EP6 Transaction iView Shortcut... need a little help from my friends

Hi All,
I've noticed an issue regarding Workplace compatibility mode when launching SAPGUI for Windows from a Transaction iView. By default Workplace compatibility is set to "true", however, we need this to be "false".
If I save the shortcut file generated by the portal and open in a text editor I can see this:
[Configuration]
Workplace=true
If I change this on my desktop to "false" and start SAPGUI it works as expected.
Anyone have any ideas how to set this property from the portal?
A fix is described for EP5 in SAP Note # 631555 but I'm finding nothing on EP6.
Help is always greatly appreciated!!
-Adam

Hi Adam,
Request your inputs please.
There is a portal iview having link to connect R/3 system (EP 6 to R/3 4.6C). When the user clicks the link in the iview, before the R/3 system opens, it gives a error saying
<b>"Not all data for SAP GUI shortcut is available. System ID is unknown, Client is unknown, Enter the missing data"</b>If I click OK, a new window opens saying <b>"New SAPGUI shortcut</b>"
In that window it is asking for descrption, SID, SAPGUI parameter, etc...
I checked the SAP system created in the portal and all the parameters including the Application host, port, system aliases, etc are fine and I can open the SAP window from the support desk.
In the iview also I checked all the settings are absolutely fine.
The GUI type is WINGUI and the How to Start SAPGUI for windows I have given SSF only.
Still I am not sure what is missing. If I change the SSF to auto the transaction opens in a new browser.
The issue is this..... EP 6.0, created a System for Dev R/3 (4.6C) and given all the required information for all possible property category like SAP client, SID, system #, port, etc, etc. system type is SAP_R3. User management, Logon method is SAPLOGONTICKETS and user mapping type is "admin, user".
No ITS information is given since we only open the session_manager of R/3 thru the iView.
This opens the R/3 most of the times. But sometimes the user gets the error.
If I use auto instead of SSF the SAP transaction is opening within the iview portal window itself. But earlier it used to open as a typical separate SAP R/3 window.
So I also changed the Drag&relate option to open in a new portal window. Now it is opening in a new window, but unlike the earlier one, the SAP windows is inside a browser window. So the create new session button and all are not active. Moreover the client is cruel enough and very particular to say they want it to open as an individual SAP R/3 window and not inside a browser.
I tried to follow note 631555, but as per that I am not able to find the SAPApplication.Transaction iveiw.
The error does not occur always and in all the systems. Thanks in advance for any help.
Regards,
P. Kumaravel.

Similar Messages

Need a little help from my friends

I have received 4 WS-C2948G L2 Switches for aproject I have been assigned to. The project is extremely thin, so I need to configure these switches by myself. When I was given the switches all I was told was the Switch Software had been cleaned off for security when I start the switch I see the switch boot from the console, but am lost from here (I have never worked with switches before). I have downloaded the 5.5(20) bin software image, but need a pointer or some help understanding a little about loading the software and interacting with the switch. While I get the console up, I can not tell that I can communicate with the switch at all. Any help would be appreciated, even if it is just a pointer to the correct publication to get me started. I have added 2 screen shots of boot if this helps. Ctrl C does not seem to stop the boot.
Thanks jt

If the switches do have a secure password configured - use the below procedure to recover the password and gain access to the cli:-
http://www.cisco.com/en/US/products/hw/switches/ps672/products_password_recovery09186a0080093e1e.shtml
Once in the switch read the below initial setup/config guide:-
http://www.cisco.com/en/US/products/hw/switches/ps606/products_configuration_guide_chapter09186a008007d102.html
HTH>

My drive recently had to be replaced with a new one installed by Apple they reinstalled all my stuff from my time machine. Most my programs had to be updated which I managed with a little help from my friends, but the last one that I can't solve is

My IMAC OSX 10.6.8 2.8 GHz intelcore 2Duo 4GB 800 Mhz DDR2 SDRam recently had to have its hard drive replaced by apple thy actually had to give me a larger one because mine was no longer available,They also reinstalled all my programs and data from my 2 terrabite time machine back up. I got my system home and found that I had to upgrade most of my programs which I managed with a little help from my friends, but I still have one problem that I can't solve I have a Nikon Coolpix S6 that I have Been Syncing with my Iphoto since I've got it 3 years ago and now when I place it in the cradle the program reconizes it and says that it is going to start to import the new photos the little white wheel in the center of the screen starts spinning but nothing else happens. I checked all my connections and they are goog plus I even downloaded a nikon progam just to double check the camera & cradle and it works there but it wont pair off with my IPhoto.

First go to iPhoto Preferences, look in both General and Advanced tabs to make sure that things are set to import from camera into iPhoto.
Then if that doesn't help, connect the camera and open Image Capture in your Applications > Utilities folder and see if you can use Image Capture to reset the import path from the camera to iPhoto.
Image Capture: Free import tool on Mac OS X - Macgasm
Message was edited by: den.thed
Sorry John, I didn't see your post when I clicked the reply button. Dennis

Sorry but I need a little help from yours...(vivo function on FX 5600)

Hi everybody, I've decided to post here in order to get some advices (maybe some of the moderators are not going to agree with me) from some of you (wonkanoby, Osnavi, Stu online, among others...) that I have the certainty that you could help me out here.
So here it's the message posted in the VGA MSI cards forum, but I didn't received any answers... And I'm so sorry for doing this but I don't see any other option, I really appreciate your advices, so here it's:
"Hi, I'm trying to use the VIVO function on a MSI Geforce FX 5600 but without any good result. I've installed the last WDM driver and also the lates Nvidia drivers, also the Info executable for Intel Chipset (inf, AGP), the motherboard can't asign an IRQ to the AGP (possible solution suggested by Nvidia itself to reponse to: "code 10 the device can't start"), I don't know if this mobo it's not compatible with this function or with this vid card. I'm pretty shure that I can't capture any video files without having the need of using any third part software (adobe premiere, capture solution, tv-christ, among others) and please advice me if I'm wrong, (I've tried MSI media Center deluxe without any success). The error code that the device manager shows is this(on nvidia WDM video Capture): Error code 10, the device can´t start.
Any ideas are welcome.
Here are the specs:
Pentium 4 HT 2.8 mhz 800 fsb
Intel 865gbf
DDR sdram 512 pc 3200 x 2
MSI Geforce FX 5600 128vtd VIVO
Driver 6.6.8.1
Driver WDM 2.2.0.0
Toshiba 80gb 7200rpm sata port
Audigy Gamer
Fax modem Conexant
4 Fan coolers
PSU 400 watts"

There may be an IRQ issue that the Intel crowd may be better suited to help with. You may have a device IRQ conflict, I've had this happen before and you have to look at your IRQ's for starters and look at slot population. The Creative card may be in a shared slot further complicating the issue or perhaps even the drivers are conflicting.
I suggest you tell us what slots are populated and post your IRQ's.
Go to Start>AllPrograms>Accessories>System Information~>Hardware Resources>IRQ's (Use the Edit menu to select all and copy, then post your IRQ's like this:
IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 5   WinFast TV2000 XP WDM Audio Capture   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 11   NVIDIA nForce PCI System Management   OK
IRQ 12   PS/2 Compatible Mouse   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
IRQ 16   RADEON X800 XT Platinum Edition   OK
IRQ 17   WinFast TV2000 XP WDM Video Capture   OK
IRQ 18   Creative SB Audigy 2 ZS (WDM)   OK
IRQ 19   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 20   Standard Enhanced PCI to USB Host Controller   OK
IRQ 21   NVIDIA Network Bus Enumerator   OK
IRQ 22   Standard OpenHCD USB Host Controller   OK
IRQ 23   Standard OpenHCD USB Host Controller   OK

My Apple album discovery widget does not function correctly and I needed a little help from an expert

Hi,
I can't get my official iTunes album discovery widget from Apple.com to play audio on my website. If you hit view, it will take you to the iTunes page, which is very good, but if you press play on my website where I have the widget displayed, the buttons for play and stop move and seem to function, but no audio. I contacted Apple app software, but they said they are not responsible for their own widgets and to contact the Apple Support Community. I even put major label acts into the widget and they did not work either and I am thinking this could be a widget that just never worked correctly in the first place. I think it just needs a tweak to fix it in the code, but I can't figure anymore out.
http://widgets.itunes.apple.com/builder/ this is the link to get to Apple's widgets for itunes
this is my link on the website: http://www.woodshampoo.net/ just scroll down on the music page to check it out
Thanks,
missingsock

Hey missingrock,
Hope u get round to following this up. I had the same problem and got a quick response from sending message via phg console. They told me to install QuickTime Player and it worked fine for me. That is if your country has an iTunes Music Store.
Good Luck

I need a little help from you experts...

I'm a young programmer with a simple question hopefully someone in here can help me out quick...
I'm designing a game on an applet that I do not intend on putting on any webpage. In the game I am tryin to add an image to use. The code that I am using works because I've seen it work before. However, I am having problems with the security stuff. The images are protected and I can't seem to bypass the security to get my images. How can I make it so there will be no compile-time error with loading the images from my own computer?? Thanks.

Hi.
If you don't intend putting it on a web page then why write an applet? Applications run without security restrictions so that would seem a better solution.
Basic info regarding signing a JAR file can be found here:
http://forum.java.sun.com/thread.jsp?forum=421&thread=530200
In the past when I want an applet to access an image I've used:
          try {
               context = getAppletContext();
               fileSource = "jar:" + getCodeBase() +
                    "classes/MoLogo.jar!/uk/co/channele/mologo/";
               i_turtle = getImage(new URL(fileSource + "turtle.png"));
               i_cat = getImage(new URL(fileSource + "cat.png"));
               icon_help = new ImageIcon(new URL(fileSource + "helpicon.png"));
          catch ( NullPointerException npex ) {
               // called from the command line
          catch (MalformedURLException mfurlex) {
               System.out.println(mfurlex);
          }When writing a Java applications I have used:
          Toolkit awTk = Toolkit.getDefaultToolkit();
         i_turtle = awTk.getImage("turtle.png");
         i_cat = awTk.getImage("cat.png");In these snippets i_turtle and i_cat are ImageS and icon_help is an ImageIcon.
Hope this helps
sjl

A little help from my friends...??

Could someone please help me find the simplest way to use my Canon Legria HF G10 with my Macbook Pro's FinalCut Pro v6.0??

Watch Shane Ross's tutorial on the tapeles workflow: http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1
It should work for Ver. 6

I get by with a little help from my friends...

Sorry I was listening to the Beatles when I was trying to think of a subject line.
Forgive me if this is an easy answer, I'm not a huge itunes user.
I just purchased some Rolling Stones on itunes plus, paid the 1.29. Yada, yada yada... Well later in the day I wanted to make one of the songs a ringtone and noticed it was locked and couldn't.
What am I doing wrong? I've done this before with itunes plus music...
Any Help out there is greatly appreciated...
Cullen

This is taken from the iTunes store terms of sale (which you agreed to).
*"(viii) You may not use Products as a musical "ringer" in connection with phone calls."*

Need a little help new to mac

Need a little help I'm new to Mac.. i have had my ibook for over a year now and i like it a lot, but some times my usb post dies on my for a couple days maybe weeks. Ill have my ipod connected and when i go to plug in a flash drive. It doesn't detect my ipod anymore and my usb port don't work. it says that they were "removed improperly" and now they are not working again..i have tried to reinstall the whole os again and that doesn't work i don't have the hardware test disk so i don't know what could be the problem i know its not the logic board is there any test i can do to it to find out the problem its an ibook late 2001... there is no reset button on it. i tried to hold in the space bar and now when i boot up i get prompt to this screen that shows the world and then a folder with a ? mark but then after a few sec it boots right up im a mess need some help

+it says that they were "removed improperly"+
You have to go to the iPod's icon on your computer (or the flash drive's icon), select it and eject it there before removing it. Otherwise, data can be corrupted and/or lost. Repeatedly removing it without ejecting it from the desktop can cause it not to be recognized any longer.
If your iBook is a "late 2001" model. It should have a reset button. Check out the chart here to make sure which model iBook you have:
http://support.apple.com/kb/HT1772?viewlocale=en_US
+i get prompt to this screen that shows the world and then a folder with a ? mark but then after a few sec it boots right up+
It's trying to find a network volume from which to boot.
Once it's booted up, go to System Preferences > Startup Disk, and select your Mac OS X startup volume. Then close System Preferences. The next time you start up, it should start up without looking for a network volume.

Greetings, I need a little help. I have a WRT54G Wirele...

Greetings,
I need a little help. I have a WRT54G Wireless Router, and it worked well for years with my Alcatel DSL Modem (Bellsouth/ATT). The modem went out and it was replaced with Westell Modem. When I bypass the router I have no problem connecting to the Internet, however when I connect the router--no connection. I thought it would not be a problem swapping the modem out. I am running XP with Norton Internet Security and Anti-virus. I have disabled Norton and do not believe that to be the problem. Do I have to reconfigure the router? If so, can I do it with the original install CD? (I am disabled and the original CD/instructions/box is in the attic and I cannot get it easily.) I have read several different threads, but they do not specifically address my problem. Any assistance is appreciated. Eddy

Many Westell modems are actually "modem-routers" and they use the same 192.168.1.1 address space as your WRT54G. This is the root of your problems.
Try the settings at this URL.
http://www.dslreports.com/faq/6323
Note that the "WAN" port on the BEFSR41 in the example is the same as the "Internet" port on your WRT54G.
Please let me know whether or not this worked for you.

Need a little help with dial setup on CME

I've got a CME I'm using for testing and I think I need a little help figuring out the proper config to get the system to accept numbers I dial and have those numbers be passed on to an Avaya system (including the leading 9 for ARS in Avaya) via H.323 IP trunks.   I have it working well for internal 5 digit extension calls across the H.323 trunks and I also have it working well for some types of outside calls that gets passed on to the Avaya and then the Avaya dials the call out to the PSTN.   My only real problem is, I can't figure out how to correctly configure CME to examine the digits I'm dialing and only send the digits once I'm finished dialing....not as soon as it sees an initial match.
What's happening is this. I can dial local numbers in my area as 7 digits or 10 digits. The phone company doesn't yet force us to dial area code and number for local calls (10 digits). I can still dial 7 digits.   But...if I put an entry in CME that looks like this....
(by the way, the 192.168.1.1 IP is not the real IP address, that's just an example, but the rest of this entry is what I really have entered in CME)
dial-peer voice 9 voip
description Outside 7 Dig Local Calls Via Avaya
destination-pattern 9.......
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
...Then it will always try to dial out immediately after seeing the first 8 digits I dial (9 plus the 7 digit number I called)...even though I have a speicifc entry in the system that accounts for calls to 9 plus area code 513. I would have assumed that if I put the specific entry in for 9513....... it would see that and wait to see if I was actually dialing something to match 9513....... instead of 9.......   Understand what I mean?   Because 9513....... is more specific than 9....... but it still tries to send the call out immediately after seeing the first 8 digits I dialed.
dial-peer voice 9513 voip
description Outside 10 Dig Local Calls Via Avaya
destination-pattern 9513.......
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
...BUT...here's the interesting thing. If I trace the 10 digit call in Avaya, I see that the number being presented to the Avaya PBX is only the first 7 digits of the number....not the full 10 digits...BUT I see a few more of the digits I dialed (like the 8th and 9th digits) after the call is already setup and sent to the PSTN. It's like the CME is trying to send the rest of the 10 digits I dialed, but at that point it's already too late.   It setup the call as a 7 digit call (9 plus 7 digits), not 10 digit like I wanted.
I'm more familiar with how to setup dialing in the Avaya via ARS. My background is Avaya, not Cisco, so this dial-peer config is a little difficult for me until I understand the reasoning of how it examines the numbers and what I should do to make it wait for me to finish dialing....or to tell the system that what I'm dialing will be a minimum or a certain amount of digits and maximum of a certain amount of digits, like the Avaya does. I just need some pointers and examples to look at :-)   I think I've almost got it....but I'm just missing something at the moment.
Just so you understand, the call flow should be like this: Cisco phone registered to CME > CME to Avaya via H.323 trunks > Avaya to PSTN via ISDN PRI trunks connected to Avaya. I have to be sure I send the 9 to the Avaya also, because 9 triggers ARS in the Avaya.
Thanks for your help

Here is a good document that explains how dial-peers are matched in the Cisco world:
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml#topic7
In your case, it is variable length dial plan you are trying to implenent. To fix it, you need to add a T to force the system to wait for more digits to be entered if there is any.
dial-peer voice 9 voip
description Outside 7 Dig Local Calls Via Avaya
destination-pattern 9.......T
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 9513 voip
description Outside 10 Dig Local Calls Via Avaya
destination-pattern 9513.......
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
You can also configure the inter-digits timeout using the command timeouts interdigit under telephony-service.
Please rate helpful answers!

Need a little help.... not major....but am unsure I have...

Need a little help.... not major....but am unsure I have the 2.4 GHz Wireless-G Broadband Router Model WRT54G version 2 I had bought some time ago (over year and a half) and never really had it hooked up since I have been moving from place to place. Now that I'm retired and staying in one place I'm ready to set up. I find myself having "several" power adaptors and not sure which is the correct one. Can anyone tell me if all the broadband routers had the Linksys name and/or logo on them? None of the adapters I have do. I want to use a proper adapter so as not to damage....are there any specs that would be helpful so that one of these adapters would work? Also I'm running WindowsXP Sorry to bother you folks with a dumb question as I'm sure there are others with far more important questions and concerns. Although I can't tell other than the end going into the unit fits, I do have one Class 2 Transformer which might be the one it's about 1 1/2 inches thick, about 2 inches tall with following written information: Model 49-12-1000D CUI Inc Input AC 120V 60Hz 20W Output DC12V 1000mA Appreciate any help you can give.....I believe my unit is an older one based on version so there may have been a "fatter" adapter then than now.

The power adapter output should be 12V, 0.5A(so 6W power rating)

Need a little help please Airport Express

Need a little help please.
I am trying to set up a wireless network at my home using Airport Express.
I have a regular phone line running in to I assume the modem. From there, there is an Ethernet cable running from that box to the back of the PC. My question is, I think, which of those do I unplug and plug into the Airport Express, the one on the back of the PC or the one that is in the back of the modem, or is this totally wrong.
Any help would be appreciated…
Thanks
In advance…
PS I have the manual but to me it is not very clear…

Your connection sequence would look like this:
Internet > Modem > AirPort Express >>>wireless to your computers.
This means that you would unplug the cable that is now connected at the back of your PC and move that connection to the AirPort Express.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Continue to follow the guided setup. On the third page, you will choose the option to "Create a wireless network" and continue the setup.

Need a little Help with my new xfi titanium

+Need a little Help with my new xfi titanium< A few questions here.
st question? Im using opt out port on the xfi ti. card and using digital li've on a windows 7 64 bit system,? I would like to know why when i use 5. or 7. and i check to make sure each speakear is working the rear speakers wont sound off but the sr and sl will in replace of the rear speakers. I did a test tone on my sony amp and the speaker are wired correctly becasue the rear speakers and the surrond? left and right sound off when they suppose too. Also when i try to click on? the sl and sr in the sound blaster control panel they dont work but if i click on the rear speakers in the control panel the sl and sr sound off. Do anyone know how i can fix this? So i would like to know why my sl and sr act like rears when they are not?
2nd question? How do i control the volume from my keyboard or from windows period when using opt out i was able to do so with my on board? sound max audio using spidf? Now i can only control the audio using the sony receiver.
Thank you for any help..

/Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard.

Need a little help with syncing my iPod.

I got a new macbook pro for cristmas and a few cds. After i tried to sync my ipod to itunes i put a symbol next to each song that i got from other cds saying that they were downloading but they werent. Also the cds i downloaded to my ipod for the first time didnt appear at all. Need help.

/Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard.

EP6 Transaction iView Shortcut... need a little help from my friends

Similar Messages

Maybe you are looking for