EP6 SR1 Install - DVD Information

Hi,
We are doing a fresh EP 6.0 on WAS6.40 Support Release1 (SR1) installation. We have installed MSSQL 2000 Enterprise Edition successfully.
We are trying to download the SR1 DVD's from the Service market place. Can anyone help us identify the correct DVD's for the installation.
Thanks in advance,
-Mayur

For WAS you need
Master Install dvd material # ends 843
Java DVD  material # ends 724
For Portal
Master Install DVD  material # ends 843
Netweaver Components DVD material # ends 723
For KMC
... same as portal.
This is assuming a non unicode install.
Hope this helps.

Similar Messages

  • EP6 SR1 Install Fails.

    Hi All,
    I have  BW3.5, WAS ( J2EE SP9)and  Oracle 9.2.0.4.0 on a single W2K Platform.  This was upgraded from an older NW installation. All SAP and Java components are at SP9.As per SAP this is now at SR1. J2SE is @ build 1.4.2_07-b05
    I am now attempting to install EP6 SR1 onto the above system using the DVD.
    It fails just after I enter the J2EE_ADMIN user id.
    the sapinst log has the following message
    "A call to the analyzer failed with the following error ". But java.log has only the list of files referenced by The analyzer.
    As you can see I am a newbie, so any help is appreciated.
    Kiran

    No. I did not have a previos version of EP, Just BW3.1.
    But I have made some progress. Please see below.
    I have by-passed the analyzer ( sapinst PRE_ANALYZE=OFF) and was able continue until the 'Start J2EE Engine'. I get the error as described in
    790767. Besides the above,I still have 2 more stages to go,ie, 'Check Portal status & 'Post processing".
    Can I still apply 790767 saftely ?
    Below is the text for 790767
    Symptom
    Patch installation for EP6.0 Stack09 failed
    Other terms
    Upgrade SP9 Portal Patch
    Reason and Prerequisites
    Installation of a patch of EP NW04 Stack 9 ends with error message
    Solution
    When running the patch installer for EP of NW NW04 Stack 9, on the last
    step, you will get an error message saying: "An error occured while
    processing service SAP Enterprise Portal 6.0 Patch Installation"
    In the Log you will see:
    FJS-00003  TypeError: fMgr.getNode(j2eePath + "/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/deployment/pcdcontent" ) has no properties (in script InstallationScript_79, line 17433: ???)
    Since this occur in the last step of the patch installer, after the deployed all the files, you can ignore this message by stopping the SAPInst in the message box.
    For Patch #1:
    Note that the portal version number will still display 6.0.9.0.0, and
    will not reflect the fact that SP9 Patch1 was successfully installed.
    This version number can be found in a "Portal version" iView, under
    System administration -> Support -> Support Desk.

  • Deploy vid SDM/J2EE hanged while Installing NW04 EP6 SR1

    Hi,
    I am installing NW04 EP6 SR1 installation on Windows 2003
    After starting SAPInst the installation hangs at Deploy vid SDM/J2EE
    at the log shows: PHASE 2006-11-15 17:07:39
    Deploying SDAs (using SDM and SAP Java EE Engine).
    But not going further from this stage, I tried restarting the Installation and even the J2EE and whole system too and no luck.
    Please help me out to over come this issue, I have checked the SAPinst.log and is as followsL
    NFO 2006-11-15 17:07:35
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO 2006-11-15 17:07:35
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO 2006-11-15 17:07:37
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html.
    INFO 2006-11-15 17:07:37
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html.
    INFO 2006-11-15 17:07:37
    Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\summary.2.html.
    PHASE 2006-11-15 17:07:37
    Prepare the installation program.
    INFO 2006-11-15 17:07:38
    Installation start: Wednesday, 15 November 2006, 17:07:32; installation directory: C:\Program Files\sapinst_instdir\NW04\EP\EP; product to be installed: SAP NetWeaver '04 SR1> NetWeaver Components Running on Java> Portal Platform> Portal Installation
    INFO 2006-11-15 17:07:39
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html.
    INFO 2006-11-15 17:07:39
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html.
    INFO 2006-11-15 17:07:39
    Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\summary.3.html.
    PHASE 2006-11-15 17:07:39
    Deploying SDAs (using SDM and SAP Java EE Engine).
    SAPinst_dev.log********* has the following error and I just found it
    Current access token
    ====================
    Could not get thread token. Last error: 1008. I assume that no thread token exists.
    Got process token.
    Privileges:
      Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
      Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
      Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
      Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
      Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
      Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
      Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
      Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
      Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
      Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
      Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
      Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
      Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
      Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
      Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
      Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
      Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
      Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
      Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
      Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
      Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
      Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
    Groups:
    Group count: 11
      \LOCAL S-1-2-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      BUILTIN\Administrators S-1-5-32-544 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_OWNER
      \Everyone S-1-1-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      BUILTIN\Users S-1-5-32-545 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      WATEST\Domain Users S-1-5-21-1442379584-1386351650-2746699151-513 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\INTERACTIVE S-1-5-4 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      VMTST050\ORA_DBA S-1-5-21-632969146-1124751804-835223308-1011 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\Authenticated Users S-1-5-11 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\REMOTE INTERACTIVE LOGON S-1-5-14 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      \ S-1-5-5-0-2480400 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_LOGON_ID
      NT AUTHORITY\This Organization S-1-5-15 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
    TRACE      [syxxsyshlp.cpp:185]
               syslib::logSystemState()
    System information
    ==================
    OS version, host name: Microsoft Windows NT [Version 5.2.3790 Service Pack 1] VMTST050
    RAM size (MB): 3583.45
    Swap size (MB): 10687.5
    Please help me out to over come this if any one had idea on this.
    Regards
    Narsimha

    Hi Daniel,
    I am very much thankful for your kind reply. I have to check this with the network team. I just posted whole contents of SAPinst_dev.log file can you please have a quick look so that you may have your valuable suggestions for me to over come the issue:
    Regards
    Narsimha
    TRACE      [sapinst.cpp:285]
               CSapInst::initMessaging()
    Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:344]
               CControlFile::getMessageFilePath()
    Running with messages from C:/Program Files/sapinst_instdir/NW04/EP/EP
    TRACE      [sapinst.cpp:306]
               CSapInst::initMessaging()
    This is SAPinst, version 642, build 851600
    compiled on Aug 24 2006, 03:01:15
    TRACE      [sapinst.cpp:311]
               CSapInst::initMessaging()
    Gui connected by user svc_netwvr_inst from host vmtst050
    TRACE      [syxxsyshlp.cpp:175]
               syslib::logSystemState()
    Process environment
    ===================
    Environment Variables
    =====================
       = C:=C:\Program Files\sapinst_instdir\NW04\EP\EP
       = E:=E:\software\MASTERCD\IM_WINDOWS_I386\SAPINST\NT\I386
      ALLUSERSPROFILE = C:\Documents and Settings\All Users
      APPDATA = C:\Documents and Settings\svc_netwvr_inst\Application Data
      CLIENTNAME = WS10345
      ClusterLog = C:\WINNT\Cluster\cluster.log
      CommonProgramFiles = C:\Program Files\Common Files
      COMPUTERNAME = VMTST050
      ComSpec = C:\WINNT\system32\cmd.exe
      FP_NO_HOST_CHECK = NO
      HOMEDRIVE = C:
      HOMEPATH = \Documents and Settings\svc_netwvr_inst
      JAVA_HOME = C:\j2sdk1.4.2_13
      LOGONSERVER =
    VMTST001
      NUMBER_OF_PROCESSORS = 1
      OS = Windows_NT
      Path = E:\oracle\ora92\jre\1.4.2\bin\client;E:\oracle\ora92\jre\1.4.2\bin;E:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\j2sdk1.4.2_13\bin
      PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
      PROCESSOR_ARCHITECTURE = x86
      PROCESSOR_IDENTIFIER = x86 Family 15 Model 4 Stepping 8, GenuineIntel
      PROCESSOR_LEVEL = 15
      PROCESSOR_REVISION = 0408
      ProgramFiles = C:\Program Files
      SAINST_JRE_HOME = C:\j2sdk1.4.2_13\jre\bin
      SAPINST_EXEDIR_CD = E:/software/MASTERCD/IM_WINDOWS_I386/SAPINST/NT/I386
      SESSIONNAME = RDP-Tcp#3
      SystemDrive = C:
      SystemRoot = C:\WINNT
      TEMP = C:\Temp\1
      TMP = C:\Temp\1
      USERDNSDOMAIN = WATEST.WCORP.COM.AU
      USERDOMAIN = WATEST
      USERNAME = svc_netwvr_inst
      USERPROFILE = C:\Documents and Settings\svc_netwvr_inst
      windir = C:\WINNT
    User: WATEST\svc_netwvr_inst, Id: S-1-5-21-1442379584-1386351650-2746699151-39577
    Working directory: C:\Program Files\sapinst_instdir\NW04\EP\EP
    Current access token
    ====================
    Could not get thread token. Last error: 1008. I assume that no thread token exists.
    Got process token.
    Privileges:
      Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
      Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
      Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
      Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
      Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
      Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
      Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
      Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
      Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
      Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
      Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
      Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
      Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
      Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
      Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
      Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
      Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
      Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
      Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
      Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
      Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
      Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
    Groups:
    Group count: 11
      \LOCAL S-1-2-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      BUILTIN\Administrators S-1-5-32-544 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_OWNER
      \Everyone S-1-1-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      BUILTIN\Users S-1-5-32-545 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      WATEST\Domain Users S-1-5-21-1442379584-1386351650-2746699151-513 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\INTERACTIVE S-1-5-4 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      VMTST050\ORA_DBA S-1-5-21-632969146-1124751804-835223308-1011 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\Authenticated Users S-1-5-11 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\REMOTE INTERACTIVE LOGON S-1-5-14 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      \ S-1-5-5-0-2480400 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_LOGON_ID
      NT AUTHORITY\This Organization S-1-5-15 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
    TRACE      [syxxsyshlp.cpp:185]
               syslib::logSystemState()
    System information
    ==================
    OS version, host name: Microsoft Windows NT [Version 5.2.3790 Service Pack 1] VMTST050
    RAM size (MB): 3583.45
    Swap size (MB): 10687.5
    TRACE      [iaxxclientacceptor.cpp:124]
               CClientAcceptor::acceptImpl()
    Running with control file E:/software/MASTERCD/IM_WINDOWS_I386/SAPINST/NT/I386/PATCOL640/WEBAS630/IND/control.xml version 642 and changelist 15172
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:142]
               CControlFile::getKeydbControlFileName()
    Running with keydb file keydb.xml
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:235]
               CControlFile::getDialogControlFileName()
    Running with dialog control file dialog.xml
    TRACE      [iaxxccontrolfile.cpp:184]
               CControlFile::getResourecFileName()
    Running with resource file C:/Program Files/sapinst_instdir/NW04/EP/EP/helppool.xml
    INFO       2006-11-15 17:07:35 [syxxcfile.cpp:402]
               CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO       2006-11-15 17:07:35 [syxxcfile.cpp:523]
               CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
    TRACE      [iaxxclib.cpp:165]
               load()
    Opened iaccdlib.dll
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE      [iaxxclib.cpp:165]
               load()
    Opened iamodos.dll
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    INFO       2006-11-15 17:07:37 [syxxcfile.cpp:402]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html.
    INFO       2006-11-15 17:07:37 [syxxcfile.cpp:523]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html.
    INFO       2006-11-15 17:07:37 [synxcpath.cpp:834]
               CSyPath::createFile()
    Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\summary.2.html.
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    PHASE      2006-11-15 17:07:37 [iaxxcwalker.cpp:416]
               CDomWalker::printPhaseInfo()
    Prepare the installation program.
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    INFO       2006-11-15 17:07:38 [iaxxcwalker.cpp:59]
               CDomWalker::walk()
    Installation start: Wednesday, 15 November 2006, 17:07:32; installation directory: C:\Program Files\sapinst_instdir\NW04\EP\EP; product to be installed: SAP NetWeaver '04 SR1> NetWeaver Components Running on Java> Portal Platform> Portal Installation
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component EP_DQE_DB_CONTENT|ind|ind|ind|EP60|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component EP_DQE_SERVICE|ind|ind|ind|EP60|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component EP_DQE_EAR_INSTALLATION|ind|ind|ind|EP60|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component startStopGenericWithoutDialogs|ind|ind|ind|ind|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component startStopGenericWithoutDialogs2|ind|ind|ind|ind|ind; available: 1; required: 0
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component EP_INSTALL_CM|ind|ind|ind|ind|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component startStopGenericWithoutDialogs|ind|ind|ind|ind|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component DEPLOY_CM_PAR_FILES|ind|ind|ind|ind|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component EP_INSTALL_***|ind|ind|ind|EP60|ind; available: 1; required: 0
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    INFO       2006-11-15 17:07:39 [syxxcfile.cpp:402]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html.
    INFO       2006-11-15 17:07:39 [syxxcfile.cpp:523]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html.
    INFO       2006-11-15 17:07:39 [synxcpath.cpp:834]
               CSyPath::createFile()
    Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\summary.3.html.
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    PHASE      2006-11-15 17:07:39 [iaxxcwalker.cpp:416]
               CDomWalker::printPhaseInfo()
    Deploying SDAs (using SDM and SAP Java EE Engine).
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    INFO       2006-11-15 17:07:39 [syxxcfile.cpp:402]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.2.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.2.xml.
    INFO       2006-11-15 17:07:39 [syxxcfile.cpp:523]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.2.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.2.xml.
    INFO       2006-11-15 17:07:39 [synxcpath.cpp:834]
               CSyPath::createFile()
    Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\keydb.2.xml.
    TRACE      [iaxxcwalker.cpp:296]
               CDomWalker::processStep()
    Executing installation step EP_PORTAL_MAIN|ind|ind|ind|EP60|ind|0|EP60|ind|ind|ind|EP60|ind|0|EP_MAIN_SP3|ind|ind|ind|EP60|ind|0|EP_ADAPT_PRT|ind|ind|ind|EP60|ind|0|EP_SET_UME_PROPERTIES|ind|ind|ind|ind|ind|0|updateJ2eeEngineSysProps
    TRACE      [iaxxejsexp.cpp:208]
               EJS_Installer::writeTraceToLogBook()
    EP_SET_UME_PROPERTIES:
          - getCD EP60 = E:/software/netweaver/EP-KMC/PORTAL
          - SDM_HOME = E:\usr\sap/J2E/JC00/SDM
          - j2ee = E:\usr\sap/J2E/JC00/SDM/../j2ee
          - configtoolPath = E:\usr\sap/J2E/JC00/SDM/../j2ee/configtool
          - xml_target = E:\usr\sap/J2E/JC00/SDM/../j2ee/configtool/ume_config.xml
          - xml_source = E:/software/netweaver/EP-KMC\TOOLS/TEMPLATES/ume_config.xml
          - configPropertiesFile = E:\usr\sap/J2E/JC00/SDM/../j2ee/configtool/config.properties

  • My Leopard install DVD is getting caught in a loop

    I'm having a problem with my Leopard install DVD. I'm running Leopard 10.5.7, and I wanted to use Disk Utility, so I inserted the intall DVD, double clicked the icon, and pressed enter to restart using the disk.
    What happened next was the computer restarted, gave me the chime, went to a gray screen with no apple logo or spinning gear, then restarted and looped this same sequence repeatedly. I've checked the surface of the install DVD and it seems undamaged, so my only conclusion is that something software related is happening. Anyone else run into this?
    The install DVD is version 10.5.1.

    Okay, so I used Disk Utility on the internal drive to verify and then repair permissions (long list). Then I attempted to verify the disk and got a message saying Disk First Aid Failed and the following info in the history: Verifying volume “Macintosh HD”
    Performing live verification.
    Checking Journaled HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume information.
    Invalid volume file count
    (It should be 956726 instead of 956732)
    Invalid volume directory count
    (It should be 233009 instead of 233003)
    The volume Macintosh HD needs to be repaired.
    Error: Filesystem verify or repair failed.
    After that, I put the install disk in and restarted holding the shift key. Got the gray screen for a long time (DVD seemed to be doing something), and then the computer restarted. This time I held down the option key, got the Startup Manager and selected the install disk. And away we went with the gray screen loop again. I let it try to restart from the install disk 6 times before holding down the eject button and ejecting the install disk which allowed the 'puter to boot from from the internal drive.
    And that's where I stand.

  • Password reset from Install DVD does not work

    PowerBook G4 17"
    Mac OSX 10.4.10
    After a system failure, I got the gray screen with the question mark. I restarted from an external drive, and, from "Disk Utility" I ran both "disk repair" and "permissions repair" to the internal drive. There were several errors, but all were repaired. When I restarted from the internal drive I was asked for a user id and a password. I entered them, but were refused. Then, I followed the steps indicated in "Mac OS X: Changing or resetting an account password" in this forum: I started from the install DVD, changed the password, and restarted, but the system refuses my user and password, (the window shakes and blanks out the password field). I have repeated all the steps several times, but the system keeps refusing my login. When I start from the external drive I can see all my documents, files, folders, image, etc, in the internal disk.
    I will appreciate any sugestions in order to solve this problem. Thanks a lot.

    Hi, glad to know that your LaCie HD is OK. now if you follow the instructions for Silverkeeper, you will find that it will give you an option to copy your LaCie HD clone to your Mac's internal drive. I don't have Silverkeeper, so any info. I give is from the link I gave to you earlier.
    This part in particular ..
    Drag the volume icon for the drive you have started from to the Source field of SilverKeeper.
    Drag the volume icon for the drive your wish to clone to, to the Destination field.
    "Save SilverKeeper settings.
    Click Go, and wait until completion.
    When Backup is complete, quit SilverKeeper.
    Restart your Mac; don't press any keys; you should restart to your normal, original startup drive; if >there is a login prompt, login to account that has Admin privileges
    Open System Preferences - select Startup Drive control preference.
    Select the backup drive as the startup drive.
    Restart your Mac; you should then startup just as if you had started up from the original, but it >should be your backup drive. You should not be prompted for any OS X registration.
    Please review the release notes for SilverKeeper at the support website:
    http://www.silverkeeper.com or http://www.lacie.com/silverkeeper which will reveal the most >current information."
    When you have done this you will have an exact copy of your LaCie HD on your computer. Nothing else needs to be done after this - you just use your Mac!
    Best wishes,
    Robert.

  • My Mail program has gone south on Leopard on my 27-month old Macbook. I can't send, even though the server details are correct. I tried reinstalling from the install DVD - but no go: no longer compatible, evidently.. What to do?

    My Mail program has gone south on Leopard on my 27-month old Macbook. I can't send, even though the server details are correct. I tried reinstalling the Mail program from the install DVD, but no go; apparently that two-year old Mail is no longer compatible with my up-to-date Leopard. I tried deleting the account (hotmail) from Mail and setting up a different account (Yahoo). After loading all the inbox two things happened: first, I still couldn't send, and second, when I closed the Mail window the whole inbox then disappeared and doesn't come back. Although I couldn't reinstall the Mail program from the install DVD, would it still be possible to reinstall the whole system from that DVD? If I do, will I lose files or will there be another problem since that DVD is now over two years old?
    Thanks for any suggestions; they will be much appreciated.
    P.S. I've just noticed that now I can't change the desktop picture: I go through the motions in Preferences, but the new picture doesn't appear on the desktop. Is there a systemic problem?

    You are waiting for an apology to something that happened over a year ago? Really? This is why there is a manager in the store. You have a problem with an employee you speak to the manager. Just like you did on the phone. You would have gotten your apology in July 2013.
    Here is the information about your upgrade fee.
    Upgrade Fee
    It is because when you have a problem you (customers) go running to the store and want to take up the time of the reps to fix it. Other carriers have third parties that deal with technical support and those locations are few and far between. VZW provides this directly through their stores. Also, when you subsidize a $650 and pay $200 VZW has to pay $400. Your monthly service fee doesn't begin to scratch the surface of paying that back. Not with all the money that is put into the network and its improvements.
    Then over a year later you get someone on the phone who apologized and offered to waive the fee on your phone and you didn't take it? That offer won't come down the pike again.
    One thing you should know is that all these employees are people and as such they sometimes come off cross. I doubt that you speak to everyone so sweetly all the time. Cut them a little slack and put this whole thing behind you after 15 months. Either upgrade with VZW or move on.

  • Cannot boot using Original OS X Install DVD

    Hi. I have some disk issues that I need to repair on my MB's internal hard drive, but first I need to boot from the original OS X Install DVD, so that the internal disk remains unmounted and I can use the Disk Utility from the DVD. I put the DVD in, and reboot the machine holding option. I select the DVD to boot from, and then everything spins for about a minute before a grey screen comes up, and a multi-lingual message informs me that I need to restart my computer. After doing so (requires booting from the internal HDD), I am prompted to send the error up to Apple which I do.
    I don't have firewire, so I can't do a Target Mode, the original DVD (I believe is 10.6.3) is not bootable anymore, and I can't make an 8GB USB key restore from the DVD for some reason.
    What is going on? How am I supposed to fix the disk issues?
    System Version: Mac OS X 10.6.5 (10H574)
    Kernel Version: Darwin 10.5.0
    Boot Volume: iHard
    Boot Mode: Normal
    Secure Virtual Memory: Enabled
    64-bit Kernel and Extensions: No
    Time since boot: 3:16
    Model Name: MacBook
    Model Identifier: MacBook7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 3 MB
    Memory: 4 GB
    Bus Speed: 1.07 GHz
    Boot ROM Version: MB71.0039.B0B
    SMC Version (system): 1.60f5
    Sudden Motion Sensor:
    State: Enabled

    Thank you... I stopped just short of running fsck myself from single user mode, basically because a some discussions.appple.com posts told me it was not a good idea under any circumstances to run fsck instead of disk utility on versions of OS X after 10.5.something. Of course, once I got to the Genius Bar, that was the first thing he did after hearing the symptoms. I asked him why he thought that was discouraged, and he said that there was no harm in it, unless you don't know what you are doing. Anyways, in the middle of fsck, while he was saying we probably were going to just have to do a software refresh, we got an I/O error from the disk. They have now installed a new hard drive, and so far everything is ok.
    Two things remain unresolved to me:
    1) I was able to select the original OS X install DVD to boot from, and yet, as it tried to boot from the disk, it would eventually draw down a vertical scan of the boot screen, and say (in several languages), that my computer had a problem and needed to be restarted. What I don't get is, if the hard disk is the only thing at fault, why can't I boot entirely from the DVD? Wouldn't a default bootloader be on the DVD itself? Or is that just the pure Linux world that does it that way?
    2) I am still concerned that I might not have the "right" install DVD for my computer. I bought a macbook 29 days before the 7,2 (mid 2010) versions came out, and the Apple store was gracious enough to give me the newer model in exchange for mine. The only trick is, I didn't have the box, accessories, or dvds with me at the time, and the salesman said there was no difference, and he would just keep the box for the new one and I shouldn't have any issues. I cannot figure out anyway to determine what the build version is for the DVD I have. Can you help me figure that out?
    Thanks again for your help.

  • Cannot eject OS X 10.4.3 Mac Install DVD

    I ran Pacifist to reinstall an application and now can't eject the Mac 10.4.3 Install DVD. It's not just this disk, I had a problem yesterday with the disk that came with Airport Extreme. These are both legal disks.........Apple disks. I'm running 10.4.7.
    I've tried everything.............several times each; holding the mouse at startup, every terminal command I've found in Discussions; Apple firmware commands; disk utility, iTunes, all the steps in Mac Help.....you name it. Nothing works. I tried rebooting from my external HD but it won't let me. Seems confused, even though I selected it in Preferences as Startup (perhaps because an OS Install disk is involved?): a window opens that starts to load OS, then my regular login window appears but it won't accept my login and password...so, I have to return to starting up from my HD.
    The disk would seem to be jammed but it still works......I can open it and the files on it.
    Is there a release or eject button on the Optical Drive inside that will release it?

    You're Very Welcome Dedo!
    I'm happy I could lead you to the documentation, that helped you correct your problem.
    Also, I notice that you have marked your question as answered, but have not utilized the Helpful or Solved options. That may be intentional, but, if you are not aware of the benefits of using that function, here is some information.
    When you mark the appropriate posts as Helpful (5 pts) 2 available, or Solved (10 pts) 1 available, you are Thanking the contributors, by awarding them points.
    In threads with multiple replies, it also alerts other readers, to which answers may have been helpful, or solved the issue.
    This info, and more, can be viewed by clicking on
    ? Help & Terms of Use, located under your login name, on all "Discussions" pages.
    Specifically What are question answers?.
    And Antonio, You're Very Welcome As Well!
    ali b

  • Have macbook pro early 2011, blank hard drive (new), no install DVD, inadequate internet connection. How do I install an OS in the thing ?

    Have macbook pro 15" early 2011, blank hard drive (new), Install DVD not available and an inadequate internet connection.
    How do I install an OS in the thing ?
    Can I purchase an installation disk? (I think it originally shipped with snow leopard 10.6.6)
    My first time with Macs and I would love to get it going.
    Thanks....

    You can purchase replacement discs from Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes
    international calling numbers.
    You can upgrade the firmware to enable Network Restore: Computers that can be upgraded to use OS X Internet Recovery. After upgrading you can do the following:
    Install OS X Using Internet Recovery
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Installing DVDs seem not OK

    Dear,
    In a previous post I asked for your support to install OSX on a firewire external hard disk (to be used as "emergency" and backup disk) from the Install DVDs supplied with my brand new MBP 15". Your information was of great help regarding partitioning etc. And the istaller now recognizes the external HD. However my problems is still not solved. The OSX installer does everything perfectly up to a certain point, which is always different and then kind of freezes. If I then click or touch a key, the "beachball" appears and I have to "hard shut down" the MBP.
    I assume something is wrong with the DVDs. What can I do?
    Thanks

    Sure can, If the external drive is USB2 compatible it will be just as fast as firewire (i believe even faster than firewire 400)
    Apps like DasBoot can even turn an USB memory stick into a bootable drive, you can find it here:
    http://www.apple.com/downloads/macosx/systemdiskutilities/dasboot.html

  • Bad Install DVD

    My Leopard Install DVD is bad and I cannot install from the disk. I tried cleaning the DVD media to no avail. Is it possible to get a replacement?

    There are no Apple stores in South Korea, so I guess my option is to try and call Apple support?
    I'm not sure how many localized versions there are of the documentation that comes with the Leopard package, but yours should include some information about your support options. And as I said, contacting the place of purchase may be of some help with this.

  • Re-installing DVD Pro

    I need to re-install DVD Pro.
    What is the best way? Do I drag the current application and all support folders to the trash? Or is there an Uninstall feature that I have missed?
    Any help is appreciated.
    Thanks,
    SC

    Steve:
    No, there is no an uninstall application.Check this Apple doc about DVDSP Troubleshooting:
    http://docs.info.apple.com/article.html?artnum=302641
    You'll find some information about re-installing the software.
    Hope that helps !
      Alberto

  • Starting from the install dvd

    I am would like to reset the admin and the password. Help says to start from the install dvd. I put it in held the c key untill the gray apple came on. The drive starts like it is going to start, then stops and the zero with the slash comes on and all stops. This an IMac G5 running 10.4.10, using the 10.4 dvd.
    Thanks

    Make sure the Install DVD is the one that *originally came w/your computer*, not scratched, dirty or smudged.
    The Install DVD does take awhile to complete. Just keep holding down the "c" key until it takes.
    Which "model" & generation G5 iMac do you have?
    Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
    http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer

  • Missing snow leopard install dvd

    I want to donate my 2006 iMac but am missing the OSX install DVD.  Is there any way to erase all data, including my personal identity information, without the DVD?

    A donation that would require buying replacement DVDs, what a gift.
    You could start the iMac in Target disk mode, then connect it to another Mac via Firewire, and then erase the drive using Disk Utility.
    Then you could donate the non bootable iMac to some lucky recipient.

  • Missing install DVD for Mac OS X Tiger 10.4.1 Server version

    Have a client that has a Mac X server that is not booting - stalls at start screen but won't boot to desktop. Problem is they cannot locate their install DVD. How hooped are they? Not on site yet, so haven't tried some of the other boot options, but will in next day. I do have OS X 10.4 Tiger on a laptop, but not the server version, so not sure if using the install disk from that will do anything. Appreciate any direction given this minor information as a starting point.

    Excellent news!! Much appreciated.
    Have worked in IT tech since '86 and find that, compared to other sources, the most helpful and knowledgeable resource is right here on the Apple Discussions forum.

Maybe you are looking for

  • DMS - locked status / how to limit security access

    I have a couple issues with a security profile (customer service) we have defined for DMS.   This profile is set up that when the document info record is in a "released" status, the customer service person has edit (CV02N) access.  When in an "on hol

  • Can I use Automator to set up a link in TextEdit as some kind of hotkey?

    I am a fan-o-textedit, but I wish I could get to some of the options in the menus a little easier. Going to to Text, and than to Link--there appears to be no hot key for this operation. Does anyone know how I can go about setting up my own hot keys f

  • F secure help for n8

    the commands to lock remotely dont work. If you have tested it what did you send your phone? I text #lock#<pw> and it didnt work.

  • Extracting data from different tables

    HI can some one help me to extract the data from: NATION field from ADRC table + Company code (BURKS) field from LFA1. I am using SQVI (query), but not succeeded. Please help me..... Thanks NIlesh

  • E-commerce 5 & existing sites

    Hi, Just a quick few questions about E-commerce 5 (for those who have already been involved in B2C installations). 1. Is this basically ISA 4 with a new UI layer or has the underlying frameworks changed as well? 2. Performance better or worse compare