EP6 SP2 Patch 4: Default Framework for innerpage corrupt

Hi,
we just installed Patch 4 and Hotfix 5 in a cluster environment on Unix. Everything went (almost) fine (eg. the SAPInst installer started the portal as user root which produced some error after our restart, but we could fix that).
The only "interesting" problem we had was, that the default framework for the portal (which is needed for the innerpage) was corrupt (or at least if we open this framework in the portal we can see only the narrow section of the framework -- and not the "narrow - wide" layout as it should be; the effect was, that all content of the innerpage was displayed in a very small area).
This was no real problem for us since we were already using a modified layout, but it still would be interesting to know if anybody else experienced this kind of behavior and perhaps knows a fix for that. I looked through the OSS notes, but couldn't find anything.
Best regards,
Holger.

Did you find a resolution for this behavior?
Michael

Similar Messages

Universal Worklist for EP6 SP2 Patch 4

Dear All,
How to configure the UWL for EP6 SP2 Patch 4?
Regards,
Samir

Did you find a resolution for this behavior?
Michael

Enhancements made in EP6 SP2 patches 28 & 29.

What are the enhancements made in EP6 SP2 patches 28 & 29.
What I mean to say is that what are the new features added in Patches 28 & 29. here I exclude Bug fixes.
I can go to the central note for patch 28 : 793582 and can get a list of notes which indicate bug fixes done in Patch 28
Similar way, I can go to the central note for patch 29 : 803871 and can get a list of notes which indicate bug fixes done in Patch 29
What I am really concerned is regarding new features added in these two patches (Patch 28 & 29) separately.
Are there any new features added in these two Patch releases. If yes, Where are they documented.
Are they documented separately or their respective guides are updated.
Your help is really appreciated.

Hi Robert, hi Suneel,
> Patch 28 & 29 are not listed there yet.
Not quite right, Robert, I don't know what a dreadfully old version you have looked on... It is listed, but it is explicitely said that both patches, 28 & 29, have
"no new features or enhancements to existing functionality. It is cumulative as of Patch 5. Please refer to Patch 5 and Patch 27 documentation for information about previous enhancements."
The document is retrievable without access to service.sap.com: http://help.sap.com/download/documentation/netweaver/ep/FeaturesEP6SP2Patches_v2.5.pdf
It's a pity that SAP publishes the version name within the link, so if a new version exists, one has to know (or to look via service.sap.com).
Hope it helps
Detlev
PS: Suneel, please consider rewarding points for people like Robert Thanks in advance

My Photo on EP6 SP2 Patch Level 31

We have recently being doing some patching and have struck and unexpected problem. Under the Personal Information Workset and Location iView you can attach a picture of yourself. Previously we were able to delete that picture but after pacthing we have lost the delete option and now can only replace it. Is this deliberate or has something gone wrong during our upgrade?
Anybody have any ideas?
Message was edited by: Luke Collier

Hi ranger,
1. You need SAP Note 722890 to solve the Symptom: "SAPinst or process started by SAPinst terminates abnormally", so it's not needed when everything works fine!
2. You should log in as a user with super user (root) permission as stated in the installation guide. <b>But: only use root during the installation for runing sapinst. Afterwards su to j2eeadm and start the portal!</b>
3. The J2EE Engine should be running, but the IRJ application must be stopped!
Hope this helps,
Robert
PS: If you face problems as mentioned in 1., I can provide you with the SAP Note (by mail).

EP6 sp2: Editing authschemes.xml file for Client Certificates - Urgent

Urgent Help Needed..
I am trying to modify the authschemes.xml file so that i can have Client Certificate Authentication. Has anyone done this before? I am unable to get client certificate authentication working. I also need to get rid of form based logon screen?
Please help.
regards
anton

Hi detlev,
I followed all the instructions i can find but nothing explains what exactly i need to implment to request client certificates in the xml file.
I want portal to request the client cert as soon as they hit the portal webpage. I am also going through IIS6 with iisproxy module installed.
I am using verisign certificates, i configured J2ee engine to request the root cert for the client cert for the SSL port but that does not work. I get the dialog box requesting in IE asking me to choose a cert but i can make any selection its greyed out. After i say yes it connects to me to the portal logon screen.
Here is the authscheme that i am using.
<authschemes>
        
        <authscheme name="uidpwdlogon">
            
            <loginmodule>
                <loginModuleName>com.sap.security.core.logon.imp.CertLoginModule</loginModuleName>
                <controlFlag>SUFFICIENT</controlFlag>
                <options></options>
            </loginmodule>
            <loginmodule>
                <loginModuleName>com.sap.security.core.logon.imp.DefaultLoginModule</loginModuleName>
                
                <controlFlag>REQUISITE</controlFlag>
                <options></options>
            </loginmodule>
            <priority>21</priority>
            
            <frontendtype>2</frontendtype>
            
            <frontendtarget>com.sap.portal.runtime.logon.default</frontendtarget>
        </authscheme>

Repointing "Help" link to a different source in EP6 SP2

Hi all,
I am using EP6 SP2 Patch 4 HF 7. I need to re-point the "Help" link in the top of EP6 SP2 to an different source. Presently it is pointing to http://help.sap.com and since mine is an intranet portal..cannot point to that.
Any idea where do I have to change the link ?
Regards,
Rajan.K

Hi!
You can customize this link by editing:
Content Administration - Portal Content - Portal Content - Portal Users - Standart Portal Users - Default Framework Page.
In popup menu choose "Edit". Select "Masthead iView" and press "Edit" link. Then in "Property Category" choose "Navigation" and in "Help Link URL" enter link you preffer.
WBR, Lnk.

Default framework page not opening

Hi Forum,
I am trying to login in portal with super admin role but after authentication I am getting this error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/every_user/general/com.sap.portal.frameworkpage/com.sap.portal.toolAreaiView
Component Name : com.sap.portal.navigation.toolarea.default
com/sap/ip/basecomps/consistency/ConsistencyDomain$Lockable.
Exception id: 03:11_14/03/07_0057_14617650
See the details for the exception ID in the log file
It seems that the default framework page is corrupted.
Can u pls suggest how should I proceed to recover thr portal framework page?
Any help is welcomed!
Regards,
Mickey.

Hi Mickey,
did you see this <a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=2844054">thread</a>?
Best regards,
Martin

EP6 SP2 ICrawler XCrawler

Hallo all,
I want to implement a Crawler for EP6 SP2 and found out in the Java docs that ICrawler is deprecated for EP6 SP2 and that XCrawler should be used. But I can't find any information (e.g. java docs or sample coding) for XCrawler replacing ICrawler. Neither do I find the necessary libraries for implementing a crawler.
Could someone please point me to the right place to look for libraries/docs/samples? Or does anyone know something about ICrawler / XCrawler implementation on EP6 SP2?
Thanks a lot for any input on this!
Best Regards
Helga

Hi Helga,
with XCrawler, it seems that (I)XCrawlerService is meant. In fact, there is no XCrawler class provided with EP6 SP2.
For JavaDoc, see https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/javadocs/nw04 sp9/km/com/sapportals/wcm/service/xcrawler/ixcrawlerservice.html
Hope it helps
Detlev

EP6 SP2 ICrawler (deprecated) - XCrawler java docs?

Hallo all,
I want to implement a Crawler for EP6 SP2 and found out in the Java docs that ICrawler is deprecated for EP6 SP2 and that XCrawler should be used. But I can't find any information (e.g. java docs or sample coding) for XCrawler replacing ICrawler. Neither do I find the necessary libraries for implementing a crawler.
Could someone please point me to the right place to look for libraries/docs/samples? Or does anyone know something about ICrawler / XCrawler implementation on EP6 SP2?
Thanks a lot for any input on this!
Best Regards
Helga
Message was edited by: Helga Ortius

See /thread/41429 [original link is broken]

Webdynpro and EP6 SP2

Hi
Can you use webdynpro applications with EP6 SP2 Patch 27 and above. This is running on J2EE 6.20
Thanks
Darrell

Hi,
It depends on what are you mean by "running"
You can take WAS 6.40 ,deploy WD app on it, define this WAS 6.40 server on your EP6 SP2 SLD and then make an WD iView in you portal which will consume WD application from WAS 6.40. This means that all "buisness logic" would be performed on WAS 6.40 and you portal will only "view" the application. However you can use portal APIs (like Client Side Eventing) in this scenario.
On the other side you don't have a WD runtime on WAS 6.20, so you can't deploy WD application on WAS 6.20
Hope it hepls.
Victor.

Looking for evalution download of EP6 SP2 for linux

Is it possible to find a evaluation version of the SAP Portal EP6 SP2 for linux. To evalutate and check the installation procedure.

Under downloads -> Webas there is a 640 release of the webas for linux. Installing this is basically the same as installing the portal.
Paul

Is AutoClassification for Taxonomies in EP6 SP2 fully functional?

Hello Again,
I've implemented a query-based taxonomy in EP6 with auto classification. I've created 11 taxonomies in total all under 1 index. But the functionality seems to be inconsistent and/or non-functional.
After creating the index I follow this process to create each Taxonomy:
1) (Index Admin) New Taxonomy. (query-based w/ autoclassification)
2) (taxonomy explorer) Add sub-folders to the taxonomy (new folder)
3) (Tax Query Builder) Define the queries for each folder
4) (Tax Query Builder) Click Update
5) (Index Admin) ReIndex the Index or Data Source
When I do one test taxonomy with one subfolder things normally work as planned, the couple of test files get assigned to the test folders. But when I try to do the full implementation of 11 taxonomies, 40 total folders, and roughly 1000 documents to classify. None of the files autoclassify. All the files can be seen in the Index, but during the classification process I get many of these errors: [ Indexing document failed. taxonomy not found (Errorcode 2422) ]
1)Is there another step that I'm missing?
2)What does Taxonomy Syncronization do?
3)What does the datasource incremental update do?
4)Are there any known bugs in EP6 SP2 taxonomies?
Thanks, DAN

Update:
After lots of trial and error in this area I've finally found a suitable sequence of events.
OLD WAY (Didn't work) :
1) (Index Admin) New Taxonomy. (query-based w/ autoclassification)
2) (taxonomy explorer) Add sub-folders to the taxonomy (new folder)
3) (Tax Query Builder) Define the queries for each folder
4) (Tax Query Builder) Click Update
5) (Index Admin) ReIndex the Index or Data Source
NEW WAY: (Reindex moved to step 3, Save & Update queries afer any document update)
1) (Index Admin) New Taxonomy. (query-based w/ autoclassification)
2) (taxonomy explorer) Add sub-folders to the taxonomy (new folder)
3) (Index Admin) ReIndex the Index at the root index level
4) (Tax Query Builder) Define the queries for each folder
5) (Tax Query Builder) Click update for each taxonomy when complete
6) (Inbox) verify that documents classified correctly
If new KM documents or folders are added
1) (Index Admin - Data Source) Incrementally update the datasource at the datasource level
2) (Tax Query Builder) Touch the Taxonomy by selecting 1 query per each Taxonomy and clicking save
3) (Tax Query Builder) Click update for each taxonomy - monitor the app log to make sure the update completes before running the next.
Notes:
*Don't upload KM files with the same name to same dir.
*Be very careful removing/changing KM folder names.
*Changes to the files removes the classification.
FYI: I still find the implementation of taxonomies in EP6 SP2 beta, but with enough trial and error suitable work-around's can be found.

How to enable desktop innerpage in Default framework from the disabled EP

Hi,
By mistake I have disabled the desktop inner page in default framework - ep7.0. Now I am not able to see anything below the toplevel menu. I want to enable that again and i don't know how to do that. Because nothing is coming inside the screen after clinking the portal contant. That mean disabled. Is there any other way to get back that?
I don't know how to do that.
Thanks,
V P

Hi,
After getting into the portal i have entered the below url and changed back to the original.
http://server:port/irj/servlet/prt/portal/prteventname/Navigate/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fevery_user!2fgeneral!2fcom.sap.portal.frameworkpage
Thanks,
VP

Error in DB migration : EP6 SP2 NW SR1.

Hello All,
I am doing migration from EP6 SP2 > NW SR1.
While doing the DB migration on the Target server, I encountered the below error:
============================================================
1118066281203#INFO.- Reports button clicked at MainMigrationFrame
1118066281203#INFO.- SAP System Name is SR1
1118066281203#INFO.- using tool version 0409.0.20050405174947.0000/877
1118066281203#INFO.- using system installation at d:\usr\sap\SR1
1118066281218#INFO.- Processing migration info
1118066309031#INFO.- Processing migration info finished
1118066315531#INFO.- ETC Migration button clicked at MainMigrationFrame
1118066318062#INFO.- DBMigration button clicked at MainMigrationFrame
1118066327500#INFO.- starting db migration run ...
1118066327500#INFO.- jdbc driver: com.sap.portals.jdbc.sqlserver.SQLServerDriver
1118066327515#INFO.- jdbc driver url: jdbc:sap:sqlserver://10.34.137.16:1433;MaxPooledStatements=100;DatabaseName=WCM;SelectMethod=cursor;longDataCacheSize=524288
1118066327515#INFO.- using database schema 'WCM' on host '10.34.137.16' at port '1433' with user 'SAPWCM' as the database source
1118066343546#INFO.- retrieved drv name: SQLServer (version: 3.2.006922003414004423)
1118066343578#INFO.- MSSQL lock timeout adjusted
1118066343609#INFO.- src cur ver: SP2.CM.1
1118066343609#INFO.- src db version is SP2.CM.1 (17 patches newer than SP2CP.UWL.1)
1118066343609#INFO.- running EP6SP2 -> NW04 migration
1118066343625#INFO.- starting backup of configuration ...
1118066347203#ERROR.- null - ConfigException: error while exporting CMS configuration to folder [D:\MIgration\KMCMIGTOOL_5\migrationTool\.\work\export]
     Inner exception is:
     A problem occurred while exporting the configuration: java.lang.NullPointerException
stack:
     error while exporting CMS configuration to folder [D:\MIgration\KMCMIGTOOL_5\migrationTool\.\work\export]
     Inner Stack is:
     java.lang.Exception: A problem occurred while exporting the configuration: java.lang.NullPointerException
          at com.sap.netweaver.config.offlinetool.ConfigurationCmsTool.exportConfiguration(ConfigurationCmsTool.java:111)
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:324)
          at com.sap.netweaver.bc.migration.ui.Migrator.backupCfg(Migrator.java:186)
          at com.sap.netweaver.bc.migration.ui.Migrator.run(Migrator.java:414)
1118066347203#ERROR.- no valid configuration backup - rejecting db migration
=====================================================
Any help is highly appreciated.
Warm Regards
Suneel Razdan

Hello
I have resolved it !!!
That's usually caused by the database not containing a valid config framework tree. In all cases so far this happened as part of the user killing the java vm in a situation where one should have waited for the cancel button to return.
I restored the target database with the backup
taken before started the migration and rerun the tool on
the target. You can continue to use the MigrationInput.zip file.
Suneel

Detailed Navigation on EP6 SP2 Patch27

I just installed EP6 SP2 Patch27.
The EP system was installed using CD 51030419 without CM. And I installed patch 5 (J2EE 25) and patch 27 (J2EE 27).
When I logged on the system and clicked the menu in the detailed navigation, the script error message like below appeared.
A runtime error has occured.
Do you wish to debug?
Line : 116
Error : 'onNewHistory' is undefined.
But, after this popup error message, all functions seems to work correctly.
Is there anybody has an idea to resolve this ?

Hello Jay,
I know this meesage was posted a long time ago but I am encoutering the same problem with the latest patch for SP2. The user would like to view the Enterprise Portal on a MAC machine and everything seems to work except the detailed navigation part. I tried also on a windows machine with a Netscape/Firefox browser and same problem occurs.
Did you find a solution? I would greatly appreaciate your help.
Thanks in advance
Rabih

EP6 SP2 Patch 4: Default Framework for innerpage corrupt

Similar Messages

Maybe you are looking for