" in
currently active versions.[XHTML 1.0 transitional]
134 The tag: "div" doesn't have an attribute:
"spry:detailregion" in currently active versions.[XHTML 1.0
transitional]
143 The tag: "div" doesn't have an attribute:
"spry:detailregion" in currently active versions.[XHTML 1.0
transitional]
The problem is that I don’t know what to do next and if
and how this file can be fixed.
Will appreciate greatly your help
Thank you

Another bump
hoping the experts here might help if they check the files, I
uploaded the project on a public site. You can download it from
here:
http://savefile.com/files/1452147
at he bottom of the page click Download and on the next page
at the bottom click Download file now
These are the troubleshooting steps and solutions I
attempted.
After I ran check Browser Compatibility it showed problems
located in main.css file
I opened main.css and ran Browser Compatibility there too.
The problems were listed as the following:
Error Unsupported property: content
Internet Explorer 6.0, 7.0; Internet Explorer for Macintosh
5.2
line 75 .clearfix:after { content: "."; display: block;
height: 0; clear: both; visibility: hidden; }
Error Unsupported property: zoom
Firefox 1.5; Internet Explorer for Macintosh 5.2; Netscape
8.0; Opera 8.0, 9.0; Safari 2.0
line 82 .clearfix { zoom: 1; }
Error Unsupported value: 'hand'
Safari 2.0
line 150 .hoverRow, .selectRow{ background-color: #FFFF00;
cursor: pointer; cursor: hand; }
also lines 157
Warning Unsupported value: 'hand'
Firefox 1.5; Internet Explorer 6.0, 7.0; Internet Explorer
for Macintosh 5.2; Netscape 8.0
line 150 .hoverRow, .selectRow{ background-color: #FFFF00;
cursor: pointer; cursor: hand; }
also lines 157
I deleted unsupported properties and changed the unsupported
value of hand to default and saved the main.css.
Unfortunately IE still couldn't render the page showing the
same error.
I searched the CSS Advisor web site and even entire Google
but except a few people reporting the same error no solution was
posted.
I also tied to contact the publisher of the book but I didn't
get any replies with solutions yet.
Since this is a learning project I'm trying to prepare myself
for real live scenarios and wonder what experienced users would do
when facing a similar problem if the project was for a client. What
would you do. What is an acceptable practice? If you can't find a
solution what would you say to your clients "well IE 7 can't render
certain things from your page and there is nothing I can do about
it"?
I'll appreciate any input

XMP property for a page object not predefined and no extension schema...

In attempting to make PDF/A-1b files, I get the Preflight error "XMP property for a page object not predefined and no extension schema present."
Every page reports the same Trigger values:
=> Property exists in predefined schema (XMP 2004): is not true
=> Extension schema is present in XMP: is not true
By following the suggestions in the Acrobat 9 Help page "Edit document metadata" I can save existing metadata to an external .xmp file, but I cannot change the XMP metadata to solve the Preflight error.
I would be grateful for suggestions re how to solve the Preflight error.
Thanks,
Raphael

There is still that same problem.
Pictures what needed to converted tot PDF/A
My situation is large JPEG's.
My workaround to print it out with adobe pdf printer with the options
1) papiersource on base of pageformat PDF
2) If needed use adjusted paperformat

EP5 exporting page object errors

Similar Messages

Maybe you are looking for