EP7.1 compatibility with ESS/MSS 1.0
Does anyone know if EP7.1 is compatible with ESS/MSS 1.0?
Thanks,
Rose
check
http://sdn.sap.com/irj/portal/contentportfolio
service.sap.com/ess
service.sap.com/mss
reward points if helpful
Similar Messages
-
Hello everyone,
We have a ERP 6.0 (based on NetWeaver 7.0) and a SAP Portal 7.0 with ESS/MSS. We now need to update the ERP to EHP6 or EHP7, my question is regarding SAP Portal, do we need to upgrade the Portal to 7.3x or 7.4? Where can I validate this dependencies?
Best regards,
JAMHi JA,
The line means you can use existing SAP Portal and you can update you SPS level to latest version in-order to support the ECC6 with EHP7 rather than upgrading Portal version to NW7.40.
"you can do a SP update in your portal to get a equivalence level and get the newer version of SAP ECC backend supported"
And the equivalence of SP level is as below which you can find for ECC version:-
EhP7 SPS 06 -- EhP6 on Hana SPS08 -- EhP6 SPS13 -- EhP5 SPS13 -- EhP4 SPS16 -- EhP3 SPS15 -- EhP2 SPS16 -- SAP ERP 6.0 SPS26
For Netweaver:-
Installed Release Target Release
SAP NetWeaver 6.20 SAP NetWeaver 7.3
SPS 70 (or lower) SPS 05 (or higher)
SPS 71 SPS 07
SPS 72 SPS 08
SPS 73 SPS 09
Installed Release Target Release
SAP NetWeaver 2004 SAP NetWeaver 7.3
SPS 25 (or lower) SPS 01 (or higher)
SPS 26 SPS 02
SPS 27 SPS 03
SPS 28 SPS 04
SPS 29 SPS 07
SPS 30 SPS 08
SPS 31 SPS 09
Installed Release Target Release
SAP NetWeaver 7.0 SAP NetWeaver 7.3
SPS 22 (or lower) SPS 01 (or higher)
SPS 23 SPS 02
SPS 24 SPS 03
SPS 25 SPS 04
SPS 26 SPS 07
SPS 27 SPS 08
SPS 28 SPS 09
SPS 29 SPS 10
SPS 30 SPS 11
SPS 31 SPS 12
Installed Release Target Release
SAP EHP 1 NetWeaver 7.0 SAP NetWeaver 7.3
SPS 07 (or lower) SPS 01 (or higher)
SPS 08 SPS 02
SPS 09 SPS 03
SPS 10 SPS 04
SPS 11 SPS 07
SPS 12 SPS 08
SPS 13 SPS 09
SPS 14 SPS 10
SPS 15 SPS 11
SPS 16 SPS 12
Installed Release Target Release
SAP EHP 2 NetWeaver 7.0 SAP NetWeaver 7.3
SPS 06 (or lower) SPS 02 (or higher)
SPS 07 SPS 03
SPS 08 SPS 03
SPS 09 SPS 04
SPS 10 SPS 07
SPS 11 SPS 07
SPS 12 SPS 08
SPS 13 SPS 09
SPS 14 SPS 10
SPS 15 SPS 11
SPS 16 SPS 12
Installed Release Target Release
SAP NetWeaver 7.1 SAP NetWeaver 7.3
SPS 10 (or lower) SPS 01 (or higher)
SPS 11 SPS 02
SPS 12 SPS 03
SPS 13 SPS 05
SPS 14 SPS 07
SPS 15 SPS 08
SPS 16 SPS 09
SPS 17 SPS 10
SPS 18 SPS 11
Installed Release Target Release
SAP EHP 1 NetWeaver 7.1 SAP NetWeaver 7.3
SPS 05 (or lower) SPS 01 (or higher)
SPS 06 SPS 02
SPS 07 SPS 03
SPS 08 SPS 05
SPS 09 SPS 07
SPS 10 SPS 08
SPS 11 SPS 09
SPS 12 SPS 10
SPS 13 SPS 11
Installed Release Target Release
SAP NetWeaver 7.2 SAP NetWeaver 7.3
SPS 03 (or lower) SPS 01 (or higher)
SPS 04 SPS 02
SPS 05 SPS 03
SPS 06 SPS 05
SPS 07 SPS 07
SPS 08 SPS 08
SPS 09 SPS 09
Also Do check the 1532805 - Add-On Compatibility of SAP NetWeaver 7.3 note as well so that you can have a add-ons checks too.
Regards,
Ram -
Issue with ESS/MSS Business package 1.41
Hi All
I had an issue with ESS/MSS recently we deployed Business package 1.41 it contains HCM Forms and Process also,
and we assigned the standard Manager-self-service role & Employee-self-service-role to test user but when the user is trying to access the standard application he is getting Portal runtime error.
Is there any configuration is need from HRFunctional side and Basis side
if any body have an idea please let me know ASAP.
For every MSS standard applications like :work overview ,Recruiting,Team,Talent Management,Budjet,Projects,Planning ,Organization, leave
I am getting like below error.
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 02:17_13/04/11_0031_116801250
Refer to the log file for details about this exception.
Thanks
Renu.Hi All
Here I am giving logs detail I got two logs so giving both logs , can anybody help on this issue , if any configuration need please suggest.
Full Message Text
03:19_13/04/11_0045_116801250
[EXCEPTION]
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template '<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-ep-iviewhandle=007<ESID[HASH]>&sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&sap-wd-tstamp=<$TimeStamp>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>'; the problem occured at position 310. Cannot process expression <System.client> because Invalid System Attribute:
System: &#39;SAP_LocalSystem&#39;,
Attribute: &#39;client&#39;.
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Next One
Full Message Text
Exception ID:03:19_13/04/11_0045_116801250
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.roles/com.sap.pct.erp.mss.manager_self_service/com.sap.pct.erp.mss.manager/overview/com.sap.pct.erp.mss.work_overview/com.sap.pct.erp.mss.workoverview/com.sap.pct.erp.common.key_figure_monitor
Component class : com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent
User : P00000531
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template '<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-ep-iviewhandle=007<ESID[HASH]>&sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&sap-wd-tstamp=<$TimeStamp>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>'; the problem occured at position 310. Cannot process expression <System.client> because Invalid System Attribute:
System: &#39;SAP_LocalSystem&#39;,
Attribute: &#39;client&#39;.
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
... 29 more -
Compatability of ESS/MSS ERP 2004 with ECC 6.0
Hi,
I was using ERP 2004 ESS/MSS on EP 7.0 SP 8. My backend was ECC 5.0.
Recently we upgraded our backend to ECC 6.0. But after the upgradation the ESS/MSS packege is not working on the portal. Its showing the below error.
<b>com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException: Could not find portal application com.sap.portal.appdesigner.api_framework
at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java(Compiled Code))
at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java(Compiled Code))
at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:180)
at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:232)
at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.start(SAPJ2EEApplicationItem.java:192)
... 8 more</b>
Is ERP 2004 ESS/MSS comapatbile with ECC 6.0 or there are any steps to be performed after upgradation from ECC 5.0 to ECC 6.0?
Any suggestions??
Regards
DebasishThe new Business Packages meant for ECC 6.0 are based on Webdynpro for Java ....which have a different and better look and feel ....these are based on a RoadMap(Floor Plan Manager) which let the employees/managers to go from Overview(dislay the data),edit (to change) ,Review(to review) and Confirmation (To Confirm)....
Hope it helps.
Shikhil -
Help with ESS MSS documentation
Dear All,
please help me with the documentation on ESS MSS.
Thanks in advance
Regards
MinalHi,
Check this links:
http://help.sap.com/saphelp_erp2005/helpdata/en/f6/263359f8c14ef98384ae7a2becd156/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm
Regards,
NR -
Hi Guys
We are using EP 7 sp13 with ECC 6 (sp13 ) we currently have ESS/MSS sp11 on it.
All the ESS links work except EMPLOYEE SEARCH> CHANGE OWN DATA. it gives me the following error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: failed to create or init instance of model 'com.sap.xss.hr.cod.model.CodModel' in scope APPLICATION_SCOPE with instanceId 'null'
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:102)
at com.sap.xss.hr.cod.FcCodBusinessLogicComp.callRFCDequeuePernr(FcCodBusinessLogicComp.java:396)
at com.sap.xss.hr.cod.FcCodBusinessLogicComp.onCleanup(FcCodBusinessLogicComp.java:259)
at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicComp.onCleanup(InternalFcCodBusinessLogicComp.java:520)
at com.sap.xss.hr.cod.FcCodBusinessLogicCompInterface.onCleanup(FcCodBusinessLogicCompInterface.java:126)
... 57 more
Here are those logs : #sap.com/tcwddispwda#com.sap.tc.webdynpro.sessionmanagement#shkaidyc#259##iecnt4006.ho.iec_EPD_12230850#shkaidyc#4f231680db9211dcbf1a001a64353d88#SAPEngine_Application_Thread[impl:3]_34##0#0#Error#1#/System/UserInterface#Java###An exception occured during application processing which got lost due to an additional exception that occured during session management post-processing phase. See nested exception for details about the original problem. Application=, RID=#2#com.sap.xss.hr.cod.ChangeOwnDataApplication#524da280db9211dcc053001a64353d88#
#1.5 #001A64353D8800700000003000000F480004462CD31C2A02#1203058240790#/System/UserInterface#sap.com/tcwddispwda#com.sap.tc.webdynpro.sessionmanagement.ExceptionHandler.handleThrowable#shkaidyc#259##iecnt4006.ho.iec_EPD_12230850#shkaidyc#4f231680db9211dcbf1a001a64353d88#SAPEngine_Application_Thread[impl:3]_34##0#0#Error#1#/System/UserInterface#Java###Exception occured during processing of Web Dynpro application . The causing exception is nested.#1#sap.com/ess~cod/ChangeOwnDataApplication#
#1.5 #001A64353D88005E0000001F00000F480004462CE8F64BF0#1203058607346#/System/UserInterface#sap.com/tcwddispwda#com.sap.tc.webdynpro.sessionmanagement.ExceptionHandler.handleExpiration#Guest#0##iecnt4006.ho.iec_EPD_12230850#shkaidyc#4f231680db9211dcbf1a001a64353d88#SAPEngine_Application_Thread[impl:3]_0##0#0#Info#1#com.sap.tc.webdynpro.sessionmanagement#Java###Session unknown: Request was sent to unknown session. Either request with wrong session parameters was sent, or session has expired before . Current request parameters=. Is termination request=. Hint: see SAP note 842635 for more details on session expiration. RID=#7##Fri Feb 15 08:10:17 CAT 2008#{sap-wd-norefresh=X, DESTRUCTION_REASON=Destroyed by invalidation of HTTP session}#true###2cda6d20db9311dcbf6b001a64353d88#
#1.5 #001A64353D8800750000001F00000F480004462CED64CEC3#1203058681692#/System/UserInterface#sap.com/tcwddispwda#com.sap.tc.webdynpro.i18n.ClientSession.computeLocale#shkaidyc#402####592848c1db9311dca3cb001a64353d88#SAPEngine_Application_Thread[impl:3]_20##0#0#Info#1#com.sap.tc.webdynpro.i18n#Java###Computed locale for session : . Locale usage=. RID=#4#ClientSession(id=(J2EE12230800)ID1122215150DB00456128513810716498End_968000287)#<null>#locale was already computed in the session#592848c0db9311dccbae001a64353d88#
#1.5 #001A64353D880056000003B700000F480004462CEE901955#1203058701301#/System/UserInterface#sap.com/tcwddispwda#com.sap.tc.webdynpro.sessionmanagement#shkaidyc#402##iecnt4006.ho.iec_EPD_12230850#shkaidyc#592848c1db9311dca3cb001a64353d88#SAPEngine_Application_Thread[impl:3]_32##0#0#Error#1#/System/UserInterface#Java###An exception occured during application processing which got lost due to an additional exception that occured during session management post-processing phase. See nested exception for details about the original problem. Application=, RID=#2#com.sap.xss.hr.cod.ChangeOwnDataApplication#64ceeb70db9311dc9d1e001a64353d88#
#1.5 #001A64353D880056000003B900000F480004462CEE902134#1203058701301#/System/UserInterface#sap.com/tcwddispwda#com.sap.tc.webdynpro.sessionmanagement.ExceptionHandler.handleThrowable#shkaidyc#402##iecnt4006.ho.iec_EPD_12230850#shkaidyc#592848c1db9311dca3cb001a64353d88#SAPEngine_Application_Thread[impl:3]_32##0#0#Error#1#/System/UserInterface#Java###Exception occured during processing of Web Dynpro application . The causing exception is nested.#1#sap.com/ess~cod/ChangeOwnDataApplication
And the link CAREER AND JOBS only SKILLS PROFILE works, the rest gives the following error :
Portal Runtime Error
An exception occurred while processing your request
Exception id: 02:21_15/02/08_0004_12230850
See the details for the exception ID in the log file.
#1.5 #001A64353D88005F0000001C00000BE400044631A5243BC5#1203078944497#/System/Server#sap.com/irj#com.sap.portal.sapapplication#shkaidyc#331##iecnt4006.ho.iec_EPD_12230850#shkaidyc#922658f0dbc111dc9663001a64353d88#SAPEngine_Application_Thread[impl:3]_33##0#0#Error#1#com.sap.portal.sapapplication#Java###Content pass of Application Integrator failed.
Component Name: 'com.sap.portal.appintegrator.sap.BSP',
Context Name (iView): 'pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_career_job/com.sap.pct.erp.ess.profile_release/com.sap.pct.erp.ess.profile_release',
Top Layer: 'BSP/TopLayer',
Producer ID (FPN): 'null',
System Alias: 'SAP_EREC_TalentManagement',
#1.5 #001A64353D88005F0000001E00000BE400044631A5244180#1203078944497#/System/Server#sap.com/irj#com.sap.portal.portal#shkaidyc#331##iecnt4006.ho.iec_EPD_12230850#shkaidyc#922658f0dbc111dc9663001a64353d88#SAPEngine_Application_Thread[impl:3]_33##0#0#Error#1#com.sap.portal.portal#Java###Exception ID:02:35_15/02/08_0006_12230850##
#1.5 #001A64353D8800720000002D00000BE400044631A82673C3#1203078994967#/System/Server#sap.com/irj#com.sap.portal.sapapplication#shkaidyc#331##iecnt4006.ho.iec_EPD_12230850#shkaidyc#922658f0dbc111dc9663001a64353d88#SAPEngine_Application_Thread[impl:3]_13##0#0#Error#1#com.sap.portal.sapapplication#Java###Content pass of Application Integrator failed.
Component Name: 'com.sap.portal.appintegrator.sap.BSP',
Context Name (iView): 'pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_career_job/com.sap.pct.erp.ess.data_overview/com.sap.pct.erp.ess.data_overview',
Top Layer: 'BSP/TopLayer',
Producer ID (FPN): 'null',
System Alias: 'SAP_EREC_TalentManagement',
#1.5 #001A64353D8800720000002F00000BE400044631A82679B3#1203078994967#/System/Server#sap.com/irj#com.sap.portal.portal#shkaidyc#331##iecnt4006.ho.iec_EPD_12230850#shkaidyc#922658f0dbc111dc9663001a64353d88#SAPEngine_Application_Thread[impl:3]_13##0#0#Error#1#com.sap.portal.portal#Java###Exception ID:02:36_15/02/08_0007_12230850##
If one clicks on MMS it opens fine, but when you go to the tab REPORTS it gives the same error as the CAREER AND JOB ERRORS in ESS.
Edited by: Clyton Shkaidy on Feb 15, 2008 1:58 PMHi Clyton,
We are implementing SAP ESS on EP 7.0. This is the first time i been working on ESS project.
Can you let me know the process of EP installation and about ESS Bussiness Packages and
How you connect R/3 and ESS ???
Can you mail me some screen shot of your ESS screen...
Following things are in our scope
Employee Self Service (ESS) will be activated for the following functionalities:
 Address Book
Whos Who
Organizational Chart (if available)
 Time Management
Leave Request
Time Accounts
Record Working Time (CATS)
Clock-in/out corrections
Time Statement
 Payroll & Payment
Salary Statement
Total Compensation Statement
Form 16
Declarations against Sec 80C
Claims / Reimbursements
Loan Applications (To be decided during Blueprint)
 Personal Information (Browse only)
Address
Bank Information
Personal Data
Family Data
 Travel Management
Travel Planning
Travel Expenses
Trips and Expenses
Travel Profile
 Life and Work Events
My First Days
Birth / Adoption / Marriage / Divorce
 Performance Management
Appraisals
 Corporate Information
Code of Business Conduct
All workflows / Alerts required to support the above functions will be activated/configured.
Please guide me for the same... -
Problem with ESS/MSS configuration
Hi All,
I want to start with ESS and MSS development. For the purpose I have downloaded the file BPERP4ESS01_0-10003146.sca and deployed it using SDM.
I am going through the pdf ESS Configuration Document.pdf.
The pdf talks about JCo which need to be created in Web Dynpro Content Administrator.I am unable to find the JCo's .
Please let me know how to proceed.
Thanks
NikhilHi,
Login to http://server:port/index.html
If u want to see the jco, then go to Web Dynpro-->content administrator and click the tab 'create jco'.
But the tab wont be enabled unless u give permission in visual admin for the service 'sld data supplier'. i.e check the .lcr and webdynpro check boxes. Once checked, check if the CIM client test is successful.
Regards,
Vijai -
WebSphere Integration with ESS/MSS Error
Hi All,
We are trying to setup a scenario where we embed the SAP Portal within WebSphere portlets. Plan is that we would have WebSphere link to the ESS HomePage. We have setup a URL alias in the web-inf with nested_window=1. The websphere guys are using the the WebSphere clipper to create the portlets but this is giving us javascript errors (e.g. Access Denied, etc). This means when we click on any of the ESS framework links e.g. Personal Data the webdynpro spinner comes up and nothing happens i.e. they screen does not change.
Any thoughts on what might be the issue? Is the Clipper the best tool to use?Hi Mendonca,
Error is due to mis match of patches.
Check with SAP_HR and EA_HR patches. Try to maintaine the patches to 26 patch. By this u can resolve the issues.
That means Patches from Java side and Backend side need to be maintained at there same levels.
Regards,
kishore. -
Time record approval with ESS/MSS
Hello,
I am new to MSS and I am facing some problems. I would like to get the time approval process started.
The projects are set up with cProjects and then transfered to PS. The WBS-items are taken for the time recording. Now I would like to approve this time recordings.
Unfortunately I don't have an idea what has to be configured to use the uwl:
- I think that I need to customize CATS to use the workflow (but which one)
- and then to configure the UWL in order to get the items...
Is this true?
Navigation through the portal and calling "team" in the MSS-menu an uncaught exception occurs saying that I have to configure infotyp 0008 for the employee I am using. Why do I need to set up the infotyp 0008 in order to see my team?
Calling the application for approval direct leads to the MSS overview.
Could somone bring some light in my darknes and tell me what I have to configure so that the project manager / line manager can see the recorded time that needs to be approved?
Thanks in advance, VanessaThanks ...we would implement both then and I assume that the approve Timesheet application would be under "Team" Workset but when I click on it ..I get the error as:
No Views found: Missing customizing:
java.lang.Exception: No Views found: Missing customizing
at com.sap.xss.ser.tecl.fc.FcTeamCalendar._checkData(FcTeamCalendar.java:799)
at com.sap.xss.ser.tecl.fc.FcTeamCalendar._getData(FcTeamCalendar.java:751)
at com.sap.xss.ser.tecl.fc.FcTeamCalendar.initialReadData(FcTeamCalendar.java:385)
at com.sap.xss.ser.tecl.fc.wdp.InternalFcTeamCalendar.initialReadData(InternalFcTeamCalendar.java:319)
at com.sap.xss.ser.tecl.fc.FcTeamCalendarInterface.initialReadData(FcTeamCalendarInterface.java:229)
at com.sap.xss.ser.tecl.fc.wdp.InternalFcTeamCalendarInterface.initialReadData(InternalFcTeamCalendarInterface.java:294)
at com.sap.xss.ser.tecl.fc.wdp.InternalFcTeamCalendarInterface$External.initialReadData(InternalFcTeamCalendarInterface.java:382)
at com.sap.xss.ser.tecl.vc.VcTeamCalendarInterface.initialReadData(VcTeamCalendarInterface.java:362)
at com.sap.xss.ser.tecl.vc.wdp.InternalVcTeamCalendarInterface.initialReadData(InternalVcTeamCalendarInterface.java:327)
at com.sap.xss.ser.tecl.vc.VcTeamCalendarInterface.onBeforeOutput(VcTeamCalendarInterface.java:174)
at com.sap.xss.ser.tecl.vc.wdp.InternalVcTeamCalendarInterface.onBeforeOutput(InternalVcTeamCalendarInterface.java:263)
at com.sap.xss.ser.tecl.vc.wdp.InternalVcTeamCalendarInterface$External.onBeforeOutput(InternalVcTeamCalendarInterface.java:436)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:603)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:569)
Appreciate your help. -
Hi All,
In scope E- Recruitment & System is going to be on EHP-6 with ESS/MSS, i went through Mr.Luke Marsons some ofthreads which talks about if system is at EHP-4 then STVN(Nakisa),Netviewre is required.
Now i am confused my question after all this reading & exploration is , As E-Rec,ESS/MSS,EHP-6 is gonna be in placestill does the client has to go for NAKISA & buy those additional 3rd part lisences Or is this task of Talent Mgmt & Succesion Plan acievable in Standard SAP EHP-6.
Please guide as i in mid of somthing & need ur urgent assistance.
Thanks.Hi Experts,
Can i get any updates on this issue. -
NetWeaver Portal and ERP 6.0: BI, ESS/MSS and full Portal on one machine
Hello,
with ERP 6.0 you need a EP Core Portal for BI Java. An other EP Core Portal for HCM ECC/MSS. The iViews from this portal you integrate in the main portal via federated portal. But in this scenario i need to much portals and have a lot of maintenance costs (administration overhead for evry portal). For a small Customer i will build one Portal for all. It is possible e.g. to use the BI Portal with ESS/MSS and as full portal?
Best regards,
PatrickHi,
So you would like one BI installation with both the ABAP and the Java-stack with the full BI-functionallity and additionally the XSS-component and set it up to work against the ECC ABAP-only system ?
I think the scenario would actually work, but:
1) You might get future problems if you want to upgrade your BI-system and not the ECC-system.
Is it possible to run the old XSS-components in the new java-stack ?
2) You might get future problems if you want to upgrade your ECC-system and not the BI-system.
What if the new version of the XSS-component demands certain java-components which the BI-system do not have.
So my recommendation is still to run the java-stack on both systems.
ECC with the XSS-java-components and BI with the Bi-java-components.
This way you do not lock yourself into a corner and each system can be upgrade independent of the other. -
Approve link not working in ESS/MSS UWL portal
Hi experts,
we are using portal 7.3 with ess/mss.
in mss when user is approving a leave request, he is not ale to proceed
after few steps as one link "pprove another request" is not working.
this i a standrd portal scren in UWL. please suggest.
Thanks a lot in advance.Hello,
This should be possible with some UWL configuration. Please check the following forum post: http://forums.sdn.sap.com/thread.jspa?threadID=1677777
Kr,
Julien -
Where Web Dynpro Java version of Adobe Forms are used in ESS MSS
Hi, SDN Expert.
I am working on research the use of Adobe Interactive Forms in the current processes of HCM ESS MSS.
We are on ECC5.0, EP7.0, and ESS MSS SP21. We are in the midst of upgrading to ECC6.0.
Do you know where Web Dynpro Java version of Adobe Forms are used in ESS MSS are used? OR are they all in Web DYnpro ABAP version in ECC6.0?
Thanks,
KCSergio,
FYI.
I am trying to see how the form I design/modify in TCode: SPF are working together to these piece of codes I found in NWDI WD4J pcui_gpisrsap.com --> VcISRShowForm DC --> ShowForm view:
public void wdDoInit()
//@@begin wdDoInit()
InteractiveForm form =
(InteractiveForm) ((View) wdThis.wdGetAPI()).getElement("IsrForm");
form.setDynamicPDF(true);
form.bindPdfSource((IWDAttributeInfo) null);
//@@end
public static void wdDoModifyView(IPrivateShowForm wdThis, IPrivateShowForm.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
//@@begin wdDoModifyView
logger.pathT("Entering: wdDoModifyView");
// Dynamic context generation
// Bind context
if (wdContext.nodeNewGenericChildNodes().size() > 0) {
if (wdContext.currentContextElement().getContextToBeReset())
wdContext.nodeData().getContext().reset();
IWDNodeInfo genericNode = wdContext.nodeData().getNodeInfo();
IWDNodeInfo origNode =
wdThis
.wdGetVcISRShowFormController()
.wdGetContext()
.nodeGenericNode()
.getNodeInfo();
IWDNodeInfo childNode;
IWDNodeInfo deepChildNode;
for (int i = 0;
i < wdContext.nodeNewGenericChildNodes().size();
i++) {
childNode =
origNode.getChild(
wdContext
.nodeNewGenericChildNodes()
.getElementAt(i)
.getAttributeValue("name")
.toString());
deepChildNode = childNode.getChild("DATA");
genericNode.addMappedChild(
childNode.getName(),
null,
childNode.isSingleton(),
childNode.isMandatorySelection(),
childNode.isMultipleSelection(),
childNode.getPathDescription(),
false,
true);
genericNode.getChild(childNode.getName()).addMappedChild(
deepChildNode.getName(),
null,
deepChildNode.isSingleton(),
deepChildNode.isMandatorySelection(),
deepChildNode.isMultipleSelection(),
deepChildNode.getPathDescription(),
false,
true);
genericNode
.getChild(childNode.getName())
.getChild(deepChildNode.getName())
.addAttributesFromDataNode();
// Avoid another context generation - all context have been generated
wdContext.nodeNewGenericChildNodes().invalidate();
InteractiveForm form = (InteractiveForm) view.getElement("IsrForm");
//Set the template source of the form (if necessary)
if (wdContext
.currentIsrParamsElement()
.getSetTemplateSourceNecessary()) {
form.setTemplateSource(
wdContext.currentIsrParamsElement().getTemplateSource());
wdContext.currentIsrParamsElement().setSetTemplateSourceNecessary(
false);
logger.pathT("Exiting: wdDoModifyView");
//@@end -
Can anybody send me some docs on ESS/MSS and Adobe Forms.
Hi all,
Can anybody please send me some doc/materials/link on how to coonfigure/develop/work with ESS/MSS and Adobe forms.
Its very urgent requirement.
Thanks n Regards
A.M.RaoFor ERP 2005 check out
hi ,
for ess..
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAESS/ESSIAC.pdf
Personnel Admin.http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/0fab358b096510e10000009b38f839/frameset.htm
Training & Event management
http://help.sap.com/saphelp_erp2005vp/helpdata/en/44/2bc9367a23fb68e10000009b38f889/frameset.htm
Personnel Development
http://help.sap.com/saphelp_erp2005vp/helpdata/en/cf/5e9b38f8236e6de10000009b38f842/frameset.htm
ESS - http://help.sap.com/saphelp_erp2005vp/helpdata/en/5b/76a6d7fd3a4e91bfb422405bf3e04d/frameset.htm
MSS - http://help.sap.com/saphelp_erp2005vp/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm
For ERP 2004
ESS - http://help.sap.com/saphelp_erp2004/helpdata/en/5b/76a6d7fd3a4e91bfb422405bf3e04d/frameset.htm
MSS - http://help.sap.com/saphelp_erp2004/helpdata/en/0a/8b3b40b1607a56e10000000a1550b0/frameset.htm
Also if you have S User ID on SAP Service Marketplace, check out https://service.sap.com/mss-staging for MSS.
regards,
venkat. -
Multi Level Leave workflow in ESS MSS
Hi Guys,
This is the first time I am working with ESS MSS and I have to implement 2 level workflow for leave, I have gone through lot of threads and concluded that i have to enhance class CL_PT_REQ_WF_ATTRIBS
with new method where I have to change the status back to SENT after first level of approval and create new background task and attach it to custom workflow which is copy of standard.
Now my problem is I have enhanced the class CL_PT_REQ_WF_ATTRIBS with new method change status but when I am creating the task I canu2019t see that method in drop down list of methods.
Any idea why it not showing.
We are on ECC6. EH4
Atul
Edited by: Atul Dhariwal on Mar 8, 2011 4:56 AMHi Atul
You are doing wrong way. You need to use BADI to enhance that for that goto SE18 search with PT_GEN* and get the BADI name and goto se19 and create a implementation for that there you in the desiered method you can code. But remember you cannot add you own need method the BADI. What ever SAP is providing that one only you can use to add additional code not addding new method.
Regards
Vijay
Maybe you are looking for
-
View custom payslip using the standard webdynpro application in ESS
Dear All, We want to display a custom developed payslip in the Salary Statement webdynpro application in the ESS. Our Custom Payslip gets called from a custom program. Can anyone please let us know how to call this program from the standard webdynpro
-
Looking for an example from app gallery that uses WAAD for identity
I'm looking for an example from the app gallery (http://azure.microsoft.com/en-us/gallery/active-directory/) that uses WAAD for identity. I need one the show our business what the process would look like for an organization signing up for a SaaS offe
-
Best Export / Video settings for Premiere Pro. Help Needed.
What's the best settings when you want to export a video from Premiere Pro for the web or otherwise. Best settings = good quality video and LOW file size. Benchmark : The videos on Apple Trailers. Check them out at http://www.apple.com/trailers The t
-
Changing resolution settings in OfficeJet
Hi everyone. I'm scanning a few old family pictures, size is approximately 5x3 inch. The scanned picture I get is very small, 900x600 give or take. I need to print those pictures in a photobook and this size is way too small. Is there a way to get bi
-
My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.