EP5-work experience and Educational Qualifications integration with e Recru

Hi
The work experience and Educational Qualifications are already maintained for an employee at the ECC level. Does the EP5 system display this data for the same person as internal candidate?
Thanks in advance

Hi,
work experience - no
qualification - it is possible depending on the way of the qualification integration used. Check documentation on system parameter RECFA HRQUA (found in IMG node description for E-Recruiting -> Technical Settings -> Set System Parameters).
Kind Regards
Roman

Similar Messages

I have an Imac operating system 10.4.1 and Apple Works 6 and am having problems with Aplle Works 6. Is there a place I can download Apple Works 6 onto my computer?

I have an Imac operating system 10.4.1 and Apple Works 6 and am having problems with Aplle Works 6. It shuts down before I am finished. Is there a place I can download Apple Works 6 onto my computer free?

AppleWorks has never been available for legal download.
Have you done the usual trouble shooting steps:
Quit AppleWorks
Delete most or all of the Recent Items list.
Remove the Preferences files to the Desktop or to the Trash.
Launch AppleWorks to see if the problems remain.
You'll find Recent Items in:
username > Documents > AppleWorks User Documents > Starting Points > Recent Items
There are several preferences files.
Go to:
username > Library > Preferences
Locate, select and delete the file com.apple.appleworks.plist
Still in the Preferences floder, locate and open the folder AppleWorks.
Select and delete the two Cache files and the Preferences file.
Button Bars is also a preferences file, but may be left where it is IF you have no problems that appear related to the Button Bar, and wish to preserve any changes you've made to the Button Bar.
Regards,
Barry

Autodiscover not working correctly when Office 365 integrated with Server Essentials 2012 R2

Hello!
This last weekend I setup our server as new and to ease the creation of users, integrated with our Office 365 (which to this point has worked fine) and imported the users. This had a somewhat unexpected side effect in that the import used the email address
as for the user forename and then synced that change back to Office 365 and so needed to enter this information back in on the dashboard which synced back to Office 365. This may or may not have any relevance to our issue below.
I should also point out that we have our own domain name so within the original Office 365 setup we had just one .onmicrosoft.com user with all the rest setup with our own domain name.
At the weekend when it came to the client install, Outlook (2010 or 2013) would fail on the autodiscover with it asking again for credentials but critically displaying a server name of .contoso.com rather than the office365srvr.contoso.com . As I mention,
Office 365 had been operating fine for some time and DNS records where checked and have been set for sometime. I spoke to Office 365 support and after a while come up with a temporary solution (so that I could complete the client installs) of assigning each
user a onmicrosoft address, using that in the new account wizard to pick up the server correctly and then signing in the the Office 365 .contoso.com credentials.
This worked OK to get us past the weekend (although I am having to reset up profiles on quite number of users where they get disconnected but with no credentials box appearing) but isn't a solution. The clients do not see public folders or their archives
and of course we don't want to keep having to reset the profiles.
I'm think that there must be something in the internal network that needs reconfiguring but I don't know what. I have tried pointing the client to an external DNS server just in case the internal DNS server was throwing the autodiscover out but this has
made no difference.

Ah - solved my own problem.
Despite the domain DNS record looking OK and the Office 365 Portal domain checker not highlighting any issue, it looks as though the autodiscover is picking up an imap account provided by the web host.
I've added an alias on the local DNS server to point to the Office 365 autodiscover server and this has solved the problem.

Training and Event Management Integration with FICO

How Training & Event Management is integrated with FICO?
How it will be integrated and where?
Could you please put it in simple way?

Hi Rajesh,
Cost allocation:
Here it is possible to charge an employeeu2019s cost center with the fee for attending a business event (e.g. training course, workshop). The business event organizeru2019s cost center will be credited and the attendeeu2019s cost center will be debited.
Crediting of the senderu2019s cost center  Debiting of the recipientu2019s cost center
The costs incurred from actually holding a business event can be transferred from the resources cost center to the business event organizeru2019s cost.
Crediting of the senderu2019s cost center  Debiting of the recipientu2019s cost center
In SAP Configuration:
Training and Event Management > Integration->Billing and activity Allocation-->Activity Allocation and cost transfer posting.
Please do above configuration and create business events with or without resourses, in that you can maintain cost centre to post the expenditures .
Bhairavareddy

Why does my mac keyboard not work properly and is to do with the extra RAM?

Like someone else who has posted on this forum I have a problem with my Apple Pro Keyboard (usb, white, english) The keyboard has developed a fault which has resulted in the tab, caps lock and some other keys near them refusing to work. The caps lock light illuminates at startup but thats about it.
I've run various checks, reset my logic board, unplugged all the cables I can and still nothing. I recently installed two 512mb memory things boosting the machine's memory to 1.5gb. I have since done a full zero install (which was after the fault occured) but the problem persisted.
Is the memory the cause of this issue or is it time to get a new keyboard? I tried to run the apple hardware cd that came with the machine but it refuses to show up on the desktop and I cannot boot from it.
Any help would be very VERY much appreciated.
Also...is there any way of contacting apple with this? The contact us section pretty much just points back to the support site which doesnt have a solution.

nope that doesnt seem to be it. The caps lock light comes on at startup..so it seems it has the capability to work.
the keys which dont work seem to be:
caps
tab
escape
the squiggly thing next to left shift
and the key next to one
thanks for the suggestion though

Pagination not working when RDL report is integrated with MVC web application using ascx control reportviewer

I have the below code in my User control ASCX page.
<form id="form1" runat="server">
    <asp:ScriptManager runat="server"></asp:ScriptManager>
    <table>
<tr>
            <td>
                <rsweb:ReportViewer ID="rvDracas" runat="server" Height="100%" Width="100%" ProcessingMode="Local"
                    DocumentMapCollapsed="true" SizeToReportContent="True" PromptAreaCollapsed="True"
                    ShowCredentialPrompts="false" ShowBackButton="False" ShowPrintButton="true"
                    AsyncRendering="false" ShowFindControls="false" ToolBarItemBorderStyle="None" ShowToolBar="true"
                    ShowReportBody="True" ShowPromptAreaButton="True" ShowRefreshButton="True" ShowZoomControl="False"
                    ShowParameterPrompts="False" ViewStateMode="Enabled" OnLoad="rvDracas_Load" onclick="window.App.submitting
= true;" style="margin-bottom: 0px" OnPageNavigation="rvDracas_Load"  >
                </rsweb:ReportViewer>
            </td>
        </tr>
    </table>
</form>
In page load I am filling the RDL with the data source.
When I click on Page navigation control it is throwing me the below error.
"Unhandled exception at line 885, column 13
0x800a139e - JavaScript runtime error: Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed.
Please help...

Hello,
Welcome to MSDN forum.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because you are doing ASP.NET MVC app development, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cisco Telepresence and Meeting Place Integration with Third Party Call Pros

Dear colleages:
i want to ask if Cisco Telepresence can integrate with 3rd party call processing systems.
as my project has already existing Nortel Communication Server 1000,
which supports:
Operating System: VXWorks and Linux
Network Signaling Protocols: H.323v4, MCDN, SIP, LDAP, QSig, QSS, in band and DPNSS
Trunking Support:
IP:IP Virtual Trunks using IP Peer Networking over H.323 or SIP
Digital: DTI, ISDN-PRI, ISDN-BRI
Analog: Loop and Ground Start CO, FX, WATS, two or four wire E&M, four wire DX, DID, TIE, RAN Paging.
and i want to build Video Converence system over the WAN.
please to tell me if that integration is possible and what is the design components that is required for such project to be handled from A- to Z.
Regards,

I have been told that i need to use SIP protocol API instead of TAPI to have a TRUE VOIP Windows solution.
Could you guys please tell me the difference between SIP API and TAPI?
And could you please suggest a way which API (SPI or TAPI) the OnCast solution is based on (http://www.litescape.com/oncastsoftware.html) - we have to develop something similar.
Thank you for your replies,
Alexey

Not working USB and Bluetooth GPRS connection with LG KS360 Tribe

Hello, I just bought an LG KS360 Tribe and I can't use it to connect to the Internet. I also successfully use a Nokia phone with USB connection.
With the LG phone, when I click on "Connect", it tries to connect to the Internet for a few seconds, then the connection drops. on the phone I can see that 0KB of data have been transfered.
Bluetooth connection is the same. I use the Generic GPRS/3G driver.
Please help me with this one...
Thanks

Resolved! I've searched for similar problems with generic LG phones. This is what I found: http://www.taniwha.org.uk/
I've download the zip file http://www.taniwha.org.uk/files/Generic3G2007-02.zip
(just search for "Generic 3G Scripts" inside the page).
Then:
0. Unpack the zip
1. Copy the "Generic 3G *" scripts in "/Library/Modem Scripts"
2. Start the Network Manager
3. Connect the LG KS360 phone using the USB connector
4. Install the new device
5. Where you should put the phone number, write the APN address
6. In user I've inserted "none". Same thing in the password field.
7. Click on Advanced and select the driver "Other" and "Generic 3G CID1".
8. Click "OK", "Apply" and "Connect".
All works for me.

Is SPA8800 working without PSTN lines when integrated with BE3000 ?

Hi Guys,
I have a SPA8800 configured with static ip address 192.168.1.2/24 and BE3000 with ip address 192.168.1.250 in the same network. I would like to connect a fax machine to SPA8800's fxs port however there are no PSTN lines connected to FXO ports , will this fax machine work?
All the technical documents for spa8800 i can find online only tell you how to integrate SPA8800 with BE3000 with PSTN lines. thus, the connection type between BE3K and SPA8800 is "FXO". what if there are no PSTN lines available ? can the fax machine send or receive faxes via ISDN E1/T1 service on BE3K ?
if the answer is yes, where are the configuration document links ?

You can connect FAX machine to the FXS port of the SPA8800. There is no mandatory requirement to have FXO lines also connected to SPA8800. If you want to use E1-PRI line as PSTN connection for fax calls, that is fine as well.
One caveat is that fax-passthrough on E1 is supported.
Will review the admin guide to see if it requires update.
Thanks

How can I work offline and then re-synch with version control in SharePoint?

I am using RoboHelp 11 with SharePoint 2010 for version control. How can I work off-line and then re-synch my files with SharePoint when reconnected?
If I allow the connection to SharePoint to remain while working remotely through VPN, I am constantly annoyed by notices that "the underlying connection is lost."
Thanks!
Carol

Until/unless a solution is available here's my proposed work-around:
1.Check in all files from my primary project to SharePoint. (I have only one project.)
2. Duplicate the project that is linked to SharePoint. Name it "Off-Line Project" so that I am always aware of the project I'm working on. Don't link Off-Line Project to source control/SharePoint.
3. Before working off-line, import or overlay the latest version of all content (html) files from the SharePoint-linked project into Off-Line Project.
4. Work off-line using only Off-Line Project.
5. Returning to the office, get the latest version of all files from SharePoint. (eventually, I won't be the only person working on the project) import (or maybe just overlay using Windows Explorer?) the files I've worked on from Off-Line Project to the primary project.
Feedback? Suggestions?

Using attachments in work-flow and creating custom text with key values

Hi,
I have 2 simple requirements.
1. how to attach a tcode or trigger method of business object for work-flow item. The user should be able to navigate to transaction to see data before approval or rejection.
2. I have created custom task for long text that will be displayed in the SAP inbox. How do I provide key values in this long text. I was able to do in the subject line using Substitution parameters(&Name1& etc..)
Regards
Kasi

I did the same thing. see details.
Created Workitem and attached a task "TS92500097". in the task, I mentioned Business Object and method to be called. I have set the binding also for this business object. the method I am calling is nothing but just "display" which is using call transaction. 2 problems here.
1. How do I show this "BusinessObject.Display" as an attachment or link in the mail.
2. how do I assign key values during exection of this attachment or link.
Regards
Kasi
2.

Playback Not Working Choppy and Get Spin Wheel With Every Action

SOMEBODY PLEASE HELP ME!!!!
I have a MacBook Pro Running on Snow Leopard 10.6.5
Processor 2.4Hhz Core 2 Duo
4GB Ram
External Drive 1Tb-Brand New Files on it.
File Type Imported: .mov
When ever I try to playback it gets choppy, and Spin Wheel comes.
Whenever I click on anything im noticing the spin wheel appear.
I have been looking at various forums,,,trying everything.
Does anybody have the trick to get this thing to playback the clip smooth....
I used Final Cut Express on my MacBook, and I never had this problem ever.
Just upgraded to the MacBook Pro, and Final Cut Pro 7,,,and all types of issues.
Please is the answer out there?

jerseyjoey wrote:
H.264
1280X720
24FPS
44.1 Aud Rate
So what do I have to do from here?
I suck when it comes to technical if you can walk me through it.
Thanks
Joey
You'll need to transcode teh H.264 to a more stable and useful editing codec. It's in the manuals and we see several H.264 questions every day around here so it's pretty easy to research.
jerseyjoey wrote:
I used Final Cut Express on my MacBook, and I never had this problem ever.
Just upgraded to the MacBook Pro, and Final Cut Pro 7,,,and all types of issues.
<
I do not you were using H.264 on your your previous rig. Did you get yourself a new origination camera when you got your new Mac?
bogiesan

On tight integration with the shell (a pager and a browser)

I just hacked together a bunch of scripts that implement a pager and browser tightly integrated to the shell.
Slogan:
Monolithic programs prevent synergy. Tight integration with the shell promotes synergy, and is closer to the UNIX philosophy.
(Furthermore, it enables workflows that would otherwise require a mouse. It enhances accessability.)
Background:
Some time ago I stumbled upon the nmh and mh mail clients (implementation in mailutils). I was interested by the concept, and surprised that they are not more popular. (One big problem with them is the lack of modern mailbox support, lack of IMAP, and such.)
Anyway, they allow really tight integration with the shell. Another such application is taskwarrior [pkg].
Example:
Using taskwarrior and mh it is very easy to add a task description to an email. In the other direction, one can easily annotate a task with an email.
I realised git [pkg] is also such an app. To illustrate what I do not want: You do not use the command `git` to enter a monolith, that provides its own shell:
[user@host ~]$ git
git> add myfile
git> commit
git> push origin master
git> quit
[user@host ~]$
That would feel really stupid, right? Another program that illustrates what I mean is surfraw [pkg] (usually abbreviated to sr).
Ok, so far for background and illustration. On to my scripts.
My scripts
Warning: First of all, I want to stress that I am a bad programmer, my scripts are very fragile, and they provide a crude user experience. This is really just a proof of concept.
Consider the following scenario.
Scenario:
Suppose you are logged in to some server via ssh. No mouse, no X, no screen or tmux. You are writing an email, and want to quote some text from Wikipedia. What do you do?
I provide some scripts that give a crude browser and page tightly integrated with the shell. The pager p is akin to less (or more) but just dumps its output in the terminal. You use pd (page down) pu (page up) pj and pk (scroll 3 lines down/up) to navigate throught the output.
The browser b just runs a URL through elinks -dump and saves the output in a cache file. Typically, one would pipe the output of b through p. Further bl n follows link number n. Further bcur just prints the output of the cache file to the terminal (for example to pipe it through p if one had not done that yet).
The bundles of scripts are available at https://github.com/jcommelin/p and https://github.com/jcommelin/b .
Back to the scenario. With my scripts I can now do:
[user@host ~]$ sr wikipedia linux | p # sr the linux wiki page, pipe through p
[user@host ~]$ pd # page down
[user@host ~]$ pd
[user@host ~]$ pj 10 # scroll 10 lines down
[user@host ~]$ pcur | tail -12 >> email.txt # select last 12 lines of current paging, append to email
(I obviously did not print the output of the commands, as they would fill the entire screen.)
Ok, this post is long enough already. I would appreciate any feedback.
Other apps that take the `tight integration' approach.
A niche of apps still lacking such a program.
Feedback on my scripts (I don't mind converting stuff to C. It should become pretty robust in the end.)
FYI: I already plan on adding browsing history to b.

Please see your other post for an answer. Thank you.
Opening PDFs on iPad

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

Portal Integration with Discoverer

How can discoverer application and workbooks be integrated with Portal? Currently designing for Data Warehouse project with webbased front end using 9iAs, Discoverer +, Reports.

I have tried to do the thing you have described about hacking the disco_frame.htm code. But it will not work for me.
The discoverer will not start. If I starts it, it will not take the undocumented parameters. Do you have any sugestions ?
Lene
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Chris Whiteley ([email protected]):
Here is some info from an earlier conversation. Not sure how well the html code will come through.. email me if not .
Christopher
Even better than that you can get the properties of the URL (by right clicking -> Copy Shortcut) and then use that ANYWHERE in Portal not just under the External Apps Portlet. This also means that you can manage the External Application centrally and any url referencing it will be updated.
If you want to be really smart you can embed the Discoverer Plus inside and HTML Portlet. This means the full application/report can be viewed through a Portlet.
You need to basically hack the disco_frame.htm code and take out the following code:
<script src="http://webserver/disco4i/scripts/htmlvars.js"></script>
<script src="http://webserver/disco4i/scripts/browser.js"></script>
<script src="http://webserver/disco4i/scripts/webdisc.js"></script>
<script>
document.writeln('<applet codebase="http://webserver/disco4i/applet"');
document.writeln(' width="200"');
document.writeln(' height="180"');
document.writeln(' code = "oracle.disco.DiscoApplet.class"');
document.writeln(' align="left"');
document.writeln(' valign="TOP">');
document.writeln('<param name="namespace" value="OracleDiscoverer4i">');
document.writeln('<param name="useslibrary" value="Oracle Discoverer 4i">');
document.writeln('<param name="useslibrarycodebase" value="dis4uie.cab">');
document.writeln('<param name="useslibraryversion" value="'4,1,33'">');
document.writeln('<param name="org.omg.CORBA.ORBClass" value="com.visigenic.vbroker.orb.ORB">');
document.writeln('<param name="Session" value="'Disco4iOracleDiscovererSession4">');
document.writeln('<param name="Locator" value="'Disco4iOracleDiscovererLocator4">');
document.writeln('<param name="HELPDIR" value="help">');
var pName = new Array(0);
var pValue = new Array(0);
// override default FrameDisplayStyle=separate
if (doNotRedirect())
pName[0] = "FrameDisplayStyle";
pValue[0] = "";
constructParamTagsOverride(parent.location.search, false, pName, pValue);
document.writeln('</applet>');
</script>
There are some addtional document.writeln Parameters (NOT DOCUMENTED) that enable you to fire a workbook off automatically:
document.writeln('<param name="UserName" value="DSMS">');
document.writeln('<param name="Password" value="DSMS">');
document.writeln('<param name="Database" value="orcl.uk.oracle.com">');
document.writeln('<param name="WorkbookSource" value="Database">');
document.writeln('<param name="Workbook" value="Demand">');
The downside is that it will refresh each time you go to the page the portlet is in.
We have also found a way of using PLSQL to interogate the EUL4 tables and present the user with a list of workbooks that have access to based on what is shared
to them in the 'Sharing' Option. You can syncronise the Portal user and the Discoverer/Database user and hey presto, you have central managability...Almost. The
'almost' being the fact that we haven't found a way of passing the Portal password into the url to launch Discoverer.
<HR></BLOCKQUOTE>
null

EP5-work experience and Educational Qualifications integration with e Recru

Similar Messages

Maybe you are looking for