EP7.0 (NW04s) Connecting to BI7.0

I have configured a system object for the BI7.0 and the connection test for Connector is working. However, if I try to run a WinGui Transaction iView with that system object, I get the following error:
service " unknown
NiPGetServByName2: service " not found
We only have AS-ABAP installed for BI, will this be a problem? Could it be configuration for the WAS portion of the system object (which fails in the connection test).
I'm stumped as to why the connection test would provide a successful backend connection based on the paramters but not be able to launch a WinGui Transaction iView.
Thanks,
Matt

You might be missing an entry for sapmsSID in your services file on the portal server.
Cheers

Similar Messages

  • Can EP6 NW04 connect to ECC 6.0

    Can EP6 NW04 connect to ECC6.0 or do you need to upgrade to EP7?
    Thanks
    Patrick

    Hi rani
    may i know ur contact no or mail id?
    Regards
    suresh babu

  • EP7 NW04s: bi_showcase, business_explorer_showcase roles not found

    Hi all-
    I would like to integrate BW7.0 and EP7.0 (NW04s) but I cannot find any of the bi showcase roles in the PCD. I have read all the other relevant threads and tried every location given, but they simply are not there. Is there something I am missing on the install? My hunch is that KM may be necessary, but can someone confirm?
    Thanks much,
    Matt

    Hey @ All,
    how did you install the EP? What kind of Usagetype did you select?
    To have the BI content installed to the EP you need to install the BI usagetype as well. So in SAPinstaller you have to check the marks properly.
    If you have installed only the EP usagetype you are able to reinstall the BI usagetype afterwards. As far as I know you can start the SAPinstaller again and set the right checkmarks.
    The BI (usagetype) content needs a WEBAS Java and EP installed.
    Hope this explanation helped a little... if so points are very welcome since i am starting from scratch!
    kind regards
    Tobi

  • Connecting SAP BI7.0 BW System(Target)  to SAP BI 3.1 System(Source)

    Hi Gurus,
    I need to connect existing SAP BW3.1 system(Source) to SAP BW 7.0 system (Target).I need to move all the existing data to target.
    1.How data is transfered from source BW system to target in case of BW to BW?(Via Delta Queue etc....).
    Is it same like connecting to R/3 system?
    2.What would be the impact of connecting BW3.5 source system to target 7.0 system?
    Can i use existing 7.0 datasource?
    Thanks and Regards,
    MuraliManohar.

    1.How data is transfered from source BW system to target in case of BW to BW?(Via Delta Queue etc....).
    Is it same like connecting to R/3 system?
    You need to establish the connection - Source system tab -  under BI and  In 3.x system you have to export datasoure for all your targets(ods/cube) and then replicate them in 7.x
    You can use 8ODS as datasource for your new targets in 7.x
    There won;t be any delta queue
    2.What would be the impact of connecting BW3.5 source system to target 7.0 system?
    Can i use existing 7.0 datasource?
    You can still use 7.xDS plus 8ods as DS to your targets
    to get historical data we usually connect 3.x to 7.x

  • Creating a System in System Landscape of EP7.0 connecting to ESS6.0

    Could someone explain in detail and hopefully with examples, of the process of creating the System with the alias 'SAP_WebDynpro_XSS' in the System Landscape when implementing ESS.
    I am getting an error message of wrong password, and I think it has to do with the fact that I haven't entered this data in correctly.
    Thanks,

    check at
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/49/f7cf3f06bd3946e10000000a114084/frameset.htm">Creation of system</a>
    hope this helps,
    regards,
    Sudhir

  • How do I know whether an EP7(JAVA only) is connected to a TREX?

    On an ABAP system I can figure out if it is connected to a TREX or not.
    But how to find out if an EP7 is connected to a TREX?  Thanks!

    you can check it in visual administrator , TREX name server .
    visual admins location: /usr/sap/<SID>/j2ee/admin/ go -
    Visual admin-> Services ->Trex Service
    Jo

  • EP7 upgrade from SP11 to SP12

    Hi experts,
    We are using read-write connection to LDAP from SAP Portal EP7 NW04s.
    All user groups are maintained in LDAP and in portal we have assigned relevant roles to these groups.
    After we’ve upgraded EP7 from SP11 to SP12, we can’t see the roles that are assigned to the groups.
    It is reasonable to assume, that roles are still related to groups and we just can’t see it, because users get the relevant roles when they enter the portal.
    Had anybody upgraded SP11 to SP12 and experienced the same problem?
    Thanks in advance,
    Inna

    Hello, I am having the same problem. But nobody answered...
    Look at this thread : Worksets problems after upgrade to SP12
    Did you find a solution??
    Thanks in advance!

  • Installed Netweaver 2004s with Rapid Installer , can not connet to BI7.0!!!

    Hi,
    I installed Netweaver 2004s with rapid installer but i can not connect to BI7.0 with SapLogon 710. SapLogon waiting for response forever. What are the post actions after I installed the Netweaver 2004s. I can connect to portal by IE.
    I am new to this so any help will be greatly appreciated.
    thanks,
    Jenni

    OS is Windows Server. SAPID is IKI. I am the only one trying to connect to BI so DPMON is not the issue. I wanted to stop and start the SAPIKI_03 service but I can not stop it, maybe it is related to that.
    What are the post steps after installing rapid installer?
    How can I make sure that I installed Java+Abap stack or only Java?
    Thank you for your help.
    jenn

  • Problem: Establishing SSO between EP7.0(UC)  to SRM 4.0(non unicode)

    Dear gurus
    While creating SSO between EP 7.0 and SRM 4.0(non Unicode)....while uploading the certificate with  SSO2 tool from portal....by selecting add trusted system, The system throwing error message like:
    Error occurred: Selected system does not have SSO Model deployed.
    is there any restrictions are there for unicode system to Non system...Actually by using my EP system i am able to connect the BI7.0 system very well, where i am getting the erro with SRM 4.0 system only
    any help please
    Thanks in advance

    No, there are no such restrictions for SAP Logon Tickets / Assertion Tickets and Unicode vs. Non-Unicode systems.
    If you are using the [NWA Trust Configuration Wizard|https://service.sap.com/sap/support/notes/1083421] then it might happen that the [ABAP backend system does not provide the required APIs|https://service.sap.com/sap/support/notes/1014077]. In that case you have to setup the SSO2 trust relationship manually (using ABAP transaction STRUSTSSO2).

  • Transports from BI7.0 SP18 to BI7.0 SP20

    Hello Experts,
    Currently our source system is under upgrade to ECC6.0 from 4.6C, due to this our BI development landscape has changed. after upgrade of Dev system to ECC6.0 and connecting to BI7.0 system throwing an error ( Unicode Error), to correct this SAP recommends to implement SP19, but after analysis we found it may require to implement SP20 correct few issues of SP19 import.
    But my concern is, due to our BI7.0 landscape change,our current developments are taking place in another system, but after upgrade our old development system ( This will connect to ECC6.0 and we are planning to implemnet SP19 or SP20) become our development box. So, what ever we are developing in current dev. box, we are moving them to another dev.box to maintain both systems in sync. but our current dev. box is in SP18 and the other dev box, which is become our original dev.system after upgrade will be in SP19 or SP20 or higher. If I transport from a system which is in SP18 to higher, will it supports or give any error?? is it advisiable.
    Please suggest...
    Thanks & Regards
    Charan

    Hi,
    If I transport from a system which is in SP18 to higher, will it supports or give any error??
    --> Transport go properly. As sending to higer version only. No issues..
    Srini

  • NLB Load Balancing

    Hi all,
    Could explain the procedure of MS NLB for Portal server - my system config -
    1-CI, 1-DI, 1-DB instance and the CSI resides in the DB box, EP7, NW04s java stack only connected to a backend R/3 System. Please help give the detailed procedure.
    Thanks & regards,
    Sankar.

    Hi naveed,
    This is normal. NLB is using the node that has the fastest response / highest priority and/or your configuration you can find more info about this here :
    Network Load Balancing Technical Overview
    http://technet.microsoft.com/en-us/library/bb742455.aspx
    Greetings, Robert Smit Follow me @clustermvp http://robertsmit.wordpress.com/ “Please click "Vote As Helpful" if it is helpful for you and Proposed As Answer” Please remember to click “Mark as Answer” on the post that helps you

  • VC model fails for one user but not another - both have same auths

    We have a VC model that we created and moved to Prod (portal NW04s connecting to BW 3.5 query).  It works fine for user A, but user B gets error:
    #1.5#0003BADBD644002D000000030000053D0004282F58AC16AC#1170083723088#com.sap.port
    al.visualComposer_NWBIKit_logger#sap.com/irj#com.sap.portal.visualComposer_NWBIK
    it_logger#DOBREGON#11523#####SAPEngine_Application_Thread[impl:3]_5##0#0#Error#1
    #/System/Server#Java###Cannot execute BW query::Nested Exception. Failure to exe
    cute native function. Nested Exception. INVALID_VARIABLE_VALUES
    Both user have same authorizations in Portal and BW backend.
    There is no trace info on the BW back end, so it seems like the hangup is occuring on the portal side.

    It turns out it was the backend authorizations.  The user was able to view the BW query via the BEX Explorer.  But when she tried to access it via a VC Flex IView, we got that error.  Initially I wasn't seeing any auth traces in the BW system, but then we expaneded the trace and determined the user was missing an activity.   It's a strange error.  Would be nicer to see a 'user not authorized' or something along those lines to better pinpoint the cause.  But we're good now.

  • Creation Logical System

    Hi All,
    I have Installed ECC6 in C: drive & BI7 in virtual machine in same PC and created RFC connections between these two servers (ECC6 & BI7) and checked RFC connections in BI7 as mentioned below -
    RSA1 ->Source System -> Right Click on T90CLNT090 (Created by SAP) -> Check, Then massage is showing  "Source system connection T90CLNT090 OK"
    Then I have activated ECC6 Data Source 0SD_C01 and then replicate the source system (T90CLNT090) in BI 7
    But the Data Source 0SD_C01 is not appearing in BI7
    In my office there are three modules BI 7, ECC6 & APO and these module icons are appearing in BI7 source system, I want to know what are the steps to create these SAP like ECC6 icon in my BI7 source system
    Kindly suggest if anything I have missed or needs to be create.
    Regards,
    Rakesh Kumar

    HI,
      0SD_C01 is a cube. Activate the datasource corresponding to the cube in RSA5 in source and check in RSA6(source) whether the datasource are visible. Then replicate the source system in BI.
    Regards,
    Raghavendra.

  • RSTT with Webi query is not working

    Hi, Guru;
    I want to use RSTT to trace MDX by running Webi query. My Webi is built on universe and connect to BI7.0 query with user 'BOXIUSER'.
    Now my issue is I activated 'BOXIUSER' in RSTT and whenever I ran the Webi, there is no trace id created in 'Traces' tab.
    What's wrong with that? Any other setting I should do?
    Thanks!
    Haiying

    Hello Haiying,
    We have the same problem after updating to BO Edge SP2 FP2.2.
    I am currently checking where this problem comes from.
    If you have new information please let me know.
    Cheers,
    Andreas

  • Customizing MSS reporting period dropdown

    We are in the process of upgrading our portal from EP6 to EP7 (NW04s). We have installed the updated business packages for MSS which are now web dynpro iViews. In the previous selection criteria iView that we utilized, we could set a property "Selection period values" to customize the entries available in the period dropdown. I do not see such a property on the new reporting iView I am using, mss~rpt. Is anyone familiar with how to accomplish this?

    Hi Darren,
    We do have a property in the iview for which you can set the period. You need to know the name of the property. Give us the iview name so that we can have a look.
    Cheers,
    Sathya

Maybe you are looking for