EP6.0  Learning Tutorials, URL’s and  Useful information

Hi
    I installed, uninstalled  and Reinstalled  SAP NW sp11 successfully
    I worked with sample application iview, page, workset, role
   Now I want to learn  EP from basics,
   i.e  packages, System objects, pdk, themes, webdynpros
   form where I can learn it
   Could u please send URL
Regards
Rakesh

HI,
Refer this thread
Re: EP fundamentals
All the information you have asked is in help.sap.com documentation.
you can refer the pilot link in SDN for video presentations
NETWEAVER
http://help.sap.com/saphelp_nw04/helpdata/en/30/c4461ff69d5a438f1286e344b545fa/frameset.htm
PORTAL
http://help.sap.com/saphelp_nw04/helpdata/en/a9/76bd3b57743b09e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/19/4554426dd13555e10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/4b0c105e-0501-0010-bcb0-92478a4b2a17
EP 6.0 Developer Tutorial Guide
Message was edited by: Kirupanand Venkatapathi

Similar Messages

  • Where can I learn how to setup and use the new features in Mountain Lion?

    Where can I learn how to setup and use the new features in Mountain Lion?

    MacWorld has a Superguide, TidBITS has Take Control books, and probably a flock of other publishers have physical books.

  • Spaces in URL's and using Netscape (TreeNodeDefinition.getDestination)

    Hi,
    I'm using the UIX tree element and use the JHeadstart
    classes PrepareTreeData (which I extend) and
    TreeNodeDefinition for constructing a tree.
    Problem: The destination contains an attribute of my
    viewObjects which contain spaces. This is not compatible
    with Netscape. IE converts the spaces to %20's and this
    works fine, but Netscape doesn't.
    More specific: part of the URL is:
    &targetCondition=details&SHORT_DESCRIPTION={1}
    where SHORT_DESCRIPTION is the name of the Attribute and
    {1} will be replaced with it's value. This value should
    NOT contain spaces, but instead have +'s or %20's.
    Where is the replacement of the {1} to it's value made
    and how can I then replace the spaces for +'s or %20's?

    Bram,
    Spaces.. gotta love 'm... :) A pragmatic solution might be to create a separate, transient attribute in the Model, to hold the same value as the attribute you are using now, but already properly 'escaped'.
    In case this is not an option, the actual replacement is done in method selectValue() in the TreeDataObject class. Look for the calls to (java.text.)MessageFormat.format().
    Peter Ebell
    JHeadstart Team

  • Auto Run ignores URL parameters and uses Defaults on first run

    We have BI Publisher 11g standalone (not OBIEE).
    We have a suite of BI Publisher reports, all set up on data sets with default parameters.
    All reports have Auto Run enabled and caching disabled.
    The reports are run from a Flex UI application using a URL i.e. URLVariables and URLRequest and navigateToURL.
    The required parameters for any report are read from BI Publisher using the web services, then the user makes their selections in our custom UI.
    We use:
                             urlVariables['_xpf'] = null;
                             urlVariables['_xpt'] = 0;
                             urlVariables['_xf'] = 'html';
                             urlVariables['_xmode'] = 1;
    The first time any user runs any report in the application the report is generated but with the default parameters NOT their selected values, and it displays the parameter controls when the settings as per above say it should NOT.
    Any report generation after that is fine - it runs with the user's nominated parameters values, and it does not display the parameter controls.
    Originally we thought it might be caching so along with all report caching settings being disabled, we introduced a parameter to force the uniqueness of each report URL i.e.
                             urlVariables['noCache'] = new Date().getTime();
    In Safari, if we Reset Safari then restart the app in the same browser window we can reproduce the problem.
    Any suggestions please?
    Thanks

    I'm not sure where the "Enable Document Cache" setting is?
    All reports have caching disabled - so for each report in its Report Properties, all items on the Caching tab are checked off.
    i.e.
    Enable Data Caching - off
    User Level - off
    Document Caching - off

  • Tutorials: Responsive Templates, and using Wordpress with Dreamweaver

    Hi all,
    Check out these following blog posts on the Dreamweaver blog.
    https://blogs.adobe.com/dreamweaver/2015/02/new-dreamweaver-cc-starter-templates-make-resp onsive-design-a-snap.html
    https://blogs.adobe.com/dreamweaver/2015/02/establishing-a-dreamweaver-cc-and-wordpress-wo rkflow.html
    Thanks,
    Preran

    You can use that extension if you like. You need to make sure that your page that has the SSI have an extension that will process the scripts as mentioned above.
    .shtml, .php
    I always name my SSI so I know that they are includes.
    header.inc.html
    header.inc.php
    header.inc.txt as examples.
    If you are using PHP, then it should process the includes.
    A good simple test is to add a SSI to a page.
    Do something simple like.
    <p>Welcome to our website</p>
    Name it welcome.inc.php
    Then include it in a page, upload it to the webserver and visit the page.
    I am using contribute for people to update areas of our website (hate it) and I manage the overall website myself.

  • Last year I would watch tutorials on my iPad and using my Apple TV view them on my tv. Since maverick I can't airdrop from my pad to my Apple TV ? I can't even watch purchased tutorials through my tv and would like to know if there was a way to get it bac

    Way can't i do this now? Last year I would turn into creativeLive and watch tutorials on my tv using my Apple TV screening from my iPad . This was great. And allowed me to move around while learning. After Maverick that service disappear, I went into the apple store where I lived and they thought it was creativeLive not brought casting. But I have tutorials I have purchased that should be able to screen aren't showing up either. As this is important to me was wondering if there's something I can do to get it back before I go blind trying to study on the pad? Any help would be appreciated I bought the Apple TV precisely for this purpose, any one know why they changed a very helpful service?

    Are it's amazing what going to the apple classes can do for you, lol the problem was air play has turned off no doubt when the upgrades were done, but thanks to the training apple gave me I was able to reason the problem out yah! I love my apple.

  • I have looked through the video tutorials for CS6 and cant find any help for PHP using SQL.

    Where is a good place that I can go to learn more about using dreamweaver and different languages than html.  Is there a service that adobe offers that I could buy that would take me from rookie all the way to professional with a good easy to use structure such as adobe tv but more advanced and thorough?  I am trying to build a website with a log in page and registration.  I have the HTML part down well enough but need help writing the php scripts and using SQL to store the user info

    I'm moving this to the main Dreamweaver support forum.
    In answer to your question, you need to be aware that the PHP server behaviors in Dreamweaver CS6 use the original MySQL functions that are scheduled to be removed from a future version of PHP. The server behaviors have already been removed from Dreamweaver CC. If you are planning to create a site using PHP and MySQL, do not rely on Dreamweaver's server behaviors. You must use either MySQLi (MySQL Improved) or PDO (PHP Data Objects) instead.
    If you're looking for video tutorials, you might be interested in the courses I have created for lynda.com. As a beginner, a good place to start would be PHP for Web Designers or Introducing PHP (there are several sample videos that you can watch for free on my website). Both courses were recorded on Dreamweaver (PHP for Web Designers on Dreamweaver CS6, Introducing PHP on Dreamweaver CS5.5). PHP for Web Designers shows how to connect to MySQL with MySQLi. You need a subscription to lynda.com to watch the complete courses, but you can get a seven-day free trial by following the links on my website.
    If you don't want to commit to a subscription service, I have also written a book called PHP Solutions, which covers MySQLi and PDO in depth. It also shows how to build a login system. At the moment, the second edition is available, but a revised third edition is due to go on sale in December.
    There are also a lot of free resources on the web that you can find. The important thing to beware of is that a lot of old material relies on the original MySQL functions. Whichever resource you use, make sure it shows how to use MySQLi or PDO.

  • How to get URL of a certain file and use it as an attribute value?

    Hello, I am using JDeveloper 11.1.2.3.0
    I want to get the URL of a file and use it as input of another attribute. I used inputFile but I can not get the URL directly from there. Do I have to build a managedBean? Can anyone help me with an idea on how to do this? If you could help me with a simple method it would be great.
    Thank you

    Hi,
    seems to need to step back for a moment and learn about how file input works if you don't know how to access the uploaded file. Please read
    http://tompeez.wordpress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-2/
    Frank

  • I am Unable to Type or use Keyboard in Firefox 18.0 anywhere including URL bar and Search Bar. how should rectify this?

    I am unable to type anything or use keyboard to type in Firefox. I am using Firefox 18.0 installed on Windows 7.
    I am able to Paste into the URL bar and also the Search bar but absolutely not able to type in it.
    I have already tried the "reset" option but still unable to type.
    Also tried Firefox in safe mode with disabled addons but still unable to type.
    Installed a fresh copy of firefox after uninstalling Firefox and deleting the old folder "Mozilla Firefox" from windows. but still unable to type.
    Please tell me a solution to this.

    I'm not on a laptop so I don't have a FN key. But on my desktop F9 + Windows key appears to have resolved the issue for me. Thanks for the help!

  • I have a POP Verizon e-mail address on my iMac and use Mac Mail v3.6. I recently purchased a MacBook Pro and would like to sync the e-mail so that they're the same on each machine. I've learned I must switch to IMAP...how is this done?

    I have a POP Verizon e-mail address on my iMac and use Mac Mail v3.6. I recently purchased a MacBook Pro and would like to sync the e-mail so that they're the same on each machine. I've learned I must switch to IMAP...how is this done? Please dumb it down as best you can. I have this great fear that I'll lose all my e-mails in the process.

    I have a POP Verizon e-mail address on my iMac and use Mac Mail v3.6. I recently purchased a MacBook Pro and would like to sync the e-mail so that they're the same on each machine. I've learned I must switch to IMAP...how is this done? Please dumb it down as best you can. I have this great fear that I'll lose all my e-mails in the process.

  • Hello, i am new to the mac and i need to learn how to re image using an external hard drive

    Hello, i am new, like baby fresh new,...lol, to the mac and i need to learn how to re-image using an external hard drive.

    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID  then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • Links to learn and use Oracle Auditing

    Hi All,
    I wanna featured links to learn and use Oracle DB Auditing
    I knew recently that auditing has two types: Manual and By Oracle right? I want that one by Oracle
    Is this the right forum for this thread?
    Thank u
    Note: I'm using Oracle DB 10g R2

    Dev. Musbah wrote:
    Hi All,
    I wanna featured links to learn and use Oracle DB Auditing
    I knew recently that auditing has two types: Manual and By Oracle right? I want that one by Oracle
    Is this the right forum for this thread?
    Thank u
    Note: I'm using Oracle DB 10g R2Find this link to use Oracle Auditing:
    http://download.oracle.com/docs/cd/B19306_01/network.102/b14266/cfgaudit.htm

  • If user disable cookie how to set and use session with URL Rewritting

    if user disable cookie how to set and use session with URL Rewritting by append session ID in url

    If cookies are disabled, then app server will automatically try to use URL rewriting for session control. Programmer's responsibility is to encode any links or redirects using
    response.encodeURL("/yourPage.jsp")
    and
    response.encodeRedirectURL("/yourPage.jsp")
    See API for details
    http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/http/HttpServletResponse.html#encodeURL(java.lang.String))

  • Opening a webpage using url.getConnection and populating?

    Hi
    I want to write a tool that opens a webpage given the URL and populates the page with provided information and clicks the button i.e. want a tool that automates this workflow.
    I understand I can tweak with url.getConnection and get the page populated but I am clueless about populating the page automatically with the data. Is there any way to do it?
    Thanks
    Raja

    Hi
    Thanks for your immediate knowledge sharing, ya right JSP can be accessed as it resides in the server also I understand the HTML coding is more than enough for me to understand the values I need to pass to given the input type of fields with the FORM tag.
    Having understood thus far, you people mention getting the HTML code but how do I get that programatically, it is that I can load the JSP/page using URL.getConnection and open the page in the browser, one way is doing VIEW SOURCE manually and getting the code, can you educate me on how to do it programatically to view source of the displaying page on a browser?
    Thanks
    Raja

  • It can't find URL when i use HLS for vod and the vod file name contain Chinese.

    It can't find URL when i use HLS for vod and the vod file name contain Chinese。eg： http://127.0.0.1:8134/hls-vod/你好.mp4.m3u8.
    How does it support Chinese path?

    To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
    Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

Maybe you are looking for