EPDFview broken after update to gnutls
This has actually been the case for a little while, I just failed to realize it as I dont use a pdfviewer that often. I went to open epdfview, nothing happened, and so I launched it via terminal which spit out:
epdfview: error while loading shared libraries: libgnutls.so.26: cannot open shared object file: No such file or directory
I downgraded from gnutls 3.0.1-1 to 3.0.0-2, and it gave me the same message. After downgrading to 2.8.6-1, epdfview works fine. I went ahead and reinstalled 3.0.1-1 and tried to build epdfview via ABS, but it failed out mentioning libgnutls.so.26 during makepkg. I wanted to post here and see if Im missing something dumb before I file a bug report.. It seems to me that epdfview is the package at fault yes?
Any ideas?
Had the same problem. I had to force cups to reinstall to solve this, there were a lot of errors:
pacman -S cups
<snip>
cups: /usr/share/man/man5/printers.conf.5.gz exists in filesystem
cups: /usr/share/man/man5/subscriptions.conf.5.gz exists in filesystem
cups: /usr/share/man/man7/backend.7.gz exists in filesystem
cups: /usr/share/man/man7/filter.7.gz exists in filesystem
cups: /usr/share/man/man7/notifier.7.gz exists in filesystem
cups: /usr/share/man/man8/accept.8.gz exists in filesystem
cups: /usr/share/man/man8/cups-deviced.8.gz exists in filesystem
cups: /usr/share/man/man8/cups-driverd.8.gz exists in filesystem
cups: /usr/share/man/man8/cups-lpd.8.gz exists in filesystem
cups: /usr/share/man/man8/cups-polld.8.gz exists in filesystem
cups: /usr/share/man/man8/cupsaccept.8.gz exists in filesystem
cups: /usr/share/man/man8/cupsaddsmb.8.gz exists in filesystem
cups: /usr/share/man/man8/cupsctl.8.gz exists in filesystem
cups: /usr/share/man/man8/cupsd.8.gz exists in filesystem
cups: /usr/share/man/man8/cupsdisable.8.gz exists in filesystem
cups: /usr/share/man/man8/cupsenable.8.gz exists in filesystem
cups: /usr/share/man/man8/cupsfilter.8.gz exists in filesystem
cups: /usr/share/man/man8/cupsreject.8.gz exists in filesystem
cups: /usr/share/man/man8/lpadmin.8.gz exists in filesystem
cups: /usr/share/man/man8/lpc.8.gz exists in filesystem
cups: /usr/share/man/man8/lpinfo.8.gz exists in filesystem
cups: /usr/share/man/man8/lpmove.8.gz exists in filesystem
cups: /usr/share/man/man8/reject.8.gz exists in filesystem
Errors occurred, no packages were upgraded.
Pacman reported cups was not installed, even though I know it is, so the only option left was to force the install, now everything is working again.
Last edited by MW (2011-08-27 12:54:40)
Similar Messages
-
Hi folks,
Note: I've found a way to post images... here they are...
[http://i1087.photobucket.com/albums/j480/_Melk_/iGoogle_Firefox_broken2.png iGoogle Firefox Broken (same in version 5.x, 6.x & 7.x)]
[http://i1087.photobucket.com/albums/j480/_Melk_/iGoogle_IE9_Working.png iGoogle Firefox IE9 Working (was like this on FF too before last update)]
This is a good one so bear with me, I'll try to be as precise as I can.
I updated FF to 6.0.2 yesterday and since then iGoogle (and perhaps other pages.. not sure on this) does not display correctly anymore.
Most evident is the fact that the links "Advanced Search" and "Language Tools" shown (usually) on the right side of the search edit box, don't show up anymore.
Other changes are the graphics which are used by the gadgets. In IE9 & FF before the update, each gadget showed round corners, not anymore in FF after update. Also, if I try to change the theme, the buttons "Add This" don't show up in FF now.
Now, here's the kicker! I completely removed Firefox from my system, meaning uninstalled it using the remove settings as well. I also deleted my profile folder & the Mozilla Firefox folder after the uninstall. Then I reinstalled version FIVE (5.0) to see if I could revert to the why things were back then, and behold, same problem!! So now, I can't repair my firefox to work properly even if I return to older versions!? wow
Tried system restore to a few days ago, that didn't fix it.
Tried version 5.x, 6.x and even the beta 7.x (all from scratch after uninstalling and deleting the profile folder + program files(x86) Mozilla folder) --- still NO FIX! ack! ;)
Frankly, I'm at my wits end on this one. I usually can repair pretty much anything computer/OS related, but this one has me stumped.
Thanks in advance for ANY help provided.. much appreciated :)
/cheers
P.S. I also tried safe mode (took the broken FF picture in Safe Mode), but it has the same issues. In other words, I'm now officially unable to have ANY version of Firefox display iGoogle correctly anymore (5.x, 6.x, even beta 7.x). Be it bare bone, with or without addons, etc etc. All this caused by updating to 6.0.2 from 6.0.1.
Note that I've done tons of updates before without any issues. Also been using FF for the last 6+ years I think (been a while ;) )Turns out that it's iGoogle Styling that has changed! Not a Firefox bug (although there are bugs in the new iGoogle).
The changes to my homepage (iGoogle) happened just as I was updating 6.0.2. So this led me to believe it was a Firefox bug, and since IE9 still shows the OLD style on iGoogle, it reinforced this belief.
After reading up on it on the Google forums, and chatting with a great tech support on Mozilla tech, I realized it wasn't Firefox. So you can dismiss this as a human error ;)
/cheers -
App Store broken after updates
OSX 10.9.5, App Store Version 1.3 (201.7)
After updating some software, the App Store broke, looks like the CSS is not loading. Furthermore, "Some updates could not be installed automatically" - the App Store icon shows "1" in red circle, in it the Update part also shows "1", but clicking on Updates icon displays nothing.
I've sign out of App Store, and after than i cannot sign in back (connection failed).
Also, the suport page in safari looks broken too:
Please advise
MarcinFollowing the updating of a number of iPad apps on my MacBook Pro today (April 18) I had EXACTLY the same problems occur as mzagor described in an earlier post. Everything seems identical in my screen displays to the screen shots shared by mzagor, with the addition in my case of the iTunes Store not loading and throwing up error message windows stating that, "iTunes can't verify the identity of the server "init.itunes.apple.com". The certificate for this server is invalid. ..." 7 additional similar certificates follow as iTunes attempts to log in to other Apple servers.
I spent over an hour on the phone with an Apple tech, not knowing that others were having a similar issue as I. We almost got to the point of reinstalling Mavericks - but I balked at that. The well meaning tech suggested that this could be a hardware issue and that I should have the computer checked at an Apple Store (90 minutes away).
HOWEVER! on this same MacBook Pro, I can, using a DIFFERENT User login (which had been previously created) successfully log into;
- the iTunes Store,
- the App Store, and get to
- the Apple web site Support section through Safari,
without any issues or error messages and with the each of the screen displays showing up as they should. I can log into my Apple ID account without issue.
It would appear that there is a connection to the stated difficulties I am experiencing, with the act of updating apps using the App Store in Mavericks (v10.9.5)
Hopefully, the issue will be acknowledged and a solution will be found and shared quickly. -
Parental Controls Broken After Updating an Application
I'm using Parental Controls (remotely) under 10.5.4 to manage what applications can be opened in a small lab. This works well until I need to update an application on the lab computers. I'll use Firefox as an example, but this happens with all applications.
- I have a version of Firefox on all lab computers (3.0) and Firefox is allowed under parental controls. Everything works.
- I update Firefox to 3.0.1. (In this case, I simply overwrote the older version of firefox, but I get this problem when updating applications with installers.)
- If I remotely look at the Parental Controls settings for the lab computer, I can see that Firefox is still allowed (checked)
- Now, on the lab computer, I log into the managed account and try to open Firefox, I get a warning about the application not being on the allowed list.
- I log out of the lab computer, and again, access the parental controls setting remotely. Now Firefox is Not Allowed (unchecked).
- I check the box to allow Firefox
- Now when I log into the managed account, the new version of Firefox opens.
Some fixex / workarounds I have tried:
- After updating Firefox, I remotely accessed the parental controls settings and first disallowed (unchecked) Firefox, close parental controls, reopened it, and then allowed (checked) Firefox. When logged into the managed account, opening Firefox produced the not allowed error. When I return to the Parental Controls settings, Firefox is now Not Allowed (unchecked). Checking the box to allow Firefox fix the error.
- I've tried restarting after updating Firefox and it did not work.
My guess:
I assume that Leopard keeps a list of applications and versions installed on the computer. Parental Controls allows a specific combination and any update will break the parental controls. To allow this updated application to be opened, its old entry in the list must be updated to reflect the new version. The only way I have figured out how to do this, is to try and open the updated application and fail. Then I can finally allow the updated version.
Does anyone know of an automated or scritable way to do this. I have tried working with lsregister, but have not had any success. I need a way to force Leopard to reload / refresh its list of installed applications, with having a user logged into the console.
For a different solution, does if you can send a UNIX command to machine sitting on it login screen, that will cause the machine to login as a local console user. I could then send "open /path/to/updated app" and a logout to force the application list to be refreshed.
Many Thanks in advance for any help.Hi! Did you ever receive any feedback on this issue?
I am interested since I have noticed the exact same frustration with Parental Controls since updating to 10.5.
While a very good idea, I think the parental controls, especially with respect to permissions about applications is utterly useless at the moment. It is completely stupid that I have to reset the permissions for applications each and every time I update an application. I have three children who use the computer and I don't want them using every bit of software on the eMac. They are naturally curious and will click on programs that can do damage without realizing is.
I have also turned off any parental controls regarding web browsing but my children still hit many sites that are blocked by Parental Controls. I do have a linux gateway that does the filtering quicker and better.
If anyone at Apple is listening ... please spend some time to fix this for the next update.
Thank you. -
Multiseat with Lightdm broken after updating Mesa
Hi,
I've been using a multiseat configuration for months now, and it was working almost perfectly (almost - multiseating is far from being really stable yet IMHO, but anyway).
I updated mesa-libgl a few days ago and confirmed packages replacement, but right after rebooting my second seat didn't work anymore. The display stays black and no login screen shows up, although I suppose a signal is still sent as the monitor doesn't go into sleep mode. The first seat on the other side is working as usual, no difference noted.
In the processes, I can only see one Xorg instance (used by the first seat), when I'm supposed to have tow instances, one for each seat and with different parameters. It's like the second seat is crashing, but I can see no trace of such crash in the logs (kernel.log or everything.log). Even the Xorg.1.log contains all the informations as if the display was running fine.
The day after updating Mesa, I also updated Lightdm but it didn't change anything (I had a brief hope for a moment).
My configuration is the following :
- Nvidia GTX 760: used on seat0 as dual-head with Nouveau driver (Layout-Main in Xorg)
- Intel GMA: used on seat1 on single-head with Intel driver (Layout-Aux in Xorg)
I'm using Lightdm with this configuration:
[LightDM]
minimum-vt=1
run-directory=/run/lightdm
[SeatDefaults]
greeter-session=lightdm-gtk-greeter
greeter-show-manual-login=true
session-wrapper=/etc/lightdm/Xsession
greeter-setup-script=/usr/bin/numlockx on
[Seat:0]
xserver-command=/usr/bin/X :0 -sharevts
xserver-layout=Layout-Main
[Seat:1]
xserver-command=/usr/bin/X :1 -sharevts -novtswitch
xserver-layout=Layout-Aux
The Xorg configuration for the seats is divided into two files:
/etc/X11/xorg.conf.d/50-serverlayout-main.conf
Section "ServerLayout"
Identifier "Layout-Main"
Screen "Screen-Main" 0 0
InputDevice "Logitech-Illuminated" "CoreKeyboard"
InputDevice "Logitech-G100S" "CorePointer"
Option "AllowEmptyInput" "true"
EndSection
Section "InputDevice"
Identifier "Logitech-G100S"
Driver "evdev"
Option "Protocol" "auto"
Option "Device" "/dev/input/by-id/usb-Logitech_G100s_Optical_Gaming_Mouse-event-mouse"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "InputDevice"
Identifier "Logitech-Illuminated"
Driver "evdev"
Option "XkbLayout" "fr"
Option "XkbModel" "pc104"
Option "Device" "/dev/input/by-id/usb-Logitech_Logitech_Illuminated_Keyboard-event-kbd"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "Samsung SyncMaster 2433"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 60.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Samsung"
ModelName "Samsung SyncMaster 2333sw"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA-GTX760"
Driver "nouveau"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 760"
EndSection
Section "Screen"
Identifier "Screen-Main"
Device "NVIDIA-GTX760"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/etc/X11/xorg.conf.d/51-serverlayout-aux.conf
Section "ServerLayout"
Identifier "Layout-Aux"
Screen "Screen-Aux" 0 0
InputDevice "K400r-keyboard" "CoreKeyboard"
InputDevice "K400r-keyboard-multimedia" "SendCoreEvents"
InputDevice "K400r-mouse" "CorePointer"
Option "AllowEmptyInput" "true"
EndSection
Section "InputDevice"
Identifier "K400r-mouse"
Driver "evdev"
Option "Protocol" "auto"
Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-mouse"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "InputDevice"
Identifier "K400r-keyboard"
Driver "evdev"
Option "XkbLayout" "fr"
Option "XkbModel" "pc104"
Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "InputDevice"
Identifier "K400r-keyboard-multimedia"
Driver "evdev"
Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse"
Option "XkbModel" "evdev"
Option "GrabDevice" "on"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Compaq"
ModelName "Compaq Q2159"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Intel-I915"
Driver "intel"
VendorName "Intel"
BoardName "Intel IGP"
BusID "PCI:0:2:0"
# Option "NoAccel" "True"
# Option "DRI" "False"
# Option "TearFree" "true"
# Option "AccelMethod" "sna"
EndSection
Section "Screen"
Identifier "Screen-Aux"
Device "Intel-I915"
Monitor "Monitor1"
DefaultDepth 24
EndSection
When I disable the primary seat configuration in Xorg files (I just prevent the file from being loaded), and after I restart Lightm via
# systemctl restart lightdm
the display shows up correctly on the secondary seat (and not on the primary, which is logical so far). So in the end it seems I just cannot have both seat running at the same time, but individually they work fine.
My logical assumption is that the recent upgrade of the Mesa packages somehow broke this configuration, but I cannot find why and how.
FYI, here's what I tried:
- play with Intel drivers options in Xorg (NoAccel, DRI, ...)
- play with Xorg options on the command line of each seat (-sharevts, -novtswitch)
- switch to Nvidia proprietary drivers (but here also, only the primary seat works, but that may be for a totally different reason, which is why I used Nouveau ever since I set up this configuration)
Here are the Xorg log files:
Xorg.0.log
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 6.853] X Protocol Version 11, Revision 0
[ 6.853] Build Operating System: Linux 3.16.1-1-ARCH x86_64
[ 6.853] Current Operating System: Linux leto 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
[ 6.854] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=83e16b30-5b35-4b15-9bce-5ec87c00d46d rw quiet
[ 6.854] Build Date: 21 September 2014 10:53:13AM
[ 6.854]
[ 6.854] Current version of pixman: 0.32.6
[ 6.854] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.854] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.854] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 3 23:21:15 2014
[ 6.855] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 6.855] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.857] (==) ServerLayout "Layout-Main"
[ 6.857] (**) |-->Screen "Screen-Main" (0)
[ 6.857] (**) | |-->Monitor "Monitor0"
[ 6.857] (**) | |-->Device "NVIDIA-GTX760"
[ 6.857] (**) |-->Input Device "Logitech-Illuminated"
[ 6.857] (**) |-->Input Device "Logitech-G100S"
[ 6.857] (==) Automatically adding devices
[ 6.857] (==) Automatically enabling devices
[ 6.857] (==) Automatically adding GPU devices
[ 6.858] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 6.858] Entry deleted from font path.
[ 6.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 6.860] Entry deleted from font path.
[ 6.860] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 6.860] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 6.860] Entry deleted from font path.
[ 6.860] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 6.860] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 6.860] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.860] (II) Loader magic: 0x818d80
[ 6.860] (II) Module ABI versions:
[ 6.860] X.Org ANSI C Emulation: 0.4
[ 6.860] X.Org Video Driver: 18.0
[ 6.860] X.Org XInput driver : 21.0
[ 6.860] X.Org Server Extension : 8.0
[ 6.861] (EE) systemd-logind: failed to get session: PID 656 does not belong to any known session
[ 6.861] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6.861] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 6.862] (--) PCI: (0:0:2:0) 8086:0412:1458:d000 rev 6, Mem @ 0xdb400000/4194304, 0xc0000000/268435456, I/O @ 0x0000f000/64
[ 6.862] (--) PCI:*(0:1:0:0) 10de:1187:1462:2848 rev 161, Mem @ 0xda000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 6.862] (II) Open ACPI successful (/var/run/acpid.socket)
[ 6.862] (II) LoadModule: "glx"
[ 6.863] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.873] (II) Module glx: vendor="X.Org Foundation"
[ 6.873] compiled for 1.16.1, module version = 1.0.0
[ 6.873] ABI class: X.Org Server Extension, version 8.0
[ 6.873] (==) AIGLX enabled
[ 6.873] (II) LoadModule: "nouveau"
[ 6.874] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 6.875] (II) Module nouveau: vendor="X.Org Foundation"
[ 6.875] compiled for 1.16.1, module version = 1.0.11
[ 6.875] Module class: X.Org Video Driver
[ 6.875] ABI class: X.Org Video Driver, version 18.0
[ 6.875] (II) LoadModule: "evdev"
[ 6.875] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.877] (II) Module evdev: vendor="X.Org Foundation"
[ 6.877] compiled for 1.16.0, module version = 2.9.0
[ 6.877] Module class: X.Org XInput Driver
[ 6.877] ABI class: X.Org XInput driver, version 21.0
[ 6.877] (II) NOUVEAU driver
[ 6.877] (II) NOUVEAU driver for NVIDIA chipset families :
[ 6.877] RIVA TNT (NV04)
[ 6.877] RIVA TNT2 (NV05)
[ 6.877] GeForce 256 (NV10)
[ 6.877] GeForce 2 (NV11, NV15)
[ 6.877] GeForce 4MX (NV17, NV18)
[ 6.877] GeForce 3 (NV20)
[ 6.877] GeForce 4Ti (NV25, NV28)
[ 6.878] GeForce FX (NV3x)
[ 6.878] GeForce 6 (NV4x)
[ 6.878] GeForce 7 (G7x)
[ 6.878] GeForce 8 (G8x)
[ 6.878] GeForce GTX 200 (NVA0)
[ 6.878] GeForce GTX 400 (NVC0)
[ 6.878] (++) using VT number 1
[ 6.878] (II) [drm] nouveau interface version: 1.1.2
[ 6.878] (II) Loading sub module "dri2"
[ 6.878] (II) LoadModule: "dri2"
[ 6.878] (II) Module "dri2" already built-in
[ 6.878] (--) NOUVEAU(0): Chipset: "NVIDIA NVE4"
[ 6.878] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 6.878] (==) NOUVEAU(0): RGB weight 888
[ 6.878] (==) NOUVEAU(0): Default visual is TrueColor
[ 6.878] (==) NOUVEAU(0): Using HW cursor
[ 6.878] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 6.878] (==) NOUVEAU(0): Page flipping enabled
[ 6.878] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 6.878] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 6.878] (II) NOUVEAU(0): Initializing outputs ...
[ 6.935] (II) NOUVEAU(0): Output DVI-I-1 using monitor section Monitor0
[ 6.965] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[ 6.967] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 7.073] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 7.073] (II) NOUVEAU(0): 4 crtcs needed for screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 2 to this screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 3 to this screen.
[ 7.134] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 7.134] (II) NOUVEAU(0): Manufacturer: SAM Model: 5c8 Serial#: 1129132596
[ 7.134] (II) NOUVEAU(0): Year: 2009 Week: 46
[ 7.134] (II) NOUVEAU(0): EDID Version: 1.3
[ 7.134] (II) NOUVEAU(0): Digital Display Input
[ 7.134] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52 vert.: 29
[ 7.134] (II) NOUVEAU(0): Gamma: 2.20
[ 7.134] (II) NOUVEAU(0): DPMS capabilities: Off
[ 7.134] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.134] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 7.134] (II) NOUVEAU(0): redX: 0.647 redY: 0.334 greenX: 0.284 greenY: 0.607
[ 7.134] (II) NOUVEAU(0): blueX: 0.151 blueY: 0.071 whiteX: 0.312 whiteY: 0.329
[ 7.134] (II) NOUVEAU(0): Supported established timings:
[ 7.134] (II) NOUVEAU(0): 640x480@60Hz
[ 7.134] (II) NOUVEAU(0): 800x600@56Hz
[ 7.134] (II) NOUVEAU(0): 800x600@60Hz
[ 7.134] (II) NOUVEAU(0): 1024x768@60Hz
[ 7.134] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 7.134] (II) NOUVEAU(0): Supported standard timings:
[ 7.134] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 7.134] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 7.134] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 7.134] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 7.134] (II) NOUVEAU(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 7.134] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 7.134] (II) NOUVEAU(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 7.134] (II) NOUVEAU(0): Monitor name: SyncMaster
[ 7.134] (II) NOUVEAU(0): Serial No: H9XSB06266
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 7.134] (II) NOUVEAU(0): Number of EDID sections to follow: 1
[ 7.134] (II) NOUVEAU(0): EDID (in hex):
[ 7.134] (II) NOUVEAU(0): 00ffffffffffff004c2dc80534324d43
[ 7.134] (II) NOUVEAU(0): 2e13010380341d782aeed1a555489b26
[ 7.134] (II) NOUVEAU(0): 1250542308008100814081809500a940
[ 7.134] (II) NOUVEAU(0): b30001010101023a801871382d40582c
[ 7.134] (II) NOUVEAU(0): 450009252100001e000000fd00383c1e
[ 7.134] (II) NOUVEAU(0): 5111000a202020202020000000fc0053
[ 7.134] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
[ 7.134] (II) NOUVEAU(0): 00483958534230363236360a20200111
[ 7.134] (II) NOUVEAU(0): 02010400023a80d072382d40102c4580
[ 7.134] (II) NOUVEAU(0): 09252100001e011d007251d01e206e28
[ 7.134] (II) NOUVEAU(0): 550009252100001e011d00bc52d01e20
[ 7.134] (II) NOUVEAU(0): b828554009252100001e8c0ad0902040
[ 7.134] (II) NOUVEAU(0): 31200c4055000925210000188c0ad08a
[ 7.134] (II) NOUVEAU(0): 20e02d10103e96000925210000180000
[ 7.134] (II) NOUVEAU(0): 00000000000000000000000000000000
[ 7.134] (II) NOUVEAU(0): 0000000000000000000000000000005e
[ 7.134] (II) NOUVEAU(0): Not using mode "1920x1080" (vrefresh out of range)
[ 7.134] (II) NOUVEAU(0): Not using mode "1280x720" (vrefresh out of range)
[ 7.134] (II) NOUVEAU(0): Not using mode "720x576" (vrefresh out of range)
[ 7.134] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 7.134] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 7.134] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.164] (II) NOUVEAU(0): EDID for output DVI-D-1
[ 7.164] (II) NOUVEAU(0): Manufacturer: SAM Model: 4de Serial#: 1129132595
[ 7.164] (II) NOUVEAU(0): Year: 2009 Week: 6
[ 7.164] (II) NOUVEAU(0): EDID Version: 1.3
[ 7.164] (II) NOUVEAU(0): Digital Display Input
[ 7.164] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 7.164] (II) NOUVEAU(0): Gamma: 2.20
[ 7.164] (II) NOUVEAU(0): DPMS capabilities: Off
[ 7.164] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.164] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 7.164] (II) NOUVEAU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 7.164] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 7.164] (II) NOUVEAU(0): Supported established timings:
[ 7.164] (II) NOUVEAU(0): 640x480@60Hz
[ 7.164] (II) NOUVEAU(0): 800x600@56Hz
[ 7.164] (II) NOUVEAU(0): 800x600@60Hz
[ 7.164] (II) NOUVEAU(0): 1024x768@60Hz
[ 7.164] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 7.164] (II) NOUVEAU(0): Supported standard timings:
[ 7.164] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 7.164] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 7.164] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 7.164] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 7.164] (II) NOUVEAU(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 7.164] (II) NOUVEAU(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 7.164] (II) NOUVEAU(0): Supported detailed timing:
[ 7.164] (II) NOUVEAU(0): clock: 138.5 MHz Image Size: 477 x 268 mm
[ 7.164] (II) NOUVEAU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 7.164] (II) NOUVEAU(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 7.164] (II) NOUVEAU(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 75 kHz, PixClock max 175 MHz
[ 7.164] (II) NOUVEAU(0): Monitor name: SyncMaster
[ 7.164] (II) NOUVEAU(0): Serial No: H9XS201897
[ 7.164] (II) NOUVEAU(0): EDID (in hex):
[ 7.164] (II) NOUVEAU(0): 00ffffffffffff004c2dde0433324d43
[ 7.164] (II) NOUVEAU(0): 0613010380331d782aee91a3544c9926
[ 7.164] (II) NOUVEAU(0): 0f50542308008100814081809500b300
[ 7.164] (II) NOUVEAU(0): a940010101011a3680a070381f403020
[ 7.164] (II) NOUVEAU(0): 3500dd0c1100001a000000fd00383d1e
[ 7.164] (II) NOUVEAU(0): 4b11000a202020202020000000fc0053
[ 7.164] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
[ 7.164] (II) NOUVEAU(0): 00483958533230313839370a2020008b
[ 7.164] (II) NOUVEAU(0): Printing probed modes for output DVI-D-1
[ 7.164] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 7.164] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.166] (II) NOUVEAU(0): EDID for output HDMI-1
[ 7.270] (II) NOUVEAU(0): EDID for output DP-1
[ 7.270] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 7.270] (II) NOUVEAU(0): Output DVI-D-1 connected
[ 7.270] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 7.270] (II) NOUVEAU(0): Output DP-1 disconnected
[ 7.270] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 7.270] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[ 7.270] (II) NOUVEAU(0): Output DVI-D-1 using initial mode 1920x1080
[ 7.270] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7.270] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[ 7.270] (**) NOUVEAU(0): Driver mode "1920x1080": 138.5 MHz (scaled from 0.0 MHz), 66.6 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 7.270] (**) NOUVEAU(0): Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.270] (==) NOUVEAU(0): DPI set to (96, 96)
[ 7.270] (II) Loading sub module "fb"
[ 7.270] (II) LoadModule: "fb"
[ 7.270] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.272] (II) Module fb: vendor="X.Org Foundation"
[ 7.272] compiled for 1.16.1, module version = 1.0.0
[ 7.272] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.272] (II) Loading sub module "shadowfb"
[ 7.272] (II) LoadModule: "shadowfb"
[ 7.272] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 7.272] (II) Module shadowfb: vendor="X.Org Foundation"
[ 7.272] compiled for 1.16.1, module version = 1.0.0
[ 7.272] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.272] (--) Depth 24 pixmap format is 32 bpp
[ 7.278] (II) NOUVEAU(0): Channel setup complete.
[ 7.279] (II) NOUVEAU(0): [COPY] async initialised.
[ 7.280] (II) NOUVEAU(0): [DRI2] Setup complete
[ 7.280] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 7.280] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 7.281] (II) Loading sub module "exa"
[ 7.281] (II) LoadModule: "exa"
[ 7.281] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 7.281] (II) Module exa: vendor="X.Org Foundation"
[ 7.281] compiled for 1.16.1, module version = 2.6.0
[ 7.281] ABI class: X.Org Video Driver, version 18.0
[ 7.281] (II) EXA(0): Driver allocated offscreen pixmaps
[ 7.281] (II) EXA(0): Driver registered support for the following operations:
[ 7.281] (II) Solid
[ 7.281] (II) Copy
[ 7.281] (II) Composite (RENDER acceleration)
[ 7.281] (II) UploadToScreen
[ 7.281] (II) DownloadFromScreen
[ 7.281] (==) NOUVEAU(0): Backing store enabled
[ 7.281] (==) NOUVEAU(0): Silken mouse enabled
[ 7.282] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 7.282] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 7.282] (**) NOUVEAU(0): DPMS enabled
[ 7.282] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7.282] (--) RandR disabled
[ 7.363] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7.363] (II) AIGLX: enabled GLX_ARB_create_context
[ 7.363] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 7.363] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 7.363] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7.363] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7.363] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 7.363] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 7.363] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7.363] (II) AIGLX: Loaded and initialized nouveau
[ 7.363] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7.365] (II) NOUVEAU(0): NVEnterVT is called.
[ 7.420] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[ 7.420] resize called 1920 1080
[ 7.445] (II) Using input driver 'evdev' for 'Logitech-Illuminated'
[ 7.445] (**) Option "CoreKeyboard"
[ 7.445] (**) Logitech-Illuminated: always reports core events
[ 7.445] (**) evdev: Logitech-Illuminated: Device: "/dev/input/by-id/usb-Logitech_Logitech_Illuminated_Keyboard-event-kbd"
[ 7.503] (--) evdev: Logitech-Illuminated: Vendor 0x46d Product 0xc318
[ 7.503] (--) evdev: Logitech-Illuminated: Found keys
[ 7.503] (II) evdev: Logitech-Illuminated: Configuring as keyboard
[ 7.503] (II) XINPUT: Adding extended input device "Logitech-Illuminated" (type: KEYBOARD, id 6)
[ 7.503] (**) Option "xkb_rules" "evdev"
[ 7.503] (**) Option "xkb_model" "pc104"
[ 7.503] (**) Option "xkb_layout" "fr"
[ 7.513] (II) Using input driver 'evdev' for 'Logitech-G100S'
[ 7.513] (**) Option "CorePointer"
[ 7.513] (**) Logitech-G100S: always reports core events
[ 7.513] (**) evdev: Logitech-G100S: Device: "/dev/input/by-id/usb-Logitech_G100s_Optical_Gaming_Mouse-event-mouse"
[ 7.583] (--) evdev: Logitech-G100S: Vendor 0x46d Product 0xc247
[ 7.583] (--) evdev: Logitech-G100S: Found 12 mouse buttons
[ 7.583] (--) evdev: Logitech-G100S: Found scroll wheel(s)
[ 7.583] (--) evdev: Logitech-G100S: Found relative axes
[ 7.583] (--) evdev: Logitech-G100S: Found x and y relative axes
[ 7.583] (II) evdev: Logitech-G100S: Configuring as mouse
[ 7.583] (II) evdev: Logitech-G100S: Adding scrollwheel support
[ 7.583] (**) Option "Emulate3Buttons" "no"
[ 7.583] (**) evdev: Logitech-G100S: YAxisMapping: buttons 4 and 5
[ 7.583] (**) evdev: Logitech-G100S: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.583] (II) XINPUT: Adding extended input device "Logitech-G100S" (type: MOUSE, id 7)
[ 7.583] (II) evdev: Logitech-G100S: initialized for relative axes.
[ 7.583] (**) Logitech-G100S: (accel) keeping acceleration scheme 1
[ 7.583] (**) Logitech-G100S: (accel) acceleration profile 0
[ 7.583] (**) Logitech-G100S: (accel) acceleration factor: 2.000
[ 7.583] (**) Logitech-G100S: (accel) acceleration threshold: 4
[ 7.584] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "system-keyboard"
[ 7.584] (II) Using input driver 'evdev' for 'Power Button'
[ 7.584] (**) Power Button: always reports core events
[ 7.584] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 7.584] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.584] (--) evdev: Power Button: Found keys
[ 7.584] (II) evdev: Power Button: Configuring as keyboard
[ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 7.584] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 7.584] (**) Option "xkb_rules" "evdev"
[ 7.584] (**) Option "xkb_model" "pc104"
[ 7.584] (**) Option "xkb_layout" "fr"
[ 7.584] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 7.584] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Video Bus: Applying InputClass "system-keyboard"
[ 7.584] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.584] (**) Video Bus: always reports core events
[ 7.584] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 7.584] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.584] (--) evdev: Video Bus: Found keys
[ 7.584] (II) evdev: Video Bus: Configuring as keyboard
[ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event11"
[ 7.584] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 7.584] (**) Option "xkb_rules" "evdev"
[ 7.584] (**) Option "xkb_model" "pc104"
[ 7.584] (**) Option "xkb_layout" "fr"
[ 7.584] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "system-keyboard"
[ 7.584] (II) Using input driver 'evdev' for 'Power Button'
[ 7.584] (**) Power Button: always reports core events
[ 7.584] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 7.584] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.584] (--) evdev: Power Button: Found keys
[ 7.584] (II) evdev: Power Button: Configuring as keyboard
[ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[ 7.584] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[ 7.584] (**) Option "xkb_rules" "evdev"
[ 7.584] (**) Option "xkb_model" "pc104"
[ 7.584] (**) Option "xkb_layout" "fr"
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event18)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/event23)
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 7.585] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 7.585] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/event23"
[ 7.585] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Vendor 0x46d Product 0xc52b
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found 20 mouse buttons
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found scroll wheel(s)
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found relative axes
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found x and y relative axes
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found absolute axes
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Forcing absolute x/y axes to exist.
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found keys
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Configuring as mouse
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Configuring as keyboard
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Adding scrollwheel support
[ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: YAxisMapping: buttons 4 and 5
[ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.586] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1:1.2/0003:046D:C52B.0006/0003:046D:C52B.0008/input/input26/event23"
[ 7.586] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4024" (type: KEYBOARD, id 11)
[ 7.586] (**) Option "xkb_rules" "evdev"
[ 7.586] (**) Option "xkb_model" "pc104"
[ 7.586] (**) Option "xkb_layout" "fr"
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: initialized for relative axes.
[ 7.586] (WW) evdev: Logitech Unifying Device. Wireless PID:4024: ignoring absolute axes.
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) keeping acceleration scheme 1
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration profile 0
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration factor: 2.000
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration threshold: 4
[ 7.586] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/mouse1)
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 7.586] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/mouse1"
[ 7.586] (EE) evdev: Logitech Unifying Device. Wireless PID:4024: Unable to query fd: Inappropriate ioctl for device
[ 7.630] (EE) PreInit returned 2 for "Logitech Unifying Device. Wireless PID:4024"
[ 7.630] (II) UnloadModule: "evdev"
[ 7.630] (II) config/udev: Adding input device HD Webcam C525 (/dev/input/event25)
[ 7.630] (**) HD Webcam C525: Applying InputClass "evdev keyboard catchall"
[ 7.630] (**) HD Webcam C525: Applying InputClass "evdev keyboard catchall"
[ 7.630] (**) HD Webcam C525: Applying InputClass "system-keyboard"
[ 7.630] (II) Using input driver 'evdev' for 'HD Webcam C525'
[ 7.630] (**) HD Webcam C525: always reports core events
[ 7.630] (**) evdev: HD Webcam C525: Device: "/dev/input/event25"
[ 7.630] (--) evdev: HD Webcam C525: Vendor 0x46d Product 0x826
[ 7.630] (--) evdev: HD Webcam C525: Found keys
[ 7.630] (II) evdev: HD Webcam C525: Configuring as keyboard
[ 7.630] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2.1/1-11.2.1:1.2/input/input28/event25"
[ 7.630] (II) XINPUT: Adding extended input device "HD Webcam C525" (type: KEYBOARD, id 12)
[ 7.630] (**) Option "xkb_rules" "evdev"
[ 7.630] (**) Option "xkb_model" "pc104"
[ 7.630] (**) Option "xkb_layout" "fr"
[ 7.630] (II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/event24)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.630] (II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/js1)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.630] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/event22)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.630] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/js0)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.631] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event19)
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "system-keyboard"
[ 7.631] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 7.631] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event19"
[ 7.631] (WW) evdev: Logitech Logitech Illuminated Keyboard: device file is duplicate. Ignoring.
[ 7.663] (EE) PreInit returned 8 for "Logitech Logitech Illuminated Keyboard"
[ 7.663] (II) UnloadModule: "evdev"
[ 7.663] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event20)
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "system-keyboard"
[ 7.663] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event20"
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found relative axes
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing relative x/y axes to exist.
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found absolute axes
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing absolute x/y axes to exist.
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as mouse
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
[ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
[ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.663] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/0003:046D:C318.0002/input/input23/event20"
[ 7.663] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 13)
[ 7.663] (**) Option "xkb_rules" "evdev"
[ 7.663] (**) Option "xkb_model" "pc104"
[ 7.663] (**) Option "xkb_layout" "fr"
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: initialized for relative axes.
[ 7.663] (WW) evdev: Logitech Logitech Illuminated Keyboard: ignoring absolute axes.
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
[ 7.663] (II) config/udev: Adding input device Logitech G100s Optical Gaming Mouse (/dev/input/event21)
[ 7.663] (**) Logitech G100s Optical Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 7.663] (**) Logitech G100s Optical Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 7.664] (II) Using input driver 'evdev' for 'Logitech G100s Optical Gaming Mouse'
[ 7.664] (**) Logitech G100s Optical Gaming Mouse: always reports core events
[ 7.664] (**) evdev: Logitech G100s Optical Gaming Mouse: Device: "/dev/input/event21"
[ 7.664] (WW) evdev: Logitech G100s Optical Gaming Mouse: device file is duplicate. Ignoring.
[ 7.690] (EE) PreInit returned 8 for "Logitech G100s Optical Gaming Mouse"
[ 7.690] (II) UnloadModule: "evdev"
[ 7.690] (II) config/udev: Adding input device Logitech G100s Optical Gaming Mouse (/dev/input/mouse0)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event7)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event8)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event4)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event5)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.691] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 7.691] (II) No input driver specified, ignoring this device.
[ 7.691] (II) This device may have been added with another device file.
[ 14.821] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 14.821] (II) NOUVEAU(0): Using hsync ranges from config file
[ 14.821] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 14.821] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 14.821] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 14.821] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 14.963] resize called 3840 1080
[ 15.466] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 15.466] (II) NOUVEAU(0): Using hsync ranges from config file
[ 15.466] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 15.466] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15.466] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 15.466] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 15.747] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 15.747] (II) NOUVEAU(0): Using hsync ranges from config file
[ 15.747] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 15.747] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15.747] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 15.747] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 15.947] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 15.947] (II) NOUVEAU(0): Using hsync ranges from config file
[ 15.947] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 15.947] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15.947] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 15.947] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 16.180] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 16.180] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.180] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.180] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.180] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 16.180] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 16.398] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 16.398] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.398] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.398] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.398] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 16.398] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 16.705] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 16.705] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.705] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.705] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.705] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 16.705] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 3613.510] (II) config/udev: removing device Logitech Unifying Device. Wireless PID:4024
[ 3613.557] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Close
[ 3613.557] (II) UnloadModule: "evdev"
[ 3613.617] (II) config/udev: removing device HD Webcam C525
[ 3613.647] (II) evdev: HD Webcam C525: Close
[ 3613.647] (II) UnloadModule: "evdev"
[ 3614.988] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/js0)
[ 3614.988] (II) No input driver specified, ignoring this device.
[ 3614.988] (II) This device may have been added with another device file.
[ 3614.988] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/event23)
[ 3614.988] (II) No input driver specified, ignoring this device.
[ 3614.988] (II) This device may have been added with another device file.
[ 3614.989] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/mouse1)
[ 3614.989] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 3614.989] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 3614.989] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 3614.989] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/mouse1"
[ 3614.989] (EE) evdev: Logitech Unifying Device. Wireless PID:4024: Unable to query fd: Inappropriate ioctl for device
[ 3615.023] (EE) PreInit returned 2 for "Logitech Unifying Device. Wireless PID:4024"
[ 3615.023] (II) UnloadModule: "evdev"
[ 3615.023] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/event22)
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 3615.023] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 3615.023] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/event22"
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Vendor 0x46d Product 0xc52b
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found 20 mouse buttons
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found scroll wheel(s)
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found relative axes
[ 3615.02shillshocked wrote:Since version 1.12, LightDM now relies on systemd-logind for seat
management. It means LightDM van load seats automatically as they are added
from logind.
Ha! I searched something like that during my investigations, I was wondering if it wasn't about the recent logind changes, but I gave up due to the lack of documentation -
HAL seems to have broken after update. (SOLVED)
I'm not sure what happened, but after updating arch recently CD's, DVD's, and USB drives/sticks are not available. They "seem" to mount themselves as before, as they show up in gnome, but they are inacessible, clicking on any icon for them brings nothing up.
Sorry for the cryptic nature of this post, I'm not even sure where to begin looking in the logs for whatever error/warning might point me in the right direction. Can someone kindly tell me what I should be checking to resolve this? Thanks!
Last edited by jeremyrainman (2009-04-18 15:32:26)Using a:
$ hald --daemon=no --verbose=yes
I get lots and lots and lots of verbage. HAL is running fine apparently, as it's monitoring my UPS just fine
Here's what I get when I try to open a USB drive that is attached and has an icon in gnome:
08:06:21.680 [W] ci-tracker.c:366: Error doing GetSessionForUnixProcess on ConsoleKit: org.freedesktop.ConsoleKit.Manager.GeneralError: Unable to lookup session information for process '9060'
08:06:21.680 [i] hald_dbus.c:5176: OK for method 'Mount' with signature 'ssas' on interface 'org.freedesktop.Hal.Device.Volume' for UDI '/org/freedesktop/Hal/devices/volume_uuid_9C24133024130CC0' and execpath 'hal-storage-mount'
08:06:21.680 [i] hald_dbus.c:4062: no need to enqueue
Run started hal-storage-mount (0) (1)
! full path is '/usr/lib/hal/hal-storage-mount', program_dir is '/usr/lib/hal'
9061: XYA attempting to get lock on /media/.hal-mtab-lock
9061: XYA got lock on /media/.hal-mtab-lock
device = /dev/sdb1
invoked by uid = 1000
invoked by system bus connection = :1.193
label 'FreeAgent Drive' uuid '9C24133024130CC0'
Looking at /etc/fstab entry 'none'
/etc/fstab: device none -> none
Looking at /etc/fstab entry 'none'
/etc/fstab: device none -> none
Looking at /etc/fstab entry '/dev/cdrom'
/etc/fstab: device /dev/cdrom -> /dev/dev/cd/cdrom-6:0:0:0
Looking at /etc/fstab entry '/dev/dvd'
/etc/fstab: device /dev/dvd -> /dev/dev/cd/dvd-6:0:0:0
Looking at /etc/fstab entry '/dev/fd0'
/etc/fstab: device /dev/fd0 -> /dev/fd0
Looking at /etc/fstab entry '/dev/sda1'
/etc/fstab: device /dev/sda1 -> /dev/sda1
Looking at /etc/fstab entry '/dev/sda2'
/etc/fstab: device /dev/sda2 -> /dev/sda2
Looking at /etc/fstab entry '/dev/sda3'
/etc/fstab: device /dev/sda3 -> /dev/sda3
mount_point = 'FreeAgent Drive'
mount_fstype = ''
mount_options = 'locale=LC_CTYPE=en_US.utf8;LC_NUMERIC=en_US.utf8;LC_TIME=en_US.utf8;LC_COLLATE=C;LC_MONETARY=en_US.utf8;LC_MESSAGES=en_US.utf8;LC_PAPER=en_US.utf8;LC_NAME=en_US.utf8;LC_ADDRESS=en_US.utf8;LC_TELEPHONE=en_US.utf8;LC_MEASUREMENT=en_US.utf8;LC_IDENTIFICATION=en_US.utf8 '
trying dir /media/FreeAgent Drive
given_options[0] = 'locale=LC_CTYPE=en_US.utf8;LC_NUMERIC=en_US.utf8;LC_TIME=en_US.utf8;LC_COLLATE=C;LC_MONETARY=en_US.utf8;LC_MESSAGES=en_US.utf8;LC_PAPER=en_US.utf8;LC_NAME=en_US.utf8;LC_ADDRESS=en_US.utf8;LC_TELEPHONE=en_US.utf8;LC_MEASUREMENT=en_US.utf8;LC_IDENTIFICATION=en_US.utf8'
allowed_options[0] = 'locale='
allowed_options[1] = 'dmask='
allowed_options[2] = 'fmask='
allowed_options[3] = 'ro'
allowed_options[4] = 'sync'
allowed_options[5] = 'dirsync'
allowed_options[6] = 'noatime'
allowed_options[7] = 'nodiratime'
allowed_options[8] = 'noexec'
allowed_options[9] = 'quiet'
allowed_options[10] = 'remount'
allowed_options[11] = 'exec'
using action org.freedesktop.hal.storage.mount-removable for uid 1000, system_bus_connection :1.193
08:06:21.695 [i] device.c:1894: Removing locks from ':1.195'
08:06:21.695 [i] device.c:1894: Removing locks from ':1.194'
pid 9061: rc=1 signaled=0: /usr/lib/hal/hal-storage-mount
08:06:21.696 [i] hald_dbus.c:4086: No more methods in queue
08:06:21.696 [i] hald_dbus.c:4149: failed with 'org.freedesktop.Hal.Device.PermissionDeniedByPolicy' 'org.freedesktop.hal.storage.mount-removable no <-- (action, result)'
08:06:21.696 [D] hotplug.c:453: events queued = 0, events in progress = 0
08:06:21.696 [D] hotplug.c:458: Hotplug-queue empty now ... no hotplug events in progress
08:06:21.784 [i] device.c:1894: Removing locks from ':1.197'
08:06:21.788 [i] ci-tracker.c:212: Removing CICallerInfo object for :1.193
08:06:21.788 [i] device.c:1894: Removing locks from ':1.193'
[9056]: 08:06:25.013 [i] addon-storage.c:354: Checking whether device /dev/sr0 is locked on HAL
[9056]: 08:06:25.013 [i] addon-storage.c:362: ... device /dev/sr0 is not locked on HAL
08:06:51.791 [i] device.c:1894: Removing locks from ':1.196'
I tried looking up org.freedesktop.Hal.Device.PermissionDeniedByPolicy and couldn't find anything. Any suggestions? -
Transforms-Scale is broken after update?
My half finished masterpiece suddenly does not work after updating to 1.1. The scaling of polygons using Transforms-Scale just does nothing.
Is it possible something changed in the update or did my cat walk on the keyboard when i wasn't looking?Below is the class Hexagon (which I wrote)
and below that a typical instantiation
The scale and position are now (after update) as if the instantiation has a scale of 1
There are many other examples of Hexagon{}. They all now appear with a scale and position as if scale = 1.
I hope this is enough for you to get an idea.
public class Hexagon extends CustomNode {
public var p1x : Number;
public var p1y : Number;
public var strkcol : Color;
public var rotangle : Number;
public var scaler : Number;
public var StW : Number;
public var ColorIndex : Integer on replace {ColorChanger(ColorIndex)};
var p2x = p1x - 43;
var p3x = p1x + 43;
var p2y = p1y + 25;
var p3y = p1y + 75;
var p4y = p1y + 100;
var cy = p1y + 50;
bound function ColorChanger ( I : Integer) : Color {
if (I == 0)
then {
Color.LIGHTGREY
else {
if (I == 1)
then {
Main.PickedColor1
else {
if (I == 2)
then {
Main.PickedColor2
else {
if (I == 3)
then {
Main.PickedColor3
else { // I is 4
Main.PickedColor4
public override function create(): Node {
return Group {
content: [
Polygon {
points: [ p1x,p1y, p3x,p2y, p3x,p3y, p1x,p4y, p2x,p3y, p2x,p2y ];
fill: bind ColorChanger(ColorIndex);
stroke: strkcol
strokeWidth: StW
transforms: Rotate {
pivotX: p1x,
pivotY: cy,
angle: rotangle
transforms: Scale{
x: scaler,
y: scaler
hexone = Hexagon {
p1x: BigHexX
p1y: 30
ColorIndex: 1
rotangle: 0
scaler: 1.5
cursor: Cursor.HAND
onMouseClicked: function( e: MouseEvent ):Void {
colorpicker1.visible = not colorpicker1.visible;
HexagonNumber = 1;
}; -
AAC Encoder Broken After Update to Quicktime 7.6
I have iTunes 7.3.1.3 and Quicktime 7.3.1.70.
After updating Quicktime to 7.60.92.0 every thing seemed fine. However, trying to import songs using the AAC encoder causes an error: "The current encoder settings for bit rate and sample rate are not valid for this file".
I can import songs using the other encoders just fine; it's just the AAC encoder that doesn't work. In fact, converting any existing library tracks with the AAC encoder causes this error - not just new new tracks.
After a little web searching I found others with the same problem after updating to Quicktime 7.6.
So I uninstalled Quicktime 7.6 and reinstalled Quicktime 7.3. Problem solved.
Anyone else have this issue, especially updating to Quicktime 7.6 only with an earlier version of iTunes?
I have never had an issue updating Quicktime separately from iTunes before.
At this time I do not want the aggravation of updating iTunes too.Does it have to do with the fact that I installed quicktime 7 when I already had the 10.6.3 update?
Yes. Install the update again or this software.
(51962) -
Paste from illustrator now broken after update
after the latest update of Pages 08, i can no longer paste symbols from Illustrator CS. certain parts of the symbols are broken up after Pages gives me an error message reading: The media can't be used because you don't have access privileges, because it has no content or is corrupt.
worked fine last week.
thanks,
ericSee this discussion to see if it helps. iPhone 4 Message:SIM Required (in phone that has no SIM card slot) While it was originally for the iPhone 4, I have seen a couple of Verizon 4s customers also post. You will need to contact Apple back, however their support line, and escalate the call to a Senior Engineer to get assistance.
-
[Solved] System completely broken after update
Today while updating my system as usual something went south terribly fast
Here's the pacman log of the update
[2009-07-09 12:14] synchronizing package lists
[2009-07-09 12:14] starting full system upgrade
[2009-07-09 12:18] upgraded kernel-headers (2.6.29.3-1 -> 2.6.30.1-1)
[2009-07-09 12:18] upgraded glibc (2.10.1-2 -> 2.10.1-3)
[2009-07-09 12:18] upgraded binutils (2.19.1-4 -> 2.19.1-5)
[2009-07-09 12:18] upgraded gcc-libs (4.4.0-4 -> 4.4.0-5)
[2009-07-09 12:18] upgraded gcc (4.4.0-4 -> 4.4.0-5)
[2009-07-09 12:18] upgraded libtool (2.2.6a-1 -> 2.2.6a-2)
[2009-07-09 12:18] upgraded medit (0.9.4-7 -> 0.9.4-8)
[2009-07-09 12:18] upgraded mercurial (1.3-2 -> 1.3-3)
[2009-07-09 12:18] upgraded sed (4.2-1 -> 4.2.1-1)
If I remember correctly the kernel-headers upgraded just fine, then with glibc something went wrong, I saw an error for glibc and some of the following packages that said something like:
"error: scriptlet failed to execute correctly"
After this the system became unresponsive and I could not even switch to to any consoles and I had to turn the pc off by force.
Trying to reboot is not an option as it will stop with a kernel panic with the error just before saying:
"kinit: /sbin/init: No such file or directory"
The file is there, I have confirmed it with an install image, I have tried (pacman -r) to try to reinstall some of the packages but it didn't work. I have also tried (pacman -r -Sy base) and that fails too with the scriptlet error.
This goes beyond what I can fix myself, any help solving this will be greatly appreciated.
Edit:
Fixed typos.
I have also tried to chroot into the partition but it doesn't work complaining it can't find /bin/bash (which is there also).
Meanwhile I have also tried to remove all base packages and reinstall them but it doesn't work too, the same scriptlet error, a clean install on another disk does work fine but I would like to avoid reinstalling everything again.
Edit 2:
Solved by reinstalling, couldn't afford to wait too long before finding a solution.
Last edited by R00KIE (2009-07-10 08:35:26)Can't you installing anything ? it hears very badly
pacman -Qo /sbin/init
/sbin/init is owned by sysvinit-mod 2.86-2
If any better idea, than install a working toolchain with manually, copy the binary of them to the desired /bin /sbin, etc.. library. -
[SOLVED]Fn keys broken after update
Hi,
After a system upgrade the fn keys controlling the keyboard backlight don't work. Other fn keys work fine
Update log:
[2013-09-20 17:55] [PACMAN] starting full system upgrade
[2013-09-20 17:58] [PACMAN] upgraded dbus (1.6.12-1 -> 1.6.14-1)
[2013-09-20 17:58] [ALPM] warning: /etc/systemd/logind.conf installed as /etc/systemd/logind.conf.pacnew
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> systemd 205 restructures the cgroup hierarchy and changes internal
[2013-09-20 17:58] [ALPM-SCRIPTLET] protocols. You should reboot at your earliest convenience.
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> The "timestamp" hook for mkinitcpio no longer exists. If you used
[2013-09-20 17:58] [ALPM-SCRIPTLET] this hook, you must remove it from /etc/mkinitcpio.conf. A "systemd"
[2013-09-20 17:58] [ALPM-SCRIPTLET] hook has been added which provides this functionality, and more.
[2013-09-20 17:58] [PACMAN] upgraded systemd (204-3 -> 207-3)
[2013-09-20 17:58] [PACMAN] upgraded bluez-utils (5.7-1 -> 5.8-1)
[2013-09-20 17:58] [PACMAN] upgraded cogl (1.14.0-4 -> 1.14.0-5)
[2013-09-20 17:58] [PACMAN] upgraded empathy (3.8.3-1 -> 3.8.4-1)
[2013-09-20 17:58] [PACMAN] upgraded firefox (23.0.1-1 -> 24.0-1)
[2013-09-20 17:58] [ALPM-SCRIPTLET] Generating locales...
[2013-09-20 17:58] [ALPM-SCRIPTLET] el_GR.UTF-8... done
[2013-09-20 17:58] [ALPM-SCRIPTLET] en_US.UTF-8... done
[2013-09-20 17:58] [ALPM-SCRIPTLET] Generation complete.
[2013-09-20 17:58] [PACMAN] upgraded glibc (2.18-3 -> 2.18-4)
[2013-09-20 17:58] [PACMAN] upgraded gmime (2.6.17-1 -> 2.6.18-1)
[2013-09-20 17:58] [PACMAN] upgraded gnome-desktop (1:3.8.3-2 -> 1:3.8.4-1)
[2013-09-20 17:58] [PACMAN] upgraded gnome-color-manager (3.8.2-1 -> 3.8.3-1)
[2013-09-20 17:58] [PACMAN] upgraded gnome-settings-daemon (3.8.4-2 -> 3.8.5-1)
[2013-09-20 17:58] [PACMAN] upgraded gnome-control-center (3.8.4.1-2 -> 3.8.5-1)
[2013-09-20 17:58] [PACMAN] upgraded gnome-shell-extensions (3.8.3.1-2 -> 3.8.4-1)
[2013-09-20 17:58] [PACMAN] upgraded gnome-themes-standard (3.8.3-1 -> 3.8.4-1)
[2013-09-20 17:58] [PACMAN] upgraded graphviz (2.32.0-1 -> 2.32.0-2)
[2013-09-20 17:58] [PACMAN] upgraded icedtea-web-java7 (1.4-2 -> 1.4.1-1)
[2013-09-20 17:58] [PACMAN] upgraded lib32-glibc (2.18-3 -> 2.18-4)
[2013-09-20 17:58] [PACMAN] upgraded libpng (1.6.3-1 -> 1.6.5-1)
[2013-09-20 17:58] [PACMAN] upgraded lib32-libpng (1.6.3-1 -> 1.6.5-1)
[2013-09-20 17:58] [PACMAN] upgraded libusbx (1.0.16-2 -> 1.0.17-1)
[2013-09-20 17:58] [PACMAN] upgraded linux-firmware (20130725-1 -> 20130903-1)
[2013-09-20 17:58] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-09-20 17:58] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> Starting build: 3.11.1-1-ARCH
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> Starting build: 3.11.1-1-ARCH
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-20 17:58] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-20 17:58] [PACMAN] upgraded linux (3.10.10-1 -> 3.11.1-1)
[2013-09-20 17:58] [PACMAN] upgraded orc (0.4.17-1 -> 0.4.18-1)
[2013-09-20 17:58] [ALPM-SCRIPTLET]
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> The file /etc/sysctl.conf has been removed from this
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> package, as all its settings are now kernel defaults.
[2013-09-20 17:58] [ALPM-SCRIPTLET]
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> If you had customized it, you need to rename it as
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> /etc/sysctl.d/99-sysctl.conf since from version 207 on
[2013-09-20 17:58] [ALPM-SCRIPTLET] ==> systemd only applies settings from /etc/sysctl.d/* .
[2013-09-20 17:58] [ALPM-SCRIPTLET]
[2013-09-20 17:58] [PACMAN] upgraded procps-ng (3.3.8-2 -> 3.3.8-3)
[2013-09-20 17:58] [PACMAN] upgraded raptor (2.0.9-2 -> 2.0.10-2)
[2013-09-20 17:58] [PACMAN] upgraded systemd-sysvcompat (204-3 -> 207-3)
[2013-09-20 17:58] [PACMAN] upgraded tali (3.8.0-1 -> 3.8.1-1)
[2013-09-20 17:58] [PACMAN] upgraded transmission-gtk (2.81-1 -> 2.82-1)
[2013-09-20 17:58] [PACMAN] upgraded udisks2 (2.1.0-3 -> 2.1.1-1)
[2013-09-20 17:58] [ALPM-SCRIPTLET] In order to use the new version, reload all virtualbox modules manually.
[2013-09-20 17:58] [PACMAN] upgraded virtualbox-host-modules (4.2.18-1 -> 4.2.18-3)
[2013-09-20 17:58] [PACMAN] upgraded xorg-xinput (1.6.0-1 -> 1.6.1-1)
[2013-09-20 17:58] [PACMAN] upgraded xvidcore (1.3.2-1 -> 1.3.2-2)
and Dmesg
[ 1053.214014] atkbd serio0: Unknown key pressed (translated set 2, code 0x97 on isa0060/serio0).
[ 1053.214022] atkbd serio0: Use 'setkeycodes e017 <keycode>' to make it known.
[ 1053.455447] atkbd serio0: Unknown key pressed (translated set 2, code 0x96 on isa0060/serio0).
[ 1053.455455] atkbd serio0: Use 'setkeycodes e016 <keycode>' to make it known.
I can see what the issue is (somehow the update broke the keyboard "hooks"), but don't know how to fix it cleanly (with what to "hook" the keys).
Seems like a silly situation, so i start the thread in the newbies section.
thanks in advance
Last edited by mpir (2013-09-25 18:12:08)Solution:
prerequisites: xorg-xev
i) get the keyodes with dmesg | tail {i used the eXX number, not the hex}
ii) test the scancode to keycode binding using
setkeycodes [scancode_you_found] [keycode]
and then
xev
. You want your key to show up as "XF86KbdBrightnessUp/Down", my keycodes were 229 and 230
iii) make the change permanant by:
creating a new service
/etc/systemd/system/setkeycodes.service
[Unit]
Description=Change keycodes at boot
[Service]
Type=oneshot
ExecStart=/usr/bin/setkeycodes [scancode] [keycode]
ExecStart=/usr/bin/setkeycodes [scancode] [keycode]
[Install]
WantedBy=multi-user.target
and enabling the service
systemctl enable setkeycodes
cheers -
Pulse audio broken after update.
I've got arch 64bit latest.
AMD 8120
16gb of RAM
I've ran pacman -Syu and it seemed to have updated pulseaudio or something related, however now pulse isn't working.
This is the report from pulseaudio -v
slimg00dy@Myhouse etc]$ pulseaudio --start
E: [pulseaudio] main.c: Daemon startup failed.
[slimg00dy@Myhouse etc]$ pulseaudio -v
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
E: [pulseaudio] core-util.c: Failed to connect to system bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory
I: [pulseaudio] core-util.c: Successfully acquired nice level -10, which is lower than the requested -11.
I: [pulseaudio] main.c: This is PulseAudio 3.0
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is 80c5ab0ccbc74d529807bc81b57d5a46.
I: [pulseaudio] main.c: Using runtime directory /home/slimg00dy/.config/pulse/80c5ab0ccbc74d529807bc81b57d5a46-runtime.
I: [pulseaudio] main.c: Using state directory /home/slimg00dy/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-3.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 MMXEXT
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/slimg00dy/.config/pulse/80c5ab0ccbc74d529807bc81b57d5a46-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/slimg00dy/.config/pulse/80c5ab0ccbc74d529807bc81b57d5a46-stream-volumes'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/slimg00dy/.config/pulse/80c5ab0ccbc74d529807bc81b57d5a46-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA NVidia/HDA NVidia.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA NVidia
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA NVidia use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA NVidia
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:1.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_01_00.1.hdmi-stereo.
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "3"
I: [pulseaudio] sink.c: alsa.card = "1"
I: [pulseaudio] sink.c: alsa.card_name = "HDA NVidia"
I: [pulseaudio] sink.c: alsa.long_card_name = "HDA NVidia at 0xfbffc000 irq 19"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "10de"
I: [pulseaudio] sink.c: device.vendor.name = "NVIDIA Corporation"
I: [pulseaudio] sink.c: device.product.id = "0e0a"
I: [pulseaudio] sink.c: device.product.name = "GK104 HDMI Audio Controller"
I: [pulseaudio] sink.c: device.string = "hdmi:1"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: device.description = "GK104 HDMI Audio Controller Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: alsa.mixer_name = "Nvidia GPU 40 HDMI/DP"
I: [pulseaudio] sink.c: alsa.components = "HDA:10de0040,10de1000,00100100"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of GK104 HDMI Audio Controller Digital Stereo (HDMI)"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "1"
I: [pulseaudio] source.c: alsa.card_name = "HDA NVidia"
I: [pulseaudio] source.c: alsa.long_card_name = "HDA NVidia at 0xfbffc000 irq 19"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "10de"
I: [pulseaudio] source.c: device.vendor.name = "NVIDIA Corporation"
I: [pulseaudio] source.c: device.product.id = "0e0a"
I: [pulseaudio] source.c: device.product.name = "GK104 HDMI Audio Controller"
I: [pulseaudio] source.c: device.string = "1"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
I: [alsa-sink] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink] alsa-sink.c: Starting playback.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #4; argument: "device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1 (alsa_card.pci-0000_01_00.1) module loaded.
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/Logitech USB Headset/Logitech USB Headset.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card Logitech USB Headset
I: [pulseaudio] (alsa-lib)main.c: error: failed to import Logitech USB Headset use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card Logitech USB Headset
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:2'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D999c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:2'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:2'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround40:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround41:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround50:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround51:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D999p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:2
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.usb-Logitech_Logitech_USB_Headset-00-Headset.
I: [pulseaudio] card.c: Created 1 "alsa_card.usb-Logitech_Logitech_USB_Headset-00-Headset"
I: [pulseaudio] alsa-util.c: cannot disable ALSA period wakeups
I: [pulseaudio] alsa-util.c: ALSA period wakeups were not disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device front:2.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:2'
I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restored volume: 0: 105% 1: 105%
I: [pulseaudio] sink.c: Created sink 1 "alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "USB Audio"
I: [pulseaudio] sink.c: alsa.id = "USB Audio"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "0"
I: [pulseaudio] sink.c: alsa.card = "2"
I: [pulseaudio] sink.c: alsa.card_name = "Logitech USB Headset"
I: [pulseaudio] sink.c: alsa.long_card_name = "Logitech Logitech USB Headset at usb-0000:00:13.0-2, full speed"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:00:13.0-usb-0:2:1.0"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/sound/card2"
I: [pulseaudio] sink.c: udev.id = "usb-Logitech_Logitech_USB_Headset-00-Headset"
I: [pulseaudio] sink.c: device.bus = "usb"
I: [pulseaudio] sink.c: device.vendor.id = "046d"
I: [pulseaudio] sink.c: device.vendor.name = "Logitech, Inc."
I: [pulseaudio] sink.c: device.product.id = "0a0c"
I: [pulseaudio] sink.c: device.product.name = "Clear Chat Comfort USB Headset"
I: [pulseaudio] sink.c: device.serial = "Logitech_Logitech_USB_Headset"
I: [pulseaudio] sink.c: device.form_factor = "headset"
I: [pulseaudio] sink.c: device.string = "front:2"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352800"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "176400"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "analog-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] sink.c: device.description = "Clear Chat Comfort USB Headset Analog Stereo"
I: [pulseaudio] sink.c: alsa.mixer_name = "USB Mixer"
I: [pulseaudio] sink.c: alsa.components = "USB046d:0a0c"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-headset-usb"
I: [pulseaudio] sink.c: device.intended_roles = "phone"
I: [pulseaudio] source.c: Created source 1 "alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Clear Chat Comfort USB Headset Analog Stereo"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "2"
I: [pulseaudio] source.c: alsa.card_name = "Logitech USB Headset"
I: [pulseaudio] source.c: alsa.long_card_name = "Logitech Logitech USB Headset at usb-0000:00:13.0-2, full speed"
I: [pulseaudio] source.c: alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:13.0-usb-0:2:1.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/sound/card2"
I: [pulseaudio] source.c: udev.id = "usb-Logitech_Logitech_USB_Headset-00-Headset"
I: [pulseaudio] source.c: device.bus = "usb"
I: [pulseaudio] source.c: device.vendor.id = "046d"
I: [pulseaudio] source.c: device.vendor.name = "Logitech, Inc."
I: [pulseaudio] source.c: device.product.id = "0a0c"
I: [pulseaudio] source.c: device.product.name = "Clear Chat Comfort USB Headset"
I: [pulseaudio] source.c: device.serial = "Logitech_Logitech_USB_Headset"
I: [pulseaudio] source.c: device.form_factor = "headset"
I: [pulseaudio] source.c: device.string = "2"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-headset-usb"
I: [pulseaudio] source.c: device.intended_roles = "phone"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -41.00 dB to 3.00 dB.
I: [pulseaudio] alsa-sink.c: Fixing base volume to -3.00 dB
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-sink.c: Using hardware mute control.
I: [alsa-sink] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink] alsa-sink.c: Starting playback.
I: [pulseaudio] alsa-util.c: cannot disable ALSA period wakeups
I: [pulseaudio] alsa-util.c: ALSA period wakeups were not disabled
I: [pulseaudio] alsa-source.c: Successfully opened device hw:2.
I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Mono' (analog-mono).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:2'
I: [pulseaudio] module-device-restore.c: Restoring port for source source:alsa_input.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-mono.
I: [pulseaudio] source.c: Created source 2 "alsa_input.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-mono" with sample spec s16le 1ch 44100Hz and channel map mono
I: [pulseaudio] source.c: alsa.resolution_bits = "16"
I: [pulseaudio] source.c: device.api = "alsa"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: alsa.class = "generic"
I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
I: [pulseaudio] source.c: alsa.name = "USB Audio"
I: [pulseaudio] source.c: alsa.id = "USB Audio"
I: [pulseaudio] source.c: alsa.subdevice = "0"
I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c: alsa.device = "0"
I: [pulseaudio] source.c: alsa.card = "2"
I: [pulseaudio] source.c: alsa.card_name = "Logitech USB Headset"
I: [pulseaudio] source.c: alsa.long_card_name = "Logitech Logitech USB Headset at usb-0000:00:13.0-2, full speed"
I: [pulseaudio] source.c: alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:13.0-usb-0:2:1.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/sound/card2"
I: [pulseaudio] source.c: udev.id = "usb-Logitech_Logitech_USB_Headset-00-Headset"
I: [pulseaudio] source.c: device.bus = "usb"
I: [pulseaudio] source.c: device.vendor.id = "046d"
I: [pulseaudio] source.c: device.vendor.name = "Logitech, Inc."
I: [pulseaudio] source.c: device.product.id = "0a0c"
I: [pulseaudio] source.c: device.product.name = "Clear Chat Comfort USB Headset"
I: [pulseaudio] source.c: device.serial = "Logitech_Logitech_USB_Headset"
I: [pulseaudio] source.c: device.form_factor = "headset"
I: [pulseaudio] source.c: device.string = "hw:2"
I: [pulseaudio] source.c: device.buffering.buffer_size = "176400"
I: [pulseaudio] source.c: device.buffering.fragment_size = "88200"
I: [pulseaudio] source.c: device.access_mode = "mmap+timer"
I: [pulseaudio] source.c: device.profile.name = "analog-mono"
I: [pulseaudio] source.c: device.profile.description = "Analog Mono"
I: [pulseaudio] source.c: device.description = "Clear Chat Comfort USB Headset Analog Mono"
I: [pulseaudio] source.c: alsa.mixer_name = "USB Mixer"
I: [pulseaudio] source.c: alsa.components = "USB046d:0a0c"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-headset-usb"
I: [pulseaudio] source.c: device.intended_roles = "phone"
I: [pulseaudio] alsa-source.c: Using 2.0 fragments of size 88200 bytes (1000.00ms), buffer size is 176400 bytes (2000.00ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 40.00ms
I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-source.c: Hardware volume ranges from 16.00 dB to 29.00 dB.
I: [pulseaudio] alsa-source.c: Fixing base volume to -29.00 dB
I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-source.c: Using hardware mute control.
I: [alsa-source] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #5; argument: "device_id="2" name="usb-Logitech_Logitech_USB_Headset-00-Headset" card_name="alsa_card.usb-Logitech_Logitech_USB_Headset-00-Headset" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/sound/card2 (alsa_card.usb-Logitech_Logitech_USB_Headset-00-Headset) module loaded.
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/Plantronics Wireless Audio/Plantronics Wireless Audio.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card Plantronics Wireless Audio
I: [pulseaudio] (alsa-lib)main.c: error: failed to import Plantronics Wireless Audio use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card Plantronics Wireless Audio
I: [pulseaudio] alsa-util.c: Device hw:3 doesn't support 44100 Hz, changed to 16000 Hz.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:3'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:front:3: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:3: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:3: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC3D999c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:3: No such file or directory
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:3: Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:3'
I: [pulseaudio] alsa-util.c: Device hw:3 doesn't support 44100 Hz, changed to 16000 Hz.
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround40:3: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround41:3: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround50:3: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround51:3: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:3: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC3D999p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:3: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:3
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:3: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:3
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:3: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:3
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=3,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:3: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio.
I: [pulseaudio] card.c: Created 2 "alsa_card.usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio"
I: [pulseaudio] alsa-util.c: cannot disable ALSA period wakeups
I: [pulseaudio] alsa-util.c: ALSA period wakeups were not disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device front:3.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:3'
I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restored volume: 0: 74% 1: 74%
I: [pulseaudio] sink.c: Created sink 2 "alsa_output.usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "USB Audio"
I: [pulseaudio] sink.c: alsa.id = "USB Audio"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "0"
I: [pulseaudio] sink.c: alsa.card = "3"
I: [pulseaudio] sink.c: alsa.card_name = "Plantronics Wireless Audio"
I: [pulseaudio] sink.c: alsa.long_card_name = "Plantronics Wireless Audio Plantronics Wireless Audio at usb-0000:00:13.2-3.2,"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:00:13.2-usb-0:3.2:1.0"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:13.2/usb10/10-3/10-3.2/10-3.2:1.0/sound/card3"
I: [pulseaudio] sink.c: udev.id = "usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio"
I: [pulseaudio] sink.c: device.bus = "usb"
I: [pulseaudio] sink.c: device.vendor.id = "047f"
I: [pulseaudio] sink.c: device.vendor.name = "Plantronics, Inc."
I: [pulseaudio] sink.c: device.product.id = "d955"
I: [pulseaudio] sink.c: device.product.name = "Plantronics Wireless Audio"
I: [pulseaudio] sink.c: device.serial = "Plantronics_Wireless_Audio_Plantronics_Wireless_Audio"
I: [pulseaudio] sink.c: device.string = "front:3"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352800"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "176400"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "analog-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] sink.c: device.description = "Plantronics Wireless Audio Analog Stereo"
I: [pulseaudio] sink.c: alsa.mixer_name = "USB Mixer"
I: [pulseaudio] sink.c: alsa.components = "USB047f:d955"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-usb"
I: [pulseaudio] source.c: Created source 3 "alsa_output.usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Plantronics Wireless Audio Analog Stereo"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "3"
I: [pulseaudio] source.c: alsa.card_name = "Plantronics Wireless Audio"
I: [pulseaudio] source.c: alsa.long_card_name = "Plantronics Wireless Audio Plantronics Wireless Audio at usb-0000:00:13.2-3.2,"
I: [pulseaudio] source.c: alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:13.2-usb-0:3.2:1.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:13.2/usb10/10-3/10-3.2/10-3.2:1.0/sound/card3"
I: [pulseaudio] source.c: udev.id = "usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio"
I: [pulseaudio] source.c: device.bus = "usb"
I: [pulseaudio] source.c: device.vendor.id = "047f"
I: [pulseaudio] source.c: device.vendor.name = "Plantronics, Inc."
I: [pulseaudio] source.c: device.product.id = "d955"
I: [pulseaudio] source.c: device.product.name = "Plantronics Wireless Audio"
I: [pulseaudio] source.c: device.serial = "Plantronics_Wireless_Audio_Plantronics_Wireless_Audio"
I: [pulseaudio] source.c: device.string = "3"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-usb"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -46.00 dB to -12.00 dB.
I: [pulseaudio] alsa-sink.c: Fixing base volume to 12.00 dB
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-sink.c: Using hardware mute control.
I: [alsa-sink] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink] alsa-sink.c: Starting playback.
I: [pulseaudio] alsa-util.c: cannot disable ALSA period wakeups
I: [pulseaudio] alsa-util.c: Device hw:3 doesn't support 44100 Hz, changed to 16000 Hz.
I: [pulseaudio] alsa-util.c: ALSA period wakeups were not disabled
I: [pulseaudio] alsa-source.c: Successfully opened device hw:3.
I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Mono' (analog-mono).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:3'
I: [pulseaudio] module-device-restore.c: Restoring port for source source:alsa_input.usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio.analog-mono.
I: [pulseaudio] source.c: Created source 4 "alsa_input.usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio.analog-mono" with sample spec s16le 1ch 16000Hz and channel map mono
I: [pulseaudio] source.c: alsa.resolution_bits = "16"
I: [pulseaudio] source.c: device.api = "alsa"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: alsa.class = "generic"
I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
I: [pulseaudio] source.c: alsa.name = "USB Audio"
I: [pulseaudio] source.c: alsa.id = "USB Audio"
I: [pulseaudio] source.c: alsa.subdevice = "0"
I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c: alsa.device = "0"
I: [pulseaudio] source.c: alsa.card = "3"
I: [pulseaudio] source.c: alsa.card_name = "Plantronics Wireless Audio"
I: [pulseaudio] source.c: alsa.long_card_name = "Plantronics Wireless Audio Plantronics Wireless Audio at usb-0000:00:13.2-3.2,"
I: [pulseaudio] source.c: alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:13.2-usb-0:3.2:1.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:13.2/usb10/10-3/10-3.2/10-3.2:1.0/sound/card3"
I: [pulseaudio] source.c: udev.id = "usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio"
I: [pulseaudio] source.c: device.bus = "usb"
I: [pulseaudio] source.c: device.vendor.id = "047f"
I: [pulseaudio] source.c: device.vendor.name = "Plantronics, Inc."
I: [pulseaudio] source.c: device.product.id = "d955"
I: [pulseaudio] source.c: device.product.name = "Plantronics Wireless Audio"
I: [pulseaudio] source.c: device.serial = "Plantronics_Wireless_Audio_Plantronics_Wireless_Audio"
I: [pulseaudio] source.c: device.string = "hw:3"
I: [pulseaudio] source.c: device.buffering.buffer_size = "64000"
I: [pulseaudio] source.c: device.buffering.fragment_size = "32000"
I: [pulseaudio] source.c: device.access_mode = "mmap+timer"
I: [pulseaudio] source.c: device.profile.name = "analog-mono"
I: [pulseaudio] source.c: device.profile.description = "Analog Mono"
I: [pulseaudio] source.c: device.description = "Plantronics Wireless Audio Analog Mono"
I: [pulseaudio] source.c: alsa.mixer_name = "USB Mixer"
I: [pulseaudio] source.c: alsa.components = "USB047f:d955"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-usb"
I: [pulseaudio] alsa-source.c: Using 2.0 fragments of size 32000 bytes (1000.00ms), buffer size is 64000 bytes (2000.00ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 110.25ms
I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-source.c: Hardware volume ranges from -28.00 dB to 0.00 dB.
I: [pulseaudio] alsa-source.c: Fixing base volume to 0.00 dB
I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-source.c: Using hardware mute control.
I: [alsa-source] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="3" name="usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio" card_name="alsa_card.usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:13.2/usb10/10-3/10-3.2/10-3.2:1.0/sound/card3 (alsa_card.usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 4 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #7; argument: "").
I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #8; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #9; argument: "").
E: [pulseaudio] bluetooth-util.c: Failed to get D-Bus connection: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory
E: [pulseaudio] module.c: Failed to load module "module-bluetooth-discover" (argument: ""): initialization failed.
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Failed to initialize daemon.
I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #4).
I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo"
I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor"
I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_01_00.1"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #4).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #5).
I: [pulseaudio] sink.c: Freeing sink 1 "alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo"
I: [pulseaudio] source.c: Freeing source 1 "alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo.monitor"
I: [pulseaudio] source.c: Freeing source 2 "alsa_input.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-mono"
I: [pulseaudio] card.c: Freed 1 "alsa_card.usb-Logitech_Logitech_USB_Headset-00-Headset"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #5).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
I: [pulseaudio] sink.c: Freeing sink 2 "alsa_output.usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio.analog-stereo"
I: [pulseaudio] source.c: Freeing source 3 "alsa_output.usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio.analog-stereo.monitor"
I: [pulseaudio] source.c: Freeing source 4 "alsa_input.usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio.analog-mono"
I: [pulseaudio] card.c: Freed 2 "alsa_card.usb-Plantronics_Wireless_Audio_Plantronics_Wireless_Audio-00-Audio"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #7).
I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #7).
I: [pulseaudio] module.c: Unloading "module-jackdbus-detect" (index: #8).
I: [pulseaudio] module.c: Unloaded "module-jackdbus-detect" (index: #8).
I: [pulseaudio] module.c: Unloading "module-bluetooth-policy" (index: #9).
I: [pulseaudio] module.c: Unloaded "module-bluetooth-policy" (index: #9).
I: [pulseaudio] main.c: Daemon terminated.
[slimg00dy@Myhouse etc]$
/var/log/pacman.log
slimg00dy@Myhouse etc]$ cat /var/log/pacman.log | grep -i '5-11'
[2013-05-11 20:33] [PACMAN] Running 'pacman -Syu'
[2013-05-11 20:33] [PACMAN] synchronizing package lists
[2013-05-11 20:33] [PACMAN] starting full system upgrade
[2013-05-11 20:37] [PACMAN] upgraded libpng (1.5.15-1 -> 1.6.2-3)
[2013-05-11 20:37] [PACMAN] upgraded dbus (1.6.8-6 -> 1.6.10-1)
[2013-05-11 20:37] [PACMAN] upgraded alsa-lib (1.0.27-1 -> 1.0.27-2)
[2013-05-11 20:37] [PACMAN] upgraded qt4 (4.8.4-16 -> 4.8.4-18)
[2013-05-11 20:37] [PACMAN] upgraded libldap (2.4.35-1 -> 2.4.35-2)
[2013-05-11 20:38] [PACMAN] upgraded virtuoso-base (6.1.6-1 -> 6.1.6-2)
[2013-05-11 20:38] [PACMAN] upgraded soprano (2.9.0-2 -> 2.9.2-1)
[2013-05-11 20:38] [PACMAN] upgraded akonadi (1.9.1-3 -> 1.9.2-1)
[2013-05-11 20:38] [ALPM] warning: /usr/lib/avahi/service-types.db installed as /usr/lib/avahi/service-types.db.pacnew
[2013-05-11 20:38] [PACMAN] upgraded avahi (0.6.31-6 -> 0.6.31-7)
[2013-05-11 20:38] [PACMAN] upgraded pixman (0.28.2-1 -> 0.30.0-1)
[2013-05-11 20:38] [PACMAN] upgraded libtirpc (0.2.2-4 -> 0.2.3-1)
[2013-05-11 20:38] [PACMAN] upgraded pam (1.1.6-1 -> 1.1.6-3)
[2013-05-11 20:38] [PACMAN] upgraded util-linux (2.22.2-2 -> 2.23-1)
[2013-05-11 20:38] [PACMAN] upgraded systemd (202-2 -> 203-2)
[2013-05-11 20:38] [PACMAN] upgraded mesa (9.1.1-1 -> 9.1.2-1)
[2013-05-11 20:38] [PACMAN] upgraded cairo (1.12.14-3 -> 1.12.14-4)
[2013-05-11 20:38] [PACMAN] upgraded cairomm (1.10.0-2 -> 1.10.0-3)
[2013-05-11 20:38] [PACMAN] upgraded ucommon (5.5.0-1 -> 6.0.4-1)
[2013-05-11 20:38] [PACMAN] upgraded ccrtp (2.0.3-2 -> 2.0.5-1)
[2013-05-11 20:38] [PACMAN] upgraded nss (3.14.3-2 -> 3.14.3-3)
[2013-05-11 20:38] [PACMAN] upgraded opus (1.0.2-1 -> 1.0.2-2)
[2013-05-11 20:38] [PACMAN] upgraded giflib (4.1.6-5 -> 4.2.1-1)
[2013-05-11 20:38] [PACMAN] upgraded libwebp (0.3.0-1 -> 0.3.0-3)
[2013-05-11 20:38] [PACMAN] upgraded pciutils (3.1.10-1 -> 3.2.0-2)
[2013-05-11 20:38] [PACMAN] upgraded chromium (26.0.1410.63-1 -> 26.0.1410.63-2)
[2013-05-11 20:38] [PACMAN] upgraded lib32-gcc-libs (4.8.0-3 -> 4.8.0-4)
[2013-05-11 20:38] [PACMAN] upgraded gcc-libs-multilib (4.8.0-3 -> 4.8.0-4)
[2013-05-11 20:38] [PACMAN] upgraded gnutls (3.1.10-1 -> 3.1.11-1)
[2013-05-11 20:38] [PACMAN] upgraded libimobiledevice (1.1.4-2 -> 1.1.5-1)
[2013-05-11 20:38] [PACMAN] upgraded upower (0.9.20-1 -> 0.9.20-2)
[2013-05-11 20:38] [ALPM-SCRIPTLET] gtk-update-icon-cache: error while loading shared libraries: libpng15.so.15: cannot open shared object file: No such file or directory
[2013-05-11 20:38] [PACMAN] upgraded gnome-session (3.8.1-1 -> 3.8.1-2)
[2013-05-11 20:38] [ALPM-SCRIPTLET] g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libpng15.so.15: cannot open shared object file: No such file or directory
[2013-05-11 20:38] [PACMAN] upgraded gdk-pixbuf2 (2.28.1-1 -> 2.28.1-2)
[2013-05-11 20:38] [PACMAN] upgraded librsvg (2.37.0-1 -> 2.37.0-2)
[2013-05-11 20:38] [PACMAN] upgraded muffin (1.7.4-1 -> 1.8.0-1)
[2013-05-11 20:38] [PACMAN] upgraded libxml2 (2.8.0-1 -> 2.9.1-1)
[2013-05-11 20:38] [PACMAN] upgraded libxslt (1.1.26-3 -> 1.1.28-1)
[2013-05-11 20:38] [PACMAN] upgraded webkitgtk3 (2.0.1-1 -> 2.0.1-2)
[2013-05-11 20:39] [PACMAN] upgraded cinnamon (1.7.8-1 -> 1.8.2-2)
[2013-05-11 20:39] [PACMAN] upgraded network-manager-applet (0.9.8.0-2 -> 0.9.8.0-3)
[2013-05-11 20:39] [PACMAN] upgraded cinnamon-control-center (1.7.4-1 -> 1.8.0-1)
[2013-05-11 20:39] [PACMAN] upgraded cinnamon-screensaver (1.7.2-1 -> 1.8.0-1)
[2013-05-11 20:39] [PACMAN] upgraded colord (0.1.33-1 -> 0.1.34-1)
[2013-05-11 20:39] [PACMAN] upgraded cryptsetup (1.6.0-1 -> 1.6.1-1)
[2013-05-11 20:39] [PACMAN] upgraded openjpeg (1.5.0-1 -> 1.5.1-1)
[2013-05-11 20:39] [PACMAN] upgraded poppler (0.22.3-2 -> 0.22.3-3)
[2013-05-11 20:39] [PACMAN] upgraded cups-filters (1.0.34-2 -> 1.0.34-3)
[2013-05-11 20:39] [PACMAN] upgraded dhcpcd (5.6.7-1 -> 5.6.8-1)
[2013-05-11 20:39] [PACMAN] upgraded dirmngr (1.1.0-5 -> 1.1.1-1)
[2013-05-11 20:39] [PACMAN] upgraded eina (1.7.5-1 -> 1.7.6-1)
[2013-05-11 20:39] [PACMAN] upgraded eet (1.7.5-1 -> 1.7.6-1)
[2013-05-11 20:39] [PACMAN] upgraded evas_generic_loaders (1.7.5-4 -> 1.7.6-1)
[2013-05-11 20:39] [PACMAN] upgraded evas (1.7.5-1 -> 1.7.6.1-1)
[2013-05-11 20:39] [PACMAN] upgraded ecore (1.7.5-1 -> 1.7.6-1)
[2013-05-11 20:39] [PACMAN] upgraded e_dbus (1.7.5-1 -> 1.7.6-1)
[2013-05-11 20:39] [PACMAN] upgraded eio (1.7.5-1 -> 1.7.6.1-1)
[2013-05-11 20:39] [PACMAN] upgraded embryo (1.7.5-1 -> 1.7.6-1)
[2013-05-11 20:39] [PACMAN] upgraded edje (1.7.5-1 -> 1.7.6-1)
[2013-05-11 20:39] [PACMAN] upgraded eeze (1.7.5-1 -> 1.7.6-1)
[2013-05-11 20:39] [PACMAN] upgraded efreet (1.7.5-1 -> 1.7.6-1)
[2013-05-11 20:39] [PACMAN] upgraded emotion (1.7.5-1 -> 1.7.6-1)
[2013-05-11 20:39] [PACMAN] upgraded ethumb (1.7.5-1 -> 1.7.6-1)
[2013-05-11 20:39] [PACMAN] upgraded elementary (1.7.5-1 -> 1.7.6-1)
[2013-05-11 20:39] [ALPM-SCRIPTLET] Enlightenment is configured to use systemd by default for shutdown/sleep purposes.
[2013-05-11 20:39] [ALPM-SCRIPTLET] This can be changed in /etc/enlightenment/sysactions.conf.
[2013-05-11 20:39] [PACMAN] upgraded enlightenment17 (0.17.1-1 -> 0.17.2.1-1)
[2013-05-11 20:39] [PACMAN] upgraded libvpx (1.1.0-1 -> 1.2.0-1)
[2013-05-11 20:39] [ALPM] warning: /etc/rc_maps.cfg installed as /etc/rc_maps.cfg.pacnew
[2013-05-11 20:39] [PACMAN] upgraded v4l-utils (0.9.3-2 -> 0.9.5-1)
[2013-05-11 20:39] [PACMAN] upgraded ffmpeg (1:1.2-2 -> 1:1.2.1-1)
[2013-05-11 20:39] [PACMAN] upgraded firefox (20.0.1-2 -> 20.0.1-5)
[2013-05-11 20:39] [PACMAN] upgraded libxfce4util (4.10.0-1 -> 4.10.1-1)
[2013-05-11 20:39] [PACMAN] upgraded garcon (0.2.0-1 -> 0.2.1-1)
[2013-05-11 20:39] [PACMAN] upgraded gcc-multilib (4.8.0-3 -> 4.8.0-4)
[2013-05-11 20:40] [PACMAN] upgraded gcr (3.8.1-1 -> 3.8.2-1)
[2013-05-11 20:40] [PACMAN] upgraded gd (2.0.36RC1-5 -> 2.0.36RC1-6)
[2013-05-11 20:40] [PACMAN] upgraded ghostscript (9.07-1 -> 9.07-2)
[2013-05-11 20:40] [PACMAN] upgraded perl-error (0.17019-1 -> 0.17020-1)
[2013-05-11 20:40] [PACMAN] upgraded git (1.8.2.2-1 -> 1.8.2.3-1)
[2013-05-11 20:40] [PACMAN] upgraded glibmm (2.36.1-1 -> 2.36.2-1)
[2013-05-11 20:40] [PACMAN] upgraded libwbclient (4.0.5-1 -> 4.0.5-2)
[2013-05-11 20:40] [PACMAN] upgraded smbclient (4.0.5-1 -> 4.0.5-2)
[2013-05-11 20:40] [PACMAN] upgraded gnome-control-center (3.8.1-1 -> 3.8.1.5-1)
[2013-05-11 20:40] [PACMAN] upgraded gnome-icon-theme-symbolic (3.8.0.1-1 -> 3.8.0.1-2)
[2013-05-11 20:40] [PACMAN] upgraded gnome-keyring (3.8.1-1 -> 3.8.2-1)
[2013-05-11 20:40] [PACMAN] upgraded gpgme (1.4.0-1 -> 1.4.1-1)
[2013-05-11 20:40] [PACMAN] upgraded gst-plugins-good (1.0.7-1 -> 1.0.7-2)
[2013-05-11 20:40] [PACMAN] upgraded gstreamer0.10-bad (0.10.23-3 -> 0.10.23-4)
[2013-05-11 20:40] [PACMAN] upgraded mjpegtools (2.0.0-2 -> 2.0.0-3)
[2013-05-11 20:40] [PACMAN] upgraded gstreamer0.10-bad-plugins (0.10.23-3 -> 0.10.23-4)
[2013-05-11 20:40] [PACMAN] upgraded gstreamer0.10-good (0.10.31-1 -> 0.10.31-3)
[2013-05-11 20:40] [ALPM-SCRIPTLET]
[2013-05-11 20:40] [ALPM-SCRIPTLET] (gconftool-2:5073): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
[2013-05-11 20:40] [ALPM-SCRIPTLET] /usr/bin/dbus-launch terminated abnormally with the following error: No protocol specified
[2013-05-11 20:40] [ALPM-SCRIPTLET] Autolaunch error: X11 initialization failed.
[2013-05-11 20:40] [ALPM-SCRIPTLET]
[2013-05-11 20:40] [ALPM-SCRIPTLET]
[2013-05-11 20:40] [ALPM-SCRIPTLET] (gconftool-2:5081): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
[2013-05-11 20:40] [ALPM-SCRIPTLET] /usr/bin/dbus-launch terminated abnormally with the following error: No protocol specified
[2013-05-11 20:40] [ALPM-SCRIPTLET] Autolaunch error: X11 initialization failed.
[2013-05-11 20:40] [ALPM-SCRIPTLET]
[2013-05-11 20:40] [PACMAN] upgraded gstreamer0.10-good-plugins (0.10.31-1 -> 0.10.31-3)
[2013-05-11 20:40] [PACMAN] upgraded gtkmm3 (3.8.0-1 -> 3.8.1-1)
[2013-05-11 20:41] [PACMAN] upgraded gvfs (1.16.1-1 -> 1.16.1-2)
[2013-05-11 20:41] [PACMAN] upgraded gvfs-obexftp (1.16.1-1 -> 1.16.1-2)
[2013-05-11 20:41] [PACMAN] upgraded jre7-openjdk-headless (7.u21_2.3.9-1 -> 7.u21_2.3.9-2)
[2013-05-11 20:41] [PACMAN] upgraded jre7-openjdk (7.u21_2.3.9-1 -> 7.u21_2.3.9-2)
[2013-05-11 20:41] [PACMAN] upgraded icedtea-web-java7 (1.3.2-1 -> 1.4-1)
[2013-05-11 20:41] [PACMAN] upgraded icoutils (0.30.0-1 -> 0.30.0-2)
[2013-05-11 20:41] [PACMAN] upgraded imagemagick (6.8.4.10-1 -> 6.8.5.3-1)
[2013-05-11 20:41] [PACMAN] upgraded imlib2 (1.4.5-2 -> 1.4.5-4)
[2013-05-11 20:41] [PACMAN] upgraded iproute2 (3.8.0-1 -> 3.9.0-1)
[2013-05-11 20:41] [PACMAN] upgraded qtwebkit (2.3.1-1 -> 2.3.1-2)
[2013-05-11 20:41] [PACMAN] upgraded kdelibs (4.10.2-3 -> 4.10.3-3)
[2013-05-11 20:41] [PACMAN] upgraded poppler-qt (0.22.3-2 -> 0.22.3-3)
[2013-05-11 20:41] [PACMAN] upgraded nepomuk-core (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:41] [PACMAN] upgraded kactivities (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:41] [PACMAN] upgraded kde-base-artwork (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:41] [PACMAN] upgraded kde-wallpapers (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:41] [PACMAN] upgraded oxygen-icons (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:42] [PACMAN] upgraded kdebase-runtime (4.10.2-3 -> 4.10.3-1)
[2013-05-11 20:42] [PACMAN] upgraded kdeaccessibility-jovie (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:42] [PACMAN] upgraded kdeaccessibility-kaccessible (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:42] [PACMAN] upgraded kdeaccessibility-kmag (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:42] [PACMAN] upgraded kdeaccessibility-kmousetool (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:42] [PACMAN] upgraded kdeaccessibility-kmouth (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:42] [PACMAN] upgraded kdeadmin-kcron (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:42] [PACMAN] upgraded kdeadmin-ksystemlog (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:42] [PACMAN] upgraded kdepimlibs (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:42] [PACMAN] upgraded kdeadmin-kuser (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:42] [PACMAN] upgraded kdeartwork-colorschemes (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:42] [PACMAN] upgraded kdeartwork-desktopthemes (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:42] [PACMAN] upgraded kdeartwork-emoticons (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:42] [PACMAN] upgraded kdeartwork-iconthemes (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:42] [PACMAN] upgraded kdepim-runtime (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:42] [ALPM] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
[2013-05-11 20:43] [PACMAN] upgraded kdebase-workspace (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded libkexiv2 (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeartwork-kscreensaver (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeartwork-sounds (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeartwork-styles (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeartwork-wallpapers (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeartwork-weatherwallpapers (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdebase-lib (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded nepomuk-widgets (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdebase-dolphin (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdebase-katepart (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdebase-kdepasswd (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdebase-kdialog (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdebase-keditbookmarks (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdebase-kfind (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdebase-konqueror (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdebase-konq-plugins (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdebase-konsole (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdebase-kwrite (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdebase-plasma (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdebindings-python-common (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdebindings-python2 (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeedu-analitza (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeedu-blinken (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeedu-cantor (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded libkdeedu (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeedu-kalgebra (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeedu-kalzium (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeedu-kanagram (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeedu-kbruch (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeedu-kgeography (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeedu-khangman (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeedu-kig (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeedu-kiten (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:43] [PACMAN] upgraded kdeedu-klettres (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdeedu-kmplot (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdeedu-kstars (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdeedu-ktouch (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdeedu-kturtle (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdeedu-kwordquiz (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdeedu-marble (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdeedu-pairs (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdeedu-parley (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdeedu-rocs (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdeedu-step (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded libkdegames (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-bomber (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-bovo (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-granatier (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-kajongg (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-kapman (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-katomic (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-kblackbox (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-kblocks (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-kbounce (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-kbreakout (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-kdiamond (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-kfourinline (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-kgoldrunner (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-kigo (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-killbots (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-kiriki (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:44] [PACMAN] upgraded kdegames-kjumpingcube (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-klickety (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-klines (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded libkmahjongg (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-kmahjongg (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-kmines (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-knavalbattle (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-knetwalk (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-kolf (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-kollision (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-konquest (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-kpatience (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-kreversi (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-kshisen (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-ksirk (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-ksnakeduel (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-kspaceduel (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-ksquares (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-ksudoku (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-ktuberling (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-kubrick (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-lskat (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegames-palapeli (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded libkipi (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegraphics-gwenview (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegraphics-kamera (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegraphics-kcolorchooser (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegraphics-kgamma (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegraphics-kolourpaint (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegraphics-kruler (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegraphics-ksnapshot (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegraphics-mobipocket (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdegraphics-okular (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdenetwork-filesharing (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:45] [PACMAN] upgraded kdenetwork-kdnssd (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdenetwork-kget (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdenetwork-kopete (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdenetwork-kppp (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdenetwork-krdc (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdenetwork-krfb (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-libkdepim (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-akonadiconsole (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-akregator (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-blogilo (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-console (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-kaddressbook (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-kalarm (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-kjots (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-kleopatra (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-kmail (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-knode (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-knotes (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-kontact (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-korganizer (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-kresources (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-ktimetracker (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdepim-ktnef (4.10.2-2 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdeplasma-addons-applets-bball (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdeplasma-addons-applets-binary-clock (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdeplasma-addons-applets-blackboard (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdeplasma-addons-applets-bookmarks (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdeplasma-addons-applets-bubblemon (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdeplasma-addons-applets-calculator (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdeplasma-addons-applets-charselect (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdeplasma-addons-libs (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdeplasma-addons-applets-comic (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdeplasma-addons-applets-community (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kdeplasma-addons-applets-dict (4.10.2-1 -> 4.10.3-1)
[2013-05-11 20:46] [PACMAN] upgraded kHere is the info requested.
[slimg00dy@Myhouse ~]$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
sysdefault:CARD=SB
HDA ATI SB, ALC889 Analog
Default Audio Device
front:CARD=SB,DEV=0
HDA ATI SB, ALC889 Analog
Front speakers
surround40:CARD=SB,DEV=0
HDA ATI SB, ALC889 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=SB,DEV=0
HDA ATI SB, ALC889 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=SB,DEV=0
HDA ATI SB, ALC889 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=SB,DEV=0
HDA ATI SB, ALC889 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=SB,DEV=0
HDA ATI SB, ALC889 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=SB,DEV=0
HDA ATI SB, ALC889 Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, HDMI 1
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, HDMI 2
HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
HDA NVidia, HDMI 3
HDMI Audio Output
sysdefault:CARD=Headset
Logitech USB Headset, USB Audio
Default Audio Device
front:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
Front speakers
surround40:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Headset,DEV=0
Logitech USB Headset, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
sysdefault:CARD=Audio
Plantronics Wireless Audio, USB Audio
Default Audio Device
front:CARD=Audio,DEV=0
Plantronics Wireless Audio, USB Audio
Front speakers
surround40:CARD=Audio,DEV=0
Plantronics Wireless Audio, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Audio,DEV=0
Plantronics Wireless Audio, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Audio,DEV=0
Plantronics Wireless Audio, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Audio,DEV=0
Plantronics Wireless Audio, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Audio,DEV=0
Plantronics Wireless Audio, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
[slimg00dy@Myhouse ~]$ -
BUG? Music Player in iTunes is broken after update to 10.5
I updated to iTunes 10.5.0.142 so that I could load the new ios on my iPad. My music player worked flawlessly prior to the update, but now every single song in my library plays distorted. Most songs are mp3's that I've ripped myself so I can play these on other players and verify it's not the audio file. Every song playing through iTunes sounds like static, heavy synth, and cymbals. I can tell it's the song I'm selecting, but it just doesn't sound right - maybe like you're listening to it on an FM radio channel and you're 2 clicks way (trying to listen to 94.7 FM on 94.9 FM, for example).
I attempted to resolve by first "repairing" iTunes and then i uninstalled/reinstalled; nothing has worked. I tried getting Support from Apple but it wants me to pay for an issue with the "free" software...no thanks. Thankfully my hardware is working fine, albeit the iPad 1 is noticably SLOWER after this update.
Mp3s played through Windows Media, Spotify, or HP Play (for my Touchpad) are all good - just not iTunes. Is anyone else experiencing these issues using the iTunes music player? This seems like a serious software bug. Absolutely nothing changed on my computer except for the version of iTunes.I updated to 10.5.0.142 the day before yesterday when prompted but already had iTunes open, chose not to reboot my PC (as requested) but shut it down at the end of the day. Yesterday when I did boot up the PC and try to go into iTunes it just kept crashing - I got some sort of APPCRASH dialogue) before it could even open it! I tried rebooting again but got no further.
Then I deleted iTunes out of my programs and tried a reinstall, but STILL it kept crashing. So I then deleted it again and this time downloaded 10.4.1 from this link http://support.apple.com/kb/DL1427 (bottom of the page). All is now rosy again It did tell me that there is a newer version of iTunes as soon as i went in but obviously I ignored this and turned off the prompt I won't be upgrading for a few months or at least untill I hear that all is in working order.
Don't expect this sort of thing from Apple (and I hear that there are proplems with the latest iPhone OS upgrade). -
Hyperlinks broken after updating to 9.3.4
Since updating Adobe Standard to 9.3.4, all our hyperlinks are broken. It appears that if we put the linked document (Excel or Word) in the same path as the PDF (ie; both PDF and document are on the desktop) then the links work. However, the way our files are set up, all the PDF's are in one directory and all the linked documents are in a different location. They worked fine prior to the update; now none of them work.
I have tested this on two other computers. Works fine prior to running the update. Once the update is installed, none of the links work.I am still having problems trying to open a wmv file. I put the wmv in the same folder as the pdf yet it still will not open for me.
I have a pdf in a root that links to a pdf \folder\folder\1.pdf then that links to a 2.pdf in the same folder. Then 2.pdf has a link to open a wmv that is in the same folder.
Help on this will be greatly appreciated. -
I've updated to the latest OS (5.1) on my Apple TV 3.
YouTube, WSJ, MLB all have been broken since then.
I cannot login, search or watch any video on the Youtube app what-so-ever.
Stragely, Vimeo is still working.
I also noticed that when I go to Settings->General->About, activation status is 'failed'.
Has anyone gotten a solution, or solutions, to these problem?My AppleTV (3.0.1) can successfully login to youtube but did not show my favorites.
As a workaround, I went to youtube, logged in to my account and shared my favorites.
(http://www.youtube.com/account#sharing/activity)
P.S. Might be that YouTube changed it's APIs... Perhaps a new AppleTV release (3.0.2?)
will use the documented YouTube Data API.
Maybe you are looking for
-
Syncing to Creative cloud automatically from my desktop
Hi, I've read online that there is an app that will syn from a folder on my desktop automatically to the cloud, without me having to move the files over manually. When I follow the link to download the app it bring me here: https://creative.adobe.c
-
Get Information From File Name
Hi, I have a somewhat general question, is it possible to extract certain "elements" from a file name? For example: x0 xxx abc 123 xx xxxx.avi (or any type txt, jpg, and etc...). Assuming that the "abc" is constant throughout the files but the digits
-
Hello All, Sometime users are getting below error message on the IM windows when they having P2P IM Chat. "This message may not have been delivered to User Name because there was no response from the server." I can see below error on the Lync 2013
-
Best practices for migrating from 10.4 XServe to 10.5 XServe
Hi-- Suggestions welcomed for the following scenario. I have an almost 3-year-old XServe G5, running OS X Server 10.4.11. I have a brand new XServe Xeon on order, which of course will come with Server 10.5.(1). The following are the critical services
-
BAPI or RFM for Travel & Expenses Data (TRIP)
Hi, I need a RFM OR BAPI for travel and expenses where the input will be only personal no.It should display all the trip data Thanks in Advance Hema