EP6 SP2 Metaframe XP
We are currently experiencing Mayor problems on our Metaframe servers. When users access the Portal the portal loads up correcly. But as soon as they navigate within the portal it just refreshes the page it started up with.
Are there any browser settings that we should apply? We are running EP6 SP2.
Metaframe is runnning Windows 2000 Server, browser version IE 6.0.2800.1106
Regards
Richard
HI, There.
Yes this problem has always been there since we moved to the metaframe environment.
However if we make any setting change on IE it works but as soon as you log off and log on again the same problem occurs. The portal works fine on all the other environment except the Metaframe XP environment.
Regards
Richard
Similar Messages
-
License in Failover/Backup Portal - Ep6 SP2
Hello,
We run EP6 SP2 and we copy the database and portal server file system to different hardware as a diaster recovery method. We we bring up the portal on this new server it loads fine, but it says that it is not licensed since the Hardware key is different.
Does anyone know if I can import a license on the current server with the hardware key of the DR Server so that it will be licensed when you start it?
Any ideas / suggestions?
Thanks,
KeithKeith,
Kindly check note 181543 (License key for high-availability environment).
Regards,
James -
Enhancements made in EP6 SP2 patches 28 & 29.
What are the enhancements made in EP6 SP2 patches 28 & 29.
What I mean to say is that what are the new features added in Patches 28 & 29. here I exclude Bug fixes.
I can go to the central note for patch 28 : 793582 and can get a list of notes which indicate bug fixes done in Patch 28
Similar way, I can go to the central note for patch 29 : 803871 and can get a list of notes which indicate bug fixes done in Patch 29
What I am really concerned is regarding new features added in these two patches (Patch 28 & 29) separately.
Are there any new features added in these two Patch releases. If yes, Where are they documented.
Are they documented separately or their respective guides are updated.
Your help is really appreciated.Hi Robert, hi Suneel,
> Patch 28 & 29 are not listed there yet.
Not quite right, Robert, I don't know what a dreadfully old version you have looked on... It is listed, but it is explicitely said that both patches, 28 & 29, have
"no new features or enhancements to existing functionality. It is cumulative as of Patch 5. Please refer to Patch 5 and Patch 27 documentation for information about previous enhancements."
The document is retrievable without access to service.sap.com: http://help.sap.com/download/documentation/netweaver/ep/FeaturesEP6SP2Patches_v2.5.pdf
It's a pity that SAP publishes the version name within the link, so if a new version exists, one has to know (or to look via service.sap.com).
Hope it helps
Detlev
PS: Suneel, please consider rewarding points for people like Robert Thanks in advance -
Integrate CRM 4.0 and EP6 SP2
Hi,
Can anyone let me know the steps to integrate CRM 4.0 with EP6 SP2 on windows 2003 server.
Thanks in advance,
regards,
PayalPayal,
There is excellant documentation available at SAP Help site on this. Here is the top level link for SSO
http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
and here is a link to most common scenario
http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8e7af2f11d5993700508b6b8b11/content.htm
Antoher thing it would be good to have access to BASIS skills while doing SSO to SAP Systems.
Cheers
Pankaj -
Repointing "Help" link to a different source in EP6 SP2
Hi all,
I am using EP6 SP2 Patch 4 HF 7. I need to re-point the "Help" link in the top of EP6 SP2 to an different source. Presently it is pointing to http://help.sap.com and since mine is an intranet portal..cannot point to that.
Any idea where do I have to change the link ?
Regards,
Rajan.KHi!
You can customize this link by editing:
Content Administration - Portal Content - Portal Content - Portal Users - Standart Portal Users - Default Framework Page.
In popup menu choose "Edit". Select "Masthead iView" and press "Edit" link. Then in "Property Category" choose "Navigation" and in "Help Link URL" enter link you preffer.
WBR, Lnk. -
Error in DB migration : EP6 SP2 NW SR1.
Hello All,
I am doing migration from EP6 SP2 > NW SR1.
While doing the DB migration on the Target server, I encountered the below error:
============================================================
1118066281203#INFO.- Reports button clicked at MainMigrationFrame
1118066281203#INFO.- SAP System Name is SR1
1118066281203#INFO.- using tool version 0409.0.20050405174947.0000/877
1118066281203#INFO.- using system installation at d:\usr\sap\SR1
1118066281218#INFO.- Processing migration info
1118066309031#INFO.- Processing migration info finished
1118066315531#INFO.- ETC Migration button clicked at MainMigrationFrame
1118066318062#INFO.- DBMigration button clicked at MainMigrationFrame
1118066327500#INFO.- starting db migration run ...
1118066327500#INFO.- jdbc driver: com.sap.portals.jdbc.sqlserver.SQLServerDriver
1118066327515#INFO.- jdbc driver url: jdbc:sap:sqlserver://10.34.137.16:1433;MaxPooledStatements=100;DatabaseName=WCM;SelectMethod=cursor;longDataCacheSize=524288
1118066327515#INFO.- using database schema 'WCM' on host '10.34.137.16' at port '1433' with user 'SAPWCM' as the database source
1118066343546#INFO.- retrieved drv name: SQLServer (version: 3.2.006922003414004423)
1118066343578#INFO.- MSSQL lock timeout adjusted
1118066343609#INFO.- src cur ver: SP2.CM.1
1118066343609#INFO.- src db version is SP2.CM.1 (17 patches newer than SP2CP.UWL.1)
1118066343609#INFO.- running EP6SP2 -> NW04 migration
1118066343625#INFO.- starting backup of configuration ...
1118066347203#ERROR.- null - ConfigException: error while exporting CMS configuration to folder [D:\MIgration\KMCMIGTOOL_5\migrationTool\.\work\export]
Inner exception is:
A problem occurred while exporting the configuration: java.lang.NullPointerException
stack:
error while exporting CMS configuration to folder [D:\MIgration\KMCMIGTOOL_5\migrationTool\.\work\export]
Inner Stack is:
java.lang.Exception: A problem occurred while exporting the configuration: java.lang.NullPointerException
at com.sap.netweaver.config.offlinetool.ConfigurationCmsTool.exportConfiguration(ConfigurationCmsTool.java:111)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.netweaver.bc.migration.ui.Migrator.backupCfg(Migrator.java:186)
at com.sap.netweaver.bc.migration.ui.Migrator.run(Migrator.java:414)
1118066347203#ERROR.- no valid configuration backup - rejecting db migration
=====================================================
Any help is highly appreciated.
Warm Regards
Suneel RazdanHello
I have resolved it !!!
That's usually caused by the database not containing a valid config framework tree. In all cases so far this happened as part of the user killing the java vm in a situation where one should have waited for the cancel button to return.
I restored the target database with the backup
taken before started the migration and rerun the tool on
the target. You can continue to use the MigrationInput.zip file.
Suneel -
Portal_logger from EP6 SP2
Hi,
I used to watch the logger called portal_logger in EP6 SP2, but with the new log viewer I cannot find the same view. What is it called in NW04 ?
BRGDS
HenrikHi,
Logging console is now under visual administrator. Login to visual admin and under the Server node > Services click
on Log Configurator. Here you can set all the log levels.
Cheers!! -
EP6 SP2 Jco / System Alias Question
Hi all,
I'm developing a number of Iviews on an EP6 SP2 system connected to a 4.6C box. I have two problems that I'd be grateful for some help with.
1) How do I make use of the System Aliases set up in the portal via Jco ?
I know I can use the direct connection
JCO.createClient("001", // SAP client
"<userid>", // userid
"****", // password
"EN", // language
"<hostname>", //
"00"); // system number
but it would be much easier if I could use the configured System Alias called "UKSAP" which has been set-up in each Portal box.
2) I believe that EP6 SP2 will not require connection pooling in the jco code. Is this correct ?
Cheers
RichardHi,
We are trying to do pretty much the same thing you are, I am trying to get my Java iview to use the System Alias to connect to an R/3 JCO destination.
Could you elaborate on your findings in this regard. I am currently getting the following error : "Target for system alias SAP_R3_HumanResources not found in system landscape"
I have entered the connection info for this target into the jcoDestinations.xml and I've created a system in the portal with the alias SAP_R3_HumanResources...
Thanks in advance,
Mukta Pathak -
Detailed Navigation on EP6 SP2 Patch27
I just installed EP6 SP2 Patch27.
The EP system was installed using CD 51030419 without CM. And I installed patch 5 (J2EE 25) and patch 27 (J2EE 27).
When I logged on the system and clicked the menu in the detailed navigation, the script error message like below appeared.
A runtime error has occured.
Do you wish to debug?
Line : 116
Error : 'onNewHistory' is undefined.
But, after this popup error message, all functions seems to work correctly.
Is there anybody has an idea to resolve this ?Hello Jay,
I know this meesage was posted a long time ago but I am encoutering the same problem with the latest patch for SP2. The user would like to view the Enterprise Portal on a MAC machine and everything seems to work except the detailed navigation part. I tried also on a windows machine with a Netscape/Firefox browser and same problem occurs.
Did you find a solution? I would greatly appreaciate your help.
Thanks in advance
Rabih -
Looking for evalution download of EP6 SP2 for linux
Is it possible to find a evaluation version of the SAP Portal EP6 SP2 for linux. To evalutate and check the installation procedure.
Under downloads -> Webas there is a 640 release of the webas for linux. Installing this is basically the same as installing the portal.
Paul -
Hi we are running EP6 SP2 on AIX 5.2 64bit and Oracle database - we are currently experiencing problems with an iview that times-out. The iview is under "User Administration" and we are trying to assign users to a Group. The number of users in this group is at the moment around 2200.
Thank youIn the content administration.
There is a setting on the page called Page Timeout.
Try setting this a bit higher.
Well a lot higher since it is in milliseconds.
Br Rasmus -
UWL configuration on EP6, SP2 (WebAS6.20)
Hi,
is ITS required for the UWL to operate on EP6 SP2?
Thanks,
SergePrakash, do you need an ITS for UWL on WebAS 6.40, SP9?
I got consultants who claim to install UWL on 6.40, SP9 without ITS...
Thank you,
Serge -
EP6 SP2 hardware key / installation number
Hi all,
unfortunately the license of an EP6 SP2 has expired and I need to find out what are the hardware key and the installation number of this portal in order to renew the license.
As the admin pwd is lost and the sap* user/pwd combination do not work in order to log on to the portal and retrieve the system information via the system admin tab I am wondering if I can find both (hardware key and inst. no.) in the database or on the filesystem. If yes, where??
Any input on this would be greatly appreciated :)!
Thanks alot in advance!
BR HelgaHi Helga,
One way to enable SAP* is
1. Copy your current sapum.properties.bak to sapum.properties (/usr/sap/XXX/j2ee/cluster/ume)
[ This would only work if this is the original sapum.properties when you initially installed.]
If you copy over the properties from the direct editing
(i.e sapum.properties is in sync with the properties in
the database )tab then set the following properties in the sapum.properties is set.
ume.superadmin.activated=true
2. Restart the server.
Side Effect: You have to redo the UM configuration
Now you can logon as SAP* and get the system information.
Alternative 1:( This may or may not work. I don't have access to the environment or documentation to check out.)
Through Visual Administrator see server license information.
To Access the Admin documentation by the following URL;
http://your portal server:50000/index.html
Hope this helps
Regards
-Venkat Malempati
Message was edited by: Venkat Malempati
Message was edited by: Venkat Malempati -
Hallo all,
I want to implement a Crawler for EP6 SP2 and found out in the Java docs that ICrawler is deprecated for EP6 SP2 and that XCrawler should be used. But I can't find any information (e.g. java docs or sample coding) for XCrawler replacing ICrawler. Neither do I find the necessary libraries for implementing a crawler.
Could someone please point me to the right place to look for libraries/docs/samples? Or does anyone know something about ICrawler / XCrawler implementation on EP6 SP2?
Thanks a lot for any input on this!
Best Regards
HelgaHi Helga,
with XCrawler, it seems that (I)XCrawlerService is meant. In fact, there is no XCrawler class provided with EP6 SP2.
For JavaDoc, see https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/javadocs/nw04 sp9/km/com/sapportals/wcm/service/xcrawler/ixcrawlerservice.html
Hope it helps
Detlev -
EP6 SP2 ICrawler (deprecated) - XCrawler java docs?
Hallo all,
I want to implement a Crawler for EP6 SP2 and found out in the Java docs that ICrawler is deprecated for EP6 SP2 and that XCrawler should be used. But I can't find any information (e.g. java docs or sample coding) for XCrawler replacing ICrawler. Neither do I find the necessary libraries for implementing a crawler.
Could someone please point me to the right place to look for libraries/docs/samples? Or does anyone know something about ICrawler / XCrawler implementation on EP6 SP2?
Thanks a lot for any input on this!
Best Regards
Helga
Message was edited by: Helga OrtiusSee /thread/41429 [original link is broken]
Maybe you are looking for
-
ITunes 11 wifi sync will not recognize my iPad 2 and iPhone 4 running iOS 6
Since I upgraded to iTunes 11, iTunes no longer recognizes my iPad 2 and iPhone 4 (both running iOS 6.0.1) as active devices for the purposes of wifi sync. It does, however, recognize my iPad 1 running iOS 5. The only way I can sync my iPad 2 or iP
-
Try the url below in both Firefox and MSIE. You will see that the words "Toll Free:", in red at the top center, are followed by a phone number in MSIE but not in Firefox Firefox3.6.8.
-
Hi all, I have a requirement regarding data processing in a internal table, internal table consists of filelds Vendor,Material and Scheduling Dates and Total Qty. Here i need to fill the field Total Quantity, individual addition of quanties of that m
-
How do I get Bookmarks Toolbar to open when Firefox opens without having to click to open it?
When I open FIrefox I want the Bookmarks Toolbar to be there by default without having to click to open it. It is very frustrating having to add it each time I open Firefox. Help! Thanks.
-
How can I find out what is using all our home data?
We have a huge amount of data every month but over the past few months we are cracking thru it like crazy. I want to know what is using it all. We have changed passwords to ensure it wasn't outside this house.